From 718e3744195351130f4ce7dbe0613f4b3e23df93 Mon Sep 17 00:00:00 2001 From: paul Date: Fri, 13 Dec 2002 20:15:29 +0000 Subject: Initial revision --- bgpd/BGP4-MIB.txt | 929 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 929 insertions(+) create mode 100644 bgpd/BGP4-MIB.txt (limited to 'bgpd/BGP4-MIB.txt') diff --git a/bgpd/BGP4-MIB.txt b/bgpd/BGP4-MIB.txt new file mode 100644 index 00000000..c911316c --- /dev/null +++ b/bgpd/BGP4-MIB.txt @@ -0,0 +1,929 @@ + BGP4-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + IpAddress, Integer32, Counter32, Gauge32, mib-2 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF; + + bgp MODULE-IDENTITY + LAST-UPDATED "9902100000Z" + ORGANIZATION "IETF IDR Working Group" + CONTACT-INFO "E-mail: idr@merit.net + + Susan Hares (Editor) + Merit Network + 4251 Plymouth Road + Suite C + Ann Arbor, MI 48105-2785 + Tel: +1 734 936 2095 + Fax: +1 734 647 3185 + E-mail: skh@merit.edu + + Jeff Johnson (Editor) + RedBack Networks, Inc. + 1389 Moffett Park Drive + Sunnyvale, CA 94089-1134 + Tel: +1 408 548 3516 + Fax: +1 408 548 3599 + E-mail: jeff@redback.com" + DESCRIPTION + "The MIB module for BGP-4." + REVISION "9902100000Z" + DESCRIPTION + "Corrected duplicate OBJECT IDENTIFIER + assignment in the conformance information." + REVISION "9601080000Z" + DESCRIPTION + "1) Fixed the definitions of the traps to + make them equivalent to their initial + definition in RFC 1269. + 2) Added compliance and conformance info." + ::= { mib-2 15 } + + bgpVersion OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vector of supported BGP protocol version + numbers. Each peer negotiates the version + from this vector. Versions are identified + via the string of bits contained within this + object. The first octet contains bits 0 to + 7, the second octet contains bits 8 to 15, + and so on, with the most significant bit + referring to the lowest bit number in the + octet (e.g., the MSB of the first octet + refers to bit 0). If a bit, i, is present + and set, then the version (i+1) of the BGP + is supported." + ::= { bgp 1 } + + bgpLocalAs OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local autonomous system number." + ::= { bgp 2 } + + + + -- BGP Peer table. This table contains, one entry per BGP + -- peer, information about the BGP peer. + + bgpPeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF BgpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "BGP peer table. This table contains, + one entry per BGP peer, information about the + connections with BGP peers." + ::= { bgp 3 } + + bgpPeerEntry OBJECT-TYPE + SYNTAX BgpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing information about the + connection with a BGP peer." + INDEX { bgpPeerRemoteAddr } + ::= { bgpPeerTable 1 } + + BgpPeerEntry ::= SEQUENCE { + bgpPeerIdentifier + IpAddress, + bgpPeerState + INTEGER, + bgpPeerAdminStatus + INTEGER, + bgpPeerNegotiatedVersion + Integer32, + bgpPeerLocalAddr + IpAddress, + bgpPeerLocalPort + INTEGER, + bgpPeerRemoteAddr + IpAddress, + bgpPeerRemotePort + INTEGER, + bgpPeerRemoteAs + INTEGER, + bgpPeerInUpdates + Counter32, + bgpPeerOutUpdates + Counter32, + bgpPeerInTotalMessages + Counter32, + bgpPeerOutTotalMessages + Counter32, + bgpPeerLastError + OCTET STRING, + bgpPeerFsmEstablishedTransitions + Counter32, + bgpPeerFsmEstablishedTime + Gauge32, + bgpPeerConnectRetryInterval + INTEGER, + bgpPeerHoldTime + INTEGER, + bgpPeerKeepAlive + INTEGER, + bgpPeerHoldTimeConfigured + INTEGER, + bgpPeerKeepAliveConfigured + INTEGER, + bgpPeerMinASOriginationInterval + INTEGER, + bgpPeerMinRouteAdvertisementInterval + INTEGER, + bgpPeerInUpdateElapsedTime + Gauge32 + } + + bgpPeerIdentifier OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP Identifier of this entry's BGP peer." + ::= { bgpPeerEntry 1 } + + bgpPeerState OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + connect(2), + active(3), + opensent(4), + openconfirm(5), + established(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP peer connection state." + ::= { bgpPeerEntry 2 } + + bgpPeerAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + stop(1), + start(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired state of the BGP connection. A + transition from 'stop' to 'start' will cause + the BGP Start Event to be generated. A + transition from 'start' to 'stop' will cause + the BGP Stop Event to be generated. This + parameter can be used to restart BGP peer + connections. Care should be used in providing + write access to this object without adequate + authentication." + ::= { bgpPeerEntry 3 } + + bgpPeerNegotiatedVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The negotiated version of BGP running between + the two peers." + ::= { bgpPeerEntry 4 } + + bgpPeerLocalAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local IP address of this entry's BGP + connection." + ::= { bgpPeerEntry 5 } + + bgpPeerLocalPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local port for the TCP connection between + the BGP peers." + ::= { bgpPeerEntry 6 } + + bgpPeerRemoteAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote IP address of this entry's BGP + peer." + ::= { bgpPeerEntry 7 } + + bgpPeerRemotePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote port for the TCP connection between + the BGP peers. Note that the objects + bgpPeerLocalAddr, bgpPeerLocalPort, + bgpPeerRemoteAddr and bgpPeerRemotePort + provide the appropriate reference to the + standard MIB TCP connection table." + ::= { bgpPeerEntry 8 } + + bgpPeerRemoteAs OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote autonomous system number." + ::= { bgpPeerEntry 9 } + + bgpPeerInUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of BGP UPDATE messages received on + this connection. This object should be + initialized to zero (0) when the connection is + established." + ::= { bgpPeerEntry 10 } + + bgpPeerOutUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of BGP UPDATE messages transmitted + on this connection. This object should be + initialized to zero (0) when the connection is + established." + ::= { bgpPeerEntry 11 } + + bgpPeerInTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of messages received from the + remote peer on this connection. This object + should be initialized to zero when the + connection is established." + ::= { bgpPeerEntry 12 } + + bgpPeerOutTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of messages transmitted to + the remote peer on this connection. This object + should be initialized to zero when the + connection is established." + ::= { bgpPeerEntry 13 } + + bgpPeerLastError OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last error code and subcode seen by this + peer on this connection. If no error has + occurred, this field is zero. Otherwise, the + first byte of this two byte OCTET STRING + contains the error code, and the second byte + contains the subcode." + ::= { bgpPeerEntry 14 } + + bgpPeerFsmEstablishedTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of times the BGP FSM + transitioned into the established state." + ::= { bgpPeerEntry 15 } + + bgpPeerFsmEstablishedTime OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This timer indicates how long (in seconds) this + peer has been in the Established state or how long + since this peer was last in the Established state. + It is set to zero when a new peer is configured or + the router is booted." + ::= { bgpPeerEntry 16 } + + bgpPeerConnectRetryInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the ConnectRetry + timer. The suggested value for this timer is + 120 seconds." + ::= { bgpPeerEntry 17 } + + bgpPeerHoldTime OBJECT-TYPE + SYNTAX INTEGER ( 0 | 3..65535 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time interval in seconds for the Hold Timer + established with the peer. The value of this + object is calculated by this BGP speaker by + using the smaller of the value in + bgpPeerHoldTimeConfigured and the Hold Time + received in the OPEN message. This value + must be at lease three seconds if it is not + zero (0) in which case the Hold Timer has + not been established with the peer, or, the + value of bgpPeerHoldTimeConfigured is zero (0)." + ::= { bgpPeerEntry 18 } + + bgpPeerKeepAlive OBJECT-TYPE + SYNTAX INTEGER ( 0 | 1..21845 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time interval in seconds for the KeepAlive + timer established with the peer. The value of + this object is calculated by this BGP speaker + such that, when compared with bgpPeerHoldTime, + it has the same proportion as what + bgpPeerKeepAliveConfigured has when compared + with bgpPeerHoldTimeConfigured. If the value + of this object is zero (0), it indicates that + the KeepAlive timer has not been established + with the peer, or, the value of + bgpPeerKeepAliveConfigured is zero (0)." + ::= { bgpPeerEntry 19 } + + bgpPeerHoldTimeConfigured OBJECT-TYPE + SYNTAX INTEGER ( 0 | 3..65535 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the Hold Time + configured for this BGP speaker with this peer. + This value is placed in an OPEN message sent to + this peer by this BGP speaker, and is compared + with the Hold Time field in an OPEN message + received from the peer when determining the Hold + Time (bgpPeerHoldTime) with the peer. This value + must not be less than three seconds if it is not + zero (0) in which case the Hold Time is NOT to be + established with the peer. The suggested value for + this timer is 90 seconds." + ::= { bgpPeerEntry 20 } + + bgpPeerKeepAliveConfigured OBJECT-TYPE + SYNTAX INTEGER ( 0 | 1..21845 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the KeepAlive timer + configured for this BGP speaker with this peer. + The value of this object will only determine the + KEEPALIVE messages' frequency relative to the value + specified in bgpPeerHoldTimeConfigured; the actual + time interval for the KEEPALIVE messages is + indicated by bgpPeerKeepAlive. A reasonable + maximum value for this timer would be configured to + be one third of that of bgpPeerHoldTimeConfigured. + If the value of this object is zero (0), no + periodical KEEPALIVE messages are sent to the peer + after the BGP connection has been established. The + suggested value for this timer is 30 seconds." + ::= { bgpPeerEntry 21 } + + bgpPeerMinASOriginationInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + MinASOriginationInterval timer. + The suggested value for this timer is 15 seconds." + ::= { bgpPeerEntry 22 } + + bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + MinRouteAdvertisementInterval timer. + The suggested value for this timer is 30 seconds." + ::= { bgpPeerEntry 23 } + + bgpPeerInUpdateElapsedTime OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Elapsed time in seconds since the last BGP + UPDATE message was received from the peer. + Each time bgpPeerInUpdates is incremented, + the value of this object is set to zero (0)." + ::= { bgpPeerEntry 24 } + + + + bgpIdentifier OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP Identifier of local system." + ::= { bgp 4 } + + + + -- Received Path Attribute Table. This table contains, + -- one entry per path to a network, path attributes + -- received from all peers running BGP version 3 or less. + -- This table is obsolete, having been replaced in + -- functionality with the bgp4PathAttrTable. + + bgpRcvdPathAttrTable OBJECT-TYPE + SYNTAX SEQUENCE OF BgpPathAttrEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "The BGP Received Path Attribute Table contains + information about paths to destination networks + received from all peers running BGP version 3 or + less." + ::= { bgp 5 } + + bgpPathAttrEntry OBJECT-TYPE + SYNTAX BgpPathAttrEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "Information about a path to a network." + INDEX { bgpPathAttrDestNetwork, + bgpPathAttrPeer } + ::= { bgpRcvdPathAttrTable 1 } + + BgpPathAttrEntry ::= SEQUENCE { + bgpPathAttrPeer + IpAddress, + bgpPathAttrDestNetwork + IpAddress, + bgpPathAttrOrigin + INTEGER, + bgpPathAttrASPath + OCTET STRING, + bgpPathAttrNextHop + IpAddress, + bgpPathAttrInterASMetric + Integer32 + } + + bgpPathAttrPeer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The IP address of the peer where the path + information was learned." + ::= { bgpPathAttrEntry 1 } + + bgpPathAttrDestNetwork OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The address of the destination network." + ::= { bgpPathAttrEntry 2 } + + bgpPathAttrOrigin OBJECT-TYPE + SYNTAX INTEGER { + igp(1),-- networks are interior + egp(2),-- networks learned via EGP + incomplete(3) -- undetermined + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The ultimate origin of the path information." + ::= { bgpPathAttrEntry 3 } + + bgpPathAttrASPath OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The set of ASs that must be traversed to reach + the network. This object is probably best + represented as SEQUENCE OF INTEGER. For SMI + compatibility, though, it is represented as + OCTET STRING. Each AS is represented as a pair + of octets according to the following algorithm: + + first-byte-of-pair = ASNumber / 256; + second-byte-of-pair = ASNumber & 255;" + ::= { bgpPathAttrEntry 4 } + + bgpPathAttrNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The address of the border router that should + be used for the destination network." + ::= { bgpPathAttrEntry 5 } + + bgpPathAttrInterASMetric OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The optional inter-AS metric. If this + attribute has not been provided for this route, + the value for this object is 0." + ::= { bgpPathAttrEntry 6 } + + + + -- BGP-4 Received Path Attribute Table. This table contains, + -- one entry per path to a network, path attributes + -- received from all peers running BGP-4. + + bgp4PathAttrTable OBJECT-TYPE + SYNTAX SEQUENCE OF Bgp4PathAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The BGP-4 Received Path Attribute Table contains + information about paths to destination networks + received from all BGP4 peers." + ::= { bgp 6 } + + bgp4PathAttrEntry OBJECT-TYPE + SYNTAX Bgp4PathAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a path to a network." + INDEX { bgp4PathAttrIpAddrPrefix, + bgp4PathAttrIpAddrPrefixLen, + bgp4PathAttrPeer } + ::= { bgp4PathAttrTable 1 } + + Bgp4PathAttrEntry ::= SEQUENCE { + bgp4PathAttrPeer + IpAddress, + bgp4PathAttrIpAddrPrefixLen + INTEGER, + bgp4PathAttrIpAddrPrefix + IpAddress, + bgp4PathAttrOrigin + INTEGER, + bgp4PathAttrASPathSegment + OCTET STRING, + bgp4PathAttrNextHop + IpAddress, + bgp4PathAttrMultiExitDisc + INTEGER, + bgp4PathAttrLocalPref + INTEGER, + bgp4PathAttrAtomicAggregate + INTEGER, + bgp4PathAttrAggregatorAS + INTEGER, + bgp4PathAttrAggregatorAddr + IpAddress, + bgp4PathAttrCalcLocalPref + INTEGER, + bgp4PathAttrBest + INTEGER, + bgp4PathAttrUnknown + OCTET STRING + } + + bgp4PathAttrPeer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the peer where the path + information was learned." + ::= { bgp4PathAttrEntry 1 } + bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE + SYNTAX INTEGER (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Length in bits of the IP address prefix in the + Network Layer Reachability Information field." + ::= { bgp4PathAttrEntry 2 } + + bgp4PathAttrIpAddrPrefix OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An IP address prefix in the Network Layer + Reachability Information field. This object + is an IP address containing the prefix with + length specified by bgp4PathAttrIpAddrPrefixLen. + Any bits beyond the length specified by + bgp4PathAttrIpAddrPrefixLen are zeroed." + ::= { bgp4PathAttrEntry 3 } + + bgp4PathAttrOrigin OBJECT-TYPE + SYNTAX INTEGER { + igp(1),-- networks are interior + egp(2),-- networks learned via EGP + incomplete(3) -- undetermined + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ultimate origin of the path information." + ::= { bgp4PathAttrEntry 4 } + + bgp4PathAttrASPathSegment OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence of AS path segments. Each AS + path segment is represented by a triple + . + + The type is a 1-octet field which has two + possible values: + 1 AS_SET: unordered set of ASs a + route in the UPDATE message + has traversed + 2 AS_SEQUENCE: ordered set of ASs + a route in the UPDATE message + has traversed. + + The length is a 1-octet field containing the + number of ASs in the value field. + + The value field contains one or more AS + numbers, each AS is represented in the octet + string as a pair of octets according to the + following algorithm: + + first-byte-of-pair = ASNumber / 256; + second-byte-of-pair = ASNumber & 255;" + ::= { bgp4PathAttrEntry 5 } + + bgp4PathAttrNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of the border router that should + be used for the destination network." + ::= { bgp4PathAttrEntry 6 } + + bgp4PathAttrMultiExitDisc OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This metric is used to discriminate between + multiple exit points to an adjacent autonomous + system. A value of -1 indicates the absence of + this attribute." + ::= { bgp4PathAttrEntry 7 } + + bgp4PathAttrLocalPref OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The originating BGP4 speaker's degree of + preference for an advertised route. A value of + -1 indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 8 } + + bgp4PathAttrAtomicAggregate OBJECT-TYPE + SYNTAX INTEGER { + lessSpecificRrouteNotSelected(1), + lessSpecificRouteSelected(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Whether or not a system has selected + a less specific route without selecting a + more specific route." + ::= { bgp4PathAttrEntry 9 } + + bgp4PathAttrAggregatorAS OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The AS number of the last BGP4 speaker that + performed route aggregation. A value of zero (0) + indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 10 } + + bgp4PathAttrAggregatorAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the last BGP4 speaker that + performed route aggregation. A value of + 0.0.0.0 indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 11 } + + bgp4PathAttrCalcLocalPref OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The degree of preference calculated by the + receiving BGP4 speaker for an advertised route. + A value of -1 indicates the absence of this + attribute." + ::= { bgp4PathAttrEntry 12 } + + bgp4PathAttrBest OBJECT-TYPE + SYNTAX INTEGER { + false(1),-- not chosen as best route + true(2) -- chosen as best route + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of whether or not this route + was chosen as the best BGP4 route." + ::= { bgp4PathAttrEntry 13 } + + bgp4PathAttrUnknown OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "One or more path attributes not understood + by this BGP4 speaker. Size zero (0) indicates + the absence of such attribute(s). Octets + beyond the maximum size, if any, are not + recorded by this object." + ::= { bgp4PathAttrEntry 14 } + + + -- Traps. + + -- note that in RFC 1657, bgpTraps was incorrectly + -- assigned a value of { bgp 7 }, and each of the + -- traps had the bgpPeerRemoteAddr object inappropriately + -- removed from their OBJECTS clause. The following + -- definitions restore the semantics of the traps as + -- they were initially defined in RFC 1269. + + -- { bgp 7 } is unused + + bgpTraps OBJECT IDENTIFIER ::= { bgp 0 } + + bgpEstablished NOTIFICATION-TYPE + OBJECTS { bgpPeerRemoteAddr, + bgpPeerLastError, + bgpPeerState } + STATUS current + DESCRIPTION + "The BGP Established event is generated when + the BGP FSM enters the ESTABLISHED state." + ::= { bgpTraps 1 } + + bgpBackwardTransition NOTIFICATION-TYPE + OBJECTS { bgpPeerRemoteAddr, + bgpPeerLastError, + bgpPeerState } + STATUS current + DESCRIPTION + "The BGPBackwardTransition Event is generated + when the BGP FSM moves from a higher numbered + state to a lower numbered state." + ::= { bgpTraps 2 } + + -- conformance information + + bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 } + bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 } + bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 } + + -- compliance statements + + bgpMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which + implement the BGP4 mib." + MODULE -- this module + MANDATORY-GROUPS { bgp4MIBGlobalsGroup, + bgp4MIBPeerGroup, + bgp4MIBPathAttrGroup, + bgp4MIBNotificationGroup } + ::= { bgpMIBCompliances 1 } + + -- units of conformance + + bgp4MIBGlobalsGroup OBJECT-GROUP + OBJECTS { bgpVersion, + bgpLocalAs, + bgpIdentifier } + STATUS current + DESCRIPTION + "A collection of objects providing information + on global BGP state." + ::= { bgpMIBGroups 1 } + + bgp4MIBPeerGroup OBJECT-GROUP + OBJECTS { bgpPeerIdentifier, + bgpPeerState, + bgpPeerAdminStatus, + bgpPeerNegotiatedVersion, + bgpPeerLocalAddr, + bgpPeerLocalPort, + bgpPeerRemoteAddr, + bgpPeerRemotePort, + bgpPeerRemoteAs, + bgpPeerInUpdates, + bgpPeerOutUpdates, + bgpPeerInTotalMessages, + bgpPeerOutTotalMessages, + bgpPeerLastError, + bgpPeerFsmEstablishedTransitions, + bgpPeerFsmEstablishedTime, + bgpPeerConnectRetryInterval, + bgpPeerHoldTime, + bgpPeerKeepAlive, + bgpPeerHoldTimeConfigured, + bgpPeerKeepAliveConfigured, + bgpPeerMinASOriginationInterval, + bgpPeerMinRouteAdvertisementInterval, + bgpPeerInUpdateElapsedTime } + STATUS current + DESCRIPTION + "A collection of objects for managing + BGP peers." + ::= { bgpMIBGroups 2 } + + bgp4MIBRcvdPathAttrGroup OBJECT-GROUP + OBJECTS { bgpPathAttrPeer, + bgpPathAttrDestNetwork, + bgpPathAttrOrigin, + bgpPathAttrASPath, + bgpPathAttrNextHop, + bgpPathAttrInterASMetric } + STATUS obsolete + DESCRIPTION + "A collection of objects for managing BGP + path entries. + + This conformance group is obsolete, + replaced by bgp4MIBPathAttrGroup." + ::= { bgpMIBGroups 3 } + + bgp4MIBPathAttrGroup OBJECT-GROUP + OBJECTS { bgp4PathAttrPeer, + bgp4PathAttrIpAddrPrefixLen, + bgp4PathAttrIpAddrPrefix, + bgp4PathAttrOrigin, + bgp4PathAttrASPathSegment, + bgp4PathAttrNextHop, + bgp4PathAttrMultiExitDisc, + bgp4PathAttrLocalPref, + bgp4PathAttrAtomicAggregate, + bgp4PathAttrAggregatorAS, + bgp4PathAttrAggregatorAddr, + bgp4PathAttrCalcLocalPref, + bgp4PathAttrBest, + bgp4PathAttrUnknown } + STATUS current + DESCRIPTION + "A collection of objects for managing + BGP path entries." + ::= { bgpMIBGroups 4 } + + bgp4MIBNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { bgpEstablished, + bgpBackwardTransition } + STATUS current + DESCRIPTION + "A collection of notifications for signaling + changes in BGP peer relationships." + ::= { bgpMIBGroups 5 } + + END -- cgit v1.2.1