From 971a4497860b78dc3a133487faca75d513b433c7 Mon Sep 17 00:00:00 2001 From: paul Date: Fri, 20 Jun 2003 01:18:07 +0000 Subject: 2003-06-20 Paul Jakma * *.texi: update the docs a bit. Add some info about zebra.dishone.st in the overview. Add link-detect and update static routes section in zebra. Add write-config in vtysh. Update version handling and add passive-interface default for ripd. --- doc/main.texi | 69 ++++++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 13 deletions(-) (limited to 'doc/main.texi') diff --git a/doc/main.texi b/doc/main.texi index 7043bf14..81808e59 100644 --- a/doc/main.texi +++ b/doc/main.texi @@ -54,8 +54,17 @@ When program terminates, retain routes added by zebra. Up or down the current interface. @end deffn -@deffn {Interface Command} {ip address @var{address}} {} -Set ip address for the interface. +@deffn {Interface Command} {ip address @var{address/prefix}} {} +@deffnx {Interface Command} {ip6 address @var{address/prefix}} {} +@deffnx {Interface Command} {no ip address @var{address/prefix}} {} +@deffnx {Interface Command} {no ip6 address @var{address/prefix}} {} +Set the IPv4 or IPv6 address/prefix for the interface. +@end deffn + +@deffn {Interface Command} {ip address @var{address/prefix} secondary} {} +@deffnx {Interface Command} {no ip address @var{address/prefix} secondary} {} +Set the secondary flag for this address. This causes ospfd to not treat the +address as a distinct subnet. @end deffn @deffn {Interface Command} {description @var{description} ...} {} @@ -69,8 +78,16 @@ Enable or disables multicast flag for the interface. @deffn {Interface Command} {bandwidth <1-10000000>} {} @deffnx {Interface Command} {no bandwidth <1-10000000>} {} -Set bandwidth value to the interface. This is for calculating OSPF -cost. This command does not affect the actual device configuration. +Set bandwidth value of the interface in kilobits/sec. This is for +calculating OSPF cost. This command does not affect the actual device +configuration. +@end deffn + +@deffn {Interface Command} {link-detect} {} +@deffnx {Interface Command} {no link-detect} {} +Enable/disable link-detect on platforms which support this. Currently +only linux and with certain drivers - those which properly support the +IFF_RUNNING flag. @end deffn @node Static Route Commands, zebra Terminal Mode Commands, Interface Commands, Zebra @@ -84,15 +101,18 @@ defines static prefix and gateway. @var{network} is destination prefix with format of A.B.C.D/M. @var{gateway} is gateway for the prefix. When @var{gateway} is A.B.C.D format. It is taken as a IPv4 address gateway. Otherwise it -is treated as an interface name. +is treated as an interface name. If the interface name is @var{null0} then +zebra installs a blackhole route. @example ip route 10.0.0.0/8 10.0.0.2 ip route 10.0.0.0/8 ppp0 +ip route 10.0.0.0/8 null0 @end example First example defines 10.0.0.0/8 static route with gateway 10.0.0.2. -Second one defines the same prefix but with gateway to interface ppp0. +Second one defines the same prefix but with gateway to interface ppp0. The +third install a blackhole route. @end deffn @deffn Command {ip route @var{network} @var{netmask} @var{gateway}} {} @@ -103,13 +123,14 @@ format. @var{gateway} is same option as above command @example ip route 10.0.0.0 255.255.255.0 10.0.0.2 ip route 10.0.0.0 255.255.255.0 ppp0 +ip route 10.0.0.0 255.255.255.0 null0 @end example -This is a same setting using this statement. +These statements are equivalent to those in the previous example. @end deffn @deffn Command {ip route @var{network} @var{gateway} @var{distance}} {} - +Installs the route with the specified distance. @end deffn Multiple nexthop static route @@ -123,6 +144,10 @@ ip route 10.0.0.1/32 eth0 If there is no route to 10.0.0.2 and 10.0.0.3, and interface eth0 is reachable, then the last route is installed into the kernel. +If zebra has been compiled with multipath support, and both 10.0.0.2 and +10.0.0.3 are reachable, zebra will install a multipath route via both +nexthops, if the platform supports this. + @example zebra> show ip route S> 10.0.0.1/32 [1/0] via 10.0.0.2 inactive @@ -130,14 +155,32 @@ S> 10.0.0.1/32 [1/0] via 10.0.0.2 inactive * is directly connected, eth0 @end example -Floating static route - -@deffn Command {ipv6 route @var{network} @var{gateway}} {} +@example +ip route 10.0.0.0/8 10.0.0.2 +ip route 10.0.0.0/8 10.0.0.3 +ip route 10.0.0.0/8 null0 255 +@end example -@end deffn +This will install a multihop route via the specified next-hops if they are +reachable, as well as a high-metric blackhole route, which can be useful to +prevent traffic destined for a prefix to match less-specific routes (eg +default) should the specified gateways not be reachable. Eg: -@deffn Command {ipv6 route @var{network} @var{gateway} @var{distance}} {} +@example +zebra> show ip route 10.0.0.0/8 +Routing entry for 10.0.0.0/8 + Known via "static", distance 1, metric 0 + 10.0.0.2 inactive + 10.0.0.3 inactive + +Routing entry for 10.0.0.0/8 + Known via "static", distance 255, metric 0 + directly connected, Null0 +@end example +@deffn Command {ipv6 route @var{network} @var{gateway}} {} +@deffnx Command {ipv6 route @var{network} @var{gateway} @var{distance}} {} +These behave similarly to their ipv4 counterparts. @end deffn -- cgit v1.2.1