/* * Zebra configuration command interface routine * Copyright (C) 1997, 98 Kunihiro Ishiguro * * This file is part of GNU Zebra. * * GNU Zebra is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published * by the Free Software Foundation; either version 2, or (at your * option) any later version. * * GNU Zebra is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with GNU Zebra; see the file COPYING. If not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 02111-1307, USA. */ #ifndef _ZEBRA_COMMAND_H #define _ZEBRA_COMMAND_H #include "vector.h" #include "vty.h" /* Host configuration variable */ struct host { /* Host name of this router. */ char *name; /* Password for vty interface. */ char *password; char *password_encrypt; /* Enable password */ char *enable; char *enable_encrypt; /* System wide terminal lines. */ int lines; /* Log filename. */ char *logfile; /* Log stdout. */ u_char log_stdout; /* Log syslog. */ u_char log_syslog; /* config file name of this host */ char *config; /* Flags for services */ int advanced; int encrypt; /* Banner configuration. */ const char *motd; }; /* There are some command levels which called from command node. */ enum node_type { AUTH_NODE, /* Authentication mode of vty interface. */ VIEW_NODE, /* View node. Default mode of vty interface. */ AUTH_ENABLE_NODE, /* Authentication mode for change enable. */ ENABLE_NODE, /* Enable node. */ CONFIG_NODE, /* Config node. Default mode of config file. */ SERVICE_NODE, /* Service node. */ DEBUG_NODE, /* Debug node. */ AAA_NODE, /* AAA node. */ KEYCHAIN_NODE, /* Key-chain node. */ KEYCHAIN_KEY_NODE, /* Key-chain key node. */ INTERFACE_NODE, /* Interface mode node. */ ZEBRA_NODE, /* zebra connection node. */ TABLE_NODE, /* rtm_table selection node. */ RIP_NODE, /* RIP protocol mode node. */ RIPNG_NODE, /* RIPng protocol mode node. */ BGP_NODE, /* BGP protocol mode which includes BGP4+ */ BGP_VPNV4_NODE, /* BGP MPLS-VPN PE exchange. */ BGP_IPV4_NODE, /* BGP IPv4 unicast address family. */ BGP_IPV4M_NODE, /* BGP IPv4 multicast address family. */ BGP_IPV6_NODE, /* BGP IPv6 address family */ OSPF_NODE, /* OSPF protocol mode */ OSPF6_NODE, /* OSPF protocol for IPv6 mode */ ISIS_NODE, /* ISIS protocol mode */ MASC_NODE, /* MASC for multicast. */ IRDP_NODE, /* ICMP Router Discovery Protocol mode. */ IP_NODE, /* Static ip route node. */ ACCESS_NODE, /* Access list node. */ PREFIX_NODE, /* Prefix list node. */ ACCESS_IPV6_NODE, /* Access list node. */ PREFIX_IPV6_NODE, /* Prefix list node. */ AS_LIST_NODE, /* AS list node. */ COMMUNITY_LIST_NODE, /* Community list node. */ RMAP_NODE, /* Route map node. */ SMUX_NODE, /* SNMP configuration node. */ DUMP_NODE, /* Packet dump node. */ FORWARDING_NODE, /* IP forwarding node. */ VTY_NODE /* Vty node. */ }; /* Node which has some commands and prompt string and configuration function pointer . */ struct cmd_node { /* Node index. */ enum node_type node; /* Prompt character at vty interface. */ const char *prompt; /* Is this node's configuration goes to vtysh ? */ int vtysh; /* Node's configuration write function */ int (*func) (struct vty *); /* Vector of this node's command list. */ vector cmd_vector; }; /* Structure of command element. */ struct cmd_element { const char *string; /* Command specification by string. */ int (*func) (struct cmd_element *, struct vty *, int, const char *[]); const char *doc; /* Documentation of this command. */ int daemon; /* Daemon to which this command belong. */ vector strvec; /* Pointing out each description vector. */ unsigned int cmdsize; /* Command index count. */ char *config; /* Configuration string */ vector subconfig; /* Sub configuration string */ }; /* Command description structure. */ struct desc { const char *cmd; /* Command string. */ const char *str; /* Command's description. */ }; /* Return value of the commands. */ #define CMD_SUCCESS 0 #define CMD_WARNING 1 #define CMD_ERR_NO_MATCH 2 #define CMD_ERR_AMBIGUOUS 3 #define CMD_ERR_INCOMPLETE 4 #define CMD_ERR_EXEED_ARGC_MAX 5 #define CMD_ERR_NOTHING_TODO 6 #define CMD_COMPLETE_FULL_MATCH 7 #define CMD_COMPLETE_MATCH 8 #define CMD_COMPLETE_LIST_MATCH 9 #define CMD_SUCCESS_DAEMON 10 /* Argc max counts. */ #define CMD_ARGC_MAX 25 /* Turn off these macros when uisng cpp with extract.pl */ #ifndef VTYSH_EXTRACT_PL /* DEFUN for vty command interafce. Little bit hacky ;-). */ #define DEFUN(funcname, cmdname, cmdstr, helpstr) \ int funcname (struct cmd_element *, struct vty *, int, const char *[]); \ struct cmd_element cmdname = \ { \ .string = cmdstr, \ .func = funcname, \ .doc = helpstr \ }; \ int funcname \ (struct cmd_element *self, struct vty *vty, int argc, const char *argv[]) /* DEFUN_NOSH for commands that vtysh should ignore */ #define DEFUN_NOSH(funcname, cmdname, cmdstr, helpstr) \ DEFUN(funcname, cmdname, cmdstr, helpstr) /* DEFSH for vtysh. */ #define DEFSH(daemon, cmdname, cmdstr, helpstr) \ struct cmd_element cmdname = \ { \ cmdstr, \ NULL, \ helpstr, \ daemon \ }; \ /* DEFUN + DEFSH */ #define DEFUNSH(daemon, funcname, cmdname, cmdstr, helpstr) \ int funcname (struct cmd_element *, struct vty *, int, const char *[]); \ struct cmd_element cmdname = \ { \ cmdstr, \ funcname, \ helpstr, \ daemon \ }; \ int funcname \ (struct cmd_element *self, struct vty *vty, int argc, const char *argv[]) /* ALIAS macro which define existing command's alias. */ #define ALIAS(funcname, cmdname, cmdstr, helpstr) \ struct cmd_element cmdname = \ { \ cmdstr, \ funcname, \ helpstr \ }; #endif /* VTYSH_EXTRACT_PL */ /* Some macroes */ #define CMD_OPTION(S) ((S[0]) == '[') #define CMD_VARIABLE(S) (((S[0]) >= 'A' && (S[0]) <= 'Z') || ((S[0]) == '<')) #define CMD_VARARG(S) ((S[0]) == '.') #define CMD_RANGE(S) ((S[0] == '<')) #define CMD_IPV4(S) ((strcmp ((S), "A.B.C.D") == 0)) #define CMD_IPV4_PREFIX(S) ((strcmp ((S), "A.B.C.D/M") == 0)) #define CMD_IPV6(S) ((strcmp ((S), "X:X::X:X") == 0)) #define CMD_IPV6_PREFIX(S) ((strcmp ((S), "X:X::X:X/M") == 0)) /* Common descriptions. */ #define SHOW_STR "Show running system information\n" #define IP_STR "IP information\n" #define IPV6_STR "IPv6 information\n" #define NO_STR "Negate a command or set its defaults\n" #define CLEAR_STR "Reset functions\n" #define RIP_STR "RIP information\n" #define BGP_STR "BGP information\n" #define OSPF_STR "OSPF information\n" #define NEIGHBOR_STR "Specify neighbor router\n" #define DEBUG_STR "Debugging functions (see also 'undebug')\n" #define UNDEBUG_STR "Disable debugging functions (see also 'debug')\n" #define ROUTER_STR "Enable a routing process\n" #define AS_STR "AS number\n" #define MBGP_STR "MBGP information\n" #define MATCH_STR "Match values from routing table\n" #define SET_STR "Set values in destination routing protocol\n" #define OUT_STR "Filter outgoing routing updates\n" #define IN_STR "Filter incoming routing updates\n" #define V4NOTATION_STR "specify by IPv4 address notation(e.g. 0.0.0.0)\n" #define OSPF6_NUMBER_STR "Specify by number\n" #define INTERFACE_STR "Interface infomation\n" #define IFNAME_STR "Interface name(e.g. ep0)\n" #define IP6_STR "IPv6 Information\n" #define OSPF6_STR "Open Shortest Path First (OSPF) for IPv6\n" #define OSPF6_ROUTER_STR "Enable a routing process\n" #define OSPF6_INSTANCE_STR "<1-65535> Instance ID\n" #define SECONDS_STR "<1-65535> Seconds\n" #define ROUTE_STR "Routing Table\n" #define PREFIX_LIST_STR "Build a prefix list\n" #define OSPF6_DUMP_TYPE_LIST \ "(neighbor|interface|area|lsa|zebra|config|dbex|spf|route|lsdb|redistribute|hook|asbr|prefix|abr)" #define ISIS_STR "IS-IS information\n" #define AREA_TAG_STR "[area tag]\n" #define CONF_BACKUP_EXT ".sav" /* IPv4 only machine should not accept IPv6 address for peer's IP address. So we replace VTY command string like below. */ #ifdef HAVE_IPV6 #define NEIGHBOR_CMD "neighbor (A.B.C.D|X:X::X:X) " #define NO_NEIGHBOR_CMD "no neighbor (A.B.C.D|X:X::X:X) " #define NEIGHBOR_ADDR_STR "Neighbor address\nIPv6 address\n" #define NEIGHBOR_CMD2 "neighbor (A.B.C.D|X:X::X:X|WORD) " #define NO_NEIGHBOR_CMD2 "no neighbor (A.B.C.D|X:X::X:X|WORD) " #define NEIGHBOR_ADDR_STR2 "Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n" #else #define NEIGHBOR_CMD "neighbor A.B.C.D " #define NO_NEIGHBOR_CMD "no neighbor A.B.C.D " #define NEIGHBOR_ADDR_STR "Neighbor address\n" #define NEIGHBOR_CMD2 "neighbor (A.B.C.D|WORD) " #define NO_NEIGHBOR_CMD2 "no neighbor (A.B.C.D|WORD) " #define NEIGHBOR_ADDR_STR2 "Neighbor address\nNeighbor tag\n" #endif /* HAVE_IPV6 */ /* Prototypes. */ void install_node (struct cmd_node *, int (*) (struct vty *)); void install_default (enum node_type); void install_element (enum node_type, struct cmd_element *); void sort_node (); char *argv_concat (const char **, int, int); vector cmd_make_strvec (const char *); void cmd_free_strvec (vector); vector cmd_describe_command (); char **cmd_complete_command (); const char *cmd_prompt (enum node_type); int config_from_file (struct vty *, FILE *); int cmd_execute_command (vector, struct vty *, struct cmd_element **); int cmd_execute_command_strict (vector, struct vty *, struct cmd_element **); void config_replace_string (struct cmd_element *, char *, ...); void cmd_init (int); /* Export typical functions. */ extern struct cmd_element config_end_cmd; extern struct cmd_element config_exit_cmd; extern struct cmd_element config_quit_cmd; extern struct cmd_element config_help_cmd; extern struct cmd_element config_list_cmd; int config_exit (struct cmd_element *, struct vty *, int, const char *[]); int config_help (struct cmd_element *, struct vty *, int, const char *[]); char *host_config_file (); void host_config_set (char *); #endif /* _ZEBRA_COMMAND_H */