From 76b89b4a9cba0ce19033458f69f76f4130e9c628 Mon Sep 17 00:00:00 2001 From: paul Date: Sat, 6 Nov 2004 17:13:09 +0000 Subject: 2004-11-06 Paul Jakma * defines.texi.in: New file, texi variables should be set here, autoconf substitution is available. Define common AUTHORS, COPYRIGHT_YEAR and COPYRIGHT_STR vars. * (global): Make use of makeinfo node pointer auto-creation to avoid having to fully specify links for nodes, so we only have to specify current node name - simplifies text slightly. Remove extraneous newlines which appear to cause extra blank pages to be added in output. Update copyright strings which appear in various places to use the new COPYRIGHT_STR texinfo variable. Change url to uref, the former need not output an actual hyperlink depending on version of texinfo, the latter should if supported by the format (eg PDF). * texinfo.tex: Update to a more recent version. previous file was many many years old. This file should possibly be removed altogether, and allowed to be installed by automake. * quagga.texi: Make use of automake's version.texi feature to have VERSION and some other vars auto-defined. include defines.texi. Change copyright strings to use the COPYRIGHT_STR variable. * install.texi: Make the privs section an actual section. Ditto for the Linux notes. * overview.texi: Supply URL for Quagga, where format allows. Tidy up one or two paragraphs slightly. Update the section on supported platforms. Remove the ZNOG list stuff, direct reader to the website for further information on email lists. * vtysh.texi: Update the integrated config file section. Make the commands sections so correct PDF indexes are built. --- doc/.cvsignore | 4 + doc/ChangeLog | 32 + doc/Makefile.am | 5 +- doc/appendix.texi | 3 +- doc/basic.texi | 77 +- doc/bgpd.texi | 128 +- doc/defines.texi.in | 13 + doc/filter.texi | 38 +- doc/install.texi | 107 +- doc/ipv6.texi | 6 +- doc/kernel.texi | 3 +- doc/main.texi | 13 +- doc/ospf6d.texi | 18 +- doc/ospfd.texi | 24 +- doc/overview.texi | 243 +- doc/protocol.texi | 3 +- doc/quagga.texi | 45 +- doc/ripd.texi | 41 +- doc/ripngd.texi | 15 +- doc/routemap.texi | 18 +- doc/snmp.texi | 20 +- doc/texinfo.tex | 7002 ++++++++++++++++++++++++++++++--------------------- doc/vtysh.texi | 52 +- 23 files changed, 4557 insertions(+), 3353 deletions(-) create mode 100644 doc/defines.texi.in diff --git a/doc/.cvsignore b/doc/.cvsignore index ed7665be..1b6e6bc4 100644 --- a/doc/.cvsignore +++ b/doc/.cvsignore @@ -1,13 +1,17 @@ Makefile Makefile.in +mdate-sh draft-zebra-00.txt zebra.info-* zebra.html +defines.texi +version.texi quagga.info* quagga.html quagga.pdf quagga.ps quagga.dvi +stamp-vti .nfs* *.aux *.cp diff --git a/doc/ChangeLog b/doc/ChangeLog index 736f7f6e..074b78a6 100644 --- a/doc/ChangeLog +++ b/doc/ChangeLog @@ -1,3 +1,35 @@ +2004-11-06 Paul Jakma + + * defines.texi.in: New file, texi variables should be set here, + autoconf substitution is available. Define common AUTHORS, + COPYRIGHT_YEAR and COPYRIGHT_STR vars. + * (global): Make use of makeinfo node pointer auto-creation + to avoid having to fully specify links for nodes, so we only have + to specify current node name - simplifies text slightly. + Remove extraneous newlines which appear to cause extra blank pages + to be added in output. + Update copyright strings which appear in various places to + use the new COPYRIGHT_STR texinfo variable. + Change url to uref, the former need not output an actual + hyperlink depending on version of texinfo, the latter should if + supported by the format (eg PDF). + * texinfo.tex: Update to a more recent version. previous file + was many many years old. This file should possibly be removed + altogether, and allowed to be installed by automake. + * quagga.texi: Make use of automake's version.texi feature to + have VERSION and some other vars auto-defined. include + defines.texi. Change copyright strings to use the COPYRIGHT_STR + variable. + * install.texi: Make the privs section an actual section. Ditto for + the Linux notes. + * overview.texi: Supply URL for Quagga, where format allows. Tidy up + one or two paragraphs slightly. + Update the section on supported platforms. + Remove the ZNOG list stuff, direct reader to the website for + further information on email lists. + * vtysh.texi: Update the integrated config file section. Make the + commands sections so correct PDF indexes are built. + 2004-10-12 Hasso Tepper * snmp.texi: ospf6d supports SNMP as well now. diff --git a/doc/Makefile.am b/doc/Makefile.am index 16194533..916450f3 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -2,9 +2,12 @@ info_TEXINFOS = quagga.texi +BUILT_SOURCES = defines.texi + quagga_TEXINFOS = appendix.texi basic.texi bgpd.texi filter.texi install.texi \ ipv6.texi kernel.texi main.texi ospf6d.texi ospfd.texi overview.texi \ - protocol.texi ripd.texi ripngd.texi routemap.texi snmp.texi vtysh.texi + protocol.texi ripd.texi ripngd.texi routemap.texi snmp.texi vtysh.texi \ + defines.texi man_MANS = vtysh.1 bgpd.8 ospf6d.8 ospfd.8 ripd.8 ripngd.8 zebra.8 diff --git a/doc/appendix.texi b/doc/appendix.texi index ecc6d9e5..87276c52 100644 --- a/doc/appendix.texi +++ b/doc/appendix.texi @@ -1,5 +1,4 @@ -@node Packet Binary Dump Format, , Zebra Protocol, Top -@comment node-name, next, previous, up +@node Packet Binary Dump Format @appendix Packet Binary Dump Format Quagga can dump routing protocol packet into file with a binary format diff --git a/doc/basic.texi b/doc/basic.texi index 6b510167..ab976445 100644 --- a/doc/basic.texi +++ b/doc/basic.texi @@ -1,5 +1,4 @@ @node Basic commands -@comment node-name, next, previous, up @chapter Basic commands There are five routing daemons in use, and there is one manager daemon. @@ -23,8 +22,7 @@ daemons. -@node Config Commands, Common Invocation Options, Basic commands, Basic commands -@comment node-name, next, previous, up +@node Config Commands @section Config Commands @cindex Configuration files for running the software @@ -64,8 +62,7 @@ options when starting the daemon. -@node Basic Config Commands, Sample Config File, Config Commands, Config Commands -@comment node-name, next, previous, up +@node Basic Config Commands @subsection Basic Config Commands @deffn Command {hostname @var{hostname}} {} @@ -138,7 +135,7 @@ to all VTY interfaces. @end deffn @deffn Command {show version} {} -Show the current version of the Quagga and its build host information. +Show the current version of @value{PACKAGE_NAME} and its build host information. @end deffn @deffn Command {line vty} {} @@ -172,8 +169,7 @@ Restrict vty connections with an access list. -@node Sample Config File, , Basic Config Commands, Config Commands -@comment node-name, next, previous, up +@node Sample Config File @subsection Sample Config File @@ -208,13 +204,12 @@ comment and the password is set to 'zebra!password'. -@node Common Invocation Options, Virtual Terminal Interfaces, Config Commands, Basic commands -@comment node-name, next, previous, up +@node Common Invocation Options @section Common Invocation Options @c COMMON_OPTIONS @c OPTIONS section of the man page -These options apply to all Quagga daemons. +These options apply to all @value{PACKAGE_NAME} daemons. @table @samp @@ -241,7 +236,7 @@ stop}. The file name is an run-time option rather than a configure-time option so that multiple routing daemons can be run simultaneously. This is -useful when using Quagga to implement a routing looking glass. One +useful when using @value{PACKAGE_NAME} to implement a routing looking glass. One machine can be used to collect differing routing views from differing points in the network. @@ -267,8 +262,7 @@ Print program version. -@node Virtual Terminal Interfaces, , Common Invocation Options, Basic commands -@comment node-name, next, previous, up +@node Virtual Terminal Interfaces @section Virtual Terminal Interfaces VTY -- Virtual Terminal [aka TeletYpe] Interface is a command line @@ -282,8 +276,7 @@ interface (CLI) for user interaction with the routing daemon. -@node VTY Overview, VTY Modes, Virtual Terminal Interfaces, Virtual Terminal Interfaces -@comment node-name, next, previous, up +@node VTY Overview @subsection VTY Overview @@ -300,9 +293,8 @@ Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. -Hello, this is zebra (version @value{VERSION}) -Copyright 1997-2000 Kunihiro Ishiguro - +Hello, this is @value{PACKAGE_NAME} (version @value{VERSION}) +@value{COPYRIGHT_STR} User Access Verification @@ -326,13 +318,9 @@ Router# '?' is very useful for looking up commands. - - -@node VTY Modes, VTY CLI Commands, VTY Overview, Virtual Terminal Interfaces -@comment node-name, next, previous, up +@node VTY Modes @subsection VTY Modes - There are three basic VTY modes: @menu @@ -343,10 +331,7 @@ There are three basic VTY modes: There are commands that may be restricted to specific VTY modes. - - -@node VTY View Mode, VTY Enable Mode, VTY Modes, VTY Modes -@comment node-name, next, previous, up +@node VTY View Mode @subsubsection VTY View Mode @c to be written (gpoul) @@ -354,33 +339,25 @@ There are commands that may be restricted to specific VTY modes. This mode is for read-only access to the CLI. One may exit the mode by leaving the system, or by entering @code{enable} mode. - - -@node VTY Enable Mode, VTY Other Modes, VTY View Mode, VTY Modes -@comment node-name, next, previous, up +@node VTY Enable Mode @subsubsection VTY Enable Mode - @c to be written (gpoul) This mode is for read-write access to the CLI. One may exit the mode by leaving the system, or by escaping to view mode. - - -@node VTY Other Modes, , VTY Enable Mode, VTY Modes -@comment node-name, next, previous, up +@node VTY Other Modes @subsubsection VTY Other Modes @c to be written (gpoul) This page is for describing other modes. -@node VTY CLI Commands, , VTY Modes, Virtual Terminal Interfaces -@comment node-name, next, previous, up +@node VTY CLI Commands @subsection VTY CLI Commands - -Commands that you may use at the command-line are described in the following three subsubsections. +Commands that you may use at the command-line are described in the following +three subsubsections. @menu * CLI Movement Commands:: Commands for moving the cursor about @@ -388,13 +365,9 @@ Commands that you may use at the command-line are described in the following thr * CLI Advanced Commands:: Other commands, session management and so on @end menu - - -@node CLI Movement Commands, CLI Editing Commands, VTY CLI Commands, VTY CLI Commands -@comment node-name, next, previous, up +@node CLI Movement Commands @subsubsection CLI Movement Commands - These commands are used for moving the CLI cursor. The @key{C} character means press the Control Key. @@ -430,13 +403,9 @@ Move to the end of the line. @end table - - -@node CLI Editing Commands, CLI Advanced Commands, CLI Movement Commands, VTY CLI Commands -@comment node-name, next, previous, up +@node CLI Editing Commands @subsubsection CLI Editing Commands - These commands are used for editing text on a line. The @key{C} character means press the Control Key. @@ -474,13 +443,9 @@ Transpose character. @end table - - -@node CLI Advanced Commands, , CLI Editing Commands, VTY CLI Commands -@comment node-name, next, previous, up +@node CLI Advanced Commands @subsubsection CLI Advanced Commands - There are several additional CLI commands for command line completions, insta-help, and VTY session management. diff --git a/doc/bgpd.texi b/doc/bgpd.texi index bdec6881..dab367c0 100644 --- a/doc/bgpd.texi +++ b/doc/bgpd.texi @@ -1,9 +1,8 @@ @c -*-texinfo-*- @c This is part of the Quagga Manual. -@c Copyright (C) 1999, 2000, 2001 2002 Kunihiro Ishiguro -@c See file zebra.texi for copying conditions. +@c @value{COPYRIGHT_STR} +@c See file quagga.texi for copying conditions. @node BGP -@comment node-name, next, previous, up @chapter BGP BGP stands for a Border Gateway Protocol. The lastest BGP version @@ -34,8 +33,7 @@ support to BGP-4. * Dump BGP packets and table:: @end menu -@node Starting BGP, BGP router, BGP, BGP -@comment node-name, next, previous, up +@node Starting BGP @section Starting BGP Default configuration file of @command{bgpd} is @file{bgpd.conf}. @@ -56,8 +54,7 @@ Set the bgp protocol's port number. When program terminates, retain BGP routes added by zebra. @end table -@node BGP router, BGP network, Starting BGP, BGP -@comment node-name, next, previous, up +@node BGP router @section BGP router First of all you must configure BGP router with @command{router bgp} @@ -89,8 +86,7 @@ so @code{router-id} is set to 0.0.0.0. So please set router-id by hand. * BGP decision process:: @end menu -@node BGP distance, BGP decision process, BGP router, BGP router -@comment node-name, next, previous, up +@node BGP distance @subsection BGP distance @deffn {BGP} {distance bgp <1-255> <1-255> <1-255>} {} @@ -103,8 +99,7 @@ value for external routes, internal routes and local routes. This command set distance value to @end deffn -@node BGP decision process, , BGP distance, BGP router -@comment node-name, next, previous, up +@node BGP decision process @subsection BGP decision process @table @asis @@ -121,8 +116,7 @@ This command set distance value to @item 6. MED check. @end table -@node BGP network, BGP Peer, BGP router, BGP -@comment node-name, next, previous, up +@node BGP network @section BGP network @menu @@ -131,8 +125,7 @@ This command set distance value to * Redistribute to BGP:: @end menu -@node BGP route, Route Aggregation, BGP network, BGP network -@comment node-name, next, previous, up +@node BGP route @subsection BGP route @deffn {BGP} {network @var{A.B.C.D/M}} {} @@ -152,8 +145,7 @@ doesn't care about IGP routes when announcing its routes. @deffn {BGP} {no network @var{A.B.C.D/M}} {} @end deffn -@node Route Aggregation, Redistribute to BGP, BGP route, BGP network -@comment node-name, next, previous, up +@node Route Aggregation @subsection Route Aggregation @deffn {BGP} {aggregate-address @var{A.B.C.D/M}} {} @@ -173,8 +165,7 @@ not be announce. @deffn {BGP} {no aggregate-address @var{A.B.C.D/M}} {} @end deffn -@node Redistribute to BGP, , Route Aggregation, BGP network -@comment node-name, next, previous, up +@node Redistribute to BGP @subsection Redistribute to BGP @deffn {BGP} {redistribute kernel} {} @@ -197,8 +188,7 @@ Redistribute RIP route to BGP process. Redistribute OSPF route to BGP process. @end deffn -@node BGP Peer, BGP Peer Group, BGP network, BGP -@comment node-name, next, previous, up +@node BGP Peer @section BGP Peer @menu @@ -207,8 +197,7 @@ Redistribute OSPF route to BGP process. * Peer filtering:: @end menu -@node Defining Peer, BGP Peer commands, BGP Peer, BGP Peer -@comment node-name, next, previous, up +@node Defining Peer @subsection Defining Peer @deffn {BGP} {neighbor @var{peer} remote-as @var{asn}} {} @@ -230,8 +219,7 @@ can't find neighbor 10.0.0.1 @end example @end deffn -@node BGP Peer commands, Peer filtering, Defining Peer, BGP Peer -@comment node-name, next, previous, up +@node BGP Peer commands @subsection BGP Peer commands In a @code{router bgp} clause there are neighbor specific configurations @@ -306,8 +294,7 @@ routes. @deffnx {BGP} {no neighbor @var{peer} maximum-prefix @var{number}} {} @end deffn -@node Peer filtering, , BGP Peer commands, BGP Peer -@comment node-name, next, previous, up +@node Peer filtering @subsection Peer filtering @deffn {BGP} {neighbor @var{peer} distribute-list @var{name} [in|out]} {} @@ -327,8 +314,7 @@ Apply a route-map on the neighbor. @var{direct} must be @code{in} or @end deffn @c ----------------------------------------------------------------------- -@node BGP Peer Group, BGP Address Family, BGP Peer, BGP -@comment node-name, next, previous, up +@node BGP Peer Group @section BGP Peer Group @deffn {BGP} {neighbor @var{word} peer-group} {} @@ -339,16 +325,14 @@ This command defines a new peer group. This command bind specific peer to peer group @var{word}. @end deffn -@node BGP Address Family, Autonomous System, BGP Peer Group, BGP -@comment node-name, next, previous, up +@node BGP Address Family @section BGP Address Family @page @c ----------------------------------------------------------------------- -@node Autonomous System, BGP Communities Attribute, BGP Address Family, BGP -@comment node-name, next, previous, up +@node Autonomous System @section Autonomous System AS (Autonomous System) is one of the essential element of BGP. BGP @@ -370,8 +354,7 @@ Internet. * Private AS Numbers:: @end menu -@node AS Path Regular Expression, Display BGP Routes by AS Path, Autonomous System, Autonomous System -@comment node-name, next, previous, up +@node AS Path Regular Expression @subsection AS Path Regular Expression AS path regular expression can be used for displaying BGP routes and @@ -403,8 +386,7 @@ used for AS value boundaries match. @code{show ip bgp regexp _7675_} matches to all of BGP routes which as AS number include @var{7675}. @end table -@node Display BGP Routes by AS Path, AS Path Access List, AS Path Regular Expression, Autonomous System -@comment node-name, next, previous, up +@node Display BGP Routes by AS Path @subsection Display BGP Routes by AS Path To show BGP routes which has specific AS path information @code{show @@ -415,8 +397,7 @@ This commands display BGP routes that matches AS path regular expression @var{line}. @end deffn -@node AS Path Access List, Using AS Path in Route Map, Display BGP Routes by AS Path, Autonomous System -@comment node-name, next, previous, up +@node AS Path Access List @subsection AS Path Access List AS path access list is user defined AS path. @@ -429,8 +410,7 @@ This command defines a new AS path access list. @deffnx {Command} {no ip as-path access-list @var{word} @{permit|deny@} @var{line}} {} @end deffn -@node Using AS Path in Route Map, Private AS Numbers, AS Path Access List, Autonomous System -@comment node-name, next, previous, up +@node Using AS Path in Route Map @subsection Using AS Path in Route Map @deffn {Route Map} {match as-path @var{word}} {} @@ -439,14 +419,12 @@ This command defines a new AS path access list. @deffn {Route Map} {set as-path prepend @var{as-path}} {} @end deffn -@node Private AS Numbers, , Using AS Path in Route Map, Autonomous System -@comment node-name, next, previous, up +@node Private AS Numbers @subsection Private AS Numbers @page @c ----------------------------------------------------------------------- -@node BGP Communities Attribute, BGP Extended Communities Attribute, Autonomous System, BGP -@comment node-name, next, previous, up +@node BGP Communities Attribute @section BGP Communities Attribute BGP communities attribute is widely used for implementing policy @@ -500,8 +478,7 @@ values are sorted in numerical order. * Using BGP Communities Attribute:: @end menu -@node BGP Community Lists, Numbered BGP Community Lists, BGP Communities Attribute, BGP Communities Attribute -@comment node-name, next, previous, up +@node BGP Community Lists @subsection BGP Community Lists BGP community list is a user defined BGP communites attribute list. @@ -563,8 +540,7 @@ Named Community standard list CLIST @end example @end deffn -@node Numbered BGP Community Lists, BGP Community in Route Map, BGP Community Lists, BGP Communities Attribute -@comment node-name, next, previous, up +@node Numbered BGP Community Lists @subsection Numbered BGP Community Lists When number is used for BGP community list name, the number has @@ -596,8 +572,7 @@ list. This feature is left for backward compability. Use of this feature is not recommended. @end deffn -@node BGP Community in Route Map, Display BGP Routes by Community, Numbered BGP Community Lists, BGP Communities Attribute -@comment node-name, next, previous, up +@node BGP Community in Route Map @subsection BGP Community in Route Map In Route Map (@pxref{Route Map}), we can match or set BGP @@ -637,8 +612,7 @@ is removed. When all of communities value is removed eventually, the BGP update's communities attribute is completely removed. @end deffn -@node Display BGP Routes by Community, Using BGP Communities Attribute, BGP Community in Route Map, BGP Communities Attribute -@comment node-name, next, previous, up +@node Display BGP Routes by Community @subsection Display BGP Routes by Community To show BGP routes which has specific BGP communities attribute, @@ -663,8 +637,7 @@ This commands display BGP routes that matches community list that have an exact match. @end deffn -@node Using BGP Communities Attribute, , Display BGP Routes by Community, BGP Communities Attribute -@comment node-name, next, previous, up +@node Using BGP Communities Attribute @subsection Using BGP Communities Attribute Following configuration is the most typical usage of BGP communities @@ -777,8 +750,7 @@ route-map RMAP permit 10 @end example @c ----------------------------------------------------------------------- -@node BGP Extended Communities Attribute, Displaying BGP routes, BGP Communities Attribute, BGP -@comment node-name, next, previous, up +@node BGP Extended Communities Attribute @section BGP Extended Communities Attribute BGP extended communities attribute is introduced with MPLS VPN/BGP @@ -818,8 +790,7 @@ This is a format to define IP address based Extended Community value. * BGP Extended Communities in Route Map:: @end menu -@node BGP Extended Community Lists, BGP Extended Communities in Route Map, BGP Extended Communities Attribute, BGP Extended Communities Attribute -@comment node-name, next, previous, up +@node BGP Extended Community Lists @subsection BGP Extended Community Lists Expanded Community Lists is a user defined BGP Expanded Community @@ -863,8 +834,7 @@ This command display current extcommunity-list information. When @end example @end deffn -@node BGP Extended Communities in Route Map, , BGP Extended Community Lists, BGP Extended Communities Attribute -@comment node-name, next, previous, up +@node BGP Extended Communities in Route Map @subsection BGP Extended Communities in Route Map @deffn {Route Map} {match extcommunity @var{word}} {} @@ -879,8 +849,7 @@ This command set Site of Origin value. @end deffn @c ----------------------------------------------------------------------- -@node Displaying BGP routes, Capability Negotiation, BGP Extended Communities Attribute, BGP -@comment node-name, next, previous, up +@node Displaying BGP routes @section Displaying BGP Routes @menu @@ -888,8 +857,7 @@ This command set Site of Origin value. * More Show IP BGP:: @end menu -@node Show IP BGP, More Show IP BGP, Displaying BGP routes, Displaying BGP routes -@comment node-name, next, previous, up +@node Show IP BGP @subsection Show IP BGP @deffn {Command} {show ip bgp} {} @@ -910,8 +878,7 @@ Origin codes: i - IGP, e - EGP, ? - incomplete Total number of prefixes 1 @end example -@node More Show IP BGP, , Show IP BGP, Displaying BGP routes -@comment node-name, next, previous, up +@node More Show IP BGP @subsection More Show IP BGP @deffn {Command} {show ip bgp regexp @var{line}} {} @@ -965,8 +932,7 @@ Clear peer using soft reconfiguration. @deffn {Command} {no debug keepalive} {} @end deffn -@node Capability Negotiation, Route Reflector, Displaying BGP routes, BGP -@comment node-name, next, previous, up +@node Capability Negotiation @section Capability Negotiation When adding IPv6 routing information exchange feature to BGP. There @@ -1033,8 +999,7 @@ Override the result of Capability Negotiation with local configuration. Ignore remote peer's capability value. @end deffn -@node Route Reflector, Route Server, Capability Negotiation, BGP -@comment node-name, next, previous, up +@node Route Reflector @section Route Reflector @deffn {BGP} {bgp cluster-id @var{a.b.c.d}} {} @@ -1044,8 +1009,7 @@ Ignore remote peer's capability value. @deffnx {BGP} {no neighbor @var{peer} route-reflector-client} {} @end deffn -@node Route Server, How to set up a 6-Bone connection, Route Reflector, BGP -@comment node-name, next, previous, up +@node Route Server @section Route Server At an Internet Exchange point, many ISPs are connected to each other by @@ -1071,8 +1035,7 @@ normal BGP router or Route Server or both at the same time. * Viewing the view:: @end menu -@node Multiple instance, BGP instance and view, Route Server, Route Server -@comment node-name, next, previous, up +@node Multiple instance @subsection Multiple instance To enable multiple view function of @code{bgpd}, you must turn on @@ -1132,8 +1095,7 @@ router bgp 1 Quagga style BGP configuration. This is default. @end deffn -@node BGP instance and view, Routing policy, Multiple instance, Route Server -@comment node-name, next, previous, up +@node BGP instance and view @subsection BGP instance and view BGP instance is a normal BGP process. The result of route selection @@ -1183,8 +1145,7 @@ router bgp 2 view 2 @end group @end example -@node Routing policy, Viewing the view, BGP instance and view, Route Server -@comment node-name, next, previous, up +@node Routing policy @subsection Routing policy You can set different routing policy for a peer. For example, you can @@ -1209,8 +1170,7 @@ This means BGP update from a peer 10.0.0.1 goes to both BGP view 1 and view applied. On the other hand, when the update is inserted into view 2, distribute-list 2 is applied. -@node Viewing the view, , Routing policy, Route Server -@comment node-name, next, previous, up +@node Viewing the view @subsection Viewing the view To display routing table of BGP view, you must specify view name. @@ -1219,8 +1179,7 @@ To display routing table of BGP view, you must specify view name. Display routing table of BGP view @var{name}. @end deffn -@node How to set up a 6-Bone connection, Dump BGP packets and table, Route Server, BGP -@comment node-name, next, previous, up +@node How to set up a 6-Bone connection @section How to set up a 6-Bone connection @example @@ -1268,8 +1227,7 @@ log file bgpd.log @end group @end example -@node Dump BGP packets and table, , How to set up a 6-Bone connection, BGP -@comment node-name, next, previous, up +@node Dump BGP packets and table @section Dump BGP packets and table @deffn Command {dump bgp all @var{path}} {} diff --git a/doc/defines.texi.in b/doc/defines.texi.in new file mode 100644 index 00000000..8a5867a1 --- /dev/null +++ b/doc/defines.texi.in @@ -0,0 +1,13 @@ +@c -*- texinfo -*- +@c @configure_input@ + +@c Set variables +@set PACKAGE_NAME @PACKAGE_NAME@ +@set AUTHORS Kunihiro Ishiguro, et al. +@set COPYRIGHT_YEAR 1999-2004 +@set COPYRIGHT_STR Copyright @copyright{} @value{COPYRIGHT_YEAR} @value{AUTHORS} + +@c These may vary with installation environment. +@set INSTALL_PREFIX_ETC /etc/quagga +@set INSTALL_PREFIX_SBIN /usr/sbin +@set INSTALL_PREFIX_STATE /var/run/quagga diff --git a/doc/filter.texi b/doc/filter.texi index 3a2af1c6..5a9a15ee 100644 --- a/doc/filter.texi +++ b/doc/filter.texi @@ -11,9 +11,9 @@ defined, it can be applied in any direction. * IP Prefix List:: @end menu -@node IP Access List, IP Prefix List, Filtering, Filtering +@node IP Access List @comment node-name, next, previous, up -@subsection IP Access List +@section IP Access List @deffn {Command} {access-list @var{name} permit @var{ipv4-network}} {} @deffnx {Command} {access-list @var{name} deny @var{ipv4-network}} {} @@ -27,9 +27,9 @@ access-list filter deny 10.0.0.0/9 access-list filter permit 10.0.0.0/8 @end example -@node IP Prefix List, , IP Access List, Filtering +@node IP Prefix List @comment node-name, next, previous, up -@subsection IP Prefix List +@section IP Prefix List @command{ip prefix-list} provides the most powerful prefix based filtering mechanism. In addition to @command{access-list} functionality, @@ -88,14 +88,8 @@ the new list will overwrite the old list. Matching of IP Prefix is performed from the smaller sequential number to the larger. The matching will stop once any rule has been applied. -In the case of no le or ge command, - -Version 0.85: the matching rule will apply to all prefix lengths that -matched the prefix list. - -Version 0.86 or later: In the case of no le or ge command, the prefix -length must match exactly the length specified in the prefix list. - +In the case of no le or ge command, the prefix length must match exactly the +length specified in the prefix list. @deffn {Command} {no ip prefix-list @var{name}} {} @end deffn @@ -107,9 +101,8 @@ length must match exactly the length specified in the prefix list. * Clear counter of ip prefix-list:: @end menu -@node ip prefix-list description, ip prefix-list sequential number control, IP Prefix List, IP Prefix List -@comment node-name, next, previous, up -@subsubsection ip prefix-list description +@node ip prefix-list description +@subsection ip prefix-list description @deffn {Command} {ip prefix-list @var{name} description @var{desc}} {} Descriptions may be added to prefix lists. This command adds a @@ -121,9 +114,8 @@ Deletes the description from a prefix list. It is possible to use the command without the full description. @end deffn -@node ip prefix-list sequential number control, Showing ip prefix-list, ip prefix-list description, IP Prefix List -@comment node-name, next, previous, up -@subsubsection ip prefix-list sequential number control +@node ip prefix-list sequential number control +@subsection ip prefix-list sequential number control @deffn {Command} {ip prefix-list sequence-number} {} With this command, the IP prefix list sequential number is displayed. @@ -135,9 +127,8 @@ With this command, the IP prefix list sequential number is not displayed. @end deffn -@node Showing ip prefix-list, Clear counter of ip prefix-list, ip prefix-list sequential number control, IP Prefix List -@comment node-name, next, previous, up -@subsubsection Showing ip prefix-list +@node Showing ip prefix-list +@subsection Showing ip prefix-list @deffn {Command} {show ip prefix-list} {} Display all IP prefix lists. @@ -175,9 +166,8 @@ displayed. @deffn {Command} {show ip prefix-list detail @var{name}} {} @end deffn -@node Clear counter of ip prefix-list, , Showing ip prefix-list, IP Prefix List -@comment node-name, next, previous, up -@subsubsection Clear counter of ip prefix-list +@node Clear counter of ip prefix-list +@subsection Clear counter of ip prefix-list @deffn {Command} {clear ip prefix-list} {} Clears the counters of all IP prefix lists. Clear IP Prefix List can be diff --git a/doc/install.texi b/doc/install.texi index 78379a8b..16e29c99 100644 --- a/doc/install.texi +++ b/doc/install.texi @@ -1,5 +1,4 @@ -@node Installation, Basic commands, Overview, Top -@comment node-name, next, previous, up +@node Installation @chapter Installation @cindex How to install Quagga @@ -8,16 +7,16 @@ @cindex Building the system @cindex Making Quagga - There are three steps for installing the software: configuration, +There are three steps for installing the software: configuration, compilation, and installation. @menu -* Configure the Software:: -* Build the Software:: -* Install the Software:: +* Configure the Software:: +* Build the Software:: +* Install the Software:: @end menu - The easiest way to get Quagga running is to issue the following +The easiest way to get Quagga running is to issue the following commands: @example @@ -26,20 +25,28 @@ commands: % make install @end example -@node Configure the Software, Build the Software, Installation, Installation -@comment node-name, next, previous, up +@node Configure the Software @section Configure the Software +@menu +* The Configure script and its options:: +* Least-Privilege support:: +* Linux notes:: +@end menu + +@node The Configure script and its options +@subsection The Configure script and its options + @cindex Configuration options @cindex Options for configuring @cindex Build options @cindex Distribution configuration @cindex Options to @code{./configure} - Quagga has an excellent configure script which -automatically detects most host configurations. There are several -additional configure options you can use to turn off IPv6 support, to -disable the compilation of specific daemons, and to enable SNMP support. +Quagga has an excellent configure script which automatically detects most +host configurations. There are several additional configure options you can +use to turn off IPv6 support, to disable the compilation of specific +daemons, and to enable SNMP support. @table @option @item --enable-guile @@ -106,10 +113,22 @@ Configure zebra to use @var{dir} for local state files, such as pid files and unix sockets. @end table -Additionally, you may configure zebra to drop its elevated -privileges shortly after startup and switch -to another user, there are three configure options -to control zebra's behaviour. +@example +% ./configure --disable-ipv6 +@end example + +This command will configure zebra and the routing daemons. + +@node Least-Privilege support +@subsection Least-Privilege support + +@cindex Quagga Least-Privileges +@cindex Quagga Privileges + +Additionally, you may configure zebra to drop its elevated privileges +shortly after startup and switch to another user. The configure script will +automatically try to configure this support. There are three configure +options to control the behaviour of Quagga daemons. @table @option @item --enable-user=@var{user} @@ -127,42 +146,35 @@ this group. @end table The default user and group which will be configured is 'quagga' if no user -or group is specified. Note that this user or group requires write access -to the local state directory (see --localstatedir) and requires at least -read access, and write access if you wish to allow daemons -to write out their configuration, to the configuration directory -(see --sysconfdir). +or group is specified. Note that this user or group requires write access to +the local state directory (see --localstatedir) and requires at least read +access, and write access if you wish to allow daemons to write out their +configuration, to the configuration directory (see --sysconfdir). On systems which have the 'libcap' capabilities manipulation library -(currently only linux), the quagga system will retain -only minimal capabilities required, further it will only raise these -capabilities for brief periods. On systems without libcap, quagga will run -as the user specified and only raise its uid back to uid 0 for brief -periods. +(currently only linux), the quagga system will retain only minimal +capabilities required, further it will only raise these capabilities for +brief periods. On systems without libcap, quagga will run as the user +specified and only raise its uid back to uid 0 for brief periods. -@example -% ./configure --disable-ipv6 -@end example - -This command will configure zebra and the routing daemons. +@node Linux notes +@subsection Linux Notes @cindex Configuring Quagga -@cindex Configuration the software build @cindex Building on Linux boxes @cindex Linux configurations There are several options available only to @sc{gnu}/Linux systems: -@footnote{GNU/Linux has very flexible kernel configuration features. If -you use GNU/Linux, make sure that the current kernel configuration is +@footnote{@sc{gnu}/Linux has very flexible kernel configuration features}. If +you use @sc{gnu}/Linux, make sure that the current kernel configuration is what you want. Quagga will run with any kernel configuration but some recommendations do exist. @table @var @item CONFIG_NETLINK -Kernel/User netlink socket. -This is a brand new feature which enables -an advanced interface between the Linux kernel and zebra (@pxref{Kernel Interface}). +Kernel/User netlink socket. This is a brand new feature which enables an +advanced interface between the Linux kernel and zebra (@pxref{Kernel Interface}). @item CONFIG_RTNETLINK Routing messages. @@ -172,8 +184,8 @@ updates directly from the kernel (@pxref{Kernel Interface}). @item CONFIG_IP_MULTICAST IP: multicasting. -This option should be specified when you use @command{ripd} or -@command{ospfd} because these protocols use multicast. +This option should be specified when you use @command{ripd} (@pxref{RIP}) or +@command{ospfd} (@pxref{OSPFv2}) because these protocols use multicast. @end table @@ -190,20 +202,18 @@ The @code{inet6-apps} package includes basic IPv6 related libraries such as @code{inet_ntop} and @code{inet_pton}. Some basic IPv6 programs such as @command{ping}, @command{ftp}, and @command{inetd} are also included. The @code{inet-apps} can be found at -@url{ftp://ftp.inner.net/pub/ipv6/}. +@uref{ftp://ftp.inner.net/pub/ipv6/}. @item net-tools The @code{net-tools} package provides an IPv6 enabled interface and routing utility. It contains @command{ifconfig}, @command{route}, @command{netstat}, and other tools. @code{net-tools} may be found at -@url{http://www.tazenda.demon.co.uk/phil/net-tools/}. +@uref{http://www.tazenda.demon.co.uk/phil/net-tools/}. @end table @c A - end of footnote -}. -@node Build the Software, Install the Software, Configure the Software, Installation -@comment node-name, next, previous, up +@node Build the Software @section Build the Software After configuring the software, you will need to compile it for your @@ -225,7 +235,7 @@ at this stage, be certain to send a bug report @xref{Bug Reports}. @c A - End of node, Building the Software -@node Install the Software, , Build the Software, Installation +@node Install the Software @comment node-name, next, previous, up @section Install the Software @@ -243,11 +253,6 @@ prompt: @command{make install}. % @end example -@c A - removed this section and placed it with Install the Software -@c @node Additional Notes, , Install the Software, Installation -@comment node-name, next, previous, up -@c @section Additional Notes - Quagga daemons have their own terminal interface or VTY. After installation, you have to setup each beast's port number to connect to them. Please add the following entries to @file{/etc/services}. diff --git a/doc/ipv6.texi b/doc/ipv6.texi index fb76a024..c740234e 100644 --- a/doc/ipv6.texi +++ b/doc/ipv6.texi @@ -1,5 +1,4 @@ -@node IPv6 Support, Kernel Interface, Route Map, Top -@comment node-name, next, previous, up +@node IPv6 Support @chapter IPv6 Support Quagga fully supports IPv6 routing. As described so far, Quagga supports @@ -13,8 +12,7 @@ messages to the all nodes that exist on the network. * Router Advertisement:: @end menu -@node Router Advertisement, , IPv6 Support, IPv6 Support -@comment node-name, next, previous, up +@node Router Advertisement @section Router Advertisement @deffn {Interface Command} {no ipv6 nd suppress-ra} {} diff --git a/doc/kernel.texi b/doc/kernel.texi index 5aac110f..67fbb5e3 100644 --- a/doc/kernel.texi +++ b/doc/kernel.texi @@ -1,5 +1,4 @@ -@node Kernel Interface, SNMP Support, IPv6 Support, Top -@comment node-name, next, previous, up +@node Kernel Interface @chapter Kernel Interface There are several different methods for reading kernel routing table diff --git a/doc/main.texi b/doc/main.texi index 81808e59..c13bdef5 100644 --- a/doc/main.texi +++ b/doc/main.texi @@ -1,5 +1,4 @@ @node Zebra -@comment node-name, next, previous, up @chapter Zebra @c SYNOPSIS @@ -15,8 +14,7 @@ different routing protocols. @end menu -@node Invoking zebra, Interface Commands, Zebra, Zebra -@comment node-name, next, previous, up +@node Invoking zebra @section Invoking zebra Besides the common invocation options (@pxref{Common Invocation Options}), the @@ -42,8 +40,7 @@ When program terminates, retain routes added by zebra. @end table -@node Interface Commands, Static Route Commands, Invoking zebra, Zebra -@comment node-name, next, previous, up +@node Interface Commands @section Interface Commands @deffn Command {interface @var{ifname}} {} @@ -90,8 +87,7 @@ only linux and with certain drivers - those which properly support the IFF_RUNNING flag. @end deffn -@node Static Route Commands, zebra Terminal Mode Commands, Interface Commands, Zebra -@comment node-name, next, previous, up +@node Static Route Commands @section Static Route Commands Static routing is a very fundamental feature of routing technology. It @@ -191,8 +187,7 @@ and later). After setting @var{tableno} with this command, static routes defined after this are added to the specified table. @end deffn -@node zebra Terminal Mode Commands, , Static Route Commands, Zebra -@comment node-name, next, previous, up +@node zebra Terminal Mode Commands @section zebra Terminal Mode Commands @deffn Command {show ip route} {} diff --git a/doc/ospf6d.texi b/doc/ospf6d.texi index e3ac3d27..5c5e60f3 100644 --- a/doc/ospf6d.texi +++ b/doc/ospf6d.texi @@ -1,5 +1,4 @@ -@node OSPFv3, BGP, OSPFv2, Top -@comment node-name, next, previous, up +@node OSPFv3 @chapter OSPFv3 @command{ospf6d} is a daemon support OSPF version 3 for IPv6 network. @@ -13,8 +12,7 @@ OSPF for IPv6 is described in RFC2740. * Showing OSPF6 information:: @end menu -@node OSPF6 router, OSPF6 area, OSPFv3, OSPFv3 -@comment node-name, next, previous, up +@node OSPF6 router @section OSPF6 router @deffn {Command} {router ospf6} {} @@ -29,14 +27,12 @@ Bind interface to specified area, and start sending OSPF packets. @var{area} ca be specified as 0. @end deffn -@node OSPF6 area, OSPF6 interface, OSPF6 router, OSPFv3 -@comment node-name, next, previous, up +@node OSPF6 area @section OSPF6 area Area support for OSPFv3 is not yet implemented. -@node OSPF6 interface, Redistribute routes to OSPF6, OSPF6 area, OSPFv3 -@comment node-name, next, previous, up +@node OSPF6 interface @section OSPF6 interface @deffn {Interface Command} {ipv6 ospf6 cost COST} {} @@ -63,8 +59,7 @@ Sets interface's Router Priority. Default value is 1. Sets interface's Inf-Trans-Delay. Default value is 1. @end deffn -@node Redistribute routes to OSPF6, Showing OSPF6 information, OSPF6 interface, OSPFv3 -@comment node-name, next, previous, up +@node Redistribute routes to OSPF6 @section Redistribute routes to OSPF6 @deffn {OSPF6 Command} {redistribute static} {} @@ -72,8 +67,7 @@ Sets interface's Inf-Trans-Delay. Default value is 1. @deffnx {OSPF6 Command} {redistribute ripng} {} @end deffn -@node Showing OSPF6 information, , Redistribute routes to OSPF6, OSPFv3 -@comment node-name, next, previous, up +@node Showing OSPF6 information @section Showing OSPF6 information @deffn {Command} {show ipv6 ospf6 [INSTANCE_ID]} {} diff --git a/doc/ospfd.texi b/doc/ospfd.texi index aa66ce15..789e9bf7 100644 --- a/doc/ospfd.texi +++ b/doc/ospfd.texi @@ -1,5 +1,4 @@ -@node OSPFv2, OSPFv3, RIPng, Top -@comment node-name, next, previous, up +@node OSPFv2 @chapter OSPFv2 OSPF version 2 is a routing protocol which described in @@ -18,8 +17,7 @@ networks such as ISP backbone and enterprise networks. * Debugging OSPF:: @end menu -@node Configuring ospfd, OSPF router, OSPFv2, OSPFv2 -@comment node-name, next, previous, up +@node Configuring ospfd @section Configuring ospfd There is no @command{ospfd} specific options. Common options can be @@ -31,8 +29,7 @@ please make it sure @command{zebra} is running before invoking Like other daemons, @command{ospfd} configuration is done in OSPF specific configuration file @file{ospfd.conf}. -@node OSPF router, OSPF area, Configuring ospfd, OSPFv2 -@comment node-name, next, previous, up +@node OSPF router @section OSPF router To start OSPF process you have to specify the OSPF router. As of this @@ -112,8 +109,7 @@ ospf on interface with address 192.168.1.1/23, but it does on interface with address 192.168.1.129/25. @end deffn -@node OSPF area, OSPF interface, OSPF router, OSPFv2 -@comment node-name, next, previous, up +@node OSPF area @section OSPF area @deffn {OSPF Command} {area @var{a.b.c.d} range @var{a.b.c.d/m}} {} @@ -244,8 +240,7 @@ makes sense in ABR only. @deffnx {OSPF Command} {area <0-4294967295> authentication message-digest} {} @end deffn -@node OSPF interface, Redistribute routes to OSPF, OSPF area, OSPFv2 -@comment node-name, next, previous, up +@node OSPF interface @section OSPF interface @deffn {Interface Command} {ip ospf authentication-key AUTH_KEY} {} @@ -318,8 +313,7 @@ incremented by this value when transmitting. The default value is 1 seconds. @end deffn -@node Redistribute routes to OSPF, Showing OSPF information, OSPF interface, OSPFv2 -@comment node-name, next, previous, up +@node Redistribute routes to OSPF @section Redistribute routes to OSPF @deffn {OSPF Command} {redistribute (kernel|connected|static|rip|bgp)} {} @@ -364,8 +358,7 @@ The default value is 1 seconds. @deffnx {Command} {no router zebra} {} @end deffn -@node Showing OSPF information, Debugging OSPF, Redistribute routes to OSPF, OSPFv2 -@comment node-name, next, previous, up +@node Showing OSPF information @section Showing OSPF information @deffn {Command} {show ip ospf} {} @@ -403,8 +396,7 @@ The default value is 1 seconds. @deffn {Command} {show ip ospf route} {} @end deffn -@node Debugging OSPF, , Showing OSPF information, OSPFv2 -@comment node-name, next, previous, up +@node Debugging OSPF @section Debugging OSPF @deffn {Command} {debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]} {} diff --git a/doc/overview.texi b/doc/overview.texi index df3c0859..12980379 100644 --- a/doc/overview.texi +++ b/doc/overview.texi @@ -1,28 +1,25 @@ -@node Overview, Installation, Top, Top -@comment node-name, next, previous, up +@node Overview @chapter Overview @cindex Overview - Quagga is a routing software package that provides TCP/IP based -routing services with routing protocols support such as RIPv1, RIPv2, -RIPng, OSPFv2, OSPFv3, BGP-4, and BGP-4+ (@pxref{Supported RFC}). -Quagga also supports special BGP Route Reflector and Route Server -behavior. In addition to traditional IPv4 routing protocols, Quagga -also supports IPv6 routing protocols. With SNMP daemon which supports -SMUX protocol, Quagga provides routing protocol MIBs (@pxref{SNMP -Support}). + @uref{http://www.quagga.net,,Quagga} is a routing software package that +provides TCP/IP based routing services with routing protocols support such +as RIPv1, RIPv2, RIPng, OSPFv2, OSPFv3, BGP-4, and BGP-4+ (@pxref{Supported +RFC}). Quagga also supports special BGP Route Reflector and Route Server +behavior. In addition to traditional IPv4 routing protocols, Quagga also +supports IPv6 routing protocols. With SNMP daemon which supports SMUX +protocol, Quagga provides routing protocol MIBs (@pxref{SNMP Support}). - Quagga uses an advanced software architecture to provide you with a -high quality, multi server routing engine. Quagga has an interactive -user interface for each routing protocol and supports common client -commands. Due to this design, you can add new protocol daemons to Quagga -easily. You can use Quagga library as your program's client user -interface. + Quagga uses an advanced software architecture to provide you with a high +quality, multi server routing engine. Quagga has an interactive user +interface for each routing protocol and supports common client commands. +Due to this design, you can add new protocol daemons to Quagga easily. You +can use Quagga library as your program's client user interface. - Zebra is distributed under the @sc{gnu} General Public License. + Quagga is distributed under the @sc{gnu} General Public License. @menu -* About Quagga:: Basic information about Quagga +* About Quagga:: Basic information about Quagga * System Architecture:: The Quagga system architecture * Supported Platforms:: Supported platforms and future plans * Supported RFC:: Supported RFCs @@ -31,51 +28,49 @@ interface. * Bug Reports:: Mail address for bug data @end menu -@node About Quagga, System Architecture, Overview, Overview +@node About Quagga @comment node-name, next, previous, up @section About Quagga @cindex About Quagga - Today, TCP/IP networks are covering all of the world. The Internet -has been deployed in many countries, companies, and to the home. When -you connect to the Internet your packet will pass many routers which -have TCP/IP routing functionality. + Today, TCP/IP networks are covering all of the world. The Internet has +been deployed in many countries, companies, and to the home. When you +connect to the Internet your packet will pass many routers which have TCP/IP +routing functionality. A system with Quagga installed acts as a dedicated router. With Quagga, -your machine exchanges routing information with other routers using -routing protocols. Quagga uses this information to update the kernel -routing table so that the right data goes to the right place. You can -dynamically change the configuration and you may view routing table -information from the Quagga terminal interface. +your machine exchanges routing information with other routers using routing +protocols. Quagga uses this information to update the kernel routing table +so that the right data goes to the right place. You can dynamically change +the configuration and you may view routing table information from the Quagga +terminal interface. Adding to routing protocol support, Quagga can setup interface's flags, -interface's address, static routes and so on. If you have a small -network, or a stub network, or xDSL connection, configuring the Quagga -routing software is very easy. The only thing you have to do is to set -up the interfaces and put a few commands about static routes and/or -default routes. If the network is rather large, or if the network -structure changes frequently, you will want to take advantage of Quagga's -dynamic routing protocol support for protocols such as RIP, OSPF or BGP. -Quagga is with you. +interface's address, static routes and so on. If you have a small network, +or a stub network, or xDSL connection, configuring the Quagga routing +software is very easy. The only thing you have to do is to set up the +interfaces and put a few commands about static routes and/or default routes. +If the network is rather large, or if the network structure changes +frequently, you will want to take advantage of Quagga's dynamic routing +protocol support for protocols such as RIP, OSPF or BGP. Traditionally, UNIX based router configuration is done by @command{ifconfig} and @command{route} commands. Status of routing -table is displayed by @command{netstat} utility. Almost of these -commands work only if the user has root privileges. Quagga has a different -system administration method. There are two user modes in Quagga. One is -normal mode, the other is enable mode. Normal mode user can only view -system status, enable mode user can change system configuration. This -UNIX account independent feature will be great help to the router -administrator. +table is displayed by @command{netstat} utility. Almost of these commands +work only if the user has root privileges. Quagga has a different system +administration method. There are two user modes in Quagga. One is normal +mode, the other is enable mode. Normal mode user can only view system +status, enable mode user can change system configuration. This UNIX account +independent feature will be great help to the router administrator. Currently, Quagga supports common unicast routing protocols. Multicast -routing protocols such as BGMP, PIM-SM, PIM-DM may be supported in -Quagga 2.0. MPLS support is going on. In the future, TCP/IP filtering -control, QoS control, diffserv configuration will be added to Quagga. -Quagga project's final goal is making a productive, quality, free TCP/IP -routing software. +routing protocols such as BGMP, PIM-SM, PIM-DM may be supported in Quagga +2.0. MPLS support is going on. In the future, TCP/IP filtering control, +QoS control, diffserv configuration will be added to Quagga. Quagga +project's final goal is making a productive, quality, free TCP/IP routing +software. -@node System Architecture, Supported Platforms, About Quagga, Overview +@node System Architecture @comment node-name, next, previous, up @section System Architecture @cindex System architecture @@ -84,23 +79,22 @@ routing software. Traditional routing software is made as a one process program which provides all of the routing protocol functionalities. Quagga takes a -different approach. It is made from a collection of several daemons -that work together to build the routing table. There may be several +different approach. It is made from a collection of several daemons that +work together to build the routing table. There may be several protocol-specific routing daemons and zebra the kernel routing manager. The @command{ripd} daemon handles the RIP protocol, while @command{ospfd} is a daemon which supports OSPF version 2. @command{bgpd} supports the BGP-4 protocol. For changing the kernel routing table and for redistribution of routes between different routing -protocols, there is a kernel routing table manager @command{zebra} -daemon. It is easy to add a new routing protocol daemons to the entire -routing system without affecting any other software. You need to run only -the protocol daemon associated with routing protocols in use. Thus, -user may run a specific daemon and send routing reports to a central -routing console. - - There is no need for these daemons to be running on the same machine. -You can even run several same protocol daemons on the same machine. This +protocols, there is a kernel routing table manager @command{zebra} daemon. +It is easy to add a new routing protocol daemons to the entire routing +system without affecting any other software. You need to run only the +protocol daemon associated with routing protocols in use. Thus, user may +run a specific daemon and send routing reports to a central routing console. + + There is no need for these daemons to be running on the same machine. You +can even run several same protocol daemons on the same machine. This architecture creates new possibilities for the routing system. @example @@ -120,29 +114,23 @@ architecture creates new possibilities for the routing system. @end example Multi-process architecture brings extensibility, modularity and -maintainability. At the same time it also brings many configuration -files and terminal interfaces. Each daemon has it's own configuration -file and terminal interface. When you configure a static route, it must -be done in @command{zebra} configuration file. When you configure BGP -network it must be done in @command{bgpd} configuration file. This can be a -very annoying thing. To resolve the problem, Quagga provides integrated -user interface shell called @command{vtysh}. @command{vtysh} connects to -each daemon with UNIX domain socket and then works as a proxy for user input. +maintainability. At the same time it also brings many configuration files +and terminal interfaces. Each daemon has it's own configuration file and +terminal interface. When you configure a static route, it must be done in +@command{zebra} configuration file. When you configure BGP network it must +be done in @command{bgpd} configuration file. This can be a very annoying +thing. To resolve the problem, Quagga provides integrated user interface +shell called @command{vtysh}. @command{vtysh} connects to each daemon with +UNIX domain socket and then works as a proxy for user input. Quagga was planned to use multi-threaded mechanism when it runs with a -kernel that supports multi-threads. But at the moment, the thread -library which comes with @sc{gnu}/Linux or FreeBSD has some problems with -running reliable services such as routing software, so we don't use -threads at all. Instead we use the @command{select(2)} system call for -multiplexing the events. - - When @command{zebra} runs under a @sc{gnu} Hurd kernel it will act as a -kernel routing table itself. Under @sc{gnu} Hurd, all TCP/IP services are -provided by user processes called @command{pfinet}. Quagga will provide -all the routing selection mechanisms for the process. This feature will -be implemented when @sc{gnu} Hurd becomes stable. - -@node Supported Platforms, Supported RFC, System Architecture, Overview +kernel that supports multi-threads. But at the moment, the thread library +which comes with @sc{gnu}/Linux or FreeBSD has some problems with running +reliable services such as routing software, so we don't use threads at all. +Instead we use the @command{select(2)} system call for multiplexing the +events. + +@node Supported Platforms @comment node-name, next, previous, up @section Supported Platforms @@ -151,33 +139,28 @@ be implemented when @sc{gnu} Hurd becomes stable. @cindex Compatibility with other systems @cindex Operating systems that support Quagga - Currently Quagga supports @sc{gnu}/Linux, BSD and Solaris. Below is a list -of OS versions on which Quagga runs. Porting Quagga to other platforms is -not so too difficult. Platform dependent codes exist only in -@command{zebra} daemon. Protocol daemons are platform independent. -Please let us know when you find out Quagga runs on a platform which is not -listed below. + Currently Quagga supports @sc{gnu}/Linux, BSD and Solaris. Porting Quagga +to other platforms is not too difficult as platform dependent code should +most be limited to the @command{zebra} daemon. Protocol daemons are mostly +platform independent. Please let us know when you find out Quagga runs on a +platform which is not listed below. + + The list of officially supported platforms are listed below. Note that +Quagga may run correctly on other platforms, and may run with partial +functionality on further platforms. @sp 1 @itemize @bullet @item -GNU/Linux 2.0.37 -@item -GNU/Linux 2.2.x and higher -@item -FreeBSD 2.2.8 -@item -FreeBSD 3.x +@sc{gnu}/Linux 2.2.x and higher @item -FreeBSD 4.x +FreeBSD 4.x and higher @item -NetBSD 1.4 +NetBSD 1.6 and higher @item -OpenBSD 2.5 +OpenBSD 2.5 and higher @item -Solaris 2.6 -@item -Solaris 7 +Solaris 2.6 and higher (IPv6 support requires a patch at moment) @end itemize @sp 1 @@ -194,7 +177,7 @@ KAME IPv6 stack for BSD. INRIA IPv6 stack for BSD. @end itemize -@node Supported RFC, How to get Quagga, Supported Platforms, Overview +@node Supported RFC @comment node-name, next, previous, up @section Supported RFC @@ -269,33 +252,31 @@ November 1995.} @end table -@node How to get Quagga, Mailing List, Supported RFC, Overview +@node How to get Quagga @comment node-name, next, previous, up @section How to get Quagga - Quagga is still beta software and there is no officially released -version. Once Quagga is released you can get it from @sc{gnu} FTP -site and its mirror sites. We are planning Quagga-1.0 as the first -released version. +Quagga is still beta software and there is no officially released +version. - Zebra's official web page is located at: +Zebra's official web page is located at: -@url{http://www.gnu.org/software/zebra/zebra.html}. +@uref{http://www.gnu.org/software/zebra/zebra.html}. - The original Zebra web site is located at: +The original Zebra web site is located at: -@url{http://www.zebra.org/}. +@uref{http://www.zebra.org/}. - As of this writing, development by zebra.org on Zebra has slowed down. -Some work is being done by third-parties to try maintain bug-fixes and +As of this writing, development by zebra.org on Zebra has slowed down. Some +work is being done by third-parties to try maintain bug-fixes and enhancements to the current Zebra code-base, which has resulted in a fork of Zebra called Quagga, see: -@url{http://www.quagga.net/}. +@uref{http://www.quagga.net/} for further information, as well as links to additional zebra resources. -@node Mailing List, Bug Reports, How to get Quagga, Overview +@node Mailing List @comment node-name, next, previous, up @section Mailing List @cindex How to get in touch with Quagga @@ -303,32 +284,17 @@ for further information, as well as links to additional zebra resources. @cindex Contact information @cindex Mailing lists - There is a mailing list for discussions about Quagga. If you have any -comments or suggestions to Quagga, please subscribe to -@url{http://lists.quagga.net/mailman/listinfo/quagga-users}. - - There is an additional mailing list, @email{znog@@dishone.st,ZNOG} for -general discussion of zebra related issues and network operation. To -subscribe send an email to @email{znog-subscribe@@dishone.st} with a message -body that includes only: - -@quotation -subscribe znog -@end quotation +There is a mailing list for discussions about Quagga. If you have any +comments or suggestions to Quagga, please subscribe to: - To unsubscribe, send an email to @email{znog-unsubscribe@@dishone.st} -with a message body that includes only: +@uref{http://lists.quagga.net/mailman/listinfo/quagga-users}. -@quotation -unsubscribe znog -@end quotation +The @uref{http://www.quagga.net/,,Quagga} site has further information on +the available mailing lists, see: - Alternatively, you may use the web interface located at -@url{http://www.dishone.st/mailman/listinfo/znog}. Links to archives of the -znog list are available at this URL. + @uref{http://www.quagga.net/lists.php} -@node Bug Reports, , Mailing List, Overview -@comment node-name, next, previous, up +@node Bug Reports @section Bug Reports @cindex Bug Reports @@ -339,7 +305,7 @@ znog list are available at this URL. @cindex Errors in the software If you think you have found a bug, please send a bug report to -@url{http://bugzilla.quagga.net}. When you send a bug report, please be +@uref{http://bugzilla.quagga.net}. When you send a bug report, please be careful about the points below. @itemize @bullet @@ -357,5 +323,4 @@ arguments to the configure script please note that too. Bug reports are very important for us to improve the quality of Quagga. Quagga is still in the development stage, but please don't hesitate to -send a bug report to @url{http://bugzilla.quagga.net}. - +send a bug report to @uref{http://bugzilla.quagga.net}. diff --git a/doc/protocol.texi b/doc/protocol.texi index 7cae9c9d..23476651 100644 --- a/doc/protocol.texi +++ b/doc/protocol.texi @@ -1,5 +1,4 @@ -@node Zebra Protocol, Packet Binary Dump Format, SNMP Support, Top -@comment node-name, next, previous, up +@node Zebra Protocol @appendix Zebra Protocol Zebra Protocol is a protocol which is used between protocol daemon and diff --git a/doc/quagga.texi b/doc/quagga.texi index 487ac942..18d52d5f 100644 --- a/doc/quagga.texi +++ b/doc/quagga.texi @@ -1,21 +1,18 @@ \input texinfo @c -*- texinfo -*- @c %**start of header @setchapternewpage odd -@settitle Quagga +@settitle @uref{http://www.quagga.net,,Quagga} @setfilename quagga.info @defcodeindex op @synindex pg cp @c %**end of header -@c Set variables -@set EDITION 0.1 -@set VERSION 0.96 -@set UPDATED 12 August 2003 -@set UPDATED-MONTH August 2003 +@c Set variables - sourced from defines.texi +@include defines.texi -@c These may vary with installation environment. -@set INSTALL_PREFIX_ETC /usr/local/etc -@set INSTALL_PREFIX_SBIN /usr/local/sbin +@c automake will automatically generate version.texi +@c and set EDITION, VERSION, UPDATED and UPDATED-MONTH +@include version.texi @c Info entry @dircategory Routing Software: @@ -30,9 +27,10 @@ This file documents the @sc{gnu} Quagga software which manages common TCP/IP routing protocols. This is Edition @value{EDITION}, last updated @value{UPDATED} of -@cite{The Quagga Manual}, for Quagga Version @value{VERSION}. +@cite{The Quagga Manual}, for @uref{http://www.quagga.net/,,Quagga} +Version @value{VERSION}. -Copyright (C) 1999-2004 Kunihiro Ishiguro, et al. +@value{COPYRIGHT_STR} Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -57,15 +55,15 @@ approved by Kunihiro Ishiguro. @end ifinfo @titlepage -@title Quagga +@title @uref{http://www.quagga.net,,Quagga} @subtitle A routing software package for TCP/IP networks -@subtitle Quagga version @value{VERSION} +@subtitle @uref{http://www.quagga.net,,Quagga} version @value{VERSION} @subtitle @value{UPDATED-MONTH} -@author Kunihiro Ishiguro, et al +@author @value{AUTHORS} @page @vskip 0pt plus 1filll -Copyright @copyright{} 1999-2004 Kunihiro Ishiguro, et al. +@value{COPYRIGHT_STR} Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice @@ -84,13 +82,13 @@ by Kunihiro Ishiguro. @page @ifnottex -@node Top, Overview, (dir), (dir) -@comment node-name, next, previous, up +@node Top @top Quagga -Quagga is a advanced routing software package that provides TCP/IP -based routing protocols. This is the Quagga Manual for -quagga-@value{VERSION}. Quagga is a fork of GNU Zebra. +@uref{http://www.quagga.net,,Quagga} is an advanced routing software package +that provides a suite of TCP/IP based routing protocols. This is the Manual +for quagga-@value{VERSION}. @uref{http://www.quagga.net,,Quagga} is a fork of +@uref{http://www.zebra.org,,GNU Zebra}. @end ifnottex @menu @@ -114,7 +112,6 @@ quagga-@value{VERSION}. Quagga is a fork of GNU Zebra. * Command Index:: * VTY Key Index:: @end menu -@summarycontents @contents @include overview.texi @@ -135,14 +132,12 @@ quagga-@value{VERSION}. Quagga is a fork of GNU Zebra. @include protocol.texi @include appendix.texi -@node Command Index, VTY Key Index, Top, Top -@comment node-name, next, previous, up +@node Command Index @unnumbered Command Index @printindex fn -@node VTY Key Index, , Command Index, Top -@comment node-name, next, previous, up +@node VTY Key Index @unnumbered VTY Key Index @printindex ky diff --git a/doc/ripd.texi b/doc/ripd.texi index 31c21f79..8874bc43 100644 --- a/doc/ripd.texi +++ b/doc/ripd.texi @@ -1,7 +1,7 @@ @c -*-texinfo-*- @c This is part of the Quagga Manual. -@c Copyright (C) 1999, 2000 Kunihiro Ishiguro -@c See file zebra.texi for copying conditions. +@c @value{COPYRIGHT_STR} +@c See file quagga.texi for copying conditions. @node RIP @comment node-name, next, previous, up @chapter RIP @@ -32,8 +32,7 @@ version 1 as described in RFC1058. * RIP Debug Commands:: @end menu -@node Starting and Stopping ripd, RIP Configuration, RIP, RIP -@comment node-name, next, previous, up +@node Starting and Stopping ripd @section Starting and Stopping ripd The default configuration file name of @command{ripd}'s is @@ -85,8 +84,7 @@ When the program terminates, retain routes added by @command{ripd}. * RIP netmask:: @end menu -@node RIP netmask, , Starting and Stopping ripd, Starting and Stopping ripd -@comment node-name, next, previous, up +@node RIP netmask @subsection RIP netmask The netmask features of @command{ripd} support both version 1 and version 2 of @@ -107,8 +105,7 @@ old information will be suppressed. Ripd does not currently support equal cost multipath routing. -@node RIP Configuration, How to Announce RIP route, Starting and Stopping ripd, RIP -@comment node-name, next, previous, up +@node RIP Configuration @section RIP Configuration @deffn Command {router rip} {} @@ -220,8 +217,7 @@ split-horizon}. If you don't perform split-horizon on the interface, please specify @code{no ip split-horizon}. @end deffn -@node How to Announce RIP route, Filtering RIP Routes, RIP Configuration, RIP -@comment node-name, next, previous, up +@node How to Announce RIP route @section How to Announce RIP route @deffn {RIP command} {redistribute kernel} {} @@ -284,9 +280,7 @@ most cases, we recommend creating a static route in Quagga and redistributing it in RIP using @code{redistribute static}. @end deffn - -@node Filtering RIP Routes, RIP Metric Manipulation, How to Announce RIP route, RIP -@comment node-name, next, previous, up +@node Filtering RIP Routes @section Filtering RIP Routes RIP routes can be filtered by a distribute-list. @@ -326,8 +320,7 @@ name. Next is the direction of @samp{in} or @samp{out}. If @var{direct} is @samp{in} the access list is applied to input packets. @end deffn -@node RIP Metric Manipulation, RIP distance, Filtering RIP Routes, RIP -@comment node-name, next, previous, up +@node RIP Metric Manipulation @section RIP Metric Manipulation RIP metric is a value for distance for the network. Usually @@ -348,8 +341,7 @@ affects connected routes. @deffnx {RIP command} {offset-list @var{access-list} (in|out) @var{ifname}} {} @end deffn -@node RIP distance, RIP route-map, RIP Metric Manipulation, RIP -@comment node-name, next, previous, up +@node RIP distance @section RIP distance Distance value is used in zebra daemon. Default RIP distance is 120. @@ -371,8 +363,7 @@ Set default RIP distance to specified value when the route's source IP address matches the specified prefix and the specified access-list. @end deffn -@node RIP route-map, RIP Authentication, RIP distance, RIP -@comment node-name, next, previous, up +@node RIP route-map @section RIP route-map Usage of @command{ripd}'s route-map support. @@ -435,8 +426,7 @@ value range is very large for compatibility with other protocols. For RIP, valid metric values are from 1 to 16. @end deffn -@node RIP Authentication, RIP Timers, RIP route-map, RIP -@comment node-name, next, previous, up +@node RIP Authentication @section RIP Authentication @deffn {Interface command} {ip rip authentication mode md5} {} @@ -472,8 +462,7 @@ interface eth1 ! @end example -@node RIP Timers, Show RIP Information, RIP Authentication, RIP -@comment node-name, next, previous, up +@node RIP Timers @section RIP Timers @deffn {RIP command} {timers basic @var{update} @var{timeout} @var{garbage}} {} @@ -511,8 +500,7 @@ The @code{no timers basic} command will reset the timers to the default settings listed above. @end deffn -@node Show RIP Information, RIP Debug Commands, RIP Timers, RIP -@comment node-name, next, previous, up +@node Show RIP Information @section Show RIP Information To display RIP routes. @@ -555,8 +543,7 @@ Routing Protocol is "rip" @end group @end example -@node RIP Debug Commands, , Show RIP Information, RIP -@comment node-name, next, previous, up +@node RIP Debug Commands @section RIP Debug Commands Debug for RIP protocol. diff --git a/doc/ripngd.texi b/doc/ripngd.texi index b49f0bf3..433f1ab4 100644 --- a/doc/ripngd.texi +++ b/doc/ripngd.texi @@ -1,5 +1,4 @@ -@node RIPng, OSPFv2, RIP, Top -@comment node-name, next, previous, up +@node RIPng @chapter RIPng @command{ripngd} supports the RIPng protocol as described in RFC2080. It's an @@ -12,15 +11,13 @@ IPv6 reincarnation of the RIP protocol. * ripngd Filtering Commands:: @end menu -@node Invoking ripngd, ripngd Configuration, RIPng, RIPng -@comment node-name, next, previous, up +@node Invoking ripngd @section Invoking ripngd There are no @code{ripngd} specific invocation options. Common options can be specified (@pxref{Common Invocation Options}). -@node ripngd Configuration, ripngd Terminal Mode Commands, Invoking ripngd, RIPng -@comment node-name, next, previous, up +@node ripngd Configuration @section ripngd Configuration Currently ripngd supports the following commands: @@ -50,8 +47,7 @@ This command is the default and does not appear in the configuration. With this statement, RIPng routes go to the @command{zebra} daemon. @end deffn -@node ripngd Terminal Mode Commands, ripngd Filtering Commands, ripngd Configuration, RIPng -@comment node-name, next, previous, up +@node ripngd Terminal Mode Commands @section ripngd Terminal Mode Commands @deffn Command {show ip ripng} {} @@ -69,8 +65,7 @@ With this statement, RIPng routes go to the @command{zebra} daemon. @deffn Command {debug ripng zebra} {} @end deffn -@node ripngd Filtering Commands, , ripngd Terminal Mode Commands, RIPng -@comment node-name, next, previous, up +@node ripngd Filtering Commands @section ripngd Filtering Commands @deffn Command {distribute-list @var{access_list} (in|out) @var{ifname}} {} diff --git a/doc/routemap.texi b/doc/routemap.texi index 478f4626..11351a49 100644 --- a/doc/routemap.texi +++ b/doc/routemap.texi @@ -1,5 +1,4 @@ -@node Route Map, IPv6 Support, Filtering, Top -@comment node-name, next, previous, up +@node Route Map @chapter Route Map Route map is a very useful function in zebra. There is a match and set @@ -22,16 +21,14 @@ local-preference value is set to 200. * Route Map Set Command:: @end menu -@node Route Map Command, Route Map Match Command, Route Map, Route Map -@comment node-name, next, previous, up -@subsection Route Map Command +@node Route Map Command +@section Route Map Command @deffn {Command} {route-map @var{route-map-name} permit @var{priority}} {} @end deffn -@node Route Map Match Command, Route Map Set Command, Route Map Command, Route Map -@comment node-name, next, previous, up -@subsection Route Map Match Command +@node Route Map Match Command +@section Route Map Match Command @deffn {Route-map Command} {match ip address @var{access_list}} {} Matches the specified @var{access_list} @@ -53,9 +50,8 @@ Matches the specified @var{metric}. Matches the specified @var{community_list} @end deffn -@node Route Map Set Command, , Route Map Match Command, Route Map -@comment node-name, next, previous, up -@subsection Route Map Set Command +@node Route Map Set Command +@section Route Map Set Command @deffn {Route-map Command} {set ip next-hop @var{ipv4_address}} {} Set the BGP nexthop address. diff --git a/doc/snmp.texi b/doc/snmp.texi index b573b6a7..96f080b2 100644 --- a/doc/snmp.texi +++ b/doc/snmp.texi @@ -1,5 +1,4 @@ -@node SNMP Support, Zebra Protocol, Kernel Interface, Top -@comment node-name, next, previous, up +@node SNMP Support @chapter SNMP Support SNMP (Simple Network Managing Protocol) is a widely implemented feature for @@ -14,23 +13,17 @@ available through it. * MIB and command reference:: @end menu - - -@node Getting and installing an SNMP agent, SMUX configuration, SNMP Support, SNMP Support -@comment node-name, next, previous, up +@node Getting and installing an SNMP agent @section Getting and installing an SNMP agent There are several SNMP agent which support SMUX. We recommend to use the latest version of @code{net-snmp} which was formerly known as @code{ucd-snmp}. -It is free and open software and available at @url{http://www.net-snmp.org/} +It is free and open software and available at @uref{http://www.net-snmp.org/} and as binary package for most Linux distributions. @code{net-snmp} has to be compiled with @code{--with-mib-modules=smux} to be able to accept connections from Quagga. - - -@node SMUX configuration, MIB and command reference, Getting and installing an SNMP agent, SNMP Support -@comment node-name, next, previous, up +@node SMUX configuration @section SMUX configuration To enable SMUX protocol support, Quagga must have been build with the @@ -85,10 +78,7 @@ If that is a problem you should consider to patch snmpd and comment out the troublesome @code{snmp_log()} line in the function @code{netsnmp_agent_check_packet()} in @code{agent/snmp_agent.c}. - - -@node MIB and command reference, ,SMUX configuration, SNMP Support -@comment node-name, next, previous, up +@node MIB and command reference @section MIB and command reference The following OID numbers are used for the interprocess communication of snmpd and diff --git a/doc/texinfo.tex b/doc/texinfo.tex index 332e392f..f2738aa0 100644 --- a/doc/texinfo.tex +++ b/doc/texinfo.tex @@ -3,10 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{1999-02-14.16}% +\def\texinfoversion{2004-02-25.17} % -% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 -% Free Software Foundation, Inc. +% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software +% Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -23,21 +24,17 @@ % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, % Boston, MA 02111-1307, USA. % -% In other words, you are welcome to use, share and improve this program. -% You are forbidden to forbid anyone else to use, share and improve -% what you give them. Help stamp out software-hoarding! -% +% As a special exception, when this file is read by TeX when processing +% a Texinfo source document, you may use the result without +% restriction. (This has been our intent since Texinfo was invented.) +% % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% ftp://ftp.gnu.org/pub/gnu/texinfo.tex -% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) +% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or % ftp://tug.org/tex/texinfo.tex -% ftp://ctan.org/macros/texinfo/texinfo.tex -% (and all CTAN mirrors, finger ctan@ctan.org for a list). -% /home/gd/gnu/doc/texinfo.tex on the GNU machines. -% The texinfo.tex in any given Texinfo distribution could well be out +% (and all CTAN mirrors, see http://www.ctan.org). +% The texinfo.tex in any given distribution could well be out % of date, so if that's what you're using, please check. -% There is a small home page for Texinfo at http://texinfo.org/. % % Send bug reports to bug-texinfo@gnu.org. Please include including a % complete document in each bug report with which we can reproduce the @@ -50,13 +47,17 @@ % texindex foo.?? % tex foo.texi % tex foo.texi -% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps. -% The extra runs of TeX get the cross-reference information correct. +% dvips foo.dvi -o # or whatever; this makes foo.ps. +% The extra TeX runs get the cross-reference information correct. % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. % -% It is possible to adapt texinfo.tex for other languages. You can get -% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/. +% It is possible to adapt texinfo.tex for other languages, to some +% extent. You can get the existing language-specific files from the +% full Texinfo distribution. +% +% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. + \message{Loading texinfo [version \texinfoversion]:} @@ -66,8 +67,14 @@ \everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} -% Save some parts of plain tex whose names we will redefine. +\message{Basics,} +\chardef\other=12 + +% We never want plain's \outer definition of \+ in Texinfo. +% For @tex, we can use \tabalign. +\let\+ = \relax +% Save some plain tex macros whose names we will redefine. \let\ptexb=\b \let\ptexbullet=\bullet \let\ptexc=\c @@ -77,33 +84,45 @@ \let\ptexend=\end \let\ptexequiv=\equiv \let\ptexexclam=\! +\let\ptexfootnote=\footnote +\let\ptexgtr=> +\let\ptexhat=^ \let\ptexi=\i +\let\ptexindent=\indent +\let\ptexnoindent=\noindent +\let\ptexinsert=\insert \let\ptexlbrace=\{ +\let\ptexless=< +\let\ptexplus=+ \let\ptexrbrace=\} +\let\ptexslash=\/ \let\ptexstar=\* \let\ptext=\t -% We never want plain's outer \+ definition in Texinfo. -% For @tex, we can use \tabalign. -\let\+ = \relax - - -\message{Basics,} -\chardef\other=12 - % If this character appears in an error message or help string, it % starts a new line in the output. \newlinechar = `^^J +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{l.\the\inputlineno:\space} +\fi + % Set up fixed words for English if not already set. -\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi +\ifx\putwordin\undefined \gdef\putwordin{in}\fi \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi +\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi -\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi \ifx\putwordof\undefined \gdef\putwordof{of}\fi \ifx\putwordon\undefined \gdef\putwordon{on}\fi \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi @@ -111,8 +130,8 @@ \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi -\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi -\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi % \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi @@ -127,49 +146,119 @@ \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi % -\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi -\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi -\ifx\putwordDefivar\undefined \gdef\putwordDefivar{Instance Variable}\fi -\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi -\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi -\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi -\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi -\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi + +% In some macros, we cannot use the `\? notation---the left quote is +% in some cases the escape char. +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\questChar = `\? +\chardef\semiChar = `\; +\chardef\underChar = `\_ + +\chardef\spaceChar = `\ % +\chardef\spacecat = 10 +\def\spaceisspace{\catcode\spaceChar=\spacecat} % Ignore a token. % \def\gobble#1{} -\hyphenation{ap-pen-dix} -\hyphenation{mini-buf-fer mini-buf-fers} -\hyphenation{eshell} -\hyphenation{white-space} +% The following is used inside several \edef's. +\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} + +% Hyphenation fixes. +\hyphenation{ + Flor-i-da Ghost-script Ghost-view Mac-OS ap-pen-dix bit-map bit-maps + data-base data-bases eshell fall-ing half-way long-est man-u-script + man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm + par-a-digms rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + stand-alone strong-est time-stamp time-stamps which-ever white-space + wide-spread wrap-around +} % Margin to add to right of even pages, to left of odd pages. -\newdimen \bindingoffset -\newdimen \normaloffset +\newdimen\bindingoffset +\newdimen\normaloffset \newdimen\pagewidth \newdimen\pageheight +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, -% since that produces some useless output on the terminal. +% since that produces some useless output on the terminal. We also make +% some effort to order the tracing commands to reduce output in the log +% file; cf. trace.sty in LaTeX. % \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% -\ifx\eTeXversion\undefined -\def\loggingall{\tracingcommands2 \tracingstats2 - \tracingpages1 \tracingoutput1 \tracinglostchars1 - \tracingmacros2 \tracingparagraphs1 \tracingrestores1 - \showboxbreadth\maxdimen\showboxdepth\maxdimen -}% -\else -\def\loggingall{\tracingcommands3 \tracingstats2 - \tracingpages1 \tracingoutput1 \tracinglostchars1 - \tracingmacros2 \tracingparagraphs1 \tracingrestores1 - \tracingscantokens1 \tracingassigns1 \tracingifs1 - \tracinggroups1 \tracingnesting2 - \showboxbreadth\maxdimen\showboxdepth\maxdimen +\def\loggingall{% + \tracingstats2 + \tracingpages1 + \tracinglostchars2 % 2 gives us more in etex + \tracingparagraphs1 + \tracingoutput1 + \tracingmacros2 + \tracingrestores1 + \showboxbreadth\maxdimen \showboxdepth\maxdimen + \ifx\eTeXversion\undefined\else % etex gives us more logging + \tracingscantokens1 + \tracingifs1 + \tracinggroups1 + \tracingnesting2 + \tracingassigns1 + \fi + \tracingcommands3 % 3 gives us more in etex + \errorcontextlines16 }% -\fi + +% add check for \lastpenalty to plain's definitions. If the last thing +% we did was a \nobreak, we don't want to insert more space. +% +\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount + \removelastskip\penalty-50\smallskip\fi\fi} +\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount + \removelastskip\penalty-100\medskip\fi\fi} +\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount + \removelastskip\penalty-200\bigskip\fi\fi} % For @cropmarks command. % Do @cropmarks to get crop marks. @@ -215,6 +304,9 @@ \normalturnoffactive % \ in index entries must not stay \, e.g., if % the page break happens to be in the middle of an example. \shipout\vbox{% + % Do this early so pdf references go to the beginning of the page. + \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi + % \ifcropmarks \vbox to \outervsize\bgroup \hsize = \outerhsize \vskip-\topandbottommargin @@ -261,7 +353,7 @@ \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox - }% end of group with \turnoffactive + }% end of group with \normalturnoffactive \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } @@ -294,143 +386,162 @@ % the input line (except we remove a trailing comment). #1 should be a % macro which expects an ordinary undelimited TeX argument. % -\def\parsearg#1{% - \let\next = #1% +\def\parsearg{\parseargusing{}} +\def\parseargusing#1#2{% + \def\next{#2}% \begingroup \obeylines - \futurelet\temp\parseargx -} - -% If the next token is an obeyed space (from an @example environment or -% the like), remove it and recurse. Otherwise, we're done. -\def\parseargx{% - % \obeyedspace is defined far below, after the definition of \sepspaces. - \ifx\obeyedspace\temp - \expandafter\parseargdiscardspace - \else - \expandafter\parseargline - \fi + \spaceisspace + #1% + \parseargline\empty% Insert the \empty token, see \finishparsearg below. } -% Remove a single space (as the delimiter token to the macro call). -{\obeyspaces % - \gdef\parseargdiscardspace {\futurelet\temp\parseargx}} - {\obeylines % \gdef\parseargline#1^^M{% \endgroup % End of the group started in \parsearg. - % - % First remove any @c comment, then any @comment. - % Result of each macro is put in \toks0. - \argremovec #1\c\relax % - \expandafter\argremovecomment \the\toks0 \comment\relax % - % - % Call the caller's macro, saved as \next in \parsearg. - \expandafter\next\expandafter{\the\toks0}% + \argremovecomment #1\comment\ArgTerm% }% } -% Since all \c{,omment} does is throw away the argument, we can let TeX -% do that for us. The \relax here is matched by the \relax in the call -% in \parseargline; it could be more or less anything, its purpose is -% just to delimit the argument to the \c. -\def\argremovec#1\c#2\relax{\toks0 = {#1}} -\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}} +% First remove any @comment, then any @c comment. +\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} -% \argremovec{,omment} might leave us with trailing spaces, though; e.g., +% Each occurence of `\^^M' or `\^^M' is replaced by a single space. +% +% \argremovec might leave us with trailing space, e.g., % @end itemize @c foo -% will have two active spaces as part of the argument with the -% `itemize'. Here we remove all active spaces from #1, and assign the -% result to \toks0. -% -% This loses if there are any *other* active characters besides spaces -% in the argument -- _ ^ +, for example -- since they get expanded. -% Fortunately, Texinfo does not define any such commands. (If it ever -% does, the catcode of the characters in questionwill have to be changed -% here.) But this means we cannot call \removeactivespaces as part of -% \argremovec{,omment}, since @c uses \parsearg, and thus the argument -% that \parsearg gets might well have any character at all in it. -% -\def\removeactivespaces#1{% - \begingroup - \ignoreactivespaces - \edef\temp{#1}% - \global\toks0 = \expandafter{\temp}% - \endgroup +% This space token undergoes the same procedure and is eventually removed +% by \finishparsearg. +% +\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} +\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} +\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% + \def\temp{#3}% + \ifx\temp\empty + % We cannot use \next here, as it holds the macro to run; + % thus we reuse \temp. + \let\temp\finishparsearg + \else + \let\temp\argcheckspaces + \fi + % Put the space token in: + \temp#1 #3\ArgTerm } -% Change the active space to expand to nothing. +% If a _delimited_ argument is enclosed in braces, they get stripped; so +% to get _exactly_ the rest of the line, we had to prevent such situation. +% We prepended an \empty token at the very beginning and we expand it now, +% just before passing the control to \next. +% (Similarily, we have to think about #3 of \argcheckspacesY above: it is +% either the null string, or it ends with \^^M---thus there is no danger +% that a pair of braces would be stripped. % -\begingroup +% But first, we have to remove the trailing space token. +% +\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}} + +% \parseargdef\foo{...} +% is roughly equivalent to +% \def\foo{\parsearg\Xfoo} +% \def\Xfoo#1{...} +% +% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my +% favourite TeX trick. --kasal, 16nov03 + +\def\parseargdef#1{% + \expandafter \doparseargdef \csname\string#1\endcsname #1% +} +\def\doparseargdef#1#2{% + \def#2{\parsearg#1}% + \def#1##1% +} + +% Several utility definitions with active space: +{ \obeyspaces - \gdef\ignoreactivespaces{\obeyspaces\let =\empty} -\endgroup + \gdef\obeyedspace{ } + + % Make each space character in the input produce a normal interword + % space in the output. Don't allow a line break at this space, as this + % is used only in environments like @example, where each line of input + % should produce a line of output anyway. + % + \gdef\sepspaces{\obeyspaces\let =\tie} + + % If an index command is used in an @example environment, any spaces + % therein should become regular spaces in the raw index file, not the + % expansion of \tie (\leavevmode \penalty \@M \ ). + \gdef\unsepspaces{\let =\space} +} \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} -%% These are used to keep @begin/@end levels from running away -%% Call \inENV within environments (after a \begingroup) -\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} -\def\ENVcheck{% -\ifENV\errmessage{Still within an environment; press RETURN to continue} -\endgroup\fi} % This is not perfect, but it should reduce lossage +% Define the framework for environments in texinfo.tex. It's used like this: +% +% \envdef\foo{...} +% \def\Efoo{...} +% +% It's the responsibility of \envdef to insert \begingroup before the +% actual body; @end closes the group after calling \Efoo. \envdef also +% defines \thisenv, so the current environment is known; @end checks +% whether the environment name matches. The \checkenv macro can also be +% used to check whether the current environment is the one expected. +% +% Non-false conditionals (@iftex, @ifset) don't fit into this, so they +% are not treated as enviroments; they don't open a group. (The +% implementation of @end takes care not to call \endgroup in this +% special case.) -% @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Press RETURN to continue.} -\outer\def\begin{\parsearg\beginxxx} +% At runtime, environments start with this: +\def\startenvironment#1{\begingroup\def\thisenv{#1}} +% initialize +\let\thisenv\empty -\def\beginxxx #1{% -\expandafter\ifx\csname #1\endcsname\relax -{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else -\csname #1\endcsname\fi} +% ... but they get defined via ``\envdef\foo{...}'': +\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} +\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} -% @end foo executes the definition of \Efoo. -% -\def\end{\parsearg\endxxx} -\def\endxxx #1{% - \removeactivespaces{#1}% - \edef\endthing{\the\toks0}% - % - \expandafter\ifx\csname E\endthing\endcsname\relax - \expandafter\ifx\csname \endthing\endcsname\relax - % There's no \foo, i.e., no ``environment'' foo. - \errhelp = \EMsimple - \errmessage{Undefined command `@end \endthing'}% - \else - \unmatchedenderror\endthing - \fi +% Check whether we're in the right environment: +\def\checkenv#1{% + \def\temp{#1}% + \ifx\thisenv\temp \else - % Everything's ok; the right environment has been started. - \csname E\endthing\endcsname + \badenverr \fi } -% There is an environment #1, but it hasn't been started. Give an error. -% -\def\unmatchedenderror#1{% +% Evironment mismatch, #1 expected: +\def\badenverr{% \errhelp = \EMsimple - \errmessage{This `@end #1' doesn't have a matching `@#1'}% + \errmessage{This command can appear only \inenvironment\temp, + not \inenvironment\thisenv}% +} +\def\inenvironment#1{% + \ifx#1\empty + out of any environment% + \else + in environment \expandafter\string#1% + \fi } -% Define the control sequence \E#1 to give an unmatched @end error. +% @end foo executes the definition of \Efoo. +% But first, it executes a specialized version of \checkenv % -\def\defineunmatchedend#1{% - \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}% +\parseargdef\end{% + \if 1\csname iscond.#1\endcsname + \else + % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + \expandafter\checkenv\csname#1\endcsname + \csname E#1\endcsname + \endgroup + \fi } +\newhelp\EMsimple{Press RETURN to continue.} -% Single-spacing is done by various environments (specifically, in -% \nonfillstart and \quotations). -\newskip\singlespaceskip \singlespaceskip = 12.5pt -\def\singlespace{% - % Why was this kern here? It messes up equalizing space above and below - % environments. --karl, 6may93 - %{\advance \baselineskip by -\singlespaceskip - %\kern \baselineskip}% - \setleading \singlespaceskip -} %% Simple single-character @ commands @@ -451,16 +562,22 @@ \let\{=\mylbrace \let\}=\myrbrace \begingroup - % Definitions to produce actual \{ & \} command in an index. - \catcode`\{ = 12 \catcode`\} = 12 + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux file. + \catcode`\{ = \other \catcode`\} = \other \catcode`\[ = 1 \catcode`\] = 2 - \catcode`\@ = 0 \catcode`\\ = 12 - @gdef@lbracecmd[\{]% - @gdef@rbracecmd[\}]% -@endgroup + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent -% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H. +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. \let\, = \c \let\dotaccent = \. \def\ringaccent#1{{\accent23 #1}} @@ -468,10 +585,12 @@ \let\ubaraccent = \b \let\udotaccent = \d -% Other special characters: @questiondown @exclamdown -% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss. +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. \def\questiondown{?`} \def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} % Dotless i and dotless j, used for accents. \def\imacro{i} @@ -484,6 +603,25 @@ \fi\fi } +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=3000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% + \kern-.15em + \TeX +} + % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space % at the beginning of a line will start with \penalty -- and @@ -502,6 +640,9 @@ % @* forces a line break. \def\*{\hfil\break\hbox{}\ignorespaces} +% @/ allows a line break. +\let\/=\allowbreak + % @. is an end-of-sentence period. \def\.{.\spacefactor=3000 } @@ -524,47 +665,24 @@ % therefore, no glue is inserted, and the space between the headline and % the text is small, which looks bad. % -\def\group{\begingroup - \ifnum\catcode13=\active \else +% Another complication is that the group might be very large. This can +% cause the glue on the previous page to be unduly stretched, because it +% does not have much material. In this case, it's better to add an +% explicit \vfill so that the extra space is at the bottom. The +% threshold for doing this is if the group is more than \vfilllimit +% percent of a page (\vfilllimit can be changed inside of @tex). +% +\newbox\groupbox +\def\vfilllimit{0.7} +% +\envdef\group{% + \ifnum\catcode`\^^M=\active \else \errhelp = \groupinvalidhelp \errmessage{@group invalid in context where filling is enabled}% \fi + \startsavinginserts % - % The \vtop we start below produces a box with normal height and large - % depth; thus, TeX puts \baselineskip glue before it, and (when the - % next line of text is done) \lineskip glue after it. (See p.82 of - % the TeXbook.) Thus, space below is not quite equal to space - % above. But it's pretty close. - \def\Egroup{% - \egroup % End the \vtop. - \endgroup % End the \group. - }% - % - \vtop\bgroup - % We have to put a strut on the last line in case the @group is in - % the midst of an example, rather than completely enclosing it. - % Otherwise, the interline space between the last line of the group - % and the first line afterwards is too small. But we can't put the - % strut in \Egroup, since there it would be on a line by itself. - % Hence this just inserts a strut at the beginning of each line. - \everypar = {\strut}% - % - % Since we have a strut on every line, we don't need any of TeX's - % normal interline spacing. - \offinterlineskip - % - % OK, but now we have to do something about blank - % lines in the input in @example-like environments, which normally - % just turn into \lisppar, which will insert no space now that we've - % turned off the interline space. Simplest is to make them be an - % empty paragraph. - \ifx\par\lisppar - \edef\par{\leavevmode \par}% - % - % Reset ^^M's definition to new definition of \par. - \obeylines - \fi - % + \setbox\groupbox = \vtop\bgroup % Do @comment since we are called inside an environment such as % @example, where each end-of-line in the input causes an % end-of-line in the output. We don't want the end-of-line after @@ -574,6 +692,32 @@ \comment } % +% The \vtop produces a box with normal height and large depth; thus, TeX puts +% \baselineskip glue before it, and (when the next line of text is done) +% \lineskip glue after it. Thus, space below is not quite equal to space +% above. But it's pretty close. +\def\Egroup{% + % To get correct interline space between the last line of the group + % and the first line afterwards, we have to propagate \prevdepth. + \endgraf % Not \par, as it may have been set to \lisppar. + \global\dimen1 = \prevdepth + \egroup % End the \vtop. + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \box\groupbox + \prevdepth = \dimen1 + \checkinserts +} +% % TeX puts in an \escapechar (i.e., `@') at the beginning of the help % message, so this ends up printing `@group can only ...'. % @@ -586,10 +730,8 @@ where each line of input produces a line of output.} \newdimen\mil \mil=0.001in -\def\need{\parsearg\needx} - % Old definition--didn't work. -%\def\needx #1{\par % +%\parseargdef\need{\par % %% This method tries to make TeX break the page naturally %% if the depth of the box does not fit. %{\baselineskip=0pt% @@ -597,70 +739,50 @@ where each line of input produces a line of output.} %\prevdepth=-1000pt %}} -\def\needx#1{% - % Go into vertical mode, so we don't make a big box in the middle of a +\parseargdef\need{% + % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. \par % - % Don't add any leading before our big empty box, but allow a page - % break, since the best break might be right here. - \allowbreak - \nointerlineskip - \vtop to #1\mil{\vfil}% - % - % TeX does not even consider page breaks if a penalty added to the - % main vertical list is 10000 or more. But in order to see if the - % empty box we just added fits on the page, we must make it consider - % page breaks. On the other hand, we don't want to actually break the - % page after the empty box. So we use a penalty of 9999. - % - % There is an extremely small chance that TeX will actually break the - % page at this \penalty, if there are no other feasible breakpoints in - % sight. (If the user is using lots of big @group commands, which - % almost-but-not-quite fill up a page, TeX will have a hard time doing - % good page breaking, for example.) However, I could not construct an - % example where a page broke at this \penalty; if it happens in a real - % document, then we can reconsider our strategy. - \penalty9999 - % - % Back up by the size of the box, whether we did a page break or not. - \kern -#1\mil - % - % Do not allow a page break right after this kern. - \nobreak + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi } -% @br forces paragraph break +% @br forces paragraph break (and is undocumented). \let\br = \par -% @dots{} output an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. -% -\def\dots{% - \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil minus 0.25fil - .\hss.\hss.% - \hskip 0pt plus 0.5fil minus 0.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \leavevmode - \hbox to 2em{% - \hskip 0pt plus 0.25fil minus 0.25fil - .\hss.\hss.\hss.% - \hskip 0pt plus 0.5fil minus 0.5fil - }% - \spacefactor=3000 -} - - -% @page forces the start of a new page +% @page forces the start of a new page. % \def\page{\par\vfill\supereject} @@ -672,57 +794,127 @@ where each line of input produces a line of output.} \newskip\exdentamount % This defn is used inside fill environments such as @defun. -\def\exdent{\parsearg\exdentyyy} -\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}} +\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} % This defn is used inside nofill environments such as @example. -\def\nofillexdent{\parsearg\nofillexdentyyy} -\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount -\leftline{\hskip\leftskip{\rm#1}}}} - -% @inmargin{TEXT} puts TEXT in the margin next to the current paragraph. +\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount + \leftline{\hskip\leftskip{\rm#1}}}} -\def\inmargin#1{% -\strut\vadjust{\nobreak\kern-\strutdepth - \vtop to \strutdepth{\baselineskip\strutdepth\vss - \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}} +% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current +% paragraph. For more general purposes, use the \margin insertion +% class. WHICH is `l' or `r'. +% \newskip\inmarginspacing \inmarginspacing=1cm \def\strutdepth{\dp\strutbox} - -%\hbox{{\rm#1}}\hfil\break}} +% +\def\doinmargin#1#2{\strut\vadjust{% + \nobreak + \kern-\strutdepth + \vtop to \strutdepth{% + \baselineskip=\strutdepth + \vss + % if you have multiple lines of stuff to put here, you'll need to + % make the vbox yourself of the appropriate size. + \ifx#1l% + \llap{\ignorespaces #2\hskip\inmarginspacing}% + \else + \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% + \fi + \null + }% +}} +\def\inleftmargin{\doinmargin l} +\def\inrightmargin{\doinmargin r} +% +% @inmargin{TEXT [, RIGHT-TEXT]} +% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; +% else use TEXT for both). +% +\def\inmargin#1{\parseinmargin #1,,\finish} +\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \def\lefttext{#1}% have both texts + \def\righttext{#2}% + \else + \def\lefttext{#1}% have only one text + \def\righttext{#1}% + \fi + % + \ifodd\pageno + \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin + \else + \def\temp{\inleftmargin\lefttext}% + \fi + \temp +} % @include file insert text of that file as input. -% Allow normal characters that we make active in the argument (a file name). -\def\include{\begingroup - \catcode`\\=12 - \catcode`~=12 - \catcode`^=12 - \catcode`_=12 - \catcode`|=12 - \catcode`<=12 - \catcode`>=12 - \catcode`+=12 - \parsearg\includezzz} -% Restore active chars for included file. -\def\includezzz#1{\endgroup\begingroup - % Read the included file in a group so nested @include's work. +% +\def\include{\parseargusing\filenamecatcodes\includezzz} +\def\includezzz#1{% + \pushthisfilestack \def\thisfile{#1}% - \input\thisfile -\endgroup} + {% + \makevalueexpandable + \def\temp{\input #1 }% + \expandafter + }\temp + \popthisfilestack +} +\def\filenamecatcodes{% + \catcode`\\=\other + \catcode`~=\other + \catcode`^=\other + \catcode`_=\other + \catcode`|=\other + \catcode`<=\other + \catcode`>=\other + \catcode`+=\other + \catcode`-=\other +} -\def\thisfile{} +\def\pushthisfilestack{% + \expandafter\pushthisfilestackX\popthisfilestack\StackTerm +} +\def\pushthisfilestackX{% + \expandafter\pushthisfilestackY\thisfile\StackTerm +} +\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% + \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% +} -% @center line outputs that line, centered +\def\popthisfilestack{\errthisfilestackempty} +\def\errthisfilestackempty{\errmessage{Internal error: + the stack of filenames is empty.}} -\def\center{\parsearg\centerzzz} -\def\centerzzz #1{{\advance\hsize by -\leftskip -\advance\hsize by -\rightskip -\centerline{#1}}} +\def\thisfile{} + +% @center line +% outputs that line, centered. +% +\parseargdef\center{% + \ifhmode + \let\next\centerH + \else + \let\next\centerV + \fi + \next{\hfil \ignorespaces#1\unskip \hfil}% +} +\def\centerH#1{% + {% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break + }% +} +\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} % @sp n outputs n lines of vertical space -\def\sp{\parsearg\spxxx} -\def\spxxx #1{\vskip #1\baselineskip} +\parseargdef\sp{\vskip #1\baselineskip} % @comment ...line which is ignored... % @c is the same as @comment @@ -737,13 +929,13 @@ where each line of input produces a line of output.} % @paragraphindent NCHARS % We'll use ems for NCHARS, close enough. -% We cannot implement @paragraphindent asis, though. -% +% NCHARS can also be the word `asis' or `none'. +% We cannot feasibly implement @paragraphindent asis, though. +% \def\asisword{asis} % no translation, these are keywords \def\noneword{none} % -\def\paragraphindent{\parsearg\doparagraphindent} -\def\doparagraphindent#1{% +\parseargdef\paragraphindent{% \def\temp{#1}% \ifx\temp\asisword \else @@ -756,62 +948,190 @@ where each line of input produces a line of output.} \parindent = \defaultparindent } -% @asis just yields its argument. Used with @table, for example. +% @exampleindent NCHARS +% We'll use ems for NCHARS like @paragraphindent. +% It seems @exampleindent asis isn't necessary, but +% I preserve it to make it similar to @paragraphindent. +\parseargdef\exampleindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \lispnarrowing = 0pt + \else + \lispnarrowing = #1em + \fi + \fi +} + +% @firstparagraphindent WORD +% If WORD is `none', then suppress indentation of the first paragraph +% after a section heading. If WORD is `insert', then do indent at such +% paragraphs. % -\def\asis#1{#1} +% The paragraph indentation is suppressed or not by calling +% \suppressfirstparagraphindent, which the sectioning commands do. +% We switch the definition of this back and forth according to WORD. +% By default, we suppress indentation. +% +\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} +\def\insertword{insert} +% +\parseargdef\firstparagraphindent{% + \def\temp{#1}% + \ifx\temp\noneword + \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent + \else\ifx\temp\insertword + \let\suppressfirstparagraphindent = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @firstparagraphindent option `\temp'}% + \fi\fi +} -% @math means output in math mode. -% We don't use $'s directly in the definition of \math because control -% sequences like \math are expanded when the toc file is written. Then, -% we read the toc file back, the $'s will be normal characters (as they -% should be, according to the definition of Texinfo). So we must use a -% control sequence to switch into and out of math mode. +% Here is how we actually suppress indentation. Redefine \everypar to +% \kern backwards by \parindent, and then reset itself to empty. % -% This isn't quite enough for @math to work properly in indices, but it -% seems unlikely it will ever be needed there. +% We also make \indent itself not actually do anything until the next +% paragraph. % -\let\implicitmath = $ -\def\math#1{\implicitmath #1\implicitmath} +\gdef\dosuppressfirstparagraphindent{% + \gdef\indent{% + \restorefirstparagraphindent + \indent + }% + \gdef\noindent{% + \restorefirstparagraphindent + \noindent + }% + \global\everypar = {% + \kern -\parindent + \restorefirstparagraphindent + }% +} -% @bullet and @minus need the same treatment as @math, just above. -\def\bullet{\implicitmath\ptexbullet\implicitmath} -\def\minus{\implicitmath-\implicitmath} +\gdef\restorefirstparagraphindent{% + \global \let \indent = \ptexindent + \global \let \noindent = \ptexnoindent + \global \everypar = {}% +} -% @refill is a no-op. -\let\refill=\relax -% If working on a large document in chapters, it is convenient to -% be able to disable indexing, cross-referencing, and contents, for test runs. -% This is done with @novalidate (before @setfilename). +% @asis just yields its argument. Used with @table, for example. % -\newif\iflinks \linkstrue % by default we want the aux files. -\let\novalidate = \linksfalse +\def\asis#1{#1} -% @setfilename is done at the beginning of every texinfo file. -% So open here the files we need to have open while reading the input. -% This makes it possible to make a .fmt file for texinfo. -\def\setfilename{% - \iflinks - \readauxfile - \fi % \openindices needs to do some work in any case. - \openindices - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \global\let\setfilename=\comment % Ignore extra @setfilename cmds. - % - % If texinfo.cnf is present on the system, read it. - % Useful for site-wide @afourpaper, etc. - % Just to be on the safe side, close the input stream before the \input. - \openin 1 texinfo.cnf - \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi - \closein1 - \temp - % - \comment % Ignore the actual filename. +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode\underChar = \active + \gdef\mathunderscore{% + \catcode\underChar=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } } - -% Called from \setfilename. +% Another complication: we want \\ (and @\) to output a \ character. +% FYI, plain.tex uses \\ as a temporary control sequence (why?), but +% this is not advertised and we don't care. Texinfo does not +% otherwise define @\. % -\def\openindices{% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + } +} + +% @bullet and @minus need the same treatment as @math, just above. +\def\bullet{$\ptexbullet$} +\def\minus{$-$} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in a typewriter +% font as three actual period characters. +% +\def\dots{% + \leavevmode + \hbox to 1.5em{% + \hskip 0pt plus 0.25fil + .\hfil.\hfil.% + \hskip 0pt plus 0.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=3000 +} + +% @comma{} is so commas can be inserted into text without messing up +% Texinfo's parsing. +% +\let\comma = , + +% @refill is a no-op. +\let\refill=\relax + +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate (before @setfilename). +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \iflinks + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux + \fi % \openindices needs to do some work in any case. + \openindices + \let\setfilename=\comment % Ignore extra @setfilename cmds. + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. + \openin 1 texinfo.cnf + \ifeof 1 \else \input texinfo.cnf \fi + \closein 1 + % + \comment % Ignore the actual filename. +} + +% Called from \setfilename. +% +\def\openindices{% \newindex{cp}% \newcodeindex{fn}% \newcodeindex{vr}% @@ -824,21 +1144,287 @@ where each line of input produces a line of output.} \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} +\message{pdf,} +% adobe `portable' document format +\newcount\tempnum +\newcount\lnkcount +\newtoks\filename +\newcount\filenamelength +\newcount\pgn +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +\ifx\pdfoutput\undefined + \pdffalse + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\linkcolor = \relax + \let\pdfmakeoutlines = \relax +\else + \pdftrue + \pdfoutput = 1 + \input pdfcolor + \pdfcatalog{/PageMode /UseOutlines}% + \def\dopdfimage#1#2#3{% + \def\imagewidth{#2}% + \def\imageheight{#3}% + % without \immediate, pdftex seg faults when the same image is + % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) + \ifnum\pdftexversion < 14 + \immediate\pdfimage + \else + \immediate\pdfximage + \fi + \ifx\empty\imagewidth\else width \imagewidth \fi + \ifx\empty\imageheight\else height \imageheight \fi + \ifnum\pdftexversion<13 + #1.pdf% + \else + {#1.pdf}% + \fi + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + \def\pdfmkdest#1{{% + % We have to set dummies so commands such as @code in a section title + % aren't expanded. + \atdummies + \normalturnoffactive + \pdfdest name{#1} xyz% + }} + \def\pdfmkpgn#1{#1} + \let\linkcolor = \Blue % was Cyan, but that seems light? + \def\endlink{\Black\pdfendlink} + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by 1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + % + % #1 is the section text. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node + % text, which might be empty if this toc entry had no + % corresponding node. #4 is the page number. + % + \def\dopdfoutline#1#2#3#4{% + % Generate a link to the node text if that exists; else, use the + % page number. We could generate a destination for the section + % text in the case where a section has no node, but it doesn't + % seem worthwhile, since most documents are normally structured. + \def\pdfoutlinedest{#3}% + \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi + % + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}% + } + % + \def\pdfmakeoutlines{% + \begingroup + % Thanh's hack / proper braces in bookmarks + \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace + \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace + % + % Read toc silently, to get counts of subentries for \pdfoutline. + \def\numchapentry##1##2##3##4{% + \def\thischapnum{##2}% + \let\thissecnum\empty + \let\thissubsecnum\empty + }% + \def\numsecentry##1##2##3##4{% + \advancenumber{chap\thischapnum}% + \def\thissecnum{##2}% + \let\thissubsecnum\empty + }% + \def\numsubsecentry##1##2##3##4{% + \advancenumber{sec\thissecnum}% + \def\thissubsecnum{##2}% + }% + \def\numsubsubsecentry##1##2##3##4{% + \advancenumber{subsec\thissubsecnum}% + }% + \let\thischapnum\empty + \let\thissecnum\empty + \let\thissubsecnum\empty + % + % use \def rather than \let here because we redefine \chapentry et + % al. a second time, below. + \def\appentry{\numchapentry}% + \def\appsecentry{\numsecentry}% + \def\appsubsecentry{\numsubsecentry}% + \def\appsubsubsecentry{\numsubsubsecentry}% + \def\unnchapentry{\numchapentry}% + \def\unnsecentry{\numsecentry}% + \def\unnsubsecentry{\numsubsecentry}% + \def\unnsubsubsecentry{\numsubsubsecentry}% + \input \jobname.toc + % + % Read toc second time, this time actually producing the outlines. + % The `-' means take the \expnumber as the absolute number of + % subentries, which we calculated on our first read of the .toc above. + % + % We use the node names as the destinations. + \def\numchapentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\numsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% + \def\numsubsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% + \def\numsubsubsecentry##1##2##3##4{% count is always zero + \dopdfoutline{##1}{}{##3}{##4}}% + % + % PDF outlines are displayed using system fonts, instead of + % document fonts. Therefore we cannot use special characters, + % since the encoding is unknown. For example, the eogonek from + % Latin 2 (0xea) gets translated to a | character. Info from + % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. + % + % xx to do this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Right + % now, I guess we'll just let the pdf reader have its way. + \indexnofonts + \turnoffactive + \input \jobname.toc + \endgroup + } + % + \def\makelinks #1,{% + \def\params{#1}\def\E{END}% + \ifx\params\E + \let\nextmakelinks=\relax + \else + \let\nextmakelinks=\makelinks + \ifnum\lnkcount>0,\fi + \picknum{#1}% + \startlink attr{/Border [0 0 0]} + goto name{\pdfmkpgn{\the\pgn}}% + \linkcolor #1% + \advance\lnkcount by 1% + \endlink + \fi + \nextmakelinks + } + \def\picknum#1{\expandafter\pn#1} + \def\pn#1{% + \def\p{#1}% + \ifx\p\lbrace + \let\nextpn=\ppn + \else + \let\nextpn=\ppnn + \def\first{#1} + \fi + \nextpn + } + \def\ppn#1{\pgn=#1\gobble} + \def\ppnn{\pgn=\first} + \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \ifx\p\space\else\addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \fi + \nextsp} + \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink + \fi + \def\pdfurl#1{% + \begingroup + \normalturnoffactive\def\@{@}% + \makevalueexpandable + \leavevmode\Red + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS|\relax + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} + \linkcolor #1\endlink} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\fi % \ifx\pdfoutput + + \message{fonts,} -% Font-change commands. + +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname ten#1\endcsname % change the current font +} + +% Select #1 fonts with the current style. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}} +\def\tt{\fam=\ttfam \setfontstyle{tt}} % Texinfo sort of supports the sans serif font style, which plain TeX does not. -% So we set up a \sf analogous to plain's \rm, etc. +% So we set up a \sf. \newfam\sffam -\def\sf{\fam=\sffam \tensf} +\def\sf{\fam=\sffam \setfontstyle{sf}} \let\li = \sf % Sometimes we call it \li, not \sf. -% We don't need math for this one. -\def\ttsl{\tenttsl} +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} -% Use Computer Modern fonts at \magstephalf (11pt). -\newcount\mainmagstep -\mainmagstep=\magstephalf +% Default leading. +\newdimen\textleading \textleading = 13.2pt + +% Set the baselineskip to #1, and the lineskip and strut size +% correspondingly. There is no deep meaning behind these magic numbers +% used as factors; they just match (closely enough) what Knuth defined. +% +\def\lineskipfactor{.08333} +\def\strutheightpercent{.70833} +\def\strutdepthpercent {.29167} +% +\def\setleading#1{% + \normalbaselineskip = #1\relax + \normallineskip = \lineskipfactor\normalbaselineskip + \normalbaselines + \setbox\strutbox =\hbox{% + \vrule width0pt height\strutheightpercent\baselineskip + depth \strutdepthpercent \baselineskip + }% +} % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). @@ -868,17 +1454,18 @@ where each line of input produces a line of output.} \def\scshape{csc} \def\scbshape{csc} +% Text fonts (11.2pt, magstep1). +\newcount\mainmagstep \ifx\bigger\relax -\let\mainmagstep=\magstep1 -\setfont\textrm\rmshape{12}{1000} -\setfont\texttt\ttshape{12}{1000} + % not really supported. + \mainmagstep=\magstep1 + \setfont\textrm\rmshape{12}{1000} + \setfont\texttt\ttshape{12}{1000} \else -\setfont\textrm\rmshape{10}{\mainmagstep} -\setfont\texttt\ttshape{10}{\mainmagstep} + \mainmagstep=\magstephalf + \setfont\textrm\rmshape{10}{\mainmagstep} + \setfont\texttt\ttshape{10}{\mainmagstep} \fi -% Instead of cmb10, you many want to use cmbx10. -% cmbx10 is a prettier font on its own, but cmb10 -% looks better when embedded in a line with cmr10. \setfont\textbf\bfshape{10}{\mainmagstep} \setfont\textit\itshape{10}{\mainmagstep} \setfont\textsl\slshape{10}{\mainmagstep} @@ -888,30 +1475,37 @@ where each line of input produces a line of output.} \font\texti=cmmi10 scaled \mainmagstep \font\textsy=cmsy10 scaled \mainmagstep -% A few fonts for @defun, etc. -\setfont\defbf\bxshape{10}{\magstep1} %was 1314 +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstep1} \setfont\deftt\ttshape{10}{\magstep1} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} - -% Fonts for indices and small examples (9pt). -% We actually use the slanted font rather than the italic, -% because texinfo normally uses the slanted fonts for that. -% Do not make many font distinctions in general in the index, since they -% aren't very useful. -\setfont\ninett\ttshape{9}{1000} -\setfont\ninettsl\ttslshape{10}{900} -\setfont\indrm\rmshape{9}{1000} -\setfont\indit\itshape{9}{1000} -\setfont\indsl\slshape{9}{1000} -\let\indtt=\ninett -\let\indttsl=\ninettsl -\let\indsf=\indrm -\let\indbf=\indrm -\setfont\indsc\scshape{10}{900} -\font\indi=cmmi9 -\font\indsy=cmsy9 - -% Fonts for title page: +\setfont\defttsl\ttslshape{10}{\magstep1} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\setfont\smallrm\rmshape{9}{1000} +\setfont\smalltt\ttshape{9}{1000} +\setfont\smallbf\bfshape{10}{900} +\setfont\smallit\itshape{9}{1000} +\setfont\smallsl\slshape{9}{1000} +\setfont\smallsf\sfshape{9}{1000} +\setfont\smallsc\scshape{10}{900} +\setfont\smallttsl\ttslshape{10}{900} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 + +% Fonts for small examples (8pt). +\setfont\smallerrm\rmshape{8}{1000} +\setfont\smallertt\ttshape{8}{1000} +\setfont\smallerbf\bfshape{10}{800} +\setfont\smallerit\itshape{8}{1000} +\setfont\smallersl\slshape{8}{1000} +\setfont\smallersf\sfshape{8}{1000} +\setfont\smallersc\scshape{10}{800} +\setfont\smallerttsl\ttslshape{10}{800} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 + +% Fonts for title page (20.4pt): \setfont\titlerm\rmbshape{12}{\magstep3} \setfont\titleit\itbshape{10}{\magstep4} \setfont\titlesl\slbshape{10}{\magstep4} @@ -923,6 +1517,7 @@ where each line of input produces a line of output.} \font\titlei=cmmi12 scaled \magstep3 \font\titlesy=cmsy10 scaled \magstep4 \def\authorrm{\secrm} +\def\authortt{\sectt} % Chapter (and unnumbered) fonts (17.28pt). \setfont\chaprm\rmbshape{12}{\magstep2} @@ -948,20 +1543,6 @@ where each line of input produces a line of output.} \font\seci=cmmi12 scaled \magstep1 \font\secsy=cmsy10 scaled \magstep2 -% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad. -% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded. -% \setfont\ssecsl\slshape{10}{\magstep1} -% \setfont\ssectt\ttshape{10}{\magstep1} -% \setfont\ssecsf\sfshape{10}{\magstep1} - -%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx. -%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than -%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1. -%\setfont\ssectt\ttshape{10}{1315} -%\setfont\ssecsf\sfshape{10}{1315} - -%\let\ssecbf=\ssecrm - % Subsection fonts (13.15pt). \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} @@ -970,68 +1551,124 @@ where each line of input produces a line of output.} \setfont\ssecttsl\ttslshape{10}{1315} \setfont\ssecsf\sfbshape{12}{\magstephalf} \let\ssecbf\ssecrm -\setfont\ssecsc\scbshape{10}{\magstep1} +\setfont\ssecsc\scbshape{10}{1315} \font\sseci=cmmi12 scaled \magstephalf \font\ssecsy=cmsy10 scaled 1315 -% The smallcaps and symbol fonts should actually be scaled \magstep1.5, -% but that is not a standard magnification. + +% Reduced fonts for @acro in text (10pt). +\setfont\reducedrm\rmshape{10}{1000} +\setfont\reducedtt\ttshape{10}{1000} +\setfont\reducedbf\bfshape{10}{1000} +\setfont\reducedit\itshape{10}{1000} +\setfont\reducedsl\slshape{10}{1000} +\setfont\reducedsf\sfshape{10}{1000} +\setfont\reducedsc\scshape{10}{1000} +\setfont\reducedttsl\ttslshape{10}{1000} +\font\reducedi=cmmi10 +\font\reducedsy=cmsy10 % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since -% texinfo doesn't allow for producing subscripts and superscripts, we -% don't bother to reset \scriptfont and \scriptscriptfont (which would -% also require loading a lot more fonts). +% texinfo doesn't allow for producing subscripts and superscripts except +% in the main text, we don't bother to reset \scriptfont and +% \scriptscriptfont (which would also require loading a lot more fonts). % \def\resetmathfonts{% - \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy - \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf - \textfont\ttfam = \tentt \textfont\sffam = \tensf + \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy + \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf + \textfont\ttfam=\tentt \textfont\sffam=\tensf } - % The font-changing commands redefine the meanings of \tenSTYLE, instead -% of just \STYLE. We do this so that font changes will continue to work -% in math mode, where it is the current \fam that is relevant in most -% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam -% \tenbf}, for example. By redefining \tenbf, we obviate the need to -% redefine \bf itself. +% of just \STYLE. We do this because \STYLE needs to also set the +% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire +% \tenSTYLE to set the current font. +% +% Each font-changing command also sets the names \lsize (one size lower) +% and \lllsize (three sizes lower). These relative commands are used in +% the LaTeX logo and acronyms. +% +% This all needs generalizing, badly. +% \def\textfonts{% \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl - \resetmathfonts} + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \let\tenttsl=\textttsl + \def\lsize{reduced}\def\lllsize{smaller}% + \resetmathfonts \setleading{\textleading}} \def\titlefonts{% \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl + \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{25pt}} \def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl + \def\lsize{sec}\def\lllsize{text}% \resetmathfonts \setleading{19pt}} \def\secfonts{% \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \let\tenttsl=\secttsl + \def\lsize{subsec}\def\lllsize{reduced}% \resetmathfonts \setleading{16pt}} \def\subsecfonts{% \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \let\tenttsl=\ssecttsl + \def\lsize{text}\def\lllsize{small}% \resetmathfonts \setleading{15pt}} -\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? -\def\indexfonts{% - \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl - \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc - \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl - \resetmathfonts \setleading{12pt}} +\let\subsubsecfonts = \subsecfonts +\def\reducedfonts{% + \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl + \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc + \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy + \let\tenttsl=\reducedttsl + \def\lsize{small}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallerfonts{% + \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl + \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc + \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy + \let\tenttsl=\smallerttsl + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{9.5pt}} + +% Set the fonts to use with the @small... environments. +\let\smallexamplefonts = \smallfonts + +% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample +% can fit this many characters: +% 8.5x11=86 smallbook=72 a4=90 a5=69 +% If we use \scriptfonts (8pt), then we can fit this many characters: +% 8.5x11=90+ smallbook=80 a4=90+ a5=77 +% For me, subjectively, the few extra characters that fit aren't worth +% the additional smallness of 8pt. So I'm making the default 9pt. +% +% By the way, for comparison, here's what fits with @example (10pt): +% 8.5x11=71 smallbook=60 a4=75 a5=58 +% +% I wish the USA used A4 paper. +% --karl, 24jan03. + % Set up the default fonts, so we can use them for creating boxes. % -\textfonts +\textfonts \rm % Define these so they can be easily changed for other fonts. \def\angleleft{$\langle$} @@ -1042,23 +1679,32 @@ where each line of input produces a line of output.} % Fonts for short table of contents. \setfont\shortcontrm\rmshape{12}{1000} -\setfont\shortcontbf\bxshape{12}{1000} +\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12 \setfont\shortcontsl\slshape{12}{1000} +\setfont\shortconttt\ttshape{12}{1000} %% Add scribe-like font environments, plus @l for inline lisp (usually sans %% serif) and @ii for TeX italic % \smartitalic{ARG} outputs arg in italics, followed by an italic correction % unless the following character is such as not to need one. -\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} -\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx} -\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx} +\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else + \ptexslash\fi\fi\fi} +\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} +\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} + +% like \smartslanted except unconditionally uses \ttsl. +% @var is set to this for defun arguments. +\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} + +% like \smartslanted except unconditionally use \sl. We never want +% ttsl for book titles, do we? +\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} \let\i=\smartitalic \let\var=\smartslanted \let\dfn=\smartslanted \let\emph=\smartitalic -\let\cite=\smartslanted \def\b#1{{\bf #1}} \let\strong=\b @@ -1070,15 +1716,25 @@ where each line of input produces a line of output.} \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} \def\restorehyphenation{\hyphenchar\font = `- } +% Set sfcode to normal for the chars that usually have another value. +% Can't use plain's \frenchspacing because it uses the `\x notation, and +% sometimes \x has an active definition that messes things up. +% +\catcode`@=11 + \def\frenchspacing{% + \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m + \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + } +\catcode`@=\other + \def\t#1{% {\tt \rawbackslash \frenchspacing #1}% \null } -\let\ttfont=\t \def\samp#1{`\tclose{#1}'\null} -\setfont\smallrm\rmshape{8}{1000} -\font\smallsy=cmsy9 -\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{% +\setfont\keyrm\rmshape{8}{1000} +\font\keysy=cmsy9 +\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% \vbox{\hrule\kern-0.4pt \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% @@ -1115,7 +1771,7 @@ where each line of input produces a line of output.} \null } -% We *must* turn on hyphenation at `-' and `_' in \code. +% We *must* turn on hyphenation at `-' and `_' in @code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. @@ -1133,27 +1789,30 @@ where each line of input produces a line of output.} \catcode`\_=\active \let_\codeunder \codex } - % - % If we end up with any active - characters when handling the index, - % just treat them as a normal -. - \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} \def\codedash{-\discretionary{}{}{}} -\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}} +\def\codeunder{% + % this is all so @math{@code{var_name}+1} can work. In math mode, _ + % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) + % will therefore expand the active definition of _, which is us + % (inside @code that is), therefore an endless loop. + \ifusingtt{\ifmmode + \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. + \else\normalunderscore \fi + \discretionary{}{}{}}% + {\_}% +} \def\codex #1{\tclose{#1}\endgroup} -%\let\exp=\tclose %Was temporary - % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). -\def\kbdinputstyle{\parsearg\kbdinputstylexxx} -\def\kbdinputstylexxx#1{% +\parseargdef\kbdinputstyle{% \def\arg{#1}% \ifx\arg\worddistinct \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% @@ -1161,15 +1820,17 @@ where each line of input produces a line of output.} \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% \else\ifx\arg\wordcode \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle option `\arg'}% \fi\fi\fi } \def\worddistinct{distinct} \def\wordexample{example} \def\wordcode{code} -% Default is kbdinputdistinct. (Too much of a hassle to call the macro, -% the catcodes are wrong for parsearg to work.) -\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl} +% Default is `distinct.' +\kbdinputstyle distinct \def\xkey{\key} \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% @@ -1189,24 +1850,43 @@ where each line of input produces a line of output.} % a hypertex \special here. % \def\uref#1{\douref #1,,,\finish} -\def\douref#1,#2,#3,#4\finish{% +\def\douref#1,#2,#3,#4\finish{\begingroup + \unsepspaces + \pdfurl{#1}% \setbox0 = \hbox{\ignorespaces #3}% \ifdim\wd0 > 0pt \unhbox0 % third arg given, show only that \else \setbox0 = \hbox{\ignorespaces #2}% \ifdim\wd0 > 0pt - \unhbox0\ (\code{#1})% second arg given, show both it and url + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url + \fi \else \code{#1}% only url given, so show it \fi \fi -} + \endlink +\endgroup} -% rms does not like the angle brackets --karl, 17may97. -% So now @email is just like @uref. +% rms does not like angle brackets --karl, 17may97. +% So now @email is just like @uref, unless we are pdf. +% %\def\email#1{\angleleft{\tt #1}\angleright} -\let\email=\uref +\ifpdf + \def\email#1{\doemail#1,,\finish} + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi + \endlink + \endgroup} +\else + \let\email=\uref +\fi % Check if we are currently using a typewriter font. Since all the % Computer Modern typewriter fonts have zero interword stretch (and @@ -1232,12 +1912,29 @@ where each line of input produces a line of output.} \def\sc#1{{\smallcaps#1}} % smallcaps font \def\ii#1{{\it #1}} % italic font -% @acronym downcases the argument and prints in smallcaps. -\def\acronym#1{{\smallcaps \lowercase{#1}}} +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} -% @pounds{} is a sterling sign. +% @pounds{} is a sterling sign, which is in the CM italic font. +% \def\pounds{{\it\$}} +% @registeredsymbol - R in a circle. The font for the R should really +% be smaller yet, but lllsize is the best we can do for now. +% Adapted from the plain.tex definition of \copyright. +% +\def\registeredsymbol{% + $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% + \hfil\crcr\Orb}}% + }$% +} + \message{page headings,} @@ -1256,84 +1953,103 @@ where each line of input produces a line of output.} \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue -\def\shorttitlepage{\parsearg\shorttitlepagezzz} -\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% +\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% \endgroup\page\hbox{}\page} -\def\titlepage{\begingroup \parindent=0pt \textfonts - \let\subtitlerm=\tenrm - \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% - % - \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% - % - % Leave some space at the very top of the page. - \vglue\titlepagetopglue - % - % Now you can print the title using @title. - \def\title{\parsearg\titlezzz}% - \def\titlezzz##1{\leftline{\titlefonts\rm ##1} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% - % No rule at page bottom unless we print one at the top with @title. - \finishedtitlepagetrue - % - % Now you can put text using @subtitle. - \def\subtitle{\parsearg\subtitlezzz}% - \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% - % - % @author should come last, but may come many times. - \def\author{\parsearg\authorzzz}% - \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi - {\authorfont \leftline{##1}}}% - % - % Most title ``pages'' are actually two pages long, with space - % at the top of the second. We don't want the ragged left on the second. - \let\oldpage = \page - \def\page{% +\envdef\titlepage{% + % Open one extra group, as we want to close it in the middle of \Etitlepage. + \begingroup + \parindent=0pt \textfonts + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% \iffinishedtitlepage\else - \finishtitlepage + \finishtitlepage \fi - \oldpage \let\page = \oldpage - \hbox{}}% -% \def\page{\oldpage \hbox{}} + \page + \null + }% } \def\Etitlepage{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - % It is important to do the page break before ending the group, - % because the headline and footline are only empty inside the group. - % If we use the new definition of \page, we always get a blank page - % after the title page, which we certainly don't want. - \oldpage - \endgroup - % - % If they want short, they certainly want long too. - \ifsetshortcontentsaftertitlepage - \shortcontents - \contents - \global\let\shortcontents = \relax - \global\let\contents = \relax - \fi - % - \ifsetcontentsaftertitlepage - \contents - \global\let\contents = \relax - \global\let\shortcontents = \relax - \fi - % - \HEADINGSon + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi } \def\finishtitlepage{% - \vskip4pt \hrule height 2pt width \hsize - \vskip\titlepagebottomglue - \finishedtitlepagetrue + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +%%% Macros to be used within @titlepage: + +\let\subtitlerm=\tenrm +\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} + +\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines + \let\tt=\authortt} + +\parseargdef\title{% + \checkenv\titlepage + \leftline{\titlefonts\rm #1} + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt +} + +\parseargdef\subtitle{% + \checkenv\titlepage + {\subtitlefont \rightline{#1}}% +} + +% @author should come last, but may come many times. +% It can also be used inside @quotation. +% +\parseargdef\author{% + \def\temp{\quotation}% + \ifx\thisenv\temp + \def\quotationauthor{#1}% printed in \Equotation. + \else + \checkenv\titlepage + \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi + {\authorfont \leftline{#1}}% + \fi } + %%% Set up page headings and footings. \let\thispage=\folio @@ -1343,7 +2059,7 @@ where each line of input produces a line of output.} \newtoks\evenfootline % footline on even pages \newtoks\oddfootline % footline on odd pages -% Now make Tex use those variables +% Now make TeX use those variables \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}} \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline @@ -1357,32 +2073,27 @@ where each line of input produces a line of output.} % @evenfooting @thisfile|| % @oddfooting ||@thisfile -\def\evenheading{\parsearg\evenheadingxxx} -\def\oddheading{\parsearg\oddheadingxxx} -\def\everyheading{\parsearg\everyheadingxxx} - -\def\evenfooting{\parsearg\evenfootingxxx} -\def\oddfooting{\parsearg\oddfootingxxx} -\def\everyfooting{\parsearg\everyfootingxxx} - -{\catcode`\@=0 % -\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} -\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% +\def\evenheading{\parsearg\evenheadingxxx} +\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} +\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} -\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% +\def\oddheading{\parsearg\oddheadingxxx} +\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} +\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% +\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% -\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} -\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% +\def\evenfooting{\parsearg\evenfootingxxx} +\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} +\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} -\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% +\def\oddfooting{\parsearg\oddfootingxxx} +\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} +\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% % % Leave some space for the footline. Hopefully ok to assume @@ -1391,9 +2102,8 @@ where each line of input produces a line of output.} \global\advance\vsize by -\baselineskip } -\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} -% -}% unbind the catcode of @. +\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} + % @headings double turns headings on for double-sided printing. % @headings single turns headings on for single-sided printing. @@ -1407,7 +2117,7 @@ where each line of input produces a line of output.} \def\headings #1 {\csname HEADINGS#1\endcsname} -\def\HEADINGSoff{ +\def\HEADINGSoff{% \global\evenheadline={\hfil} \global\evenfootline={\hfil} \global\oddheadline={\hfil} \global\oddfootline={\hfil}} \HEADINGSoff @@ -1416,7 +2126,7 @@ where each line of input produces a line of output.} % chapter name on inside top of right hand pages, document % title on inside top of left hand pages, and page numbers on outside top % edge of all pages. -\def\HEADINGSdouble{ +\def\HEADINGSdouble{% \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} @@ -1428,7 +2138,7 @@ where each line of input produces a line of output.} % For single-sided printing, chapter title goes across top left of page, % page number on top right. -\def\HEADINGSsingle{ +\def\HEADINGSsingle{% \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} @@ -1458,7 +2168,10 @@ where each line of input produces a line of output.} } % Subroutines used in generating headings -% Produces Day Month Year style of output. +% This produces Day Month Year style of output. +% Only define if not already defined, in case a txi-??.tex file has set +% up a different format (e.g., txi-cs.tex does this). +\ifx\today\undefined \def\today{% \number\day\space \ifcase\month @@ -1467,16 +2180,16 @@ where each line of input produces a line of output.} \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec \fi \space\number\year} +\fi % @settitle line... specifies the title of the document, for headings. % It generates no output of its own. \def\thistitle{\putwordNoTitle} -\def\settitle{\parsearg\settitlezzz} -\def\settitlezzz #1{\gdef\thistitle{#1}} +\def\settitle{\parsearg{\gdef\thistitle}} \message{tables,} -% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). +% Tables -- @table, @ftable, @vtable, @item(x). % default indentation of table text \newdimen\tableindent \tableindent=.8in @@ -1488,7 +2201,7 @@ where each line of input produces a line of output.} % used internally for \itemindent minus \itemmargin \newdimen\itemmax -% Note @table, @vtable, and @vtable define @item, @itemx, etc., with +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with % these defs. % They also define \itemindex % to index the item name in whatever manner is desired (perhaps none). @@ -1500,22 +2213,10 @@ where each line of input produces a line of output.} \def\internalBitem{\smallbreak \parsearg\itemzzz} \def\internalBitemx{\itemxpar \parsearg\itemzzz} -\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} -\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz} - -\def\internalBkitem{\smallbreak \parsearg\kitemzzz} -\def\internalBkitemx{\itemxpar \parsearg\kitemzzz} - -\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% - \itemzzz {#1}} - -\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% - \itemzzz {#1}} - \def\itemzzz #1{\begingroup % \advance\hsize by -\rightskip \advance\hsize by -\tableindent - \setbox0=\hbox{\itemfont{#1}}% + \setbox0=\hbox{\itemindicate{#1}}% \itemindex{#1}% \nobreak % This prevents a break before @itemx. % @@ -1539,10 +2240,18 @@ where each line of input produces a line of output.} % \parskip glue -- logically it's part of the @item we just started. \nobreak \vskip-\parskip % - % Stop a page break at the \parskip glue coming up. Unfortunately + % Stop a page break at the \parskip glue coming up. (Unfortunately % we can't prevent a possible page break at the following - % \baselineskip glue. - \nobreak + % \baselineskip glue.) However, if what follows is an environment + % such as @example, there will be no \parskip glue; then + % the negative vskip we just would cause the example and the item to + % crash together. So we use this bizarre value of 10001 as a signal + % to \aboveenvbreak to insert \parskip glue after all. + % (Possibly there are other commands that could be followed by + % @example which need the same treatment, but not section titles; or + % maybe section titles are the only special case and they should be + % penalty 10001...) + \penalty 10001 \endgroup \itemxneedsnegativevskipfalse \else @@ -1561,97 +2270,95 @@ where each line of input produces a line of output.} \fi } -\def\item{\errmessage{@item while not in a table}} -\def\itemx{\errmessage{@itemx while not in a table}} -\def\kitem{\errmessage{@kitem while not in a table}} -\def\kitemx{\errmessage{@kitemx while not in a table}} -\def\xitem{\errmessage{@xitem while not in a table}} -\def\xitemx{\errmessage{@xitemx while not in a table}} - -% Contains a kludge to get @end[description] to work. -\def\description{\tablez{\dontindex}{1}{}{}{}{}} +\def\item{\errmessage{@item while not in a list environment}} +\def\itemx{\errmessage{@itemx while not in a list environment}} % @table, @ftable, @vtable. -\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} -{\obeylines\obeyspaces% -\gdef\tablex #1^^M{% -\tabley\dontindex#1 \endtabley}} - -\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} -{\obeylines\obeyspaces% -\gdef\ftablex #1^^M{% -\tabley\fnitemindex#1 \endtabley -\def\Eftable{\endgraf\afterenvbreak\endgroup}% -\let\Etable=\relax}} - -\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex} -{\obeylines\obeyspaces% -\gdef\vtablex #1^^M{% -\tabley\vritemindex#1 \endtabley -\def\Evtable{\endgraf\afterenvbreak\endgroup}% -\let\Etable=\relax}} - -\def\dontindex #1{} -\def\fnitemindex #1{\doind {fn}{\code{#1}}}% -\def\vritemindex #1{\doind {vr}{\code{#1}}}% - -{\obeyspaces % -\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% -\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} - -\def\tablez #1#2#3#4#5#6{% -\aboveenvbreak % -\begingroup % -\def\Edescription{\Etable}% Necessary kludge. -\let\itemindex=#1% -\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % -\ifnum 0#4>0 \tableindent=#4\mil \fi % -\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % -\def\itemfont{#2}% -\itemmax=\tableindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \tableindent % -\exdentamount=\tableindent -\parindent = 0pt -\parskip = \smallskipamount -\ifdim \parskip=0pt \parskip=2pt \fi% -\def\Etable{\endgraf\afterenvbreak\endgroup}% -\let\item = \internalBitem % -\let\itemx = \internalBitemx % -\let\kitem = \internalBkitem % -\let\kitemx = \internalBkitemx % -\let\xitem = \internalBxitem % -\let\xitemx = \internalBxitemx % +\envdef\table{% + \let\itemindex\gobble + \tablex +} +\envdef\ftable{% + \def\itemindex ##1{\doind {fn}{\code{##1}}}% + \tablex +} +\envdef\vtable{% + \def\itemindex ##1{\doind {vr}{\code{##1}}}% + \tablex +} +\def\tablex#1{% + \def\itemindicate{#1}% + \parsearg\tabley } +\def\tabley#1{% + {% + \makevalueexpandable + \edef\temp{\noexpand\tablez #1\space\space\space}% + \expandafter + }\temp \endtablez +} +\def\tablez #1 #2 #3 #4\endtablez{% + \aboveenvbreak + \ifnum 0#1>0 \advance \leftskip by #1\mil \fi + \ifnum 0#2>0 \tableindent=#2\mil \fi + \ifnum 0#3>0 \advance \rightskip by #3\mil \fi + \itemmax=\tableindent + \advance \itemmax by -\itemmargin + \advance \leftskip by \tableindent + \exdentamount=\tableindent + \parindent = 0pt + \parskip = \smallskipamount + \ifdim \parskip=0pt \parskip=2pt \fi + \let\item = \internalBitem + \let\itemx = \internalBitemx +} +\def\Etable{\endgraf\afterenvbreak} +\let\Eftable\Etable +\let\Evtable\Etable +\let\Eitemize\Etable +\let\Eenumerate\Etable % This is the counter used by @enumerate, which is really @itemize \newcount \itemno -\def\itemize{\parsearg\itemizezzz} +\envdef\itemize{\parsearg\doitemize} -\def\itemizezzz #1{% - \begingroup % ended by the @end itemize - \itemizey {#1}{\Eitemize} +\def\doitemize#1{% + \aboveenvbreak + \itemmax=\itemindent + \advance\itemmax by -\itemmargin + \advance\leftskip by \itemindent + \exdentamount=\itemindent + \parindent=0pt + \parskip=\smallskipamount + \ifdim\parskip=0pt \parskip=2pt \fi + \def\itemcontents{#1}% + % @itemize with no arg is equivalent to @itemize @bullet. + \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + \let\item=\itemizeitem } -\def\itemizey #1#2{% -\aboveenvbreak % -\itemmax=\itemindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \itemindent % -\exdentamount=\itemindent -\parindent = 0pt % -\parskip = \smallskipamount % -\ifdim \parskip=0pt \parskip=2pt \fi% -\def#2{\endgraf\afterenvbreak\endgroup}% -\def\itemcontents{#1}% -\let\item=\itemizeitem} - -% Set sfcode to normal for the chars that usually have another value. -% These are `.?!:;,' -\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 - \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } +% Definition of @item while inside @itemize and @enumerate. +% +\def\itemizeitem{% + \advance\itemno by 1 % for enumerations + {\let\par=\endgraf \smallbreak}% reasonable place to break + {% + % If the document has an @itemize directly after a section title, a + % \nobreak will be last on the list, and \sectionheading will have + % done a \vskip-\parskip. In that case, we don't want to zero + % parskip, or the item text will crash with the heading. On the + % other hand, when there is normal text preceding the item (as there + % usually is), we do want to zero parskip, or there would be too much + % space. In that case, we won't have a \nobreak before. At least + % that's the theory. + \ifnum\lastpenalty<10000 \parskip=0in \fi + \noindent + \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + \vadjust{\penalty 1200}}% not good to break after first line of item. + \flushcr +} % \splitoff TOKENS\endmark defines \first to be the first token in % TOKENS, and \rest to be the remainder. @@ -1662,11 +2369,8 @@ where each line of input produces a line of output.} % or number, to specify the first label in the enumerated list. No % argument is the same as `1'. % -\def\enumerate{\parsearg\enumeratezzz} -\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} +\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} \def\enumeratey #1 #2\endenumeratey{% - \begingroup % ended by the @end enumerate - % % If we were given no argument, pretend we were given `1'. \def\thearg{#1}% \ifx\thearg\empty \def\thearg{1}\fi @@ -1737,13 +2441,13 @@ where each line of input produces a line of output.} }% } -% Call itemizey, adding a period to the first argument and supplying the +% Call \doitemize, adding a period to the first argument and supplying the % common last two arguments. Also subtract one from the initial value in % \itemno, since @item increments \itemno. % \def\startenumeration#1{% \advance\itemno by -1 - \itemizey{#1.}\Eenumerate\flushcr + \doitemize{#1.}\flushcr } % @alphaenumerate and @capsenumerate are abbreviations for giving an arg @@ -1754,16 +2458,6 @@ where each line of input produces a line of output.} \def\Ealphaenumerate{\Eenumerate} \def\Ecapsenumerate{\Eenumerate} -% Definition of @item while inside @itemize. - -\def\itemizeitem{% -\advance\itemno by 1 -{\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{In hmode at itemizeitem}\fi -{\parskip=0in \hskip 0pt -\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% -\vadjust{\penalty 1200}}% -\flushcr} % @multitable macros % Amy Hendrickson, 8/18/94, 3/6/96 @@ -1790,24 +2484,14 @@ where each line of input produces a line of output.} % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item ... % using the widest term desired in each column. -% -% For those who want to use more than one line's worth of words in -% the preamble, break the line within one argument and it -% will parse correctly, i.e., -% -% @multitable {Column 1 template} {Column 2 template} {Column 3 -% template} -% Not: -% @multitable {Column 1 template} {Column 2 template} -% {Column 3 template} % Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. -% @item, @tab, @multitable or @end multitable do not need to be on their -% own lines, but it will not hurt if they are. +% @item, @tab do not need to be on their own lines, but it will not hurt +% if they are. % Sample multitable: @@ -1851,13 +2535,12 @@ where each line of input produces a line of output.} \def\xcolumnfractions{\columnfractions} \newif\ifsetpercent -% #1 is the part of the @columnfraction before the decimal point, which -% is presumably either 0 or the empty string (but we don't check, we -% just throw it away). #2 is the decimal part, which we use as the -% percent of \hsize for this column. -\def\pickupwholefraction#1.#2 {% +% #1 is the @columnfraction, usually a decimal number like .5, but might +% be just 1. We just use it, whatever it is. +% +\def\pickupwholefraction#1 {% \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% + \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% \setuptable } @@ -1874,8 +2557,8 @@ where each line of input produces a line of output.} \let\go\pickupwholefraction \else \global\advance\colcount by 1 - \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; - % typically that is always in the input, anyway. + \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a + % separator; typically that is always in the input, anyway. \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% \fi \fi @@ -1890,17 +2573,30 @@ where each line of input produces a line of output.} \go } -% multitable syntax -\def\tab{&\hskip1sp\relax} % 2/2/96 - % tiny skip here makes sure this column space is - % maintained, even if it is never used. +% multitable-only commands. +% +% @headitem starts a heading row, which we typeset in bold. +% Assignments have to be global since we are inside the implicit group +% of an alignment entry. Note that \everycr resets \everytab. +\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% +% +% A \tab used to include \hskip1sp. But then the space in a template +% line is not enough. That is bad. So let's go back to just `&' until +% we encounter the problem it was intended to solve again. +% --karl, nathan@acm.org, 20apr99. +\def\tab{\checkenv\multitable &\the\everytab}% % @multitable ... @end multitable definitions: % -\def\multitable{\parsearg\dotable} -\def\dotable#1{\bgroup +\newtoks\everytab % insert after every tab. +% +\envdef\multitable{% \vskip\parskip + \startsavinginserts + % + % @item within a multitable starts a normal row. \let\item\crcr + % \tolerance=9500 \hbadness=9500 \setmultitablespacing @@ -1908,81 +2604,98 @@ where each line of input produces a line of output.} \parindent=\multitableparindent \overfullrule=0pt \global\colcount=0 - \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% % + \everycr = {% + \noalign{% + \global\everytab={}% + \global\colcount=0 % Reset the column counter. + % Check for saved footnotes, etc. + \checkinserts + % Keeps underfull box messages off when table breaks over pages. + %\filbreak + % Maybe so, but it also creates really weird page breaks when the + % table breaks over pages. Wouldn't \vfil be better? Wait until the + % problem manifests itself, so it can be fixed for real --karl. + }% + }% + % + \parsearg\domultitable +} +\def\domultitable#1{% % To parse everything between @multitable and @item: \setuptable#1 \endsetuptable % - % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. - % The table preamble - % looks at the current \colcount to find the correct column width. - \everycr{\noalign{% - % - % \filbreak%% keeps underfull box messages off when table breaks over pages. - % Maybe so, but it also creates really weird page breaks when the table - % breaks over pages. Wouldn't \vfil be better? Wait until the problem - % manifests itself, so it can be fixed for real --karl. - \global\colcount=0\relax}}% - % % This preamble sets up a generic column definition, which will % be used as many times as user calls for columns. % \vtop will set a single line and will also let text wrap and % continue for many paragraphs if desired. - \halign\bgroup&\global\advance\colcount by 1\relax - \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip - \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace - \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively marking - % characters. - \noindent\ignorespaces##\unskip\multistrut}\cr + \halign\bgroup &% + \global\advance\colcount by 1 + \multistrut + \vtop{% + % Use the current \colcount to find the correct column width: + \hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively + % marking characters. + \noindent\ignorespaces##\unskip\multistrut + }\cr +} +\def\Emultitable{% + \crcr + \egroup % end the \halign + \global\setpercentfalse } \def\setmultitablespacing{% test to see if user has set \multitablelinespace. % If so, do nothing. If not, give it an appropriate dimension based on % current baselineskip. \ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 %% strut to put in table in case some entry doesn't have descenders, %% to keep lines equally spaced \let\multistrut = \strut -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. \else +%% FIXME: what is \box0 supposed to be? \gdef\multistrut{\vrule height\multitablelinespace depth\dp0 width0pt\relax} \fi +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller @@ -1996,281 +2709,172 @@ width0pt\relax} \fi \message{conditionals,} -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% - \let\chapter=\relax - \let\unnumbered=\relax - \let\top=\relax - \let\unnumberedsec=\relax - \let\unnumberedsection=\relax - \let\unnumberedsubsec=\relax - \let\unnumberedsubsection=\relax - \let\unnumberedsubsubsec=\relax - \let\unnumberedsubsubsection=\relax - \let\section=\relax - \let\subsec=\relax - \let\subsubsec=\relax - \let\subsection=\relax - \let\subsubsection=\relax - \let\appendix=\relax - \let\appendixsec=\relax - \let\appendixsection=\relax - \let\appendixsubsec=\relax - \let\appendixsubsection=\relax - \let\appendixsubsubsec=\relax - \let\appendixsubsubsection=\relax - \let\contents=\relax - \let\smallbook=\relax - \let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. -% -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \relax - \let\deffn = \relax - \let\deffnx = \relax - \let\defindex = \relax - \let\defivar = \relax - \let\defmac = \relax - \let\defmethod = \relax - \let\defop = \relax - \let\defopt = \relax - \let\defspec = \relax - \let\deftp = \relax - \let\deftypefn = \relax - \let\deftypefun = \relax - \let\deftypevar = \relax - \let\deftypevr = \relax - \let\defun = \relax - \let\defvar = \relax - \let\defvr = \relax - \let\ref = \relax - \let\xref = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\settitle = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\everyheading = \relax - \let\evenheading = \relax - \let\oddheading = \relax - \let\everyfooting = \relax - \let\evenfooting = \relax - \let\oddfooting = \relax - \let\headings = \relax - \let\include = \relax - \let\lowersections = \relax - \let\down = \relax - \let\raisesections = \relax - \let\up = \relax - \let\set = \relax - \let\clear = \relax - \let\item = \relax -} - -% Ignore @ignore ... @end ignore. + +% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, +% @ifnotxml always succeed. They currently do nothing; we don't +% attempt to check whether the conditionals are properly nested. But we +% have to remember that they are conditionals, so that @end doesn't +% attempt to close an environment group. % -\def\ignore{\doignore{ignore}} +\def\makecond#1{% + \expandafter\let\csname #1\endcsname = \relax + \expandafter\let\csname iscond.#1\endcsname = 1 +} +\makecond{iftex} +\makecond{ifnotdocbook} +\makecond{ifnothtml} +\makecond{ifnotinfo} +\makecond{ifnotplaintext} +\makecond{ifnotxml} -% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. +% Ignore @ignore, @ifhtml, @ifinfo, and the like. % -\def\ifinfo{\doignore{ifinfo}} +\def\direntry{\doignore{direntry}} +\def\documentdescription{\doignore{documentdescription}} +\def\docbook{\doignore{docbook}} +\def\html{\doignore{html}} +\def\ifdocbook{\doignore{ifdocbook}} \def\ifhtml{\doignore{ifhtml}} +\def\ifinfo{\doignore{ifinfo}} \def\ifnottex{\doignore{ifnottex}} -\def\html{\doignore{html}} +\def\ifplaintext{\doignore{ifplaintext}} +\def\ifxml{\doignore{ifxml}} +\def\ignore{\doignore{ignore}} \def\menu{\doignore{menu}} -\def\direntry{\doignore{direntry}} - -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment +\def\xml{\doignore{xml}} -% Ignore text until a line `@end #1'. +% Ignore text until a line `@end #1', keeping track of nested conditionals. % +% A count to remember the depth of nesting. +\newcount\doignorecount + \def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - % This @ is a catcode 12 token (that is the normal catcode of @ in - % this texinfo.tex file). We change the catcode of @ below to match. - \long\def\doignoretext##1@end #1{\enddoignore}% + % Scan in ``verbatim'' mode: + \catcode`\@ = \other + \catcode`\{ = \other + \catcode`\} = \other % % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode32 = 10 - % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % - % We must not have @c interpreted as a control sequence. - \catcode`\@ = 12 - % - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 - % - % And now expand that command. - \doignoretext -} - -% What we do to finish off ignored text. -% -\def\enddoignore{\endgroup\ignorespaces}% - -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{WARNING: for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi + \spaceisspace + % + % Count number of #1's that we've seen. + \doignorecount = 0 + % + % Swallow text until we reach the matching `@end #1'. + \dodoignore {#1}% } -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. -% -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the change of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook: make the current font be a dummy font. +{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. + \obeylines % % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because not all sites - % might have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. - % - \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont - % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 - % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 + \gdef\dodoignore#1{% + % #1 contains the string `ifinfo'. % - % Do minimal line-breaking. - \pretolerance = 10000 + % Define a command to find the next `@end #1', which must be on a line + % by itself. + \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}% + % And this command to find another #1 command, at the beginning of a + % line. (Otherwise, we would consider a line `@c @ifset', for + % example, to count as an @ifset for nesting.) + \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% % - % Do not execute instructions in @tex - \def\tex{\doignore{tex}}% - % Do not execute macro definitions. - % `c' is a comment character, so the word `macro' will get cut off. - \def\macro{\doignore{ma}}% + % And now expand that command. + \obeylines % + \doignoretext ^^M% + }% +} + +\def\doignoreyyy#1{% + \def\temp{#1}% + \ifx\temp\empty % Nothing found. + \let\next\doignoretextzzz + \else % Found a nested condition, ... + \advance\doignorecount by 1 + \let\next\doignoretextyyy % ..., look for another. + % If we're here, #1 ends with ^^M\ifinfo (for example). + \fi + \next #1% the token \_STOP_ is present just after this macro. +} + +% We have to swallow the remaining "\_STOP_". +% +\def\doignoretextzzz#1{% + \ifnum\doignorecount = 0 % We have just found the outermost @end. + \let\next\enddoignore + \else % Still inside a nested condition. + \advance\doignorecount by -1 + \let\next\doignoretext % Look for the next @end. + \fi + \next } +% Finish off ignored text. +\def\enddoignore{\endgroup\ignorespaces} + + % @set VAR sets the variable VAR to an empty value. % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. % % Since we want to separate VAR from REST-OF-LINE (which might be % empty), we can't just use \parsearg; we have to insert a space of our % own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. +% didn't need it. +% We rely on the fact that \parsearg sets \catcode`\ =10. % -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} +\parseargdef\set{\setyyy#1 \endsetyyy} \def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup + {% + \makevalueexpandable + \def\temp{#2}% + \edef\next{\gdef\makecsname{SET#1}}% + \ifx\temp\empty + \next{}% + \else + \setzzz#2\endsetzzz + \fi + }% } -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} +% Remove the trailing space \setxxx inserted. +\def\setzzz#1 \endsetzzz{\next{#1}} % @clear VAR clears (i.e., unsets) the variable VAR. % -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} +\parseargdef\clear{% + {% + \makevalueexpandable + \global\expandafter\let\csname SET#1\endcsname=\relax + }% +} % @value{foo} gets the text saved in variable foo. +\def\value{\begingroup\makevalueexpandable\valuexxx} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} { - \catcode`\_ = \active + \catcode`\- = \active \catcode`\_ = \active % - % We might end up with active _ or - characters in the argument if - % we're called from @code, as @code{@value{foo-bar_}}. So \let any - % such active characters to their normal equivalents. - \gdef\value{\begingroup - \catcode`\-=12 \catcode`\_=12 - \indexbreaks \let_\normalunderscore - \valuexxx} + \gdef\makevalueexpandable{% + \let\value = \expandablevalue + % We don't want these characters active, ... + \catcode`\-=\other \catcode`\_=\other + % ..., but we might end up with active ones in the argument if + % we're called from @code, as @code{@value{foo-bar_}}, though. + % So \let them to their normal equivalents. + \let-\realdash \let_\normalunderscore + } } -\def\valuexxx#1{\expandablevalue{#1}\endgroup} % We have this subroutine so that we can handle at least some @value's -% properly in indexes (we \let\value to this in \indexdummies). Ones -% whose names contain - or _ still won't work, but we can't do anything -% about that. The command has to be fully expandable, since the result -% winds up in the index file. This means that if the variable's value -% contains other Texinfo commands, it's almost certain it will fail -% (although perhaps we could fix that with sufficient work to do a -% one-level expansion on the result, instead of complete). +% properly in indexes (we call \makevalueexpandable in \indexdummies). +% The command has to be fully expandable (if the variable is set), since +% the result winds up in the index file. This means that if the +% variable's value contains other Texinfo commands, it's almost certain +% it will fail (although perhaps we could fix that with sufficient work +% to do a one-level expansion on the result, instead of complete). % \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax {[No value for ``#1'']}% + \message{Variable `#1', used in @value, is not set.}% \else \csname SET#1\endcsname \fi @@ -2279,66 +2883,36 @@ width0pt\relax} \fi % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. % -\def\ifset{\parsearg\ifsetxxx} -\def\ifsetxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifsetfail - \else - \expandafter\ifsetsucceed - \fi +% To get special treatment of `@end ifset,' call \makeond and the redefine. +% +\makecond{ifset} +\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} +\def\doifset#1#2{% + {% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname SET#2\endcsname\relax + #1% If not set, redefine \next. + \fi + \expandafter + }\next } -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} +\def\ifsetfail{\doignore{ifset}} % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % -\def\ifclear{\parsearg\ifclearxxx} -\def\ifclearxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifclearsucceed - \else - \expandafter\ifclearfail - \fi -} -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. -% -\def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} -\defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} - -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no -% effect (they'd get reverted at the end of the group). So we must -% define \Eiftex to redefine itself to be its previous value. (We can't -% just define it to fail again with an ``unmatched end'' error, since -% the @ifset might be nested.) -% -\def\conditionalsucceed#1{% - \edef\temp{% - % Remember the current value of \E#1. - \let\nece{prevE#1} = \nece{E#1}% - % - % At the `@end #1', redefine \E#1 to be its previous value. - \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% - }% - \temp -} - -% We need to expand lots of \csname's, but we don't want to expand the -% control sequences after we've constructed them. +% The `\else' inside the `\doifset' parameter is a trick to reuse the +% above code: if the variable is not set, do nothing, if it is set, +% then redefine \next to \ifclearfail. % -\def\nece#1{\expandafter\noexpand\csname#1\endcsname} +\makecond{ifclear} +\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} +\def\ifclearfail{\doignore{ifclear}} + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory=\comment % @defininfoenclose. \let\definfoenclose=\comment @@ -2370,42 +2944,48 @@ width0pt\relax} \fi } % @defindex foo == \newindex{foo} - +% \def\defindex{\parsearg\newindex} % Define @defcodeindex, like @defindex except put all entries in @code. - +% +\def\defcodeindex{\parsearg\newcodeindex} +% \def\newcodeindex#1{% \iflinks \expandafter\newwrite \csname#1indfile\endcsname \openout \csname#1indfile\endcsname \jobname.#1 \fi \expandafter\xdef\csname#1index\endcsname{% - \noexpand\docodeindex{#1}} + \noexpand\docodeindex{#1}}% } -\def\defcodeindex{\parsearg\newcodeindex} % @synindex foo bar makes index foo feed into index bar. % Do this instead of @defindex foo if you don't want it as a separate index. -% The \closeout helps reduce unnecessary open files; the limit on the -% Acorn RISC OS is a mere 16 files. -\def\synindex#1 #2 {% - \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname - \expandafter\closeout\csname#1indfile\endcsname - \expandafter\let\csname#1indfile\endcsname=\synindexfoo - \expandafter\xdef\csname#1index\endcsname{% define \xxxindex - \noexpand\doindex{#2}}% -} - +% % @syncodeindex foo bar similar, but put all entries made for index foo % inside @code. -\def\syncodeindex#1 #2 {% - \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname - \expandafter\closeout\csname#1indfile\endcsname - \expandafter\let\csname#1indfile\endcsname=\synindexfoo - \expandafter\xdef\csname#1index\endcsname{% define \xxxindex - \noexpand\docodeindex{#2}}% +% +\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} +\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} + +% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), +% #3 the target index (bar). +\def\dosynindex#1#2#3{% + % Only do \closeout if we haven't already done it, else we'll end up + % closing the target index. + \expandafter \ifx\csname donesynindex#2\endcsname \undefined + % The \closeout helps reduce unnecessary open files; the limit on the + % Acorn RISC OS is a mere 16 files. + \expandafter\closeout\csname#2indfile\endcsname + \expandafter\let\csname\donesynindex#2\endcsname = 1 + \fi + % redefine \fooindfile: + \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname + \expandafter\let\csname#2indfile\endcsname=\temp + % redefine \fooindex: + \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% } % Define \doindex, the driver for all \fooindex macros. @@ -2425,264 +3005,388 @@ width0pt\relax} \fi \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} +% Take care of Texinfo commands that can appear in an index entry. +% Since there are some commands we want to expand, and others we don't, +% we have to laboriously prevent expansion for those that we don't. +% \def\indexdummies{% -\def\ { }% -% Take care of the plain tex accent commands. -\def\"{\realbackslash "}% -\def\`{\realbackslash `}% -\def\'{\realbackslash '}% -\def\^{\realbackslash ^}% -\def\~{\realbackslash ~}% -\def\={\realbackslash =}% -\def\b{\realbackslash b}% -\def\c{\realbackslash c}% -\def\d{\realbackslash d}% -\def\u{\realbackslash u}% -\def\v{\realbackslash v}% -\def\H{\realbackslash H}% -% Take care of the plain tex special European modified letters. -\def\oe{\realbackslash oe}% -\def\ae{\realbackslash ae}% -\def\aa{\realbackslash aa}% -\def\OE{\realbackslash OE}% -\def\AE{\realbackslash AE}% -\def\AA{\realbackslash AA}% -\def\o{\realbackslash o}% -\def\O{\realbackslash O}% -\def\l{\realbackslash l}% -\def\L{\realbackslash L}% -\def\ss{\realbackslash ss}% -% Take care of texinfo commands likely to appear in an index entry. -% (Must be a way to avoid doing expansion at all, and thus not have to -% laboriously list every single command here.) -\def\@{@}% will be @@ when we switch to @ as escape char. -% Need these in case \tex is in effect and \{ is a \delimiter again. -% But can't use \lbracecmd and \rbracecmd because texindex assumes -% braces and backslashes are used only as delimiters. -\let\{ = \mylbrace -\let\} = \myrbrace -\def\_{{\realbackslash _}}% -\def\w{\realbackslash w }% -\def\bf{\realbackslash bf }% -%\def\rm{\realbackslash rm }% -\def\sl{\realbackslash sl }% -\def\sf{\realbackslash sf}% -\def\tt{\realbackslash tt}% -\def\gtr{\realbackslash gtr}% -\def\less{\realbackslash less}% -\def\hat{\realbackslash hat}% -\def\TeX{\realbackslash TeX}% -\def\dots{\realbackslash dots }% -\def\result{\realbackslash result}% -\def\equiv{\realbackslash equiv}% -\def\expansion{\realbackslash expansion}% -\def\print{\realbackslash print}% -\def\error{\realbackslash error}% -\def\point{\realbackslash point}% -\def\copyright{\realbackslash copyright}% -\def\tclose##1{\realbackslash tclose {##1}}% -\def\code##1{\realbackslash code {##1}}% -\def\uref##1{\realbackslash uref {##1}}% -\def\url##1{\realbackslash url {##1}}% -\def\env##1{\realbackslash env {##1}}% -\def\command##1{\realbackslash command {##1}}% -\def\option##1{\realbackslash option {##1}}% -\def\dotless##1{\realbackslash dotless {##1}}% -\def\samp##1{\realbackslash samp {##1}}% -\def\,##1{\realbackslash ,{##1}}% -\def\t##1{\realbackslash t {##1}}% -\def\r##1{\realbackslash r {##1}}% -\def\i##1{\realbackslash i {##1}}% -\def\b##1{\realbackslash b {##1}}% -\def\sc##1{\realbackslash sc {##1}}% -\def\cite##1{\realbackslash cite {##1}}% -\def\key##1{\realbackslash key {##1}}% -\def\file##1{\realbackslash file {##1}}% -\def\var##1{\realbackslash var {##1}}% -\def\kbd##1{\realbackslash kbd {##1}}% -\def\dfn##1{\realbackslash dfn {##1}}% -\def\emph##1{\realbackslash emph {##1}}% -\def\acronym##1{\realbackslash acronym {##1}}% -% -% Handle some cases of @value -- where the variable name does not -% contain - or _, and the value does not contain any -% (non-fully-expandable) commands. -\let\value = \expandablevalue -% -\unsepspaces -% Turn off macro expansion -\turnoffmacros -} - -% If an index command is used in an @example environment, any spaces -% therein should become regular spaces in the raw index file, not the -% expansion of \tie (\\leavevmode \penalty \@M \ ). -{\obeyspaces - \gdef\unsepspaces{\obeyspaces\let =\space}} - -% \indexnofonts no-ops all font-change commands. -% This is used when outputting the strings to sort the index by. -\def\indexdummyfont#1{#1} -\def\indexdummytex{TeX} -\def\indexdummydots{...} + \def\@{@}% change to @@ when we switch to @ as escape char in index files. + \def\ {\realbackslash\space }% + % Need these in case \tex is in effect and \{ is a \delimiter again. + % But can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. + \let\{ = \mylbrace + \let\} = \myrbrace + % + % \definedummyword defines \#1 as \realbackslash #1\space, thus + % effectively preventing its expansion. This is used only for control + % words, not control letters, because the \space would be incorrect + % for control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword##1{% + \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}% + }% + \def\definedummyletter##1{% + \expandafter\def\csname ##1\endcsname{\realbackslash ##1}% + }% + % + % Do the redefinitions. + \commondummies +} + +% For the aux file, @ is the escape character. So we want to redefine +% everything using @ instead of \realbackslash. When everything uses +% @, this will be simpler. +% +\def\atdummies{% + \def\@{@@}% + \def\ {@ }% + \let\{ = \lbraceatcmd + \let\} = \rbraceatcmd + % + % (See comments in \indexdummies.) + \def\definedummyword##1{% + \expandafter\def\csname ##1\endcsname{@##1\space}% + }% + \def\definedummyletter##1{% + \expandafter\def\csname ##1\endcsname{@##1}% + }% + % + % Do the redefinitions. + \commondummies +} + +% Called from \indexdummies and \atdummies. \definedummyword and +% \definedummyletter must be defined first. +% +\def\commondummies{% + % + \normalturnoffactive + % + \commondummiesnofonts + % + \definedummyletter{_}% + % + % Non-English letters. + \definedummyword{AA}% + \definedummyword{AE}% + \definedummyword{L}% + \definedummyword{OE}% + \definedummyword{O}% + \definedummyword{aa}% + \definedummyword{ae}% + \definedummyword{l}% + \definedummyword{oe}% + \definedummyword{o}% + \definedummyword{ss}% + \definedummyword{exclamdown}% + \definedummyword{questiondown}% + \definedummyword{ordf}% + \definedummyword{ordm}% + % + % Although these internal commands shouldn't show up, sometimes they do. + \definedummyword{bf}% + \definedummyword{gtr}% + \definedummyword{hat}% + \definedummyword{less}% + \definedummyword{sf}% + \definedummyword{sl}% + \definedummyword{tclose}% + \definedummyword{tt}% + % + \definedummyword{LaTeX}% + \definedummyword{TeX}% + % + % Assorted special characters. + \definedummyword{bullet}% + \definedummyword{copyright}% + \definedummyword{registeredsymbol}% + \definedummyword{dots}% + \definedummyword{enddots}% + \definedummyword{equiv}% + \definedummyword{error}% + \definedummyword{expansion}% + \definedummyword{minus}% + \definedummyword{pounds}% + \definedummyword{point}% + \definedummyword{print}% + \definedummyword{result}% + % + % Handle some cases of @value -- where it does not contain any + % (non-fully-expandable) commands. + \makevalueexpandable + % + % Normal spaces, not active ones. + \unsepspaces + % + % No macro expansion. + \turnoffmacros +} + +% \commondummiesnofonts: common to \commondummies and \indexnofonts. +% +% Better have this without active chars. +{ + \catcode`\~=\other + \gdef\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter{!}% + \definedummyletter{"}% + \definedummyletter{'}% + \definedummyletter{*}% + \definedummyletter{,}% + \definedummyletter{.}% + \definedummyletter{/}% + \definedummyletter{:}% + \definedummyletter{=}% + \definedummyletter{?}% + \definedummyletter{^}% + \definedummyletter{`}% + \definedummyletter{~}% + \definedummyword{u}% + \definedummyword{v}% + \definedummyword{H}% + \definedummyword{dotaccent}% + \definedummyword{ringaccent}% + \definedummyword{tieaccent}% + \definedummyword{ubaraccent}% + \definedummyword{udotaccent}% + \definedummyword{dotless}% + % + % Texinfo font commands. + \definedummyword{b}% + \definedummyword{i}% + \definedummyword{r}% + \definedummyword{sc}% + \definedummyword{t}% + % + % Commands that take arguments. + \definedummyword{acronym}% + \definedummyword{cite}% + \definedummyword{code}% + \definedummyword{command}% + \definedummyword{dfn}% + \definedummyword{emph}% + \definedummyword{env}% + \definedummyword{file}% + \definedummyword{kbd}% + \definedummyword{key}% + \definedummyword{math}% + \definedummyword{option}% + \definedummyword{samp}% + \definedummyword{strong}% + \definedummyword{tie}% + \definedummyword{uref}% + \definedummyword{url}% + \definedummyword{var}% + \definedummyword{verb}% + \definedummyword{w}% + } +} +% \indexnofonts is used when outputting the strings to sort the index +% by, and when constructing control sequence names. It eliminates all +% control sequences and just writes whatever the best ASCII sort string +% would be for a given command (usually its argument). +% \def\indexnofonts{% -% Just ignore accents. -\let\,=\indexdummyfont -\let\"=\indexdummyfont -\let\`=\indexdummyfont -\let\'=\indexdummyfont -\let\^=\indexdummyfont -\let\~=\indexdummyfont -\let\==\indexdummyfont -\let\b=\indexdummyfont -\let\c=\indexdummyfont -\let\d=\indexdummyfont -\let\u=\indexdummyfont -\let\v=\indexdummyfont -\let\H=\indexdummyfont -\let\dotless=\indexdummyfont -% Take care of the plain tex special European modified letters. -\def\oe{oe}% -\def\ae{ae}% -\def\aa{aa}% -\def\OE{OE}% -\def\AE{AE}% -\def\AA{AA}% -\def\o{o}% -\def\O{O}% -\def\l{l}% -\def\L{L}% -\def\ss{ss}% -\let\w=\indexdummyfont -\let\t=\indexdummyfont -\let\r=\indexdummyfont -\let\i=\indexdummyfont -\let\b=\indexdummyfont -\let\emph=\indexdummyfont -\let\strong=\indexdummyfont -\let\cite=\indexdummyfont -\let\sc=\indexdummyfont -%Don't no-op \tt, since it isn't a user-level command -% and is used in the definitions of the active chars like <, >, |... -%\let\tt=\indexdummyfont -\let\tclose=\indexdummyfont -\let\code=\indexdummyfont -\let\url=\indexdummyfont -\let\uref=\indexdummyfont -\let\env=\indexdummyfont -\let\command=\indexdummyfont -\let\option=\indexdummyfont -\let\file=\indexdummyfont -\let\samp=\indexdummyfont -\let\kbd=\indexdummyfont -\let\key=\indexdummyfont -\let\var=\indexdummyfont -\let\TeX=\indexdummytex -\let\dots=\indexdummydots -\def\@{@}% -} - -% To define \realbackslash, we must make \ not be an escape. -% We must first make another character (@) an escape -% so we do not become unable to do a definition. - -{\catcode`\@=0 \catcode`\\=\other - @gdef@realbackslash{\}} + \def\definedummyword##1{% + \expandafter\let\csname ##1\endcsname\asis + }% + \let\definedummyletter=\definedummyword + % + \commondummiesnofonts + % + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis + % + \def\ { }% + \def\@{@}% + % how to handle braces? + \def\_{\normalunderscore}% + % + % Non-English letters. + \def\AA{AA}% + \def\AE{AE}% + \def\L{L}% + \def\OE{OE}% + \def\O{O}% + \def\aa{aa}% + \def\ae{ae}% + \def\l{l}% + \def\oe{oe}% + \def\o{o}% + \def\ss{ss}% + \def\exclamdown{!}% + \def\questiondown{?}% + \def\ordf{a}% + \def\ordm{o}% + % + \def\LaTeX{LaTeX}% + \def\TeX{TeX}% + % + % Assorted special characters. + % (The following {} will end up in the sort string, but that's ok.) + \def\bullet{bullet}% + \def\copyright{copyright}% + \def\registeredsymbol{R}% + \def\dots{...}% + \def\enddots{...}% + \def\equiv{==}% + \def\error{error}% + \def\expansion{==>}% + \def\minus{-}% + \def\pounds{pounds}% + \def\point{.}% + \def\print{-|}% + \def\result{=>}% +} \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? -% For \ifx comparisons. -\def\emptymacro{\empty} - % Most index entries go through here, but \dosubind is the general case. -% -\def\doind#1#2{\dosubind{#1}{#2}\empty} +% #1 is the index name, #2 is the entry text. +\def\doind#1#2{\dosubind{#1}{#2}{}} % Workhorse for all \fooindexes. % #1 is name of index, #2 is stuff to put there, #3 is subentry -- -% \empty if called from \doind, as we usually are. The main exception -% is with defuns, which call us directly. +% empty if called from \doind, as we usually are (the main exception +% is with most defuns, which call us directly). % \def\dosubind#1#2#3{% + \iflinks + {% + % Store the main index entry text (including the third arg). + \toks0 = {#2}% + % If third arg is present, precede it with a space. + \def\thirdarg{#3}% + \ifx\thirdarg\empty \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + \edef\writeto{\csname#1indfile\endcsname}% + % + \ifvmode + \dosubindsanitize + \else + \dosubindwrite + \fi + }% + \fi +} + +% Write the entry in \toks0 to the index file: +% +\def\dosubindwrite{% % Put the index entry in the margin if desired. \ifx\SETmarginindex\relax\else - \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% \fi - {% - \count255=\lastpenalty - {% - \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ - {% - \let\folio = 0% We will expand all macros now EXCEPT \folio. - \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now - % so it will be output as is; and it will print as backslash. - % - \def\thirdarg{#3}% - % - % If third arg is present, precede it with space in sort key. - \ifx\thirdarg\emptymacro - \let\subentry = \empty - \else - \def\subentry{ #3}% - \fi - % - % First process the index entry with all font commands turned - % off to get the string to sort by. - {\indexnofonts \xdef\indexsorttmp{#2\subentry}}% - % - % Now the real index entry with the fonts. - \toks0 = {#2}% - % - % If third (subentry) arg is present, add it to the index - % string. And include a space. - \ifx\thirdarg\emptymacro \else - \toks0 = \expandafter{\the\toks0 \space #3}% - \fi - % - % Set up the complete index entry, with both the sort key - % and the original text, including any font commands. We write - % three arguments to \entry to the .?? file, texindex reduces to - % two when writing the .??s sorted result. - \edef\temp{% - \write\csname#1indfile\endcsname{% - \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% - }% - % - % If a skip is the last thing on the list now, preserve it - % by backing up by \lastskip, doing the \write, then inserting - % the skip again. Otherwise, the whatsit generated by the - % \write will make \lastskip zero. The result is that sequences - % like this: - % @end defun - % @tindex whatever - % @defun ... - % will have extra space inserted, because the \medbreak in the - % start of the @defun won't see the skip inserted by the @end of - % the previous defun. - % - % But don't do any of this if we're not in vertical mode. We - % don't want to do a \vskip and prematurely end a paragraph. - % - % Avoid page breaks due to these extra skips, too. - % - \iflinks - \ifvmode - \skip0 = \lastskip - \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi - \fi - % - \temp % do the write - % - % - \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi - \fi - }% - }% - \penalty\count255 + % + % Remember, we are within a group. + \indexdummies % Must do this here, since \bf, etc expand at this stage + \escapechar=`\\ + \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now + % so it will be output as is; and it will print as backslash. + % + % Process the index entry with all font commands turned off, to + % get the string to sort by. + {\indexnofonts + \edef\temp{\the\toks0}% need full expansion + \xdef\indexsorttmp{\temp}% }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\writeto{% + \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% + }% + \temp +} + +% Take care of unwanted page breaks: +% +% If a skip is the last thing on the list now, preserve it +% by backing up by \lastskip, doing the \write, then inserting +% the skip again. Otherwise, the whatsit generated by the +% \write will make \lastskip zero. The result is that sequences +% like this: +% @end defun +% @tindex whatever +% @defun ... +% will have extra space inserted, because the \medbreak in the +% start of the @defun won't see the skip inserted by the @end of +% the previous defun. +% +% But don't do any of this if we're not in vertical mode. We +% don't want to do a \vskip and prematurely end a paragraph. +% +% Avoid page breaks due to these extra skips, too. +% +% But wait, there is a catch there: +% We'll have to check whether \lastskip is zero skip. \ifdim is not +% sufficient for this purpose, as it ignores stretch and shrink parts +% of the skip. The only way seems to be to check the textual +% representation of the skip. +% +% The following is almost like \def\zeroskipmacro{0.0pt} except that +% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). +% +\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} +% +% ..., ready, GO: +% +\def\dosubindsanitize{% + % \lastskip and \lastpenalty cannot both be nonzero simultaneously. + \skip0 = \lastskip + \edef\lastskipmacro{\the\lastskip}% + \count255 = \lastpenalty + % + % If \lastskip is nonzero, that means the last item was a + % skip. And since a skip is discardable, that means this + % -\skip0 glue we're inserting is preceded by a + % non-discardable item, therefore it is not a potential + % breakpoint, therefore no \nobreak needed. + \ifx\lastskipmacro\zeroskipmacro + \else + \vskip-\skip0 + \fi + % + \dosubindwrite + % + \ifx\lastskipmacro\zeroskipmacro + % if \lastskip was zero, perhaps the last item was a + % penalty, and perhaps it was >=10000, e.g., a \nobreak. + % In that case, we want to re-insert the penalty; since we + % just inserted a non-discardable item, any following glue + % (such as a \parskip) would be a breakpoint. For example: + % @deffn deffn-whatever + % @vindex index-whatever + % Description. + % would allow a break between the index-whatever whatsit + % and the "Description." paragraph. + \ifnum\count255>9999 \nobreak \fi + \else + % On the other hand, if we had a nonzero \lastskip, + % this make-up glue would be preceded by a non-discardable item + % (the whatsit from the \write), so we must insert a \nobreak. + \nobreak\vskip\skip0 + \fi } % The index entry written in the file actually looks like @@ -2720,13 +3424,12 @@ width0pt\relax} \fi % @printindex causes a particular index (the ??s file) to get printed. % It does not print any chapter heading (usually an @unnumbered). % -\def\printindex{\parsearg\doprintindex} -\def\doprintindex#1{\begingroup +\parseargdef\printindex{\begingroup \dobreak \chapheadingskip{10000}% % - \indexfonts \rm + \smallfonts \rm \tolerance = 9500 - \indexbreaks + \everypar = {}% don't want the \kern\-parindent from indentation suppression. % % See if the index file exists and is nonempty. % Change catcode of @ here so that if the index file contains @@ -2753,7 +3456,7 @@ width0pt\relax} \fi % Index files are almost Texinfo source, but we use \ as the escape % character. It would be better to use @, but that's too big a change % to make right now. - \def\indexbackslash{\rawbackslashxx}% + \def\indexbackslash{\backslashcurfont}% \catcode`\\ = 0 \escapechar = `\\ \begindoublecolumns @@ -2791,70 +3494,95 @@ width0pt\relax} \fi \nobreak }} -% This typesets a paragraph consisting of #1, dot leaders, and then #2 -% flush to the right margin. It is used for index and table of contents -% entries. The paragraph is indented by \leftskip. +% \entry typesets a paragraph consisting of the text (#1), dot leaders, and +% then page number (#2) flushed to the right margin. It is used for index +% and table of contents entries. The paragraph is indented by \leftskip. % -\def\entry#1#2{\begingroup - % - % Start a new paragraph if necessary, so our assignments below can't - % affect previous text. - \par - % - % Do not fill out the last line with white space. - \parfillskip = 0in - % - % No extra space above this paragraph. - \parskip = 0in - % - % Do not prefer a separate line ending with a hyphen to fewer lines. - \finalhyphendemerits = 0 - % - % \hangindent is only relevant when the entry text and page number - % don't both fit on one line. In that case, bob suggests starting the - % dots pretty far over on the line. Unfortunately, a large - % indentation looks wrong when the entry text itself is broken across - % lines. So we use a small indentation and put up with long leaders. - % - % \hangafter is reset to 1 (which is the value we want) at the start - % of each paragraph, so we need not do anything with that. - \hangindent = 2em - % - % When the entry text needs to be broken, just fill out the first line - % with blank space. - \rightskip = 0pt plus1fil - % - % A bit of stretch before each entry for the benefit of balancing columns. - \vskip 0pt plus1pt - % - % Start a ``paragraph'' for the index entry so the line breaking - % parameters we've set above will have an effect. - \noindent - % - % Insert the text of the index entry. TeX will do line-breaking on it. - #1% - % The following is kludged to not output a line of dots in the index if - % there are no page numbers. The next person who breaks this will be - % cursed by a Unix daemon. - \def\tempa{{\rm }}% - \def\tempb{#2}% - \edef\tempc{\tempa}% - \edef\tempd{\tempb}% - \ifx\tempc\tempd\ \else% +% A straightforward implementation would start like this: +% \def\entry#1#2{... +% But this frozes the catcodes in the argument, and can cause problems to +% @code, which sets - active. This problem was fixed by a kludge--- +% ``-'' was active throughout whole index, but this isn't really right. +% +% The right solution is to prevent \entry from swallowing the whole text. +% --kasal, 21nov03 +\def\entry{% + \begingroup % - % If we must, put the page number on a line of its own, and fill out - % this line with blank space. (The \hfil is overwhelmed with the - % fill leaders glue in \indexdotfill if the page number does fit.) - \hfil\penalty50 - \null\nobreak\indexdotfill % Have leaders before the page number. + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par % - % The `\ ' here is removed by the implicit \unskip that TeX does as - % part of (the primitive) \par. Without it, a spurious underfull - % \hbox ensues. - \ #2% The page number ends the paragraph. - \fi% - \par -\endgroup} + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent = 2em + % + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus1pt + % + % Swallow the left brace of the text (first parameter): + \afterassignment\doentry + \let\temp = +} +\def\doentry{% + \bgroup % Instead of the swallowed brace. + \noindent + \aftergroup\finishentry + % And now comes the text of the entry. +} +\def\finishentry#1{% + % #1 is the page number. + % + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \def\tempa{{\rm }}% + \def\tempb{#1}% + \edef\tempc{\tempa}% + \edef\tempd{\tempb}% + \ifx\tempc\tempd + \ % + \else + % + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. + % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ifpdf + \pdfgettoks#1.% + \ \the\toksA + \else + \ #1% + \fi + \fi + \par + \endgroup +} % Like \dotfill except takes at least 1 em. \def\indexdotfill{\cleaders @@ -2863,11 +3591,18 @@ width0pt\relax} \fi \def\primary #1{\line{#1\hfil}} \newskip\secondaryindent \secondaryindent=0.5cm - -\def\secondary #1#2{ -{\parfillskip=0in \parskip=0in -\hangindent =1in \hangafter=1 -\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par +\def\secondary#1#2{{% + \parfillskip=0in + \parskip=0in + \hangindent=1in + \hangafter=1 + \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + #2 + \fi + \par }} % Define two-column mode, which we use to typeset indexes. @@ -2927,7 +3662,6 @@ width0pt\relax} \fi % % Double the \vsize as well. (We don't need a separate register here, % since nobody clobbers \vsize.) - \advance\vsize by -\ht\partialpage \vsize = 2\vsize } @@ -2941,6 +3675,7 @@ width0pt\relax} \fi % previous page. \dimen@ = \vsize \divide\dimen@ by 2 + \advance\dimen@ by -\ht\partialpage % % box0 will be the left-hand column, box2 the right. \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ @@ -2948,15 +3683,18 @@ width0pt\relax} \fi \unvbox255 \penalty\outputpenalty } +% +% Re-output the contents of the output page -- any previous material, +% followed by the two boxes we just split, in box0 and box2. \def\pagesofar{% - % Re-output the contents of the output page -- any previous material, - % followed by the two boxes we just split, in box0 and box2. \unvbox\partialpage % \hsize = \doublecolumnhsize \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}% } +% +% All done with double columns. \def\enddoublecolumns{% \output = {% % Split the last of the double-column material. Leave it on the @@ -2981,8 +3719,9 @@ width0pt\relax} \fi % \endgroup where \vsize got restored). \pagegoal = \vsize } +% +% Called at the end of the double column material. \def\balancecolumns{% - % Called at the end of the double column material. \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. \dimen@ = \ht0 \advance\dimen@ by \topskip @@ -3010,8 +3749,14 @@ width0pt\relax} \fi \message{sectioning,} -% Define chapters, sections, etc. - +% Chapters, sections, etc. + +% \unnumberedno is an oxymoron, of course. But we count the unnumbered +% sections so that we can refer to them unambiguously in the pdf +% outlines by their "section number". We avoid collisions with chapter +% numbers by starting them at 10000. (If a document ever has 10000 +% chapters, we're in trouble anyway, I'm sure.) +\newcount\unnumberedno \unnumberedno = 10000 \newcount\chapno \newcount\secno \secno=0 \newcount\subsecno \subsecno=0 @@ -3019,15 +3764,55 @@ width0pt\relax} \fi % This counter is funny since it counts through charcodes of letters A, B, ... \newcount\appendixno \appendixno = `\@ -\def\appendixletter{\char\the\appendixno} +% +% \def\appendixletter{\char\the\appendixno} +% We do the following ugly conditional instead of the above simple +% construct for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +% +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} % Each @chapter defines this as the name of the chapter. % page headings and footings can use it. @section does likewise. +% However, they are not reliable, because we don't use marks. \def\thischapter{} \def\thissection{} \newcount\absseclevel % used to calculate proper heading level -\newcount\secbase\secbase=0 % @raise/lowersections modify this count +\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count % @raisesections: treat @section as chapter, @subsection as section, etc. \def\raisesections{\global\advance\secbase by -1} @@ -3037,287 +3822,246 @@ width0pt\relax} \fi \def\lowersections{\global\advance\secbase by 1} \let\down=\lowersections % original BFox name -% Choose a numbered-heading macro -% #1 is heading level if unmodified by @raisesections or @lowersections -% #2 is text for heading -\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \chapterzzz{#2} -\or - \seczzz{#2} -\or - \numberedsubseczzz{#2} -\or - \numberedsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \chapterzzz{#2} +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achive this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unmlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 \else - \numberedsubsubseczzz{#2} + \ifnum \absseclevel > 3 + \absseclevel = 3 + \fi \fi -\fi -} - -% like \numhead, but chooses appendix heading levels -\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \appendixzzz{#2} -\or - \appendixsectionzzz{#2} -\or - \appendixsubseczzz{#2} -\or - \appendixsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \appendixzzz{#2} + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unmlevel + \chardef\unmlevel = \absseclevel + \fi \else - \appendixsubsubseczzz{#2} + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unmlevel + \def\headtype{U}% + \else + \chardef\unmlevel = 3 + \fi \fi -\fi -} - -% like \numhead, but chooses numberless heading levels -\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \unnumberedzzz{#2} -\or - \unnumberedseczzz{#2} -\or - \unnumberedsubseczzz{#2} -\or - \unnumberedsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \unnumberedzzz{#2} + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi \else - \unnumberedsubsubseczzz{#2} + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi + \fi \fi -\fi -} - -% @chapter, @appendix, @unnumbered. -\def\thischaptername{No Chapter Title} -\outer\def\chapter{\parsearg\chapteryyy} -\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz -\def\chapterzzz #1{% -\secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}% -\chapmacro {#1}{\the\chapno}% -\gdef\thissection{#1}% -\gdef\thischaptername{#1}% -% We don't substitute the actual chapter name into \thischapter -% because we don't want its macros evaluated now. -\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% - {\the\chapno}}}% -\temp -\donoderef -\global\let\section = \numberedsec -\global\let\subsection = \numberedsubsec -\global\let\subsubsection = \numberedsubsubsec -} - -\outer\def\appendix{\parsearg\appendixyyy} -\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz -\def\appendixzzz #1{% -\secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \appendixno by 1 -\message{\putwordAppendix\space \appendixletter}% -\chapmacro {#1}{\putwordAppendix{} \appendixletter}% -\gdef\thissection{#1}% -\gdef\thischaptername{#1}% -\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% - {\putwordAppendix{} \appendixletter}}}% -\temp -\appendixnoderef -\global\let\section = \appendixsec -\global\let\subsection = \appendixsubsec -\global\let\subsubsection = \appendixsubsubsec + \suppressfirstparagraphindent } -% @centerchap is like @unnumbered, but the heading is centered. -\outer\def\centerchap{\parsearg\centerchapyyy} -\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}} +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} -% @top is like @unnumbered. -\outer\def\top{\parsearg\unnumberedyyy} - -\outer\def\unnumbered{\parsearg\unnumberedyyy} -\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz -\def\unnumberedzzz #1{% -\secno=0 \subsecno=0 \subsubsecno=0 -% -% This used to be simply \message{#1}, but TeX fully expands the -% argument to \message. Therefore, if #1 contained @-commands, TeX -% expanded them. For example, in `@unnumbered The @cite{Book}', TeX -% expanded @cite (which turns out to cause errors because \cite is meant -% to be executed, not expanded). -% -% Anyway, we don't want the fully-expanded definition of @cite to appear -% as a result of the \message, we just want `@cite' itself. We use -% \the to achieve this: TeX expands \the only once, -% simply yielding the contents of . (We also do this for -% the toc entries.) -\toks0 = {#1}\message{(\the\toks0)}% -% -\unnumbchapmacro {#1}% -\gdef\thischapter{#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}% -\temp -\unnumbnoderef -\global\let\section = \unnumberedsec -\global\let\subsection = \unnumberedsubsec -\global\let\subsubsection = \unnumberedsubsubsec +% @chapter, @appendix, @unnumbered. Increment top-level counter, reset +% all lower-level sectioning counters to zero. +% +% Also set \chaplevelprefix, which we prepend to @float sequence numbers +% (e.g., figures), q.v. By default (before any chapter), that is empty. +\let\chaplevelprefix = \empty +% +\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz#1{% + % section resetting is \global in case the chapter is in a group, such + % as an @include file. + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\chapno by 1 + % + % Used for \float. + \gdef\chaplevelprefix{\the\chapno.}% + \resetallfloatnos + % + \message{\putwordChapter\space \the\chapno}% + % + % Write the actual heading. + \chapmacro{#1}{Ynumbered}{\the\chapno}% + % + % So @section and the like are numbered underneath this chapter. + \global\let\section = \numberedsec + \global\let\subsection = \numberedsubsec + \global\let\subsubsection = \numberedsubsubsec +} + +\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz +\def\appendixzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\appendixno by 1 + \gdef\chaplevelprefix{\appendixletter.}% + \resetallfloatnos + % + \def\appendixnum{\putwordAppendix\space \appendixletter}% + \message{\appendixnum}% + % + \chapmacro{#1}{Yappendix}{\appendixletter}% + % + \global\let\section = \appendixsec + \global\let\subsection = \appendixsubsec + \global\let\subsubsection = \appendixsubsubsec } -% Sections. -\outer\def\numberedsec{\parsearg\secyyy} -\def\secyyy #1{\numhead1{#1}} % normally calls seczzz -\def\seczzz #1{% -\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % -\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% - {\the\chapno}{\the\secno}}}% -\temp -\donoderef -\nobreak -} - -\outer\def\appendixsection{\parsearg\appendixsecyyy} -\outer\def\appendixsec{\parsearg\appendixsecyyy} -\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz -\def\appendixsectionzzz #1{% -\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % -\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% - {\appendixletter}{\the\secno}}}% -\temp -\appendixnoderef -\nobreak -} - -\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} -\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz -\def\unnumberedseczzz #1{% -\plainsecheading {#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}% -\temp -\unnumbnoderef -\nobreak -} +\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +\def\unnumberedzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\unnumberedno by 1 + % + % Since an unnumbered has no number, no prefix for figures. + \global\let\chaplevelprefix = \empty + \resetallfloatnos + % + % This used to be simply \message{#1}, but TeX fully expands the + % argument to \message. Therefore, if #1 contained @-commands, TeX + % expanded them. For example, in `@unnumbered The @cite{Book}', TeX + % expanded @cite (which turns out to cause errors because \cite is meant + % to be executed, not expanded). + % + % Anyway, we don't want the fully-expanded definition of @cite to appear + % as a result of the \message, we just want `@cite' itself. We use + % \the to achieve this: TeX expands \the only once, + % simply yielding the contents of . (We also do this for + % the toc entries.) + \toks0 = {#1}% + \message{(\the\toks0)}% + % + \chapmacro{#1}{Ynothing}{\the\unnumberedno}% + % + \global\let\section = \unnumberedsec + \global\let\subsection = \unnumberedsubsec + \global\let\subsubsection = \unnumberedsubsubsec +} + +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + % Well, we could do the following in a group, but that would break + % an assumption that \chapmacro is called at the outermost level. + % Thus we are safer this way: --kasal, 24feb04 + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + +% @top is like @unnumbered. +\let\top\unnumbered + +% Sections. +\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz +\def\seczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% +} + +\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +\def\appendixsectionzzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% +} +\let\appendixsec\appendixsection + +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +\def\unnumberedseczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% +} % Subsections. -\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} -\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz -\def\numberedsubseczzz #1{% -\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % -\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% - {\the\chapno}{\the\secno}{\the\subsecno}}}% -\temp -\donoderef -\nobreak -} - -\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} -\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz -\def\appendixsubseczzz #1{% -\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % -\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% - {\appendixletter}{\the\secno}{\the\subsecno}}}% -\temp -\appendixnoderef -\nobreak -} - -\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} -\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz -\def\unnumberedsubseczzz #1{% -\plainsubsecheading {#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry% - {\the\toks0}}}% -\temp -\unnumbnoderef -\nobreak +\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +\def\numberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% +} + +\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +\def\appendixsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno}% +} + +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +\def\unnumberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno}% } % Subsubsections. -\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} -\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz -\def\numberedsubsubseczzz #1{% -\gdef\thissection{#1}\global\advance \subsubsecno by 1 % -\subsubsecheading {#1} - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% -\temp -\donoderef -\nobreak -} - -\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} -\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz -\def\appendixsubsubseczzz #1{% -\gdef\thissection{#1}\global\advance \subsubsecno by 1 % -\subsubsecheading {#1} - {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% - {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% -\temp -\appendixnoderef -\nobreak -} - -\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} -\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz -\def\unnumberedsubsubseczzz #1{% -\plainsubsubsecheading {#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry% - {\the\toks0}}}% -\temp -\unnumbnoderef -\nobreak -} - -% These are variants which are not "outer", so they can appear in @ifinfo. -% Actually, they should now be obsolete; ordinary section commands should work. -\def\infotop{\parsearg\unnumberedzzz} -\def\infounnumbered{\parsearg\unnumberedzzz} -\def\infounnumberedsec{\parsearg\unnumberedseczzz} -\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} -\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} - -\def\infoappendix{\parsearg\appendixzzz} -\def\infoappendixsec{\parsearg\appendixseczzz} -\def\infoappendixsubsec{\parsearg\appendixsubseczzz} -\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} - -\def\infochapter{\parsearg\chapterzzz} -\def\infosection{\parsearg\sectionzzz} -\def\infosubsection{\parsearg\subsectionzzz} -\def\infosubsubsection{\parsearg\subsubsectionzzz} +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +\def\numberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynumbered}% + {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +\def\appendixsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +\def\unnumberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% +} % These macros control what the section commands do, according % to what kind of chapter we are in (ordinary, appendix, or unnumbered). % Define them by default for a numbered chapter. -\global\let\section = \numberedsec -\global\let\subsection = \numberedsubsec -\global\let\subsubsection = \numberedsubsubsec +\let\section = \numberedsec +\let\subsection = \numberedsubsec +\let\subsubsection = \numberedsubsubsec % Define @majorheading, @heading and @subheading @@ -3330,23 +4074,27 @@ width0pt\relax} \fi % if justification is not attempted. Hence \raggedright. -\def\majorheading{\parsearg\majorheadingzzz} -\def\majorheadingzzz #1{% -{\advance\chapheadingskip by 10pt \chapbreak }% -{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 200} +\def\majorheading{% + {\advance\chapheadingskip by 10pt \chapbreak }% + \parsearg\chapheadingzzz +} -\def\chapheading{\parsearg\chapheadingzzz} -\def\chapheadingzzz #1{\chapbreak % -{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 200} +\def\chapheading{\chapbreak \parsearg\chapheadingzzz} +\def\chapheadingzzz#1{% + {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}% + \bigskip \par\penalty 200\relax + \suppressfirstparagraphindent +} % @heading, @subheading, @subsubheading. -\def\heading{\parsearg\plainsecheading} -\def\subheading{\parsearg\plainsubsecheading} -\def\subsubheading{\parsearg\plainsubsubsecheading} +\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} % These macros generate a chapter, section, etc. heading only % (including whitespace, linebreaking, etc. around it), @@ -3355,8 +4103,6 @@ width0pt\relax} \fi %%% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} - %%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) @@ -3379,7 +4125,7 @@ width0pt\relax} \fi \global\let\pagealignmacro=\chappager \global\def\HEADINGSon{\HEADINGSsingle}} -\def\CHAPPAGodd{ +\def\CHAPPAGodd{% \global\let\contentsalignmacro = \chapoddpage \global\let\pchapsepmacro=\chapoddpage \global\let\pagealignmacro=\chapoddpage @@ -3387,260 +4133,394 @@ width0pt\relax} \fi \CHAPPAGon -\def\CHAPFplain{ -\global\let\chapmacro=\chfplain -\global\let\unnumbchapmacro=\unnchfplain -\global\let\centerchapmacro=\centerchfplain} - -% Plain chapter opening. -% #1 is the text, #2 the chapter number or empty if unnumbered. -\def\chfplain#1#2{% +% Chapter opening. +% +% #1 is the text, #2 is the section type (Ynumbered, Ynothing, +% Yappendix, Yomitfromtoc), #3 the chapter number. +% +% To test against our argument. +\def\Ynothingkeyword{Ynothing} +\def\Yomitfromtockeyword{Yomitfromtoc} +\def\Yappendixkeyword{Yappendix} +% +\def\chapmacro#1#2#3{% \pchapsepmacro {% \chapfonts \rm - \def\chapnum{#2}% - \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}% + % + % Have to define \thissection before calling \donoderef, because the + % xref code eventually uses it. On the other hand, it has to be called + % after \pchapsepmacro, or the headline will change too soon. + \gdef\thissection{#1}% + \gdef\thischaptername{#1}% + % + % Only insert the separating space if we have a chapter/appendix + % number, and don't print the unnumbered ``number''. + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unnchap}% + \def\thischapter{#1}% + \else\ifx\temptype\Yomitfromtockeyword + \setbox0 = \hbox{}% contents like unnumbered, but no toc entry + \def\toctype{omit}% + \xdef\thischapter{}% + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% + \def\toctype{app}% + % We don't substitute the actual chapter name into \thischapter + % because we don't want its macros evaluated now. And we don't + % use \thissection because that changes with each section. + % + \xdef\thischapter{\putwordAppendix{} \appendixletter: + \noexpand\thischaptername}% + \else + \setbox0 = \hbox{#3\enspace}% + \def\toctype{numchap}% + \xdef\thischapter{\putwordChapter{} \the\chapno: + \noexpand\thischaptername}% + \fi\fi\fi + % + % Write the toc entry for this chapter. Must come before the + % \donoderef, because we include the current node name in the toc + % entry, and \donoderef resets it to empty. + \writetocentry{\toctype}{#1}{#3}% + % + % For pdftex, we have to write out the node definition (aka, make + % the pdfdest) after any page break, but before the actual text has + % been typeset. If the destination for the pdf outline is after the + % text, then jumping from the outline may wind up with the text not + % being visible, for instance under high magnification. + \donoderef{#2}% + % + % Typeset the actual heading. \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent = \wd0 \centerparametersmaybe + \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title \nobreak } -% Plain opening for unnumbered. -\def\unnchfplain#1{\chfplain{#1}{}} - % @centerchap -- centered and unnumbered. \let\centerparametersmaybe = \relax -\def\centerchfplain#1{{% - \def\centerparametersmaybe{% - \advance\rightskip by 3\rightskip - \leftskip = \rightskip - \parfillskip = 0pt - }% - \chfplain{#1}{}% -}} +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} -\CHAPFplain % The default +% I don't think this chapter style is supported any more, so I'm not +% updating it with the new noderef stuff. We'll see. --karl, 11aug03. +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright \rm #1\hfill}}\bigskip \par\nobreak } - \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } - \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt \hfill {\rm #1}\hfill}}\bigskip \par\nobreak } - -\def\CHAPFopen{ -\global\let\chapmacro=\chfopen -\global\let\unnumbchapmacro=\unnchfopen -\global\let\centerchapmacro=\centerchfopen} +\def\CHAPFopen{% + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} -% Section titles. +% Section titles. These macros combine the section number parts and +% call the generic \sectionheading to do the printing. +% \newskip\secheadingskip -\def\secheadingbreak{\dobreak \secheadingskip {-1000}} -\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}} -\def\plainsecheading#1{\sectionheading{sec}{}{#1}} +\def\secheadingbreak{\dobreak \secheadingskip{-1000}} % Subsection titles. -\newskip \subsecheadingskip -\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} -\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}} -\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}} +\newskip\subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} % Subsubsection titles. -\let\subsubsecheadingskip = \subsecheadingskip -\let\subsubsecheadingbreak = \subsecheadingbreak -\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}} -\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}} +\def\subsubsecheadingskip{\subsecheadingskip} +\def\subsubsecheadingbreak{\subsecheadingbreak} -% Print any size section title. -% -% #1 is the section type (sec/subsec/subsubsec), #2 is the section -% number (maybe empty), #3 the text. -\def\sectionheading#1#2#3{% - {% - \expandafter\advance\csname #1headingskip\endcsname by \parskip - \csname #1headingbreak\endcsname - }% +% Print any size, any type, section title. +% +% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is +% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the +% section number. +% +\def\sectionheading#1#2#3#4{% {% % Switch to the right set of fonts. - \csname #1fonts\endcsname \rm + \csname #2fonts\endcsname \rm + % + % Insert space above the heading. + \csname #2headingbreak\endcsname + % + % Only insert the space after the number if we have a section number. + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unn}% + \gdef\thissection{#1}% + \else\ifx\temptype\Yomitfromtockeyword + % for @headings -- no section number, don't include in toc, + % and don't redefine \thissection. + \setbox0 = \hbox{}% + \def\toctype{omit}% + \let\sectionlevel=\empty + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{#4\enspace}% + \def\toctype{app}% + \gdef\thissection{#1}% + \else + \setbox0 = \hbox{#4\enspace}% + \def\toctype{num}% + \gdef\thissection{#1}% + \fi\fi\fi + % + % Write the toc entry (before \donoderef). See comments in \chfplain. + \writetocentry{\toctype\sectionlevel}{#1}{#4}% % - % Only insert the separating space if we have a section number. - \def\secnum{#2}% - \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}% + % Write the node reference (= pdf destination for pdftex). + % Again, see comments in \chfplain. + \donoderef{#3}% % + % Output the actual section heading. \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent = \wd0 % zero if no section number - \unhbox0 #3}% + \hangindent=\wd0 % zero if no section number + \unhbox0 #1}% }% - \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak + % Add extra space after the heading -- half of whatever came above it. + % Don't allow stretch, though. + \kern .5 \csname #2headingskip\endcsname + % + % Do not let the kern be a potential breakpoint, as it would be if it + % was followed by glue. + \nobreak + % + % We'll almost certainly start a paragraph next, so don't let that + % glue accumulate. (Not a breakpoint because it's preceded by a + % discardable item.) + \vskip-\parskip + % + % This \nobreak is purely so the last item on the list is a \penalty + % of 10000. This is so other code, for instance \parsebodycommon, can + % check for and avoid allowing breakpoints. Otherwise, it would + % insert a valid breakpoint between: + % @section sec-whatever + % @deffn def-whatever + \nobreak } \message{toc,} +% Table of contents. \newwrite\tocfile % Write an entry to the toc file, opening it if necessary. -% Called from @chapter, etc. We supply {\folio} at the end of the -% argument, which will end up as the last argument to the \...entry macro. -% -% We open the .toc file here instead of at @setfilename or any other -% given time so that @contents can be put in the document anywhere. +% Called from @chapter, etc. +% +% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} +% We append the current node name (if any) and page number as additional +% arguments for the \{chap,sec,...}entry macros which will eventually +% read this. The node name is used in the pdf outlines as the +% destination to jump to. +% +% We open the .toc file for writing here instead of at @setfilename (or +% any other fixed time) so that @contents can be anywhere in the document. +% But if #1 is `omit', then we don't do anything. This is used for the +% table of contents chapter openings themselves. % \newif\iftocfileopened -\def\writetocentry#1{% - \iftocfileopened\else - \immediate\openout\tocfile = \jobname.toc - \global\tocfileopenedtrue +\def\omitkeyword{omit}% +% +\def\writetocentry#1#2#3{% + \edef\writetoctype{#1}% + \ifx\writetoctype\omitkeyword \else + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + % + \iflinks + \toks0 = {#2}% + \toks2 = \expandafter{\lastnode}% + \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}% + {\the\toks2}{\noexpand\folio}}}% + \temp + \fi \fi - \iflinks \write\tocfile{#1{\folio}}\fi + % + % Tell \shipout to create a pdf destination on each page, if we're + % writing pdf. These are used in the table of contents. We can't + % just write one on every page because the title pages are numbered + % 1 and 2 (the page numbers aren't printed), and so are the first + % two pages of the document. Thus, we'd have two destinations named + % `1', and two named `2'. + \ifpdf \global\pdfmakepagedesttrue \fi } \newskip\contentsrightmargin \contentsrightmargin=1in \newcount\savepageno \newcount\lastnegativepageno \lastnegativepageno = -1 -% Finish up the main text and prepare to read what we've written -% to \tocfile. +% Prepare to read what we've written to \tocfile. % \def\startcontents#1{% - % If @setchapternewpage on, and @headings double, the contents should - % start on an odd page, unlike chapters. Thus, we maintain - % \contentsalignmacro in parallel with \pagealignmacro. - % From: Torbjorn Granlund - \contentsalignmacro - \immediate\closeout\tocfile - % - % Don't need to put `Contents' or `Short Contents' in the headline. - % It is abundantly clear what they are. - \unnumbchapmacro{#1}\def\thischapter{}% - \savepageno = \pageno - \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -\contentsrightmargin % Don't use the full line length. - % - % Roman numerals for page numbers. - \ifnum \pageno>0 \pageno = \lastnegativepageno \fi + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \def\thischapter{}% + \chapmacro{#1}{Yomitfromtoc}{}% + % + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 + % We can't do this, because then an actual ^ in a section + % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. + %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi } % Normal (long) toc. \def\contents{% - \startcontents{\putwordTOC}% - \openin 1 \jobname.toc - \ifeof 1 \else - \closein 1 - \input \jobname.toc - \fi - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \endgroup - \lastnegativepageno = \pageno - \pageno = \savepageno + \startcontents{\putwordTOC}% + \openin 1 \jobname.toc + \ifeof 1 \else + \input \jobname.toc + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \ifeof 1 \else + \pdfmakeoutlines + \fi + \closein 1 + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno } % And just the chapters. \def\summarycontents{% - \startcontents{\putwordShortTOC}% - % - \let\chapentry = \shortchapentry - \let\unnumbchapentry = \shortunnumberedentry - % We want a true roman here for the page numbers. - \secfonts - \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl - \rm - \hyphenpenalty = 10000 - \advance\baselineskip by 1pt % Open it up a little. - \def\secentry ##1##2##3##4{} - \def\unnumbsecentry ##1##2{} - \def\subsecentry ##1##2##3##4##5{} - \def\unnumbsubsecentry ##1##2{} - \def\subsubsecentry ##1##2##3##4##5##6{} - \def\unnumbsubsubsecentry ##1##2{} - \openin 1 \jobname.toc - \ifeof 1 \else - \closein 1 - \input \jobname.toc - \fi - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \endgroup - \lastnegativepageno = \pageno - \pageno = \savepageno + \startcontents{\putwordShortTOC}% + % + \let\numchapentry = \shortchapentry + \let\appentry = \shortchapentry + \let\unnchapentry = \shortunnchapentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\numsecentry##1##2##3##4{} + \let\appsecentry = \numsecentry + \let\unnsecentry = \numsecentry + \let\numsubsecentry = \numsecentry + \let\appsubsecentry = \numsecentry + \let\unnsubsecentry = \numsecentry + \let\numsubsubsecentry = \numsecentry + \let\appsubsubsecentry = \numsecentry + \let\unnsubsubsecentry = \numsecentry + \openin 1 \jobname.toc + \ifeof 1 \else + \input \jobname.toc + \fi + \closein 1 + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno } \let\shortcontents = \summarycontents +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `A' for an appendix, or `3' for a chapter. +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + % + % We'd like to right-justify chapter numbers, but that looks strange + % with appendix letters. And right-justifying numbers and + % left-justifying letters looks strange when there is less than 10 + % chapters. Have to read the whole toc once to know how many chapters + % there are before deciding ... + \hbox to 1em{#1\hss}% +} + % These macros generate individual entries in the table of contents. % The first argument is the chapter or section name. % The last argument is the page number. % The arguments in between are the chapter number, section number, ... -% Chapter-level things, for both the long and short contents. -\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} - -% See comments in \dochapentry re vbox and related settings -\def\shortchapentry#1#2#3{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}% +% Chapters, in the main contents. +\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} +% +% Chapters, in the short toc. +% See comments in \dochapentry re vbox and related settings. +\def\shortchapentry#1#2#3#4{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% } -% Typeset the label for a chapter or appendix for the short contents. -% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter. -% We could simplify the code here by writing out an \appendixentry -% command in the toc file for appendices, instead of using \chapentry -% for both, but it doesn't seem worth it. -\setbox0 = \hbox{\shortcontrm \putwordAppendix } -\newdimen\shortappendixwidth \shortappendixwidth = \wd0 - -\def\shortchaplabel#1{% - % We typeset #1 in a box of constant width, regardless of the text of - % #1, so the chapter titles will come out aligned. - \setbox0 = \hbox{#1}% - \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi - % - % This space should be plenty, since a single number is .5em, and the - % widest letter (M) is 1em, at least in the Computer Modern fonts. - % (This space doesn't include the extra space that gets added after - % the label; that gets put in by \shortchapentry above.) - \advance\dimen0 by 1.1em - \hbox to \dimen0{#1\hfil}% -} +% Appendices, in the main contents. +% Need the word Appendix, and a fixed-size box. +% +\def\appendixbox#1{% + % We use M since it's probably the widest letter. + \setbox0 = \hbox{\putwordAppendix{} M}% + \hbox to \wd0{\putwordAppendix{} #1\hss}} +% +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} -\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} -\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}} +% Unnumbered chapters. +\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} % Sections. -\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} -\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}} +\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} +\let\appsecentry=\numsecentry +\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} % Subsections. -\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} -\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}} +\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} +\let\appsubsecentry=\numsubsecentry +\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} % And subsubsections. -\def\subsubsecentry#1#2#3#4#5#6{% - \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} -\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}} +\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} +\let\appsubsubsecentry=\numsubsubsecentry +\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} % This parameter controls the indentation of the various levels. -\newdimen\tocindent \tocindent = 3pc +% Same as \defaultparindent. +\newdimen\tocindent \tocindent = 15pt % Now for the actual typesetting. In all these, #1 is the text and #2 is the % page number. @@ -3651,37 +4531,28 @@ width0pt\relax} \fi \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip \begingroup \chapentryfonts - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup \nobreak\vskip .25\baselineskip plus.1\baselineskip } \def\dosecentry#1#2{\begingroup \secentryfonts \leftskip=\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsecentry#1#2{\begingroup \subsecentryfonts \leftskip=2\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsubsecentry#1#2{\begingroup \subsubsecentryfonts \leftskip=3\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} -% Final typesetting of a toc entry; we use the same \entry macro as for -% the index entries, but we want to suppress hyphenation here. (We -% can't do that in the \entry macro, since index entries might consist -% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) -\def\tocentry#1#2{\begingroup - \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks - % Do not use \turnoffactive in these arguments. Since the toc is - % typeset in cmr, so characters such as _ would come out wrong; we - % have to do the usual translation tricks. - \entry{#1}{#2}% -\endgroup} +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry % Space between chapter (or whatever) number and the title. \def\labelspace{\hskip1em \relax} @@ -3691,71 +4562,61 @@ width0pt\relax} \fi \def\chapentryfonts{\secfonts \rm} \def\secentryfonts{\textfonts} -\let\subsecentryfonts = \textfonts -\let\subsubsecentryfonts = \textfonts +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} \message{environments,} +% @foo ... @end foo. +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% % Since these characters are used in examples, it should be an even number of % \tt widths. Each \tt character is 1en, so two makes it 1em. -% Furthermore, these definitions must come after we define our fonts. -\newbox\dblarrowbox \newbox\longdblarrowbox -\newbox\pushcharbox \newbox\bullbox -\newbox\equivbox \newbox\errorbox - -%{\tentt -%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil} -%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil} -%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil} -%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil} -% Adapted from the manmac format (p.420 of TeXbook) -%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex -% depth .1ex\hfil} -%} - -% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% \def\point{$\star$} \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} +% The @error{} command. % Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% {\tentt \global\dimen0 = 3em}% Width of the box. \dimen2 = .55pt % Thickness of rules % The text. (`r' is open on the right, `e' somewhat less so on the left.) \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} - -\global\setbox\errorbox=\hbox to \dimen0{\hfil +% +\setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. \advance\hsize by -2\dimen2 % Rules. - \vbox{ + \vbox{% \hrule height\dimen2 \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. \kern3pt\vrule width\dimen2}% Space to right. \hrule height\dimen2} \hfil} - -% The @error{} command. +% \def\error{\leavevmode\lower.7ex\copy\errorbox} % @tex ... @end tex escapes into raw Tex temporarily. % One exception: @ is still an escape character, so that @end tex works. % But \@ or @@ will get a plain tex @ character. -\def\tex{\begingroup +\envdef\tex{% \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 - \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie + \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie \catcode `\%=14 - \catcode 43=12 % plus - \catcode`\"=12 - \catcode`\==12 - \catcode`\|=12 - \catcode`\<=12 - \catcode`\>=12 + \catcode `\+=\other + \catcode `\"=\other + \catcode `\|=\other + \catcode `\<=\other + \catcode `\>=\other \escapechar=`\\ % \let\b=\ptexb @@ -3767,20 +4628,24 @@ width0pt\relax} \fi \let\equiv=\ptexequiv \let\!=\ptexexclam \let\i=\ptexi + \let\indent=\ptexindent + \let\noindent=\ptexnoindent \let\{=\ptexlbrace \let\+=\tabalign \let\}=\ptexrbrace + \let\/=\ptexslash \let\*=\ptexstar \let\t=\ptext % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% \def\@{@}% -\let\Etex=\endgroup} +} +% There is no need to define \Etex. -% Define @lisp ... @endlisp. -% @lisp does a \begingroup so it can rebind things, -% including the definition of @endlisp (which normally is erroneous). +% Define @lisp ... @end lisp. +% @lisp environment forms a group so it can rebind things, +% including the definition of @end lisp (which normally is erroneous). % Amount to narrow the margins by for @lisp. \newskip\lispnarrowing \lispnarrowing=0.4in @@ -3790,30 +4655,28 @@ width0pt\relax} \fi % have any width. \def\lisppar{\null\endgraf} -% Make each space character in the input produce a normal interword -% space in the output. Don't allow a line break at this space, as this -% is used only in environments like @example, where each line of input -% should produce a line of output anyway. -% -{\obeyspaces % -\gdef\sepspaces{\obeyspaces\let =\tie}} - -% Define \obeyedspace to be our active space, whatever it is. This is -% for use in \parsearg. -{\sepspaces% -\global\let\obeyedspace= } - % This space is always present above and below environments. \newskip\envskipamount \envskipamount = 0pt % Make spacing and below environment symmetrical. We use \parskip here % to help in doing that, since in @example-like environments \parskip % is reset to zero; thus the \afterenvbreak inserts no space -- but the -% start of the next paragraph will insert \parskip -% -\def\aboveenvbreak{{\advance\envskipamount by \parskip -\endgraf \ifdim\lastskip<\envskipamount -\removelastskip \penalty-50 \vskip\envskipamount \fi}} +% start of the next paragraph will insert \parskip. +% +\def\aboveenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + % it's not a good place to break if the last penalty was \nobreak + % or better ... + \ifnum\lastpenalty<10000 \penalty-50 \fi + \vskip\envskipamount + \fi + \fi +}} \let\afterenvbreak = \aboveenvbreak @@ -3841,54 +4704,54 @@ width0pt\relax} \fi % \newskip\lskip\newskip\rskip -\long\def\cartouche{% -\begingroup - \lskip=\leftskip \rskip=\rightskip - \leftskip=0pt\rightskip=0pt %we want these *outside*. - \cartinner=\hsize \advance\cartinner by-\lskip - \advance\cartinner by-\rskip - \cartouter=\hsize - \advance\cartouter by 18.4pt % allow for 3pt kerns on either -% side, and for 6pt waste from -% each corner char, and rule thickness - \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment - \vbox\bgroup - \baselineskip=0pt\parskip=0pt\lineskip=0pt - \carttop - \hbox\bgroup - \hskip\lskip - \vrule\kern3pt - \vbox\bgroup - \hsize=\cartinner - \kern3pt - \begingroup - \baselineskip=\normbskip - \lineskip=\normlskip - \parskip=\normpskip - \vskip -\parskip +\envdef\cartouche{% + \ifhmode\par\fi % can't be in the midst of a paragraph. + \startsavinginserts + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt % we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either + % side, and for 6pt waste from + % each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing=\comment + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \kern3pt + \hsize=\cartinner + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip + \comment % For explanation, see the end of \def\group. +} \def\Ecartouche{% - \endgroup - \kern3pt - \egroup - \kern3pt\vrule - \hskip\rskip - \egroup - \cartbot - \egroup -\endgroup -}} + \ifhmode\par\fi + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup + \checkinserts +} % This macro is called at the beginning of all the @example variants, % inside a group. \def\nonfillstart{% \aboveenvbreak - \inENV % This group ends at the end of the body \hfuzz = 12pt % Don't be fussy \sepspaces % Make spaces be word-separators rather than space tokens. - \singlespace \let\par = \lisppar % don't ignore blank lines \obeylines % each line of input is a line of output \parskip = 0pt @@ -3899,114 +4762,99 @@ width0pt\relax} \fi \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing \exdentamount=\lispnarrowing - \let\exdent=\nofillexdent - \let\nonarrowing=\relax \fi + \let\exdent=\nofillexdent } -% Define the \E... control sequence only if we are inside the particular -% environment, so the error checking in \end will work. -% -% To end an @example-like environment, we first end the paragraph (via -% \afterenvbreak's vertical glue), and then the group. That way we keep -% the zero \parskip that the environments set -- \parskip glue will be -% inserted at the beginning of the next paragraph in the document, after -% the environment. +% If you want all examples etc. small: @set dispenvsize small. +% If you want even small examples the full size: @set dispenvsize nosmall. +% This affects the following displayed environments: +% @example, @display, @format, @lisp % -\def\nonfillfinish{\afterenvbreak\endgroup} +\def\smallword{small} +\def\nosmallword{nosmall} +\let\SETdispenvsize\relax +\def\setnormaldispenv{% + \ifx\SETdispenvsize\smallword + \smallexamplefonts \rm + \fi +} +\def\setsmalldispenv{% + \ifx\SETdispenvsize\nosmallword + \else + \smallexamplefonts \rm + \fi +} -% @lisp: indented, narrowed, typewriter font. -\def\lisp{\begingroup - \nonfillstart - \let\Elisp = \nonfillfinish - \tt - \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return +% We often define two environments, @foo and @smallfoo. +% Let's do it by one command: +\def\makedispenv #1#2{ + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} + \expandafter\let\csname E#1\endcsname \afterenvbreak + \expandafter\let\csname Esmall#1\endcsname \afterenvbreak } -% @example: Same as @lisp. -\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} +% Define two synonyms: +\def\maketwodispenvs #1#2#3{ + \makedispenv{#1}{#3} + \makedispenv{#2}{#3} +} -% @small... is usually equivalent to the non-small (@smallbook -% redefines). We must call \example (or whatever) last in the -% definition, since it reads the return following the @example (or -% whatever) command. -% -% This actually allows (for example) @end display inside an -% @smalldisplay. Too bad, but makeinfo will catch the error anyway. +% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. % -\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display} -\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp} -\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format} -\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp} - -% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts. +% @smallexample and @smalllisp: use smaller fonts. % Originally contributed by Pavel@xerox. -\def\smalllispx{\begingroup - \def\Esmalllisp{\nonfillfinish\endgroup}% - \def\Esmallexample{\nonfillfinish\endgroup}% - \indexfonts - \lisp -} - -% @display: same as @lisp except keep current font. % -\def\display{\begingroup +\maketwodispenvs {lisp}{example}{% \nonfillstart - \let\Edisplay = \nonfillfinish - \gobble + \tt + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return } -% @smalldisplay (when @smallbook): @display plus smaller fonts. +% @display/@smalldisplay: same as @lisp except keep current font. % -\def\smalldisplayx{\begingroup - \def\Esmalldisplay{\nonfillfinish\endgroup}% - \indexfonts \rm - \display +\makedispenv {display}{% + \nonfillstart + \gobble } -% @format: same as @display except don't narrow margins. +% @format/@smallformat: same as @display except don't narrow margins. % -\def\format{\begingroup - \let\nonarrowing = t +\makedispenv{format}{% + \let\nonarrowing = t% \nonfillstart - \let\Eformat = \nonfillfinish \gobble } -% @smallformat (when @smallbook): @format plus smaller fonts. -% -\def\smallformatx{\begingroup - \def\Esmallformat{\nonfillfinish\endgroup}% - \indexfonts \rm - \format +% @flushleft: same as @format, but doesn't obey \SETdispenvsize. +\envdef\flushleft{% + \let\nonarrowing = t% + \nonfillstart + \gobble } - -% @flushleft (same as @format). -% -\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format} +\let\Eflushleft = \afterenvbreak % @flushright. % -\def\flushright{\begingroup - \let\nonarrowing = t +\envdef\flushright{% + \let\nonarrowing = t% \nonfillstart - \let\Eflushright = \nonfillfinish \advance\leftskip by 0pt plus 1fill \gobble } +\let\Eflushright = \afterenvbreak + % @quotation does normal linebreaking (hence we can't use \nonfillstart) -% and narrows the margins. +% and narrows the margins. We keep \parskip nonzero in general, since +% we're doing normal filling. So, when using \aboveenvbreak and +% \afterenvbreak, temporarily make \parskip 0. % -\def\quotation{% - \begingroup\inENV %This group ends at the end of the @quotation body +\envdef\quotation{% {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \singlespace \parindent=0pt - % We have retained a nonzero parskip for the environment, since we're - % doing normal filling. So to avoid extra space below the environment... - \def\Equotation{\parskip = 0pt \nonfillfinish}% % % @cartouche defines \nonarrowing to inhibit narrowing at next level down. \ifx\nonarrowing\relax @@ -4015,521 +4863,568 @@ width0pt\relax} \fi \exdentamount = \lispnarrowing \let\nonarrowing = \relax \fi + \parsearg\quotationlabel } +% We have retained a nonzero parskip for the environment, since we're +% doing normal filling. +% +\def\Equotation{% + \par + \ifx\quotationauthor\undefined\else + % indent a bit. + \leftline{\kern 2\leftskip \sl ---\quotationauthor}% + \fi + {\parskip=0pt \afterenvbreak}% +} -\message{defuns,} -% Define formatter for defuns -% First, allow user to change definition object font (\df) internally -\def\setdeffont #1 {\csname DEF#1\endcsname} - -\newskip\defbodyindent \defbodyindent=.4in -\newskip\defargsindent \defargsindent=50pt -\newskip\deftypemargin \deftypemargin=12pt -\newskip\deflastargmargin \deflastargmargin=18pt - -\newcount\parencount -% define \functionparens, which makes ( and ) and & do special things. -% \functionparens affects the group it is contained in. -\def\activeparens{% -\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active -\catcode`\[=\active \catcode`\]=\active} - -% Make control sequences which act like normal parenthesis chars. -\let\lparen = ( \let\rparen = ) +% If we're given an argument, typeset it in bold with a colon after. +\def\quotationlabel#1{% + \def\temp{#1}% + \ifx\temp\empty \else + {\bf #1: }% + \fi +} -{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) -% Be sure that we always have a definition for `(', etc. For example, -% if the fn name has parens in it, \boldbrax will not be in effect yet, -% so TeX would otherwise complain about undefined control sequence. -\global\let(=\lparen \global\let)=\rparen -\global\let[=\lbrack \global\let]=\rbrack - -\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } -\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} -% This is used to turn on special parens -% but make & act ordinary (given that it's active). -\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr} - -% Definitions of (, ) and & used in args for functions. -% This is the definition of ( outside of all parentheses. -\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested - \global\advance\parencount by 1 -} +% LaTeX-like @verbatim...@end verbatim and @verb{...} +% If we want to allow any as delimiter, +% we need the curly braces so that makeinfo sees the @verb command, eg: +% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org % -% This is the definition of ( when already inside a level of parens. -\gdef\opnested{\char`\(\global\advance\parencount by 1 } +% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. % -\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. - % also in that case restore the outer-level definition of (. - \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi - \global\advance \parencount by -1 } -% If we encounter &foo, then turn on ()-hacking afterwards -\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } -% -\gdef\normalparens{\boldbrax\let&=\ampnr} -} % End of definition inside \activeparens -%% These parens (in \boldbrax) actually are a little bolder than the -%% contained text. This is especially needed for [ and ] -\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } -\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } -\def\ampnr{\&} -\def\lbrb{{\bf\char`\[}} -\def\rbrb{{\bf\char`\]}} - -% First, defname, which formats the header line itself. -% #1 should be the function name. -% #2 should be the type of definition, such as "Function". - -\def\defname #1#2{% -% Get the values of \leftskip and \rightskip as they were -% outside the @def... -\dimen2=\leftskip -\advance\dimen2 by -\defbodyindent -\noindent -\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% -\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line -\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations -\parshape 2 0in \dimen0 \defargsindent \dimen1 -% Now output arg 2 ("Function" or some such) -% ending at \deftypemargin from the right margin, -% but stuck inside a box of width 0 so it does not interfere with linebreaking -{% Adjust \hsize to exclude the ambient margins, -% so that \rightline will obey them. -\advance \hsize by -\dimen2 -\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}% -% Make all lines underfull and no complaints: -\tolerance=10000 \hbadness=10000 -\advance\leftskip by -\defbodyindent -\exdentamount=\defbodyindent -{\df #1}\enskip % Generate function name -} - -% Actually process the body of a definition -% #1 should be the terminating control sequence, such as \Edefun. -% #2 should be the "another name" control sequence, such as \defunx. -% #3 should be the control sequence that actually processes the header, -% such as \defunheader. - -\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % 61 is `=' -\obeylines\activeparens\spacesplit#3} - -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. -% #4, delimited by the space, is the class name. -% -\def\defmethparsebody#1#2#3#4 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} - -% @deftypemethod has an extra argument that nothing else does. Sigh. -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. -% #4, delimited by the space, is the class name. -% #5 is the method's return type. -% -\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} - -\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} - -% These parsing functions are similar to the preceding ones -% except that they do not make parens into active characters. -% These are used for "variables" since they have no arguments. - -\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % -\obeylines\spacesplit#3} - -% This is used for \def{tp,vr}parsebody. It could probably be used for -% some of the others, too, with some judicious conditionals. -% -\def\parsebodycommon#1#2#3{% - \begingroup\inENV % - \medbreak % - % Define the end token that this defining construct specifies - % so that it will exit this group. - \def#1{\endgraf\endgroup\medbreak}% - \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent - \begingroup\obeylines -} - -\def\defvrparsebody#1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \spacesplit{#3{#4}}% +% [Knuth] p.344; only we need to do the other characters Texinfo sets +% active too. Otherwise, they get lost as the first character on a +% verbatim line. +\def\dospecials{% + \do\ \do\\\do\{\do\}\do\$\do\&% + \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% + \do\<\do\>\do\|\do\@\do+\do\"% } - -% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the -% type is just `struct', because we lose the braces in `{struct -% termios}' when \spacesplit reads its undelimited argument. Sigh. -% \let\deftpparsebody=\defvrparsebody % -% So, to get around this, we put \empty in with the type name. That -% way, TeX won't find exactly `{...}' as an undelimited argument, and -% won't strip off the braces. +% [Knuth] p. 380 +\def\uncatcodespecials{% + \def\do##1{\catcode`##1=\other}\dospecials} % -\def\deftpparsebody #1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \spacesplit{\parsetpheaderline{#3{#4}}}\empty -} - -% Fine, but then we have to eventually remove the \empty *and* the -% braces (if any). That's what this does. +% [Knuth] pp. 380,381,391 +% Disable Spanish ligatures ?` and !` of \tt font +\begingroup + \catcode`\`=\active\gdef`{\relax\lq} +\endgroup % -\def\removeemptybraces\empty#1\relax{#1} - -% After \spacesplit has done its work, this is called -- #1 is the final -% thing to call, #2 the type name (which starts with \empty), and #3 -% (which might be empty) the arguments. +% Setup for the @verb command. % -\def\parsetpheaderline#1#2#3{% - #1{\removeemptybraces#2\relax}{#3}% -}% - -\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\spacesplit{#3{#5}}} - -% Split up #2 at the first space token. -% call #1 with two arguments: -% the first is all of #2 before the space token, -% the second is all of #2 after that space token. -% If #2 contains no space token, all of it is passed as the first arg -% and the second is passed as empty. - -{\obeylines -\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% -\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% -\ifx\relax #3% -#1{#2}{}\else #1{#2}{#3#4}\fi}} - -% So much for the things common to all kinds of definitions. - -% Define @defun. - -% First, define the processing that is wanted for arguments of \defun -% Use this to expand the args and terminate the paragraph they make up - -\def\defunargs #1{\functionparens \sl -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -\hyphenchar\tensl=0 -#1% -\hyphenchar\tensl=45 -\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% -\interlinepenalty=10000 -\advance\rightskip by 0pt plus 1fil -\endgraf\nobreak\vskip -\parskip\nobreak +% Eight spaces for a tab +\begingroup + \catcode`\^^I=\active + \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} +\endgroup +% +\def\setupverb{% + \tt % easiest (and conventionally used) font for verbatim + \def\par{\leavevmode\endgraf}% + \catcode`\`=\active + \tabeightspaces + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces } -\def\deftypefunargs #1{% -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -% Use \boldbraxnoamp, not \functionparens, so that & is not special. -\boldbraxnoamp -\tclose{#1}% avoid \code because of side effects on active chars -\interlinepenalty=10000 -\advance\rightskip by 0pt plus 1fil -\endgraf\nobreak\vskip -\parskip\nobreak +% Setup for the @verbatim environment +% +% Real tab expansion +\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount +% +\def\starttabbox{\setbox0=\hbox\bgroup} +\begingroup + \catcode`\^^I=\active + \gdef\tabexpand{% + \catcode`\^^I=\active + \def^^I{\leavevmode\egroup + \dimen0=\wd0 % the width so far, or since the previous tab + \divide\dimen0 by\tabw + \multiply\dimen0 by\tabw % compute previous multiple of \tabw + \advance\dimen0 by\tabw % advance to next multiple of \tabw + \wd0=\dimen0 \box0 \starttabbox + }% + } +\endgroup +\def\setupverbatim{% + \nonfillstart + \advance\leftskip by -\defbodyindent + % Easiest (and conventionally used) font for verbatim + \tt + \def\par{\leavevmode\egroup\box0\endgraf}% + \catcode`\`=\active + \tabexpand + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces + \everypar{\starttabbox}% } -% Do complete processing of one @defun or @defunx line already parsed. - -% @deffn Command forward-char nchars - -\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} - -\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% -\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody +% Do the @verb magic: verbatim text is quoted by unique +% delimiter characters. Before first delimiter expect a +% right brace, after last delimiter expect closing brace: +% +% \def\doverb'{'#1'}'{#1} +% +% [Knuth] p. 382; only eat outer {} +\begingroup + \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other + \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] +\endgroup +% +\def\verb{\begingroup\setupverb\doverb} +% +% +% Do the @verbatim magic: define the macro \doverbatim so that +% the (first) argument ends when '@end verbatim' is reached, ie: +% +% \def\doverbatim#1@end verbatim{#1} +% +% For Texinfo it's a lot easier than for LaTeX, +% because texinfo's \verbatim doesn't stop at '\end{verbatim}': +% we need not redefine '\', '{' and '}'. +% +% Inspired by LaTeX's verbatim command set [latex.ltx] +% +\begingroup + \catcode`\ =\active + \obeylines % + % ignore everything up to the first ^^M, that's the newline at the end + % of the @verbatim input line itself. Otherwise we get an extra blank + % line in the output. + \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + % We really want {...\end verbatim} in the body of the macro, but + % without the active space; thus we have to use \xdef and \gobble. +\endgroup +% +\envdef\verbatim{% + \setupverbatim\doverbatim } +\let\Everbatim = \afterenvbreak -% @defun == @deffn Function - -\def\defun{\defparsebody\Edefun\defunx\defunheader} -\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{\putwordDeffunc}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody +% @verbatiminclude FILE - insert text of file in verbatim environment. +% +\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} +% +\def\doverbatiminclude#1{% + {% + \makevalueexpandable + \setupverbatim + \input #1 + \afterenvbreak + }% } -% @deftypefun int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} - -% #1 is the data type. #2 is the name and args. -\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} -% #1 is the data type, #2 the name, #3 the args. -\def\deftypefunheaderx #1#2 #3\relax{% -\doind {fn}{\code{#2}}% Make entry in function index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}% -\deftypefunargs {#3}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody +% @copying ... @end copying. +% Save the text away for @insertcopying later. Many commands won't be +% allowed in this context, but that's ok. +% +% We save the uninterpreted tokens, rather than creating a box. +% Saving the text in a box would be much easier, but then all the +% typesetting commands (@smallbook, font changes, etc.) have to be done +% beforehand -- and a) we want @copying to be done first in the source +% file; b) letting users define the frontmatter in as flexible order as +% possible is very desirable. +% +\def\copying{\begingroup + % Define a command to swallow text until we reach `@end copying'. + % \ is the escape char in this texinfo.tex file, so it is the + % delimiter for the command; @ will be the escape char when we read + % it, but that doesn't matter. + \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}% + % + % We must preserve ^^M's in the input file; see \insertcopying below. + \catcode`\^^M = \active + \docopying +} + +% What we do to finish off the copying text. +% +\def\enddocopying{\endgroup\ignorespaces} + +% @insertcopying. Here we must play games with ^^M's. On the one hand, +% we need them to delimit commands such as `@end quotation', so they +% must be active. On the other hand, we certainly don't want every +% end-of-line to be a \par, as would happen with the normal active +% definition of ^^M. On the third hand, two ^^M's in a row should still +% generate a \par. +% +% Our approach is to make ^^M insert a space and a penalty1 normally; +% then it can also check if \lastpenalty=1. If it does, then manually +% do \par. +% +% This messes up the normal definitions of @c[omment], so we redefine +% it. Similarly for @ignore. (These commands are used in the gcc +% manual for man page generation.) +% +% Seems pretty fragile, most line-oriented commands will presumably +% fail, but for the limited use of getting the copying text (which +% should be quite simple) inserted, we can hope it's ok. +% +{\catcode`\^^M=\active % +\gdef\insertcopying{\begingroup % + \parindent = 0pt % looks wrong on title page + \def^^M{% + \ifnum \lastpenalty=1 % + \par % + \else % + \space \penalty 1 % + \fi % + }% + % + % Fix @c[omment] for catcode 13 ^^M's. + \def\c##1^^M{\ignorespaces}% + \let\comment = \c % + % + % Don't bother jumping through all the hoops that \doignore does, it + % would be very hard since the catcodes are already set. + \long\def\ignore##1\end ignore{\ignorespaces}% + % + \copyingtext % +\endgroup}% } -% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} +\message{defuns,} +% @defun etc. -% \defheaderxcond#1\relax$$$ -% puts #1 in @code, followed by a space, but does nothing if #1 is null. -\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi} +\newskip\defbodyindent \defbodyindent=.4in +\newskip\defargsindent \defargsindent=50pt +\newskip\deflastargmargin \deflastargmargin=18pt -% #1 is the classification. #2 is the data type. #3 is the name and args. -\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} -% #1 is the classification, #2 the data type, #3 the name, #4 the args. -\def\deftypefnheaderx #1#2#3 #4\relax{% -\doind {fn}{\code{#3}}% Make entry in function index -\begingroup -\normalparens % notably, turn off `&' magic, which prevents -% at least some C++ text from working -\defname {\defheaderxcond#2\relax$$$#3}{#1}% -\deftypefunargs {#4}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody +% Start the processing of @deffn: +\def\startdefun{% + \ifnum\lastpenalty<10000 + \medbreak + \else + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we need to allow a + % break somewhere. Check for penalty 10002 (inserted by + % \defargscommonending) instead of 10000, since the sectioning + % commands insert a \penalty10000, and we don't want to allow a break + % between a section heading and a defun. + \ifnum\lastpenalty=10002 \penalty2000 \fi + % + % Similarly, after a section heading, do not allow a break. + % But do insert the glue. + \medskip % preceded by discardable penalty, so not a breakpoint + \fi + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent } -% @defmac == @deffn Macro - -\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} - -\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{\putwordDefmac}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody +\def\dodefunx#1{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As above, allow line break if we have multiple x headers in a row. + % It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \fi + % + % And now, it's time to reuse the body of the original defun: + \expandafter\gobbledefun#1% } +\def\gobbledefun#1\startdefun{} -% @defspec == @deffn Special Form - -\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} - -\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{\putwordDefspec}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody +% \printdefunline \deffnheader{text} +% +\def\printdefunline#1#2{% + \begingroup + % call \deffnheader: + #1#2 \endheader + % common ending: + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil + \endgraf + \nobreak\vskip -\parskip + \penalty 10002 % signal to \startdefun and \dodefunx + % Some of the @defun-type tags do not enable magic parentheses, + % rendering the following check redundant. But we don't optimize. + \checkparencounts + \endgroup } -% This definition is run if you use @defunx -% anywhere other than immediately after a @defun or @defunx. - -\def\deffnx #1 {\errmessage{@deffnx in invalid context}} -\def\defunx #1 {\errmessage{@defunx in invalid context}} -\def\defmacx #1 {\errmessage{@defmacx in invalid context}} -\def\defspecx #1 {\errmessage{@defspecx in invalid context}} -\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}} -\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}} -\def\deftypefunx #1 {\errmessage{@deftypefunx in invalid context}} - -% @defmethod, and so on - -% @defop CATEGORY CLASS OPERATION ARG... - -\def\defop #1 {\def\defoptype{#1}% -\defopparsebody\Edefop\defopx\defopheader\defoptype} - -\def\defopheader #1#2#3{% -\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index -\begingroup\defname {#2}{\defoptype{}\putwordon\ #1}% -\defunargs {#3}\endgroup % -} +\def\Edefun{\endgraf\medbreak} -% @deftypemethod CLASS RETURN-TYPE METHOD ARG... +% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; +% the only thing remainnig is to define \deffnheader. % -\def\deftypemethod{% - \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} -% -% #1 is the class name, #2 the data type, #3 the method name, #4 the args. -\def\deftypemethodheader#1#2#3#4{% - \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}% - \deftypefunargs{#4}% - \endgroup +\def\makedefun#1{% + \expandafter\let\csname E#1\endcsname = \Edefun + \edef\temp{\noexpand\domakedefun + \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% + \temp } -% @defmethod == @defop Method +% \domakedefun \deffn \deffnx \deffnheader % -\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} +% Define \deffn and \deffnx, without parameters. +% \deffnheader has to be defined explicitly. % -% #1 is the class name, #2 the method name, #3 the args. -\def\defmethodheader#1#2#3{% - \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{#2}{\putwordMethodon\ \code{#1}}% - \defunargs{#3}% - \endgroup +\def\domakedefun#1#2#3{% + \envdef#1{% + \startdefun + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#2{\dodefunx#1}% + \def#3% } -% @defcv {Class Option} foo-class foo-flag - -\def\defcv #1 {\def\defcvtype{#1}% -\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} +%%% Untyped functions: -\def\defcvarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index -\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}% -\defvarargs {#3}\endgroup % -} +% @deffn category name args +\makedefun{deffn}{\deffngeneral{}} -% @defivar == @defcv {Instance Variable} +% @deffn category class name args +\makedefun{defop}#1 {\defopon{#1\ \putwordon}} -\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} +% \defopon {category on}class name args +\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } -\def\defivarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index -\begingroup\defname {#2}{\putwordDefivar\ \putwordof\ #1}% -\defvarargs {#3}\endgroup % +% \deffngeneral {subind}category name args +% +\def\deffngeneral#1#2 #3 #4\endheader{% + % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. + \dosubind{fn}{\code{#3}}{#1}% + \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% } -% These definitions are run if you use @defmethodx, etc., -% anywhere other than immediately after a @defmethod, etc. +%%% Typed functions: -\def\defopx #1 {\errmessage{@defopx in invalid context}} -\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}} -\def\defcvx #1 {\errmessage{@defcvx in invalid context}} -\def\defivarx #1 {\errmessage{@defivarx in invalid context}} +% @deftypefn category type name args +\makedefun{deftypefn}{\deftypefngeneral{}} -% Now @defvar +% @deftypeop category class type name args +\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} -% First, define the processing that is wanted for arguments of @defvar. -% This is actually simple: just print them in roman. -% This must expand the args and terminate the paragraph they make up -\def\defvarargs #1{\normalparens #1% -\interlinepenalty=10000 -\endgraf\nobreak\vskip -\parskip\nobreak} +% \deftypeopon {category on}class type name args +\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } -% @defvr Counter foo-count +% \deftypefngeneral {subind}category type name args +% +\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% + \dosubind{fn}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} -\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader} +%%% Typed variables: -\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% -\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} +% @deftypevr category type var args +\makedefun{deftypevr}{\deftypecvgeneral{}} -% @defvar == @defvr Variable +% @deftypecv category class type var args +\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} -\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} +% \deftypecvof {category of}class type var args +\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } -\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{\putwordDefvar}% -\defvarargs {#2}\endgroup % +% \deftypecvgeneral {subind}category type var args +% +\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% + \dosubind{vr}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -% @defopt == @defvr {User Option} - -\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} +%%% Untyped variables: -\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{\putwordDefopt}% -\defvarargs {#2}\endgroup % -} +% @defvr category var args +\makedefun{defvr}#1 {\deftypevrheader{#1} {} } -% @deftypevar int foobar +% @defcv category class var args +\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} -\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} +% \defcvof {category of}class var args +\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } -% #1 is the data type. #2 is the name, perhaps followed by text that -% is actually part of the data type, which should not be put into the index. -\def\deftypevarheader #1#2{% -\dovarind#2 \relax% Make entry in variables index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}% -\interlinepenalty=10000 -\endgraf\nobreak\vskip -\parskip\nobreak -\endgroup} -\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} +%%% Type: +% @deftp category name args +\makedefun{deftp}#1 #2 #3\endheader{% + \doind{tp}{\code{#2}}% + \defname{#1}{}{#2}\defunargs{#3\unskip}% +} -% @deftypevr {Global Flag} int enable +% Remaining @defun-like shortcuts: +\makedefun{defun}{\deffnheader{\putwordDeffunc} } +\makedefun{defmac}{\deffnheader{\putwordDefmac} } +\makedefun{defspec}{\deffnheader{\putwordDefspec} } +\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } +\makedefun{defvar}{\defvrheader{\putwordDefvar} } +\makedefun{defopt}{\defvrheader{\putwordDefopt} } +\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } +\makedefun{defmethod}{\defopon\putwordMethodon} +\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} +\makedefun{defivar}{\defcvof\putwordInstanceVariableof} +\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} -\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} +% \defname, which formats the name of the @def (not the args). +% #1 is the category, such as "Function". +% #2 is the return type, if any. +% #3 is the function name. +% +% We are followed by (but not passed) the arguments, if any. +% +\def\defname#1#2#3{% + % Get the values of \leftskip and \rightskip as they were outside the @def... + \advance\leftskip by -\defbodyindent + % + % How we'll format the type name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \def\temp{#1}% + \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} + % + % Figure out line sizes for the paragraph shape. + % The first line needs space for \box0; but if \rightskip is nonzero, + % we need only space for the part of \box0 which exceeds it: + \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % The continuations: + \dimen2=\hsize \advance\dimen2 by -\defargsindent + % (plain.tex says that \dimen1 should be used only as global.) + \parshape 2 0in \dimen0 \defargsindent \dimen2 + % + % Put the type name to the right margin. + \noindent + \hbox to 0pt{% + \hfil\box0 \kern-\hsize + % \hsize has to be shortened this way: + \kern\leftskip + % Intentionally do not respect \rightskip, since we need the space. + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \exdentamount=\defbodyindent + {% + % defun fonts. We use typewriter by default (used to be bold) because: + % . we're printing identifiers, they should be in tt in principle. + % . in languages with many accents, such as Czech or French, it's + % common to leave accents off identifiers. The result looks ok in + % tt, but exceedingly strange in rm. + % . we don't want -- and --- to be treated as ligatures. + % . this still does not fix the ?` and !` ligatures, but so far no + % one has made identifiers using them :). + \df \tt + \def\temp{#2}% return value type + \ifx\temp\empty\else \tclose{\temp} \fi + #3% output function name + }% + {\rm\enskip}% hskip 0.5 em of \tenrm + % + \boldbrax + % arguments will be output next, if any. +} -\def\deftypevrheader #1#2#3{\dovarind#3 \relax% -\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1} -\interlinepenalty=10000 -\endgraf\nobreak\vskip -\parskip\nobreak -\endgroup} +% Print arguments in slanted roman (not ttsl), inconsistently with using +% tt for the name. This is because literal text is sometimes needed in +% the argument list (groff manual), and ttsl and tt are not very +% distinguishable. Prevent hyphenation at `-' chars. +% +\def\defunargs#1{% + % use sl by default (not ttsl), + % tt for the names. + \df \sl \hyphenchar\font=0 + % + % On the other hand, if an argument has two dashes (for instance), we + % want a way to get ttsl. Let's try @var for that. + \let\var=\ttslanted + #1% + \sl\hyphenchar\font=45 +} -% This definition is run if you use @defvarx -% anywhere other than immediately after a @defvar or @defvarx. +% We want ()&[] to print specially on the defun line. +% +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\[=\active \catcode`\]=\active + \catcode`\&=\active +} -\def\defvrx #1 {\errmessage{@defvrx in invalid context}} -\def\defvarx #1 {\errmessage{@defvarx in invalid context}} -\def\defoptx #1 {\errmessage{@defoptx in invalid context}} -\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}} -\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}} +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) -% Now define @deftp -% Args are printed in bold, a slight difference from @defvar. +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +{ + \activeparens + \global\let(=\lparen \global\let)=\rparen + \global\let[=\lbrack \global\let]=\rbrack + \global\let& = \& -\def\deftpargs #1{\bf \defvarargs{#1}} + \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + \gdef\magicamp{\let&=\amprm} +} -% @deftp Class window height width ... +\newcount\parencount -\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader} +% If we encounter &foo, then turn on ()-hacking afterwards +\newif\ifampseen +\def\amprm#1 {\ampseentrue{\bf\ }} + +\def\parenfont{% + \ifampseen + % At the first level, print parens in roman, + % otherwise use the default font. + \ifnum \parencount=1 \rm \fi + \else + % The \sf parens (in \boldbrax) actually are a little bolder than + % the contained text. This is especially needed for [ and ] . + \sf + \fi +} +\def\infirstlevel#1{% + \ifampseen + \ifnum\parencount=1 + #1% + \fi + \fi +} +\def\bfafterword#1 {#1 \bf} -\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% -\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} +\def\opnr{% + \global\advance\parencount by 1 + {\parenfont(}% + \infirstlevel \bfafterword +} +\def\clnr{% + {\parenfont)}% + \infirstlevel \sl + \global\advance\parencount by -1 +} -% This definition is run if you use @deftpx, etc -% anywhere other than immediately after a @deftp, etc. +\newcount\brackcount +\def\lbrb{% + \global\advance\brackcount by 1 + {\bf[}% +} +\def\rbrb{% + {\bf]}% + \global\advance\brackcount by -1 +} -\def\deftpx #1 {\errmessage{@deftpx in invalid context}} +\def\checkparencounts{% + \ifnum\parencount=0 \else \badparencount \fi + \ifnum\brackcount=0 \else \badbrackcount \fi +} +\def\badparencount{% + \errmessage{Unbalanced parentheses in @def}% + \global\parencount=0 +} +\def\badbrackcount{% + \errmessage{Unbalanced square braces in @def}% + \global\brackcount=0 +} \message{macros,} @@ -4538,28 +5433,33 @@ width0pt\relax} \fi % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. \ifx\eTeXversion\undefined - \newwrite\macscribble - \def\scanmacro#1{% - \begingroup \newlinechar`\^^M - % Undo catcode changes of \startcontents and \doprintindex - \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ - % Append \endinput to make sure that TeX does not see the ending newline. - \toks0={#1\endinput}% - \immediate\openout\macscribble=\jobname.tmp - \immediate\write\macscribble{\the\toks0}% - \immediate\closeout\macscribble - \let\xeatspaces\eatspaces - \input \jobname.tmp - \endgroup -} -\else -\def\scanmacro#1{% -\begingroup \newlinechar`\^^M -% Undo catcode changes of \startcontents and \doprintindex -\catcode`\@=0 \catcode`\\=12 \escapechar=`\@ -\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} + \newwrite\macscribble + \def\scantokens#1{% + \toks0={#1\endinput}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \input \jobname.tmp + } \fi +\def\scanmacro#1{% + \begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % Undo catcode changes of \startcontents and \doprintindex + \catcode`\@=0 \catcode`\\=\other \escapechar=`\@ + % ... and \example + \spaceisspace + % + % Append \endinput to make sure that TeX does not see the ending newline. + % + % I've verified that it is necessary both for e-TeX and for ordinary TeX + % --kasal, 29nov03 + \scantokens{#1\endinput}% + \endgroup +} + \newcount\paramno % Count of parameters \newtoks\macname % Macro name \newif\ifrecursive % Is it recursive? @@ -4567,7 +5467,7 @@ width0pt\relax} \fi % \do\macro1\do\macro2... % Utility routines. -% Thisdoes \let #1 = #2, except with \csnames. +% This does \let #1 = #2, except with \csnames. \def\cslet#1#2{% \expandafter\expandafter \expandafter\let @@ -4586,7 +5486,7 @@ width0pt\relax} \fi } % Trim a single trailing ^^M off a string. -{\catcode`\^^M=12\catcode`\Q=3% +{\catcode`\^^M=\other \catcode`\Q=3% \gdef\eatcr #1{\eatcra #1Q^^MQ}% \gdef\eatcra#1^^MQ{\eatcrb#1Q}% \gdef\eatcrb#1Q#2Q{#1}% @@ -4601,29 +5501,29 @@ width0pt\relax} \fi % body, and then making it the \newlinechar in \scanmacro. \def\macrobodyctxt{% - \catcode`\~=12 - \catcode`\^=12 - \catcode`\_=12 - \catcode`\|=12 - \catcode`\<=12 - \catcode`\>=12 - \catcode`\+=12 - \catcode`\{=12 - \catcode`\}=12 - \catcode`\@=12 - \catcode`\^^M=12 + \catcode`\~=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\+=\other + \catcode`\{=\other + \catcode`\}=\other + \catcode`\@=\other + \catcode`\^^M=\other \usembodybackslash} \def\macroargctxt{% - \catcode`\~=12 - \catcode`\^=12 - \catcode`\_=12 - \catcode`\|=12 - \catcode`\<=12 - \catcode`\>=12 - \catcode`\+=12 - \catcode`\@=12 - \catcode`\\=12} + \catcode`\~=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\+=\other + \catcode`\@=\other + \catcode`\\=\other} % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N @@ -4651,7 +5551,7 @@ width0pt\relax} \fi \message{Warning: redefining \the\macname}% \else \expandafter\ifx\csname \the\macname\endcsname \relax - \else \errmessage{The name \the\macname\space is reserved}\fi + \else \errmessage{Macro name \the\macname\space already defined}\fi \global\cslet{macsave.\the\macname}{\the\macname}% \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% % Add the macroname to \macrolist @@ -4664,32 +5564,32 @@ width0pt\relax} \fi \else \expandafter\parsemacbody \fi} -\def\unmacro{\parsearg\unmacroxxx} -\def\unmacroxxx#1{% +\parseargdef\unmacro{% \if1\csname ismacro.#1\endcsname \global\cslet{#1}{macsave.#1}% \global\expandafter\let \csname ismacro.#1\endcsname=0% - % Remove the macro name from \macrolist + % Remove the macro name from \macrolist: \begingroup - \edef\tempa{\expandafter\noexpand\csname#1\endcsname}% - \def\do##1{% - \def\tempb{##1}% - \ifx\tempa\tempb - % remove this - \else - \toks0 = \expandafter{\newmacrolist\do}% - \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}% - \fi}% - \def\newmacrolist{}% - % Execute macro list to define \newmacrolist - \macrolist - \global\let\macrolist\newmacrolist + \expandafter\let\csname#1\endcsname \relax + \let\do\unmacrodo + \xdef\macrolist{\macrolist}% \endgroup \else \errmessage{Macro #1 not defined}% \fi } +% Called by \do from \dounmacro on each macro. The idea is to omit any +% macro definitions that have been changed to \relax. +% +\def\unmacrodo#1{% + \ifx#1\relax + % remove this + \else + \noexpand\do \noexpand #1% + \fi +} + % This makes use of the obscure feature that if the last token of a % is #, then the preceding argument is delimited by % an opening brace, and that opening brace is not consumed. @@ -4812,10 +5712,21 @@ width0pt\relax} \fi % @alias. -\def\alias#1=#2{\gdef#1{#2}} +% We need some trickery to remove the optional spaces around the equal +% sign. Just make them active and then expand them all to nothing. +\def\alias{\parseargusing\obeyspaces\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{% + {% + \expandafter\let\obeyedspace=\empty + \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% + }% + \next +} \message{cross references,} + \newwrite\auxfile \newif\ifhavexrefs % True if xref values are known. @@ -4826,53 +5737,61 @@ width0pt\relax} \fi \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} -% @node's job is to define \lastnode. -\def\node{\ENVcheck\parsearg\nodezzz} -\def\nodezzz#1{\nodexxx [#1,]} -\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} +% @node's only job in TeX is to define \lastnode, which is used in +% cross-references. +\parseargdef\node{\checkenv{}\nodexxx #1,\finishnodeparse} +\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}} \let\nwnode=\node -\let\lastnode=\relax - -% The sectioning commands (@chapter, etc.) call these. -\def\donoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}% - {Ysectionnumberandtype}% - \global\let\lastnode=\relax - \fi -} -\def\unnumbnoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}% - \global\let\lastnode=\relax - \fi -} -\def\appendixnoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}% - {Yappendixletterandtype}% - \global\let\lastnode=\relax +\let\lastnode=\empty + +% Write a cross-reference definition for the current node. #1 is the +% type (Ynumbered, Yappendix, Ynothing). +% +\def\donoderef#1{% + \ifx\lastnode\empty\else + \setref{\lastnode}{#1}% + \global\let\lastnode=\empty \fi } - % @anchor{NAME} -- define xref target at arbitrary point. % -\def\anchor#1{\setref{#1}{Ynothing}} - - -% \setref{NAME}{SNT} defines a cross-reference point NAME, namely -% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have -% to set \indexdummies so commands such as @code in a section title -% aren't expanded. It would be nicer not to expand the titles in the -% first place, but there's so many layers that that is hard to do. +\newcount\savesfregister % -\def\setref#1#2{{% - \indexdummies - \dosetq{#1-title}{Ytitle}% - \dosetq{#1-pg}{Ypagenumber}% - \dosetq{#1-snt}{#2}% -}} +\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} + +% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an +% anchor), which consists of three parts: +% 1) NAME-title - the current sectioning name taken from \thissection, +% or the anchor name. +% 2) NAME-snt - section number and type, passed as the SNT arg, or +% empty for anchors. +% 3) NAME-pg - the page number. +% +% This is called from \donoderef, \anchor, and \dofloat. In the case of +% floats, there is an additional part, which is not written here: +% 4) NAME-lof - the text as it should appear in a @listoffloats. +% +\def\setref#1#2{% + \pdfmkdest{#1}% + \iflinks + {% + \atdummies % preserve commands, but don't expand them + \turnoffactive + \otherbackslash + \edef\writexrdef##1##2{% + \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef + ##1}{##2}}% these are parameters of \writexrdef + }% + \toks0 = \expandafter{\thissection}% + \immediate \writexrdef{title}{\the\toks0 }% + \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. + \writexrdef{pg}{\folio}% will be written later, during \shipout + }% + \fi +} % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed @@ -4883,122 +5802,158 @@ width0pt\relax} \fi \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces \def\printedmanual{\ignorespaces #5}% - \def\printednodename{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual}% - \setbox0=\hbox{\printednodename}% + \def\printedrefname{\ignorespaces #3}% + \setbox1=\hbox{\printedmanual\unskip}% + \setbox0=\hbox{\printedrefname\unskip}% \ifdim \wd0 = 0pt % No printed node name was explicitly given. \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax % Use the node name inside the square brackets. - \def\printednodename{\ignorespaces #1}% + \def\printedrefname{\ignorespaces #1}% \else % Use the actual chapter/section title appear inside % the square brackets. Use the real section title if we have it. \ifdim \wd1 > 0pt % It is in another manual, so we don't have it. - \def\printednodename{\ignorespaces #1}% + \def\printedrefname{\ignorespaces #1}% \else \ifhavexrefs % We know the real title if we have the xref values. - \def\printednodename{\refx{#1-title}{}}% + \def\printedrefname{\refx{#1-title}{}}% \else % Otherwise just copy the Info node name. - \def\printednodename{\ignorespaces #1}% + \def\printedrefname{\ignorespaces #1}% \fi% \fi \fi \fi % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. - \ifdim \wd1 > 0pt - \putwordsection{} ``\printednodename'' in \cite{\printedmanual}% + % Make link in pdf output. + \ifpdf + \leavevmode + \getfilename{#4}% + {\turnoffactive \otherbackslash + \ifnum\filenamelength>0 + \startlink attr{/Border [0 0 0]}% + goto file{\the\filename.pdf} name{#1}% + \else + \startlink attr{/Border [0 0 0]}% + goto name{\pdfmkpgn{#1}}% + \fi + }% + \linkcolor + \fi + % + % Float references are printed completely differently: "Figure 1.2" + % instead of "[somenode], p.3". We distinguish them by the + % LABEL-title being set to a magic string. + {% + % Have to otherify everything special to allow the \csname to + % include an _ in the xref name, etc. + \indexnofonts + \turnoffactive + \otherbackslash + \expandafter\global\expandafter\let\expandafter\Xthisreftitle + \csname XR#1-title\endcsname + }% + \iffloat\Xthisreftitle + % If the user specified the print name (third arg) to the ref, + % print it instead of our usual "Figure 1.2". + \ifdim\wd0 = 0pt + \refx{#1-snt}% + \else + \printedrefname + \fi + % + % if the user also gave the printed manual name (fifth arg), append + % "in MANUALNAME". + \ifdim \wd1 > 0pt + \space \putwordin{} \cite{\printedmanual}% + \fi \else - % _ (for example) has to be the character _ for the purposes of the - % control sequence corresponding to the node, but it has to expand - % into the usual \leavevmode...\vrule stuff for purposes of - % printing. So we \turnoffactive for the \refx-snt, back on for the - % printing, back off for the \refx-pg. - {\normalturnoffactive - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% - \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi - }% - % [mynode], - [\printednodename],\space - % page 3 - \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + % node/anchor (non-float) references. + % + % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not + % insert empty discretionaries after hyphens, which means that it will + % not find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, this + % is a loss. Therefore, we give the text of the node name again, so it + % is as if TeX is seeing it for the first time. + \ifdim \wd1 > 0pt + \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% + \else + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive \otherbackslash + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via a macro so it can be overridden. + \xrefprintnodename\printedrefname + % + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% + \fi \fi + \endlink \endgroup} -% \dosetq is the interface for calls from other macros - -% Use \normalturnoffactive so that punctuation chars such as underscore -% and backslash work in node names. (\turnoffactive doesn't do \.) -\def\dosetq#1#2{% - {\let\folio=0 - \normalturnoffactive - \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% - \iflinks - \next - \fi - }% -} - -% \internalsetq {foo}{page} expands into -% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} -% When the aux file is read, ' is the escape character - -\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} - -% Things to be expanded by \internalsetq - -\def\Ypagenumber{\folio} - -\def\Ytitle{\thissection} - -\def\Ynothing{} - -\def\Ysectionnumberandtype{% -\ifnum\secno=0 \putwordChapter\xreftie\the\chapno % -\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno % -\else \ifnum \subsubsecno=0 % -\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno % -\else % -\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\def\Yappendixletterandtype{% -\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}% -\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno % -\else \ifnum \subsubsecno=0 % -\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno % -\else % -\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\gdef\xreftie{'tie} +% This macro is called from \xrefX for the `[nodename]' part of xref +% output. It's a separate macro only so it can be changed more easily, +% since square brackets don't work well in some documents. Particularly +% one that Bob is working on :). +% +\def\xrefprintnodename#1{[#1]} -% Use TeX 3.0's \inputlineno to get the line number, for better error -% messages, but if we're using an old version of TeX, don't do anything. +% Things referred to by \setref. % -\ifx\inputlineno\thisisundefined - \let\linenumber = \empty % Non-3.0. -\else - \def\linenumber{\the\inputlineno:\space} -\fi +\def\Ynothing{} +\def\Yomitfromtoc{} +\def\Ynumbered{% + \ifnum\secno=0 + \putwordChapter@tie \the\chapno + \else \ifnum\subsecno=0 + \putwordSection@tie \the\chapno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno + \else + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} +\def\Yappendix{% + \ifnum\secno=0 + \putwordAppendix@tie @char\the\appendixno{}% + \else \ifnum\subsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno + \else + \putwordSection@tie + @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. % If its value is nonempty, SUFFIX is output afterward. - +% \def\refx#1#2{% - \expandafter\ifx\csname X#1\endcsname\relax + {% + \indexnofonts + \otherbackslash + \expandafter\global\expandafter\let\expandafter\thisrefX + \csname XR#1\endcsname + }% + \ifx\thisrefX\relax % If not defined, say something at least. \angleleft un\-de\-fined\angleright \iflinks @@ -5013,21 +5968,49 @@ width0pt\relax} \fi \fi \else % It's defined, so just use it. - \csname X#1\endcsname + \thisrefX \fi #2% Output the suffix in any case. } -% This is the macro invoked by entries in the aux file. +% This is the macro invoked by entries in the aux file. Usually it's +% just a \def (we prepend XR to the control sequence name to avoid +% collisions). But if this is a float type, we have more work to do. % -\def\xrdef#1{\begingroup - % Reenable \ as an escape while reading the second argument. - \catcode`\\ = 0 - \afterassignment\endgroup - \expandafter\gdef\csname X#1\endcsname +\def\xrdef#1#2{% + \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value. + % + % Was that xref control sequence that we just defined for a float? + \expandafter\iffloat\csname XR#1\endcsname + % it was a float, and we have the (safe) float type in \iffloattype. + \expandafter\let\expandafter\floatlist + \csname floatlist\iffloattype\endcsname + % + % Is this the first time we've seen this float type? + \expandafter\ifx\floatlist\relax + \toks0 = {\do}% yes, so just \do + \else + % had it before, so preserve previous elements in list. + \toks0 = \expandafter{\floatlist\do}% + \fi + % + % Remember this xref in the control sequence \floatlistFLOATTYPE, + % for later use in \listoffloats. + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}% + \fi } % Read the last existing aux file, if any. No error if none exists. +% +\def\tryauxfile{% + \openin 1 \jobname.aux + \ifeof 1 \else + \readauxfile + \global\havexrefstrue + \fi + \closein 1 +} + \def\readauxfile{\begingroup \catcode`\^^@=\other \catcode`\^^A=\other @@ -5056,9 +6039,7 @@ width0pt\relax} \fi \catcode`\^^]=\other \catcode`\^^^=\other \catcode`\^^_=\other - \catcode`\@=\other - \catcode`\^=\other - % It was suggested to define this as 7, which would allow ^^e4 etc. + % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. % in xref tags, i.e., node names. But since ^^e4 notation isn't % supported in the main text, it doesn't seem desirable. Furthermore, % that is not enough: for node names that actually contain a ^ @@ -5071,6 +6052,9 @@ width0pt\relax} \fi % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter % and then to call \auxhat in \setq. % + \catcode`\^=\other + % + % Special characters. Should be turned off anyway, but... \catcode`\~=\other \catcode`\[=\other \catcode`\]=\other @@ -5082,8 +6066,19 @@ width0pt\relax} \fi \catcode`\$=\other \catcode`\#=\other \catcode`\&=\other + \catcode`\%=\other \catcode`+=\other % avoid \+ for paranoia even though we've turned it off - % Make the characters 128-255 be printing characters + % + % This is to support \ in node names and titles, since the \ + % characters end up in a \csname. It's easier than + % leaving it active and making its active definition an actual \ + % character. What I don't understand is why it works in the *value* + % of the xrdef. Seems like it should be a catcode12 \, and that + % should not typeset properly. But it works, so I'm moving on for + % now. --karl, 15jan04. + \catcode`\\=\other + % + % Make the characters 128-255 be printing characters. {% \count 1=128 \def\loop{% @@ -5092,31 +6087,18 @@ width0pt\relax} \fi \ifnum \count 1<256 \loop \fi }% }% - % The aux file uses ' as the escape (for now). - % Turn off \ as an escape so we do not lose on - % entries which were dumped with control sequences in their names. - % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ - % Reference to such entries still does not work the way one would wish, - % but at least they do not bomb out when the aux file is read in. + % + % @ is our escape character in .aux files, and we need braces. \catcode`\{=1 \catcode`\}=2 - \catcode`\%=\other - \catcode`\'=0 - \catcode`\\=\other + \catcode`\@=0 % - \openin 1 \jobname.aux - \ifeof 1 \else - \closein 1 - \input \jobname.aux - \global\havexrefstrue - \global\warnedobstrue - \fi - % Open the new aux file. TeX will close it automatically at exit. - \openout\auxfile=\jobname.aux + \input \jobname.aux \endgroup} -% Footnotes. +\message{insertions,} +% including footnotes. \newcount \footnoteno @@ -5130,37 +6112,39 @@ width0pt\relax} \fi % @footnotestyle is meaningful for info output only. \let\footnotestyle=\comment -\let\ptexfootnote=\footnote - {\catcode `\@=11 % % Auto-number footnotes. Otherwise like plain. \gdef\footnote{% + \let\indent=\ptexindent + \let\noindent=\ptexnoindent \global\advance\footnoteno by \@ne \edef\thisfootno{$^{\the\footnoteno}$}% % % In case the footnote comes at the end of a sentence, preserve the % extra spacing after we do the footnote number. \let\@sf\empty - \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi % % Remove inadvertent blank space before typesetting the footnote number. \unskip \thisfootno\@sf - \footnotezzz + \dofootnote }% % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. % -% Oh yes, they do; otherwise, @ifset and anything else that uses -% \parseargline fail inside footnotes because the tokens are fixed when +% Oh yes, they do; otherwise, @ifset (and anything else that uses +% \parseargline) fails inside footnotes because the tokens are fixed when % the footnote is read. --karl, 16nov96. % -\long\gdef\footnotezzz{\insert\footins\bgroup +\gdef\dofootnote{% + \insert\footins\bgroup % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. + \hsize=\pagewidth \interlinepenalty\interfootnotelinepenalty \splittopskip\ht\strutbox % top baseline for broken footnotes \splitmaxdepth\dp\strutbox @@ -5171,8 +6155,17 @@ width0pt\relax} \fi \xspaceskip\z@skip \parindent\defaultparindent % - % Hang the footnote text off the number. - \hang + \smallfonts \rm + % + % Because we use hanging indentation in footnotes, a @noindent appears + % to exdent this text, so make it be a no-op. makeinfo does not use + % hanging indentation so @noindent can still be needed within footnote + % text after an @example or the like (not that this is good style). + \let\noindent = \relax + % + % Hang the footnote text off the number. Use \everypar in case the + % footnote extends for more than one paragraph. + \everypar = {\hang}% \textindent{\thisfootno}% % % Don't crash into the line above the footnote text. Since this @@ -5181,66 +6174,68 @@ width0pt\relax} \fi \footstrut \futurelet\next\fo@t } -\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t - \else\let\next\f@t\fi \next} -\def\f@@t{\bgroup\aftergroup\@foot\let\next} -\def\f@t#1{#1\@foot} -\def\@foot{\strut\egroup} - }%end \catcode `\@=11 -% Set the baselineskip to #1, and the lineskip and strut size -% correspondingly. There is no deep meaning behind these magic numbers -% used as factors; they just match (closely enough) what Knuth defined. -% -\def\lineskipfactor{.08333} -\def\strutheightpercent{.70833} -\def\strutdepthpercent {.29167} +% In case a @footnote appears in a vbox, save the footnote text and create +% the real \insert just after the vbox finished. Otherwise, the insertion +% would be lost. +% Similarily, if a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is finished. +% And the same can be done for other insert classes. --kasal, 16nov03. + +% Replace the \insert primitive by a cheating macro. +% Deeper inside, just make sure that the saved insertions are not spilled +% out prematurely. % -\def\setleading#1{% - \normalbaselineskip = #1\relax - \normallineskip = \lineskipfactor\normalbaselineskip - \normalbaselines - \setbox\strutbox =\hbox{% - \vrule width0pt height\strutheightpercent\baselineskip - depth \strutdepthpercent \baselineskip - }% +\def\startsavinginserts{% + \ifx \insert\ptexinsert + \let\insert\saveinsert + \else + \let\checkinserts\relax + \fi } -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). +% This \insert replacement works for both \insert\footins{foo} and +% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. % -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% +\def\saveinsert#1{% + \edef\next{\noexpand\savetobox \makeSAVEname#1}% + \afterassignment\next + % swallow the left brace + \let\temp = } +\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} +\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} + +\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} + +\def\placesaveins#1{% + \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname + {\box#1}% +} + +% eat @SAVE -- beware, all of them have catcode \other: +{ + \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) + \gdef\gobblesave @SAVE{} +} + +% initialization: +\def\newsaveins #1{% + \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% + \next +} +\def\newsaveinsX #1{% + \csname newbox\endcsname #1% + \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts + \checksaveins #1}% +} + +% initialize: +\let\checkinserts\empty +\newsaveins\footins +\newsaveins\margin -% For a final copy, take out the rectangles -% that mark overfull boxes (in case you have decided -% that the text looks ok even though it passes the margin). -% -\def\finalout{\overfullrule=0pt} % @image. We use the macros from epsf.tex to support this. % If epsf.tex is not installed and @image is used, we complain. @@ -5250,76 +6245,332 @@ width0pt\relax} \fi % undone and the next image would fail. \openin 1 = epsf.tex \ifeof 1 \else - \closein 1 - % Do not bother showing banner with post-v2.7 epsf.tex (available in - % doc/epsf.tex until it shows up on ctan). + % Do not bother showing banner with epsf.tex v2.7k (available in + % doc/epsf.tex and on ctan). \def\epsfannounce{\toks0 = }% \input epsf.tex \fi +\closein 1 % +% We will only complain once about lack of epsf.tex. \newif\ifwarnednoepsf \newhelp\noepsfhelp{epsf.tex must be installed for images to work. It is also included in the Texinfo distribution, or you can get it from ftp://tug.org/tex/epsf.tex.} % -% Only complain once about lack of epsf.tex. \def\image#1{% - \ifx\pdfoutput\undefined - \ifx\epsfbox\undefined - \ifwarnednoepsf \else - \errhelp = \noepsfhelp - \errmessage{epsf.tex not found, images will be ignored}% - \global\warnednoepsftrue - \fi - \else - \imagexxx #1,,,\finish + \ifx\epsfbox\undefined + \ifwarnednoepsf \else + \errhelp = \noepsfhelp + \errmessage{epsf.tex not found, images will be ignored}% + \global\warnednoepsftrue \fi \else - \centerline{\pdfimage #1.pdf}% + \imagexxx #1,,,,,\finish \fi } % % Arguments to @image: % #1 is (mandatory) image filename; we tack on .eps extension. % #2 is (optional) width, #3 is (optional) height. -% #4 is just the usual extra ignored arg for parsing this stuff. -\def\imagexxx#1,#2,#3,#4\finish{% - % \epsfbox itself resets \epsf?size at each figure. - \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi - \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi +% #4 is (ignored optional) html alt text. +% #5 is (ignored optional) extension. +% #6 is just the usual extra ignored arg for parsing this stuff. +\newif\ifimagevmode +\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup + \catcode`\^^M = 5 % in case we're inside an example + \normalturnoffactive % allow _ et al. in names % If the image is by itself, center it. \ifvmode - \nobreak\medskip + \imagevmodetrue + \nobreak\bigskip + % Usually we'll have text after the image which will insert + % \parskip glue, so insert it here too to equalize the space + % above and below. + \nobreak\vskip\parskip \nobreak - \centerline{\epsfbox{#1.eps}}% - \bigbreak + \line\bgroup\hss + \fi + % + % Output the image. + \ifpdf + \dopdfimage{#1}{#2}{#3}% \else - % In the middle of a paragraph, no extra space. + % \epsfbox itself resets \epsf?size at each figure. + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi + \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi \epsfbox{#1.eps}% \fi + % + \ifimagevmode \hss \egroup \bigbreak \fi % space after the image +\endgroup} + + +% @float FLOATTYPE,LOC ... @end float for displayed figures, tables, etc. +% We don't actually implement floating yet, we just plop the float "here". +% But it seemed the best name for the future. +% +\envparseargdef\float{\dofloat #1,,,\finish} + +% #1 is the optional FLOATTYPE, the text label for this float, typically +% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, +% this float will not be numbered and cannot be referred to. +% +% #2 is the optional xref label. Also must be present for the float to +% be referable. +% +% #3 is the optional positioning argument; for now, it is ignored. It +% will somehow specify the positions allowed to float to (here, top, bottom). +% +% We keep a separate counter for each FLOATTYPE, which we reset at each +% chapter-level command. +\let\resetallfloatnos=\empty +% +\def\dofloat#1,#2,#3,#4\finish{% + \let\thiscaption=\empty + \let\thisshortcaption=\empty + % + % don't lose footnotes inside @float. + \startsavinginserts + % + % We can't be used inside a paragraph. + \par + % + \vtop\bgroup + \def\floattype{#1}% + \def\floatlabel{#2}% + \def\floatloc{#3}% we do nothing with this yet. + % + \ifx\floattype\empty + \let\safefloattype=\empty + \else + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + \fi + % + % If label is given but no type, we handle that as the empty type. + \ifx\floatlabel\empty \else + % We want each FLOATTYPE to be numbered separately (Figure 1, + % Table 1, Figure 2, ...). (And if no label, no number.) + % + \expandafter\getfloatno\csname\safefloattype floatno\endcsname + \global\advance\floatno by 1 + % + {% + % This magic value for \thissection is output by \setref as the + % XREFLABEL-title value. \xrefX uses it to distinguish float + % labels (which have a completely different output format) from + % node and anchor labels. And \xrdef uses it to construct the + % lists of floats. + % + \edef\thissection{\floatmagic=\safefloattype}% + \setref{\floatlabel}{Yfloat}% + }% + \fi + % + % start with \parskip glue, I guess. + \vskip\parskip + % + % Don't suppress indentation if a float happens to start a section. + \restorefirstparagraphindent +} + +% we have these possibilities: +% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap +% @float Foo,lbl & no caption: Foo 1.1 +% @float Foo & @caption{Cap}: Foo: Cap +% @float Foo & no caption: Foo +% @float ,lbl & Caption{Cap}: 1.1: Cap +% @float ,lbl & no caption: 1.1 +% @float & @caption{Cap}: Cap +% @float & no caption: +% +\def\Efloat{% + \let\floatident = \empty + % + % In all cases, if we have a float type, it comes first. + \ifx\floattype\empty \else \def\floatident{\floattype}\fi + % + % If we have an xref label, the number comes next. + \ifx\floatlabel\empty \else + \ifx\floattype\empty \else % if also had float type, need tie first. + \appendtomacro\floatident{\tie}% + \fi + % the number. + \appendtomacro\floatident{\chaplevelprefix\the\floatno}% + \fi + % + % Start the printed caption with what we've constructed in + % \floatident, but keep it separate; we need \floatident again. + \let\captionline = \floatident + % + \ifx\thiscaption\empty \else + \ifx\floatident\empty \else + \appendtomacro\captionline{: }% had ident, so need a colon between + \fi + % + % caption text. + \appendtomacro\captionline\thiscaption + \fi + % + % If we have anything to print, print it, with space before. + % Eventually this needs to become an \insert. + \ifx\captionline\empty \else + \vskip.5\parskip + \captionline + \fi + % + % If have an xref label, write the list of floats info. Do this + % after the caption, to avoid chance of it being a breakpoint. + \ifx\floatlabel\empty \else + % Write the text that goes in the lof to the aux file as + % \floatlabel-lof. Besides \floatident, we include the short + % caption if specified, else the full caption if specified, else nothing. + {% + \atdummies \turnoffactive \otherbackslash + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{% + \floatident + \ifx\thisshortcaption\empty + \ifx\thiscaption\empty \else : \thiscaption \fi + \else + : \thisshortcaption + \fi + }}% + }% + \fi + % + % Space below caption, if we printed anything. + \ifx\printedsomething\empty \else \vskip\parskip \fi + \egroup % end of \vtop + \checkinserts +} + +% Append the tokens #2 to the definition of macro #1, not expanding either. +% +\newtoks\appendtomacroAtoks +\newtoks\appendtomacroBtoks +\def\appendtomacro#1#2{% + \appendtomacroAtoks = \expandafter{#1}% + \appendtomacroBtoks = {#2}% + \edef#1{\the\appendtomacroAtoks \the\appendtomacroBtoks}% +} + +% @caption, @shortcaption are easy. +% +\long\def\caption#1{\checkenv\float \def\thiscaption{#1}} +\def\shortcaption#1{\checkenv\float \def\thisshortcaption{#1}} + +% The parameter is the control sequence identifying the counter we are +% going to use. Create it if it doesn't exist and assign it to \floatno. +\def\getfloatno#1{% + \ifx#1\relax + % Haven't seen this figure type before. + \csname newcount\endcsname #1% + % + % Remember to reset this floatno at the next chap. + \expandafter\gdef\expandafter\resetallfloatnos + \expandafter{\resetallfloatnos #1=0 }% + \fi + \let\floatno#1% +} + +% \setref calls this to get the XREFLABEL-snt value. We want an @xref +% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we +% first read the @float command. +% +\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% + +% Magic string used for the XREFLABEL-title value, so \xrefX can +% distinguish floats from other xref types. +\def\floatmagic{!!float!!} + +% #1 is the control sequence we are passed; we expand into a conditional +% which is true if #1 represents a float ref. That is, the magic +% \thissection value which we \setref above. +% +\def\iffloat#1{\expandafter\doiffloat#1==\finish} +% +% #1 is (maybe) the \floatmagic string. If so, #2 will be the +% (safe) float type for this float. We set \iffloattype to #2. +% +\def\doiffloat#1=#2=#3\finish{% + \def\temp{#1}% + \def\iffloattype{#2}% + \ifx\temp\floatmagic +} + +% @listoffloats FLOATTYPE - print a list of floats like a table of contents. +% +\parseargdef\listoffloats{% + \def\floattype{#1}% floattype + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + % + % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. + \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax + \ifhavexrefs + % if the user said @listoffloats foo but never @float foo. + \message{\linenumber No `\safefloattype' floats to list.}% + \fi + \else + \begingroup + \leftskip=\tocindent % indent these entries like a toc + \let\do=\listoffloatsdo + \csname floatlist\safefloattype\endcsname + \endgroup + \fi } +% This is called on each entry in a list of floats. We're passed the +% xref label, in the form LABEL-title, which is how we save it in the +% aux file. We strip off the -title and look up \XRLABEL-lof, which +% has the text we're supposed to typeset here. +% +% Figures without xref labels will not be included in the list (since +% they won't appear in the aux file). +% +\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} +\def\listoffloatsdoentry#1-title\finish{{% + % Can't fully expand XR#1-lof because it can contain anything. Just + % pass the control sequence. On the other hand, XR#1-pg is just the + % page number, and we want to fully expand that so we can get a link + % in pdf output. + \toksA = \expandafter{\csname XR#1-lof\endcsname}% + % + % use the same \entry macro we use to generate the TOC and index. + \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% + \writeentry +}} \message{localization,} +% and i18n. % @documentlanguage is usually given very early, just after % @setfilename. If done too late, it may not override everything % properly. Single argument is the language abbreviation. % It would be nice if we could set up a hyphenation file here. % -\def\documentlanguage{\parsearg\dodocumentlanguage} -\def\dodocumentlanguage#1{% +\parseargdef\documentlanguage{% \tex % read txi-??.tex file in plain TeX. - % Read the file if it exists. - \openin 1 txi-#1.tex - \ifeof1 - \errhelp = \nolanghelp - \errmessage{Cannot read language file txi-#1.tex}% - \let\temp = \relax - \else - \def\temp{\input txi-#1.tex }% - \fi - \temp + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \input txi-#1.tex + \fi + \closein 1 \endgroup } \newhelp\nolanghelp{The given language definition file cannot be found or @@ -5360,16 +6611,18 @@ should work if nowhere else does.} % Allow us to assign to \emergencystretch anyway. \def\emergencystretch{\dimen0}% \else - \emergencystretch = \hsize - \divide\emergencystretch by 40 + \emergencystretch = .15\hsize \fi } % Parameters in order: 1) textheight; 2) textwidth; 3) voffset; -% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can -% set \parskip and call \setleading for \baselineskip. +% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8) +% physical page width. +% +% We also call \setleading{\textleading}, so the caller should define +% \textleading. The caller should also set \parskip. % -\def\internalpagesizes#1#2#3#4#5#6{% +\def\internalpagesizes#1#2#3#4#5#6#7#8{% \voffset = #3\relax \topskip = #6\relax \splittopskip = \topskip @@ -5388,6 +6641,13 @@ should work if nowhere else does.} \normaloffset = #4\relax \bindingoffset = #5\relax % + \ifpdf + \pdfpageheight #7\relax + \pdfpagewidth #8\relax + \fi + % + \setleading{\textleading} + % \parindent = \defaultparindent \setemergencystretch } @@ -5395,82 +6655,129 @@ should work if nowhere else does.} % @letterpaper (the default). \def\letterpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt - \setleading{13.2pt}% + \textleading = 13.2pt % % If page is nothing but text, make it come out even. - \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}% + \internalpagesizes{46\baselineskip}{6in}% + {\voffset}{.25in}% + {\bindingoffset}{36pt}% + {11in}{8.5in}% }} % Use @smallbook to reset parameters for 7x9.5 (or so) format. \def\smallbook{{\globaldefs = 1 \parskip = 2pt plus 1pt - \setleading{12pt}% + \textleading = 12pt % - \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}% + \internalpagesizes{7.5in}{5in}% + {\voffset}{.25in}% + {\bindingoffset}{16pt}% + {9.25in}{7in}% % \lispnarrowing = 0.3in \tolerance = 700 \hfuzz = 1pt \contentsrightmargin = 0pt - \deftypemargin = 0pt \defbodyindent = .5cm - % - \let\smalldisplay = \smalldisplayx - \let\smallexample = \smalllispx - \let\smallformat = \smallformatx - \let\smalllisp = \smalllispx }} % Use @afourpaper to print on European A4 paper. \def\afourpaper{{\globaldefs = 1 - \setleading{12pt}% \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt % - \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}% + % Double-side printing via postscript on Laserjet 4050 + % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm. + % To change the settings for a different printer or situation, adjust + % \normaloffset until the front-side and back-side texts align. Then + % do the same for \bindingoffset. You can set these for testing in + % your texinfo source file like this: + % @tex + % \global\normaloffset = -6mm + % \global\bindingoffset = 10mm + % @end tex + \internalpagesizes{51\baselineskip}{160mm} + {\voffset}{\hoffset}% + {\bindingoffset}{44pt}% + {297mm}{210mm}% % \tolerance = 700 \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = 5mm }} -% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin -% 29mm, hence bottom margin 28mm, nominal side margin 3cm. -\def\afourlatex{{\globaldefs = 1 - \setleading{13.6pt}% +% Use @afivepaper to print on European A5 paper. +% From romildo@urano.iceb.ufop.br, 2 July 2000. +% He also recommends making @example and @lisp be small. +\def\afivepaper{{\globaldefs = 1 + \parskip = 2pt plus 1pt minus 0.1pt + \textleading = 12.5pt % + \internalpagesizes{160mm}{120mm}% + {\voffset}{\hoffset}% + {\bindingoffset}{8pt}% + {210mm}{148mm}% + % + \lispnarrowing = 0.2in + \tolerance = 800 + \hfuzz = 1.2pt + \contentsrightmargin = 0pt + \defbodyindent = 2mm + \tableindent = 12mm +}} + +% A specific text layout, 24x15cm overall, intended for A4 paper. +\def\afourlatex{{\globaldefs = 1 \afourpaper - \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}% + \internalpagesizes{237mm}{150mm}% + {\voffset}{4.6mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% % + % Must explicitly reset to 0 because we call \afourpaper. \globaldefs = 0 }} -% Use @afourwide to print on European A4 paper in wide format. -\def\afourwide{% +% Use @afourwide to print on A4 paper in landscape format. +\def\afourwide{{\globaldefs = 1 \afourpaper - \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}% - % + \internalpagesizes{241mm}{165mm}% + {\voffset}{-2.95mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% \globaldefs = 0 -} +}} % @pagesizes TEXTHEIGHT[,TEXTWIDTH] % Perhaps we should allow setting the margins, \topskip, \parskip, % and/or leading, also. Or perhaps we should compute them somehow. % -\def\pagesizes{\parsearg\pagesizesxxx} -\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish} +\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} \def\pagesizesyyy#1,#2,#3\finish{{% \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi \globaldefs = 1 % \parskip = 3pt plus 2pt minus 1pt - \setleading{13.2pt}% + \setleading{\textleading}% % - \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}% + \dimen0 = #1 + \advance\dimen0 by \voffset + % + \dimen2 = \hsize + \advance\dimen2 by \normaloffset + % + \internalpagesizes{#1}{\hsize}% + {\voffset}{\normaloffset}% + {\bindingoffset}{44pt}% + {\dimen0}{\dimen2}% }} % Set default to letter. % \letterpaper + \message{and turning on texinfo input format.} % Define macros to output various characters with catcode for normal text. @@ -5482,6 +6789,7 @@ should work if nowhere else does.} \catcode`\<=\other \catcode`\>=\other \catcode`\+=\other +\catcode`\$=\other \def\normaldoublequote{"} \def\normaltilde{~} \def\normalcaret{^} @@ -5490,9 +6798,10 @@ should work if nowhere else does.} \def\normalless{<} \def\normalgreater{>} \def\normalplus{+} +\def\normaldollar{$}%$ font-lock fix -% This macro is used to make a character print one way in ttfont -% where it can probably just be output, and another way in other fonts, +% This macro is used to make a character print one way in \tt +% (where it can probably be output as-is), and another way in other fonts, % where something hairier probably needs to be done. % % #1 is what to print if we are indeed using \tt; #2 is what to print @@ -5500,7 +6809,13 @@ should work if nowhere else does.} % interword stretch (and shrink), and it is reasonable to expect all % typewriter fonts to have this, we can check that font parameter. % -\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi} +\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} + +% Same as above, but check for italic font. Actually this also catches +% non-italic slanted fonts since it is impossible to distinguish them from +% italic fonts. But since this is only used by $ and it uses \sl anyway +% this is not a problem. +\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} % Turn off all special characters except @ % (and those which the user can use as if they were ordinary). @@ -5519,7 +6834,7 @@ should work if nowhere else does.} \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} % Subroutine for the previous macro. -\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}} +\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } \catcode`\|=\active \def|{{\tt\char124}} @@ -5531,15 +6846,8 @@ should work if nowhere else does.} \def>{{\tt \gtr}} \catcode`\+=\active \def+{{\tt \char 43}} -%\catcode 27=\active -%\def^^[{$\diamondsuit$} - -% Set up an active definition for =, but don't enable it most of the time. -{\catcode`\==\active -\global\def={{\tt \char 61}}} - -\catcode`+=\active -\catcode`\_=\active +\catcode`\$=\active +\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix % If a .fmt file is being used, characters that might appear in a file % name cannot be active until we have parsed the command line. @@ -5549,45 +6857,48 @@ should work if nowhere else does.} \catcode`\@=0 -% \rawbackslashxx output one backslash character in current font -\global\chardef\rawbackslashxx=`\\ -%{\catcode`\\=\other -%@gdef@rawbackslashxx{\}} +% \backslashcurfont outputs one backslash character in current font, +% as in \char`\\. +\global\chardef\backslashcurfont=`\\ +\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work -% \rawbackslash redefines \ as input to do \rawbackslashxx. +% \rawbackslash defines an active \ to do \backslashcurfont. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. {\catcode`\\=\active -@gdef@rawbackslash{@let\=@rawbackslashxx }} + @gdef@rawbackslash{@let\=@backslashcurfont} + @gdef@otherbackslash{@let\=@realbackslash} +} -% \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\rawbackslashxx}} +% \realbackslash is an actual character `\' with catcode other. +{\catcode`\\=\other @gdef@realbackslash{\}} -% Say @foo, not \foo, in error messages. -\escapechar=`\@ +% \normalbackslash outputs one backslash in fixed width font. +\def\normalbackslash{{\tt\backslashcurfont}} -% \catcode 17=0 % Define control-q \catcode`\\=\active % Used sometimes to turn off (effectively) the active characters % even after parsing them. -@def@turnoffactive{@let"=@normaldoublequote -@let\=@realbackslash -@let~=@normaltilde -@let^=@normalcaret -@let_=@normalunderscore -@let|=@normalverticalbar -@let<=@normalless -@let>=@normalgreater -@let+=@normalplus} - -@def@normalturnoffactive{@let"=@normaldoublequote -@let\=@normalbackslash -@let~=@normaltilde -@let^=@normalcaret -@let_=@normalunderscore -@let|=@normalverticalbar -@let<=@normalless -@let>=@normalgreater -@let+=@normalplus} +@def@turnoffactive{% + @let"=@normaldoublequote + @let\=@realbackslash + @let~=@normaltilde + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let<=@normalless + @let>=@normalgreater + @let+=@normalplus + @let$=@normaldollar %$ font-lock fix + @unsepspaces +} + +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. (Thus, \ is not expandable when this is in +% effect.) +% +@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash} % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. @@ -5606,20 +6917,31 @@ should work if nowhere else does.} % Also back turn on active characters that might appear in the input % file name, in case not using a pre-dumped format. % -@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi - @catcode`+=@active @catcode`@_=@active} +@gdef@fixbackslash{% + @ifx\@eatinput @let\ = @normalbackslash @fi + @catcode`+=@active + @catcode`@_=@active +} -% These look ok in all fonts, so just make them not special. The @rm below -% makes sure that the current font starts out as the newly loaded cmr10 -@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other +% Say @foo, not \foo, in error messages. +@escapechar = `@@ + +% These look ok in all fonts, so just make them not special. +@catcode`@& = @other +@catcode`@# = @other +@catcode`@% = @other -@textfonts -@rm @c Local variables: @c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" @c time-stamp-start: "def\\\\texinfoversion{" -@c time-stamp-format: "%:y-%02m-%02d.%H" +@c time-stamp-format: "%:y-%02m-%02d.%02H" @c time-stamp-end: "}" @c End: + +@c vim:sw=2: + +@ignore + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 +@end ignore diff --git a/doc/vtysh.texi b/doc/vtysh.texi index de59f7f7..b4c3fcb7 100644 --- a/doc/vtysh.texi +++ b/doc/vtysh.texi @@ -1,5 +1,4 @@ @node VTY shell -@comment node-name, next, previous, up @chapter VTY shell @command{vtysh} is integrated shell of Quagga software. @@ -14,6 +13,14 @@ authentication settings. Currently, vtysh.conf has only two commands. +@menu +* VTY shell username:: +* VTY shell integrated configuration:: +@end menu + +@node VTY shell username +@section VTY shell username + @deffn {Command} {username @var{username} nopassword} {} With this set, user foo does not need password authentication for user vtysh. @@ -26,28 +33,29 @@ of unix groups and the --enable-vty-group configure option. @end deffn -@deffn {Command} {write-conf daemon} {} -Instruct daemons to write out their config files when 'write file' -is issued. -@end deffn -@deffn {Command} {write-conf integrated} {} +@node VTY shell integrated configuration +@section + +@deffn {Command} {service integrated-vtysh-config} {} Write out integrated Quagga.conf file when 'write file' is issued. -@end deffn -This command controls the behaviour of vtysh when it is told -to write out the configuration. If @command{write-conf integrated} is -set, the daemon will write out a Quagga.conf with all daemons' commands -integrated into it. If @command{write-conf daemon} is set, vtysh -will instruct each daemon to write out their config files. +This command controls the behaviour of vtysh when it is told to write out +the configuration. Per default, vtysh will instruct each daemon to write +out their own config files when @command{write file} is issued. However, if +@command{service integrated-vtysh-config} is set, when @command{write file} +is issued, vtysh will instruct the daemons will write out a Quagga.conf with +all daemons' commands integrated into it. Vtysh per default behaves as if @command{write-conf daemon} is set. Note -that both may be set at same time if one wishes to have both -Quagga.conf and daemon specific files written out. Further, note that the -daemons are hard-coded to first look for the integrated Quagga.conf -file before looking for their own file. - -We recommend you do not mix the use of the two types of files. -Further, it is better not to use the integrated Quagga.conf file, -as any syntax error in it can lead to /all/ of your daemons being unable -to start up. Per daemon files are more robust as impact of errors in -configuration are limited to the daemon in whose file the error is made. +that both may be set at same time if one wishes to have both Quagga.conf and +daemon specific files written out. Further, note that the daemons are +hard-coded to first look for the integrated Quagga.conf file before looking +for their own file. + +We recommend you do not mix the use of the two types of files. Further, it +is better not to use the integrated Quagga.conf file, as any syntax error in +it can lead to /all/ of your daemons being unable to start up. Per daemon +files are more robust as impact of errors in configuration are limited to +the daemon in whose file the error is made. + +@end deffn -- cgit v1.2.1