From 3998bfd76620a676fbd77f19c5c6ea80a4cc88d2 Mon Sep 17 00:00:00 2001 From: Paul Jakma Date: Tue, 19 Aug 2008 14:13:43 +0100 Subject: [trivia] Remove ChangeLog files, as this data is now maintained in SCM --- ripd/ChangeLog | 1217 -------------------------------------------------------- 1 file changed, 1217 deletions(-) delete mode 100644 ripd/ChangeLog (limited to 'ripd/ChangeLog') diff --git a/ripd/ChangeLog b/ripd/ChangeLog deleted file mode 100644 index 60baef5d..00000000 --- a/ripd/ChangeLog +++ /dev/null @@ -1,1217 +0,0 @@ -2008-05-29 Stephen Hemminger - - * ripd.c: (rip_auth_md5) fix bogus empty string test - -2008-03-13 Paul Jakma - - * ripd.c/rip_interface.c: Remove 0 entries from rip_msg - ri_version_msg struct message's, not needed with recent fixes - to mes_lookup. - -2007-04-27 Andrew J. Schorr - - * ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now. - -2007-04-11 Emmanuel Vize - - * ripd.c: (rip_vty_out_uptime) Use new thread_timer_remain_second - to display properly the route timeout, displayed by "show ip rip" - -2007-03-21 Andrew J. Schorr - - * ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second - function instead of rip_next_thread_timer to display the time until - next update properly. - (rip_next_thread_timer) Remove obsolete function. - -2006-12-12 Andrew J. Schorr - - * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID - macro to simplify logic. - (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does - not give a useful result if prefixlen is 32 (we require a peer - address in such cases). - * ripd.c: (rip_update_interface) Fix same bug as above. - -2006-09-11 Paul Jakma - - * ripd.c: (rip_read) remove gratuitous use of mid-function - declaration of vrecv, bug #278. - * rip_routemap.c: (route_set_metric) underflow check needs to - use signed, problem identified and diagnosed by Pavel - Nikiforov in bug #293. - -2006-06-29 Paul Jakma - - * rip_zebra: (general) convert redistribute commands to use - the auto-generated defines. - -2006-05-04 Paul Jakma - - * (general) Fixes for bugs #261 and 262. Thanks to - Konstantin V. Gavrilenko for the problem - reports, testing of a series of proposed patches and comment - on the proposed changes in behaviour. - * rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all - of the command before making any changes to configured state. - * ripd.c: (rip_read) RIP version control should be absolute and - always apply, fixes bug #261 by allowing RIPv1 to be disabled. - Fix bug #262: If authentication is enabled, then - unauthenticated packets should not be accepted. We do however - make an exception for RIPv1 REQUEST packets, to which we will - reply as RIPv1 can now be disabled fully, to allow ripd to - still provide routing /information/ to simple devices. - -2006-04-28 Andrew J. Schorr - - * ripd.c: (rip_update_process) Try to fix the logic for sending - an updated on each connected network. The new code will - attempt to send the update on each connected network, whereas - the previous code seemed to be attempting to avoid sending - more than one RIPv1 update on a given interface, but was coded - incorrectly. The actual effect of the old code was to send - an update only on the first connected address in the cases - where the interface is not multicast, or RIPv2 is not being used. - -2006-01-30 Alain Ritoux - - * ripd.c: correct bug that allowed route learnt through RIP to take - precedence over connectd routes - -2006-01-19 Paul Jakma - - * ripd.c: (main) return from main, not exit, cause it annoys SOS. - -2006-01-17 Paul Jakma - - * ripd.c: (rip_auth_md5) remove pdigest, not needed. - Use a local buffer for the auth_str, where it can be properly - nul padded. Do so, hence fixing MD5 authentication. - Key looked up via key ring should be used in preference to - the RIPv1 simple password, not other way around. - No need to copy around digests, we can reference them - directly. - The auth_len received can't be trusted, some implementations - lie (e.g. older ripd). - (rip_auth_md5_ah_write) rename len local variable to doff - to be consistent with other functions. - (rip_auth_header_write) add the missing return. - (rip_auth_md5_set) use the proper constructs to access stream. - -2005-10-30 Andrew J. Schorr - - * ripd.c: (rip_response_process) Instead of calling - rip_interface.c:if_valid_neighbor(), call the equivalent - library function if_lookup_address(). - * rip_interface.c: (if_valid_neighbor) Remove function, since it is - essentially equivalent to the if_lookup_address() library function. - * ripd.h: (if_valid_neighbor) Remove function declaration. - -2005-10-28 Paul Jakma - - * Makefile.am: Add rip_interface.h, or else it doesn't get - included in dists. - -2005-10-26 Paul Jakma - - * (general) static/extern functions and definitions. - * rip_interface.h: new file, export the public functions from - rip_interface.c - * ripd.c: Update couple more functions to specify void - explicitely. - -2005-10-17 Vincent Jardin - - * ripd.c: rip_create_socket() for each packet, it does not bind to the - proper interfaces because we forget to use the from address when - it is specified. - -2005-10-06 Alain Ritoux - - * rip_interface.c: Now the command "no ip rip split-horizon - poisoned-reverse" just inhibates the poisoned-reverse effects - but keep spli-horizon activ. - -2005-10-01 Andrew J. Schorr - - * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded - table str[]. Replace str[] with calls to new library function - zebra_route_string(). - * ripd.c: Remove local hard-coded table route_info[]. - (show_ip_rip) Replace uses of str[] with calls to new library - functions zebra_route_char and zebra_route_string. - -2005-09-29 Alain Ritoux - - * rip_snmp.c: rip2IfConfReceive() sends values in conformance - with RFC. Also PeerDomain is now set to a STRING type. - * ripd.h: rip_redistribute_add() API includes metric and distance - added field external_metric in routes. - * ripd.c: rip_redistribute_add() API i.e. stores metric and distance - Now allows a RIP-route to overcome a redistributed route coming - from a protocol with worse (higher) administrative distance - Metrics from redistribution are shown in show ip rip - * rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. - provide distance and metric - * rip_interface.c: adapt to the rip_redistribute_add() API - * rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage - rather a CMD_WARNING, because set metric ius shared with other - protocols using larger values (such as OSPF) - The match metric action takes first external metric if present - (from redistribution) then RIP metric. - -2005-09-28 Alain Ritoux - - * ripd.c: use new md5 API - -2005-08-16 Paul Jakma - - * ripd.c: (general) Fix previous commit, broke multicast bind and - hence setting of source port, which broke communication with - non-borken ripd. Fix removes more stuff from rip_interface.c - than it adds to ripd.c ;) - (rip_create_socket) the to argument really is a from argument, - rename it. Set the source port to RIP port unconditionally, it's - required. - (rip_send_packet) Set from address correctly for multicast. - (rip_output_process) trivial: num can be BSS specified, rather - than in body. - * rip_interface.c: (rip_interface_multicast_set) strip out - redundant stuff related to bind, which rip_create_socket does. - Just make it set the multicast socket option, as per the - interface concerned, no more. - -2005-06-03 Paul Jakma - - * ripd.c: (rip_create_socket) move it up so rip_send_packet - can use it too. Make it static. Remove the getservbyname stuff, - as RFC2453 3.9.2 says non-RIP port messages should be discarded, - quagga doesnt accept them, no need to lookup port. - Take a 'to' argument, if socket should be bound to something else. - setsockopt_so_recvbuf might need privs, move it to the raised - privileges section. - dont forget to close the socket if bind fails. - (rip_send_packet) use strncpy, just in case (address is under - our control anyway, but still). - dont duplicate rip_create_socket - just use it. - (rip_create) rip_create_socket takes an argument now, modify. - -2005-06-01 Paul Jakma - - * rip_interface.c: Fix authentication, no-auth impossible to specify - (rip_interface_new) default to RIP_NO_AUTH - (rip_interface_reset) ditto - (rip_interface_config_write) write out config for simple - -2005-05-29 Paul Jakma - - * ripd.c: (rip_output_process) fix error which crept in my - previous rip auth untanglement commit - it had become impossible - to not have authentication (even for v1). - -2005-05-28 Hasso Tepper - - * rip_routemap.c: Fix set_metric_addsub_cmd help, it's not about BGP - metric. - -2005-05-26 Hasso Tepper - - * rip_routemap.c: In case of '0.0.0.0' used as 'nexthop', use sender - address as nexthop in routemap. - -2005-05-26 Hasso Tepper - - * rip_routemap.c: Make "match interface" routemap command match both - - in and out interfaces. - -2005-05-11 Andrew J. Schorr - - * rip_interface.c (rip_interface_add): Need to call - rip_passive_interface_apply (was already calling it in - rip_interface_up). - -2005-04-11 Andrew J. Schorr - - * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, - rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send - from zclient->sock to zclient. - -2005-04-02 Andrew J. Schorr - - * rip_interface.c: (rip_interface_delete) After deleting, set - ifp->ifindex to IFINDEX_INTERNAL. - -2005-02-04 Paul Jakma - - * ripd.c: Untangle the construction of RIP auth data. - (rip_auth_prepare_str_send) new helper function, prepare - correct key string. - (rip_auth_simple_write) new helper, write out the - rip simple password auth psuedo-RTE. - (rip_auth_md5_ah_write) new helper, write out the - MD5 auth-header psuedo-RTE. - (rip_auth_header_write) new helper, write out correct - auth header data / psuedo-RTE. - (rip_auth_md5_set) rip out the memmove and writing of the - auth header psuedo-RTE. So that all that is left is to - write the trailing auth digest, and update digest offset - field in the original header. - (rip_write_rte) rip out writing of RIP header, writing of - simple auth data psuedo-RTE. Make it do what its name suggests, - write out actual RTEs. - (rip_output_process) remove the incorrect additional decrements - of rtemax. Prepare the auth_str, which simple or MD5 auth will - need. Move write out of RIP header and auth data to inside the - loop. Adjust paramaters as required. - -2005-01-30 Andrew J. Schorr - - * ripd.c: (rip_create_socket) Replace perror with zlog_err. - -2005-01-30 Andrew J. Schorr - - * ripd.c: (rip_create_socket) Save errno before calling - ripd_privs.change. - -2005-01-04 Andrew J. Schorr - - * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. - -2004-12-15 Andrew J. Schorr - - * ripd.c: (rip_read) Improve 2 error messages to show the source of - the packet when the lookup fails. - -2004-12-08 Andrew J. Schorr - - * *.c: Change level of debug messages to LOG_DEBUG. - -2004-12-07 Andrew J. Schorr - - * rip_main.c: (main) The 2nd argument to openzlog has been removed. - -2004-12-03 Andrew J. Schorr - - * rip_main.c: (sigint) Use zlog_notice for termination message. - (main) Add a startup announcement using zlog_notice. - -2004-11-25 Hasso Tepper - - * rip_main.c: Make group to run as configurable. - -2004-10-22 Paul Jakma - - * ripd.c: Collapse redundant passing of various address structs, - struct interface and struct connected as arguments to functions - down to two key arguments, namely struct connected and, possibly, - address of source/destination. Testing for RIPv1 would be useful. - (rip_read) lookup struct connected for the received packet, pass - it on. - * rip_interface.c: With previous changes, we no longer have to tread - carefully with struct connected, as it will always be there and - valid. - -2004-10-19 Andrew J. Schorr - - * ripd.c: (rip_update_interface) if connected->destination is NULL, - get the broadcast address with ipv4_broadcast_addr() - * rip_interface.c: (rip_interface_multicast_set) - connected->destination may be NULL. Improve message if - setsockopt_multicast_ipv4 fails. Improve message if bind fails. - (rip_request_interface_send) If connected->destination is NULL, - get the broadcast address with ipv4_broadcast_addr(). - (if_valid_neighbor) Handle PtP subnet addressing properly. - Speed up code by using prefix_match properly. - -2004-10-13 Hasso Tepper - - * ripd_snmp.c: Remove defaults used to initialize smux connection to - snmpd. Connection is initialized only if smux peer is configured. - -2004-10-11 Hasso Tepper - - * *.c: Make more strings const. - -2004-10-08 Hasso Tepper - - * *.c: Fix compiler warnings: make strings const, signed -> unsigned - etc. - -2004-09-26 Hasso Tepper - - * ripd.c: Fix compiler warning. - -2004-09-23 Hasso Tepper - - * *.[c|h]: list -> struct list *, listnode -> struct listnode *. - -2004-09-17 Paul Jakma - - * ripd.c: set receive buffer to a decent size, some systems have low - defaults. Problem noted and fix suggested by Stephan Schweizer - in [zebra 20967]. - -2004-08-19 Paul Jakma - - * rip_interface.c: (rip_interface_multicast_set) get rid - of extraneous if_pointopoint arg. ifp is accessible via connected. - pass connected->ifp->ifindex to setsockopt_multicast_ipv4. - * ripd.c: (rip_send_packet) update call to - rip_interface_multicast_set - * ripd.h: update rip_interface_multicast_set prototype - -2004-06-11 Sowmini Varadhan - - * ripd.c: (rip_distribute_update_all) distribute list hook - function pointer prototype requires struct prefix_list * arg. - (rip_distribute_update_all_wrapper) update to pass required arg, - NULL. - -2004-06-06 Paul Jakma - - * ripd.h: Add define for the RIPv2 Authentication Data family - Move the auth type defines up to where other defines live. - Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible - md5->auth_len size. Add md5_auth_len field to struct - rip_interface: (rip_interface_new) Init md5_auth_len to compatible - size. - (ip_rip_authentication_mode_cmd) Extended to handle setting - md5 auth-length. Appropriate aliases added. - (no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to - compatible size. - (rip_interface_config_write) Teach it about md5_auth_len. - _always_ write out the auth-length, so that everyone will get - the setting in their config file, and hence allow for a future - change of default for md5_auth_len to be less painful - every md5 - user will have this setting in their config file. - ripd.c: (rip_packet_dump) Change nasty hard coded constants to - symbolic defines. Change various tests of 'ntoh.(variable) == - constant' to test 'variable == ntoh.(constant)'. Clean up - indentation on some long lines. - (rip_auth_simple_password) ditto. - (rip_auth_md5) ditto, also add length argument and sanity check - md5 data offset field. Sanity check md5 auth length, accept RFC - or old-ripd/cisco lengths. - (rip_auth_md5_set) as per (rip_packet_dump), also write out - the configured md5 auth length for the interface (old-ripd or rfc) - (rip_read) as per (rip_packet_dump) - (rip_write_rte) ditto - (rip_response_process) ditto - (rip_write_rte) ditto - -2004-06-04 JJ Ludman - - * ripd.c: Interoperability fix. Correct value for MD5 auth length - is 16. Accept packets with this set to >= 16, and set to 16 - ourselves. - -2004-05-31 Sowmini Varadhan - - * ripd.c: Fixup compile warnings - * rip_routemap.c: Ditto - -2004-05-08 Paul Jakma - - * rip_zebra.c: sync with zclient changes. - * rip_interface.c: ditto. - -2004-05-05 Anthony.Golia@morganstanley.com - - * ripd.c: (rip_update_jitter) Bound jitter to a more sensible - value, eg 1/4 of update time. - -2004-05-03 Paul Jakma - - * ripd.c: (rip_rte_process) fix typo in merge of previous patch - and run function through indent. - -2004-03-19 Jean-Yves Simon - - * ripd.c: (rip_rte_process) make ripd also check on - administrative distance of his own links to update routes. - -2004-03-18 sowmini.varadhan@sun.com - - * ripd.c: rip_send_packet can get null connected address when - called in response to a unicast rip-request. Handle correctly. - -2004-03-03 Krzysztof Oledzki - - * ripd.c: fix "show ip rip" and per interface rip version selection. - -2004-01-23 sowmini.varadhan@sun.com - - * rip_interface.c: obsolete unbind code in - rip_interface_multicast_set, and instead do the more portable - (though slower) method of creating a socket for each outgoing packet - and binding the source address on the new socket. - * rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that - source address is determined by the caller of rip_request_send for - ripv1 packets and non-multicast interfaces (rip_request_send loops - over all connected address in all other cases). - * rip_send_packet: don't send packets with source set to - ZEBRA_IFA_SECONDARY connected addresses; improved debug messages; - -2003-06-07 Andrew J. Schorr - - * Allow ripd to receive RIPv1 - * add default as valid param to passive-interface command - -2003-05-25 Vincent Jardin - - * 6Wind patch merge. - -2003-04-19 Hasso Tepper - - * rip_routemap.c: sync daemon's route-map commands to have same - syntax - -2002-07-07 Kunihiro Ishiguro - - * zebra-0.93 released. - -2002-06-30 Kunihiro Ishiguro - - * ripd.c (rip_output_process): When outgoing interface is same as - next hop interface, announce RIPv2 next hop otherwise set next hop - to 0. Revert previous change then take 6WIND way. - -2001-09-14 Akihiro Mizutani - - * ripd.c: RIP enabled interface's route is advertised by default. - -2001-08-28 NOGUCHI Kay - - * rip_snmp.c (rip_ifaddr_delete): Add route_node_lookup() return - value check. - - * rip_interface.c (rip_multicast_leave): Fix bug of multiple IP - address on one interface multicast join/leave bug. - -2001-08-26 NOGUCHI Kay - - * rip_interface.c (no_rip_passive_interface): Add NO_STR. - -2001-08-19 Kunihiro Ishiguro - - * zebra-0.92a released. - -2001-08-15 Kunihiro Ishiguro - - * zebra-0.92 released. - -2001-06-17 Kunihiro Ishiguro - - * rip_routemap.c (route_match_ip_address_prefix_list): Add match - ip next-hop prefix-list WORD. - -2001-02-18 Kunihiro Ishiguro - - * rip_interface.c (rip_passive_interface_clean): Call - rip_passive_interface_apply_all. - -2001-02-12 Kunihiro Ishiguro - - * ripd.c (rip_response_process): Multicast address nexthop check - is moved from rip_nexthop_check. - -2001-02-08 Matthew Grant - - * rip_interface.c (ipv4_multicast_join): Use - setsockopt_multicast_ipv4. - (ipv4_multicast_leave): Likewise. - (rip_if_ipv4_address_check): Interface which has IPv4 address can - be enabled. - -2001-02-08 Kunihiro Ishiguro - - * rip_interface.c (rip_interface_delete): To support pseudo - interface do not free interface structure. - * ripd.c (rip_output_process): If output interface is in simple - password authentication mode, we need space for authentication - data. - -2001-02-01 Kunihiro Ishiguro - - * ripd.c (rip_nexthop_check): Fix multicast address nexthop check. - - * zebra-0.91 is released. - -2001-01-27 Kunihiro Ishiguro - - * ripd.c (show_ip_rip): Show metric infinity route's timeout. - (rip_rte_process): If current route is metric infinity, route is - replaced with received rte. - (rip_redistribute_delete): When redistribute route is deleted, - perform poisoned reverse. - (rip_redistribute_withdraw): Likewise. - -2001-01-25 Kunihiro Ishiguro - - * ripd.c (rip_response_process): RIPv2 routing table entry with - non directly reachable nexthop was dropped. The code is changed - to treat it as 0.0.0.0 nexthop. - (rip_destination_check): Check net 0 address destination. - (rip_nexthop_check): New function for checking nexthop address - validity. - -2001-01-15 Kunihiro Ishiguro - - * ripd.c (rip_request_process): Triggered update only send changed - route. - - * rip_interface.c: Delete RIP_API part until new implementation - comes out. - - * rip_snmp.: Likewise. - - * rip_zebra.c: Likewise. - - * ripd.c: Likewise. - -2001-01-11 Kunihiro Ishiguro - - * rip_interface.c (rip_if_init): Remove HAVE_IF_PSEUDO part. - -2001-01-09 Kunihiro Ishiguro - - * zebra-0.90 is released. - -2001-01-01 Kunihiro Ishiguro - - * ripd.h (RIP_VTYSH_PATH): Change "/tmp/ripd" to "/tmp/.ripd". - -2000-12-25 David Lipovkov - - * ripd.c (rip_rte_process): When a route is in garbage collection - process (invalid with metric 16) and a router receives the same - route with valid metric then route was not installed into zebra - rib, but only into ripd rib. Moreover , it will never get into - zebra rib, because ripd wrongly assumes it's already there. - (rip_redistribute_add): When doing redistribute into rip other - route (e.g. connected) and the same route exists in ripd rib we - changed it in place - bug. Now we don't forget to remove old route - from zebra. - (rip_timeout): When removing routes from zebra I made sure that we - remove route with the metric we have in zebra and not the new - one. It doesn't make a difference now,but could be significant - when multipath support is done. - -2000-12-25 David Lipovkov - - * rip_zebra.c (rip_metric_unset): Fix bug of metric value unset. - -2000-11-25 Frank van Maarseveen - - * ripd.c (rip_request_process): Check passive flag of the - interface. - -2000-11-23 Frank van Maarseveen - - * rip_interface.c (rip_multicast_join): When IP_ADD_MEMBERSHIP - failed do not set runnning flag to the interface. - -2000-11-16 Kunihiro Ishiguro - - * ripd.c (rip_output_process): Memory leak related classfull - network generation is fixed. - -2000-11-16 Frank van Maarseveen - - * rip_interface.c (if_check_address): Obsolete pointopoint address - check is removed. - -2000-11-02 Frank van Maarseveen - - * rip_interface.c (if_check_address): Add pointopoint address - check. - (rip_interface_up): Add check for passive interface when interface - goes up. - -2000-10-23 Jochen Friedrich - - * rip_snmp.c: rip_oid and ripd_oid are used in smux_open after it - is registered. So those variables must be static. - -2000-10-19 Kunihiro Ishiguro - - * rip_interface.c: Change to "no ip rip (send|receive)" command - accept version number argument. - -2000-10-17 Akihiro Mizutani - - * rip_routemap.c (route_set_ip_nexthop_compile): Change "match ip - next-hop" from IP address to access-list name. - -2000-10-17 Kunihiro Ishiguro - - * rip_peer.c: Change ot use linklist.c instaed of newlist.c. - -2000-10-16 Kunihiro Ishiguro - - * rip_offset.c: Change to use linklist.c instead of newlist.c. - -2000-10-02 Kunihiro Ishiguro - - * zebra-0.89 is released. - -2000-09-26 Akihiro Mizutani - - * rip_routemap.c (match_ip_nexthop): Add next-hop format check. - -2000-09-18 David Lipovkov - - * rip_interface.c (ripd_api_get_if_rx_version): Corrects rip SNMP - and rip API functions dealing with rip version. - - * rip_snmp.c (Status_Valid): SNMPv2-TC TEXTUAL-CONVENTION. - -2000-09-10 Kunihiro Ishiguro - - * rip_snmp.c (rip2IfLookup): Use rip_ifaddr_lookup_next() instead - of rip_if_lookup_next(). - - * rip_interface.c (rip_enable_network_lookup): Interface enable - check by interface's address with /32 prefix. - - * ripd.c (rip_read): When RIP is configured with authentication - and no authentication in incoming packet, drop the packet. - - * rip_interface.c (rip_interface_reset): RIP_AUTH_SIMPLE_PASSWORD - is default mode of authentication. - (rip_interface_new): Likewise. - (no_ip_rip_authentication_mode): Likewise. - - * ripd.c (rip_read): Likewise. - -2000-09-10 David Lipovkov - - * rip_snmp.c: Set ASN_INTEGER v->type where it is needed. - -2000-09-08 Kunihiro Ishiguro - - * ripd.c (rip_auth_simple_password): Simple password - authentication using key-chain. - (rip_write_rte): Likewise. - - * rip_interface.c (ip_rip_authentication_key_chain): Add check for - authentication string configuration. - -2000-09-08 Akihiro Mizutani - - * ripd.c (rip_write_rte): Add check for ri->auth_str. - -2000-09-07 Kunihiro Ishiguro - - * ripd_api.h: New file is added. - -2000-08-22 Kunihiro Ishiguro - - * ripd.c (rip_rte_process): rip_route_process() is renamed to - rip_rte_process() to clarify meanings of the function. - rip_route_process() is newly added to process RIP route selection. - -2000-08-18 Kunihiro Ishiguro - - * ripd.c (rip_incoming_filter): Extract incoming filter code to - function from rip_route_process(). Add check for all interface - filter. - (rip_outgoing_filter): Extract incoming filter code to function - from rip_output_process(). Add check for all interface filter. - - * rip_zebra.c (rip_redistribute_clean): Reset redistribute status - when "no router rip" is performed. - - * rip_interface.c (rip_interface_clean): Reset interface's RIP - enable status. - -2000-08-17 Kunihiro Ishiguro - - * ripd.c (rip_route_process): When metric infinity is received the - route is removed from service immediately. - (rip_timeout): Likewise. - (rip_garbage_collect): Do not delete route in garbage collection. - (rip_output_process): Check metric_out exceed metric infinity. - - * zebra-0.88 is released. - -2000-08-15 Kunihiro Ishiguro - - * ripd.c (rip_distance_apply): Unlock node when there is matched - node. - -2000-08-13 Akihiro Mizutani - - * rip_routemap.c (match_ip_nexthop): Add check for IP address - validness. - (no_set_metric): Add new ALIAS. - -2000-08-07 Kunihiro Ishiguro - - * ripd.h (struct rip ): Add distance. - -2000-08-05 Kunihiro Ishiguro - - * rip_zebra.c (rip_zebra_ipv4_add): Use new Zebra api to register - routes. Pass RIP metric value to zebra. - -2000-08-02 Kunihiro Ishiguro - - * rip_main.c (main): Make struct thread thread from global - variable to local variable in main. - -2000-08-06 Kunihiro Ishiguro - - * ripd.c (rip_packet_dump): Add MD5 authentication dump function. - (rip_auth_md5): RIP MD5 authentication packet receive works. - -2000-08-02 David Lipovkov - - * rip_interface.c (rip_if_init): Install interface "pseudo" - commands. - (rip_interface_delete): Do not call if_delete() when interface is - pseudo interface. - -2000-07-31 Kunihiro Ishiguro - - * rip_interface.c (ip_rip_authentication_mode): "ip rip - authentication mode (md5|text)" is added. - (ip_rip_authentication_key_chain): "ip rip authentication - key-chain KEY-CHAIN" is added. - (rip_interface_clean): Clean all interface configuration. - (rip_interface_reset): Reset all interface configuration. - (rip_clean_network): Clean rip_enable_network. - - * ripd.h (struct rip_interface): Add key_chain member. - - * ripd.c: Include md5-gnu.h. - -2000-07-30 Kunihiro Ishiguro - - * ripd.h (RIP_NO_AUTH): Change RIP_NO_AUTH value from 1 to 0. - - * ripd.c (rip_authentication): Use RIP_AUTH_SIMPLE_PASSWORD - instead of raw value 2. - (rip_write_rte): Likewise. - (rip_write_rte): Check ri->auth_type instead of ri->auth_str. - -2000-07-30 David Lipovkov - - * rip_interface.c (rip_if_down): Do not delete ZEBRA_ROUTE_KERNEL - route. - -2000-07-27 Kunihiro Ishiguro - - * ripd.c (rip_update_process): Add "passive-interface" command. - - * ripd.h (struct rip_interface): Add passive member to struct - rip_interface. - -2000-07-24 Kunihiro Ishiguro - - * rip_interface.c (rip_if_init): Multiple RIP routes for one - prefix change. The codes are enclosed by #ifdef NEW_RIP_TABLE. - -2000-07-24 Akihiro Mizutani - - * rip_interface.c (rip_if_init): Use install_default() for - INTERFACE_NODE. - -2000-07-24 Kunihiro Ishiguro - - * ripd.c: First update timer will be invoked in two seconds. - -2000-07-09 Jochen Friedrich - - * rip_snmp.c: Local function definitions to static. Add INTEGER - ASN_INTEGER and TIMETICKS ASN_TIMETICKS definition. - (rip2PeerLookup): Peer with domain lookup implemented. - (rip2PeerTable): Temporary disable RIP2PEERLASTUPDATE value - support due to unknown SNMP agent startup time. - -2000-07-05 Kunihiro Ishiguro - - * ripd.h: Sweep obsolete definitions. - - * rip_interface.c (rip_split_horizon): Add "ip split-horizon" - command. - - * ripd.c (rip_output_process): Remove split_horizon argument. - (rip_update_process): Likewise. - - * ripd.h (struct rip_interface): Add split_horizon flag to struct - rip_interface. - -2000-07-04 Akihiro Mizutani - - * ripd.c (rip_version): Change VERSION to <1-2>. - Add "no version" command. - -2000-07-03 Kunihiro Ishiguro - - * rip_zebra.c (rip_redistribute_type_metric): "redistribute TYPE - metric <0-16>" command is added. - - * rip_routemap.c (route_set_metric): Set metric_set when metric is - modified. - - * ripd.h (struct rip_info): To check route-map set metric or not, - new member metric_set is added to struct rip_info. - - * ripd.c (rip_route_process): Move metric handling code from - rip_response_process() to rip_route_process(). - (rip_output_process): Set output offset-list metric. - -2000-07-02 Kunihiro Ishiguro - - * rip_offset.c (rip_offset_list): New file for offset-list. - -2000-07-02 Akihiro Mizutani - - * ripd.h (struct rip ): Add default_metric. - - * ripd.c (rip_default_metric): "default-metric <1-16>" command is - added. - (config_write_rip): Change configuration order. - - * rip_zebra.c: Fix help strings. - -2000-07-02 David Lipovkov - - * rip_interface.c (rip_if_init): Add IF_DELETE_HOOK. - -2000-07-01 Kunihiro Ishiguro - - * ripd.c (rip_output_process): If specified route-map does not - exist, it treated as deny all. - -2000-06-30 Kunihiro Ishiguro - - * rip_routemap.c (rip_route_map_init): Call rip_route_map_update - when route-map is deleted. - -2000-06-28 Kunihiro Ishiguro - - * rip_routemap.c (set_metric): For consistency with bgpd's set - metric, value range is set to <0-4294967295>. - -2000-06-28 David Lipovkov - - * rip_routemap.c (rip_route_map_update): Add check for rip is - enabled or not for avoid core dump. - - * rip_debug.c (debug_rip_packet_direct): Fix bug of setting - rip_debug_packet flag. - -2000-06-13 David Lipovkov - - * rip_interface.c (rip_interface_delete): All work is done in - rip_if_down(). - -2000-06-06 Kunihiro Ishiguro - - * ripd.c (rip_redistribute_delete): Fix bug of missing - route_unlock_node() when redistribute route is not found. - -2000-06-05 Akihirof Mizutani - - * rip_debug.c (rip_debug_init): Disable show debugging in - VIEW_NODE like other protocol daemon. - - * rip_routemap.c: Change command argument to more comprehensive. - - METRIC -> <0-16> - IFNAME -> WORD - IP_ADDR -> A.B.C.D - ACCSESS_LIST -> WORD - -2000-06-05 David Lipovkov - - * rip_interface.c (rip_interface_delete): Delete all routes - include static and kernel through the interface , because even if - the interface is added again there is no guarantee that it will - get the same ifindex as before. - -2000-05-31 Akihirof Mizutani - - * rip_debug.c: Fix rip debug help string. - -2000-04-27 Mirko Karanovic - - * rip_interface.c (rip_interface_down): Remove interface from - multicast group when interface goes down. - -2000-04-03 David Lipovkov - - * rip_interface.c (rip_interface_down): Implemented rip functions - for interface up/down events: rip_interface_up() and - rip_interface_down() - -2000-03-16 David Lipovkov - - * rip_zebra.c (rip_zclient_init): Added rip functions for - interface up/down events. - -2000-02-15 Hidetoshi Shimokawa - - * ripd.c (rip_write_rte): "set metic" in route-map has no effect - for RIPv1 in ripd. It worked fine for RIPv2. - -2000-01-17 Kunihiro Ishiguro - - * ripd.c (show_ip_protocols_rip): Fix bug of "show ip protocls" - mis-display RIP version. - - * ripd.h (struct rip_peer): Add timeout thread to rip_peer - structure. - -2000-01-16 Kunihiro Ishiguro - - * rip_peer.c: Add new file for supporting RIP peer. - -1999-12-26 David Lipovkov - - * ripd.c (rip_authentication): RIP authantication string is 16 - bytes long. - -1999-12-10 Kunihiro Ishiguro - - * ripd.c (rip_read): Add check for minimum packet length. - Authentication check is moved from rip_process_response() to - rip_read(). Patch from David Lipovkov is - applied then add rte number check by Kunihiro Ishiguro - . - -1999-12-07 Kunihiro Ishiguro - - * ripd.c (rip_response_process): In case of packet is RIPv2 and - network is non zero and netmask is zero, apply netmask rule as - same as RIPv1. - -1999-11-06 Kunihiro Ishiguro - - * ripd.c (rip_timers): Fix bug of timers basic argument format. - -1999-11-03 Kunihiro Ishiguro - - * rip_snmp.c (rip2IfConfAddress): Forgot to include - RIP2IFCONFDOMAIN. - -1999-10-28 Kunihiro Ishiguro - - * ripd.h (struct rip_peer): New structure added. - -1999-10-26 Kunihiro Ishiguro - - * rip_zebra.c (rip_zebra_ipv4_add): Increment - rip_global_route_changes when route change occur. - (rip_zebra_ipv4_delete): Likewise. - - * ripd.c (rip_request_process): Increment rip_global_queries when - reply to the query is sent. - -1999-10-25 Kunihiro Ishiguro - - * rip_debug.c (rip_debug_reset): Reset function added. - - * ripd.c (rip_update_process): Logging bug is fixed. - -1999-10-10 Marc Boucher - - * ripd.c (config_write_rip): Add config_write_distribute() call. - -1999-09-29 Kunihiro Ishiguro - - * ripd.c (rip_distribute_update): Fix bug of access-list - prefix-list updates. - -1999-09-10 VOP - - * rip_zebra.c: Add redistribute route-map feature. - -1999-09-10 Kunihiro Ishiguro - - * ripd.c (rip_response_process): Add check for given prefix is - given mask applied one. - -1999-09-03 VOP - - * rip_interface.c (rip_interface_multicast_set): Bug fix about - setting multicast interface. - -1999-09-02 VOP - - * rip_routemap.c: New file added. - -1999-09-02 Kunihiro Ishiguro - - * ripd.c (show_ip_protocols_rip): Show next update time. - (show_ip_protocols_rip): Show redistribute information. - -1999-08-25 Kunihiro Ishiguro - - * RIPv2-MIB.txt: New file added. - - * rip_snmp.c: New file added. - -1999-08-24 Kunihiro Ishiguro - - * rip_interface.c (ip_rip_authentication_string): RIPv2 - authentication command is added. - -1999-08-23 Kunihiro Ishiguro - - * rip_interface.c (rip_interface_multicast_set): Process of - setting IP_MULTICAST_IF on specific interface. - - * ripd.c (rip_read): Add packet size check. - -1999-08-16 Kunihiro Ishiguro - - * ripd.c (rip_request_process): Fill in RIP_METRIC_INFINITY with - network byte order using htonl (). - (rip_response_process): Pass host byte order address to IN_CLASSC - and IN_CLASSB macro. - -1999-08-08 davidm@nbase.co.il (David Mozes) - - * rip_zebra.c (rip_zebra_read_ipv4): Fix split horizon problem. - -1999-07-03 Kunihiro Ishiguro - - * ripd.c (rip_timer_set): Function added. - -1999-07-01 Kunihiro Ishiguro - - * rip_debug.c: New file added. - rip_debug.h: New file added. - -1999-07-01 Rick Payne - - * rip_zebra.c (zebra_init): Install standard commands to - ZEBRA_NODE. - -1999-06-01 David Luyer - - * ripd.c (rip_process_route): Add support for RIP version 1. - -1999-05-29 Kunihiro Ishiguro - - * rip_zebra.c: Change to use lib/zclient.[ch]. - -1999-05-20 Carlos Alberto Barcenilla - - * ripd.c (rip_add_route): Change the existance route's metric check - to the condition specified by RFC2453. - -1999-05-17 Carlos Alberto Barcenilla - - * ripd.c (rip_process_route): Add the if metric to the route metric. - - * ripd.c (rip_add_route): Deleted add if metric to the route. - -1999-05-16 Carlos Alberto Barcenilla - - * rip_interface.c (if_valid_neighbor): New function. - - * ripd.c (rip_process_route): Added check whether the datagram - is from a valid neighbor. - -1999-05-15 Kunihiro Ishiguro - - * ripd.c (rip_process_route): Set interface pointer to rinfo. - -1999-05-15 Carlos Alberto Barcenilla - - * ripd.c (rip_check_address): Unicast and not net 0 or 127 check - added. - -1999-05-14 Stephen R. van den Berg - - * rip_main.c (signal_init): SIGTERM call sigint. - (sigint): Loggging more better message. - -1999-05-10 Kunihiro Ishiguro - - * ripd.c (rip_add_route): Fix previous route_unlock_node() chenge. - - * rip_main.c (main): Change default zlog output to ZLOG_STDOUT for - debugging. - -1999-05-09 Patrick Koppen - - * rip_interface.c (rip_request): Fix old semantics for fetching - connected address. - - * ripd.c (rip_add_route): Update timer when the route is updated. - -1999-05-09 Carlos Alberto Barcenilla - - * rip_zebra.c (struct zebra): Add ridist_static, ridist_connect, - redist_rip, redist_ripng. - - * rip_zebra.c (zebra_create): Updated for current zebra method. - - * ripd.c (rip_add_route): Add missing route_unlock_node(). - -1999-05-03 Kunihiro Ishiguro - - * ripd.c (rip_add_route): Add metric check. Reported by Carlos - Alberto Barcenilla . - -1999-02-18 Peter Galbavy - - * syslog support added - -1998-12-13 Kunihiro Ishiguro - - * ripd.c (rip_announce_func): Apply new lib functions. - -1998-12-09 Kunihiro Ishiguro - - * ripd.c (config_write_rip): Delete vector v argument. - * rip_zebra.c (config_write_zebra): Likewise. - * rip_interface.c (interface_config_write): Likewise. - -1998-09-07 Kunihiro Ishiguro - - * rip_announce.c (rip_rib_close): When ripd terminates delete all - added route. - -1998-09-01 Kunihiro Ishiguro - - * rip_interface.c: return read packet size. - -1998-05-18 Yamshita TAKAO - - * ripd.h: Modify for compile on Solaris. - -1998-05-07 Kunihiro Ishiguro - - * ripd.c: DEFUN function return CMD_SUCCESS. - change xmalloc to XMALLOC macro. - -1998-05-03 Kunihiro Ishiguro - - * rip_main.c: change CONFDIR to SYSCONFDIR. - -1998-05-01 Kunihiro Ishiguro - - * .cvsignore: added. - -1998-02-04 Kunihiro Ishiguro - - * rip_interface.c (config_write_interface): correct ADVERTISE spell. - - * rip_main.c (main): add usage() and make cleanup. - -1998-01-05 Kunihiro Ishiguro - - * ripd.c (rip_version): add rip version command. - -1998-01-04 Kunihiro Ishiguro - - * rip_interface.c (zebra_get_interface): added to get - interface's information. - - * ChangeLog: create. -- cgit v1.2.1