From 831aeb9a87d9071829758caf11130aee5578f9c2 Mon Sep 17 00:00:00 2001 From: Juliusz Chroboczek Date: Tue, 7 Feb 2012 04:56:47 +0100 Subject: babeld: Replace the babeld.conf.sample file by one that actually works. --- babeld/babeld.conf.sample | 44 +++++++++++++------------------------------- 1 file changed, 13 insertions(+), 31 deletions(-) (limited to 'babeld/babeld.conf.sample') diff --git a/babeld/babeld.conf.sample b/babeld/babeld.conf.sample index bb2c1dbb..e1585c1d 100644 --- a/babeld/babeld.conf.sample +++ b/babeld/babeld.conf.sample @@ -1,31 +1,13 @@ -# placeholder -# This is an example. See documentation for more results. -# -# let 'eth0' be an interface. -# -# Remark: '#' and '!' are comments. -# NB, just for this example: -# each line at the same indentation is only dependant of the less level -# line. BUT the quagga parser is insensitive. - - -# setup the routing for Babel. -router babel #activate the Babel routing babeld.c - network eth0 #eth0 is match interface.c - redistribute kernel #(kernel|connected|static|ospf6|bgp) babel_zebra.c - no redistribute static #... - - -# setup each interface, one by one... -Interface eth0 #Set eth0 options interface.c -! wired #with wire interface.c - wireless #without wire (défaut) interface.c -! babel split-horizon #with Split-horizon interface.c - no babel split-horizon #without (defaut) interface.c - hello interval 4096 #default = 4096 (in miliseconds) interface.c - - -# setup the log destination. -# log stdout -# log stdout debugging -log file /var/log/quagga/babeld.log \ No newline at end of file +router babel +! network eth0 +! redistribute kernel +! no redistribute static + +!interface eth0 +! wired +! wireless +! babel split-horizon +! no babel split-horizon + +! log file /var/log/quagga/babeld.log +log stdout \ No newline at end of file -- cgit v1.2.1