2004-09-23 Hasso Tepper <hasso at quagga.net>
* *.[c|h]: list -> struct list *, listnode -> struct listnode *.
2004-09-17 Paul Jakma <paul@dishone.st>
* ripd.c: set receive buffer to a decent size, some systems have low
defaults. Problem noted and fix suggested by Stephan Schweizer
in [zebra 20967].
2004-08-19 Paul Jakma <paul@dishone.st>
* rip_interface.c: (rip_interface_multicast_set) get rid
of extraneous if_pointopoint arg. ifp is accessible via connected.
pass connected->ifp->ifindex to setsockopt_multicast_ipv4.
* ripd.c: (rip_send_packet) update call to
rip_interface_multicast_set
* ripd.h: update rip_interface_multicast_set prototype
2004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com>
* ripd.c: (rip_distribute_update_all) distribute list hook
function pointer prototype requires struct prefix_list * arg.
(rip_distribute_update_all_wrapper) update to pass required arg,
NULL.
2004-06-06 Paul Jakma <paul.jakma@sun.com>
* ripd.h: Add define for the RIPv2 Authentication Data family
Move the auth type defines up to where other defines live.
Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible
md5->auth_len size. Add md5_auth_len field to struct
rip_interface: (rip_interface_new) Init md5_auth_len to compatible
size.
(ip_rip_authentication_mode_cmd) Extended to handle setting
md5 auth-length. Appropriate aliases added.
(no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to
compatible size.
(rip_interface_config_write) Teach it about md5_auth_len.
_always_ write out the auth-length, so that everyone will get
the setting in their config file, and hence allow for a future
change of default for md5_auth_len to be less painful - every md5
user will have this setting in their config file.
ripd.c: (rip_packet_dump) Change nasty hard coded constants to
symbolic defines. Change various tests of 'ntoh.(variable) ==
constant' to test 'variable == ntoh.(constant)'. Clean up
indentation on some long lines.
(rip_auth_simple_password) ditto.
(rip_auth_md5) ditto, also add length argument and sanity check
md5 data offset field. Sanity check md5 auth length, accept RFC
or old-ripd/cisco lengths.
(rip_auth_md5_set) as per (rip_packet_dump), also write out
the configured md5 auth length for the interface (old-ripd or rfc)
(rip_read) as per (rip_packet_dump)
(rip_write_rte) ditto
(rip_response_process) ditto
(rip_write_rte) ditto
2004-06-04 JJ Ludman <jacques.ludman@sun.com>
* ripd.c: Interoperability fix. Correct value for MD5 auth length
is 16. Accept packets with this set to >= 16, and set to 16
ourselves.
2004-05-31 Sowmini Varadhan <sowmini.varadhan@sun.com>
* ripd.c: Fixup compile warnings
* rip_routemap.c: Ditto
2004-05-08 Paul Jakma <paul@dishone.st>
* rip_zebra.c: sync with zclient changes.
* rip_interface.c: ditto.
2004-05-05 Anthony.Golia@morganstanley.com
* ripd.c: (rip_update_jitter) Bound jitter to a more sensible
value, eg 1/4 of update time.
2004-05-03 Paul Jakma <paul@dishone.st>
* ripd.c: (rip_rte_process) fix typo in merge of previous patch
and run function through indent.
2004-03-19 Jean-Yves Simon <lethalwp@tiscali.be>
* ripd.c: (rip_rte_process) make ripd also check on
administrative distance of his own links to update routes.
2004-03-18 sowmini.varadhan@sun.com
* ripd.c: rip_send_packet can get null connected address when
called in response to a unicast rip-request. Handle correctly.
2004-03-03 Krzysztof Oledzki <oleq@ans.pl>
* ripd.c: fix "show ip rip" and per interface rip version selection.
2004-01-23 sowmini.varadhan@sun.com
* rip_interface.c: obsolete unbind code in
rip_interface_multicast_set, and instead do the more portable
(though slower) method of creating a socket for each outgoing packet
and binding the source address on the new socket.
* rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that
source address is determined by the caller of rip_request_send for
ripv1 packets and non-multicast interfaces (rip_request_send loops
over all connected address in all other cases).
* rip_send_packet: don't send packets with source set to
ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;
2003-06-07 Andrew J. Schorr <aschorr@telemetry-investments.com>
* Allow ripd to receive RIPv1
* add default as valid param to passive-interface command
2003-05-25 Vincent Jardin <vjardin@wanadoo.fr>
* 6Wind patch merge.
2003-04-19 Hasso Tepper <hasso@estpak.ee>
* rip_routemap.c: sync daemon's route-map commands to have same
syntax
2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.93 released.
2002-06-30 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ripd.c (rip_output_process): When outgoing interface is same as
next hop interface, announce RIPv2 next hop otherwise set next hop
to 0. Revert previous change then take 6WIND way.
2001-09-14 Akihiro Mizutani <mizutani@dml.com>
* ripd.c: RIP enabled interface's route is advertised by default.
2001-08-28 NOGUCHI Kay <kay@v6.access.co.jp>
* rip_snmp.c (rip_ifaddr_delete): Add route_node_lookup() return
value check.
* rip_interface.c (rip_multicast_leave): Fix bug of multiple IP
address on one interface multicast join/leave bug.
2001-08-26 NOGUCHI Kay <kay@v6.access.co.jp>
* rip_interface.c (no_rip_passive_interface): Add NO_STR.
2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.92a released.
2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.92 released.
2001-06-17 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_routemap.c (route_match_ip_address_prefix_list): Add match
ip next-hop prefix-list WORD.
2001-02-18 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (rip_passive_interface_clean): Call
rip_passive_interface_apply_all.
2001-02-12 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_response_process): Multicast address nexthop check
is moved from rip_nexthop_check.
2001-02-08 Matthew Grant <grantma@anathoth.gen.nz>
* rip_interface.c (ipv4_multicast_join): Use
setsockopt_multicast_ipv4.
(ipv4_multicast_leave): Likewise.
(rip_if_ipv4_address_check): Interface which has IPv4 address can
be enabled.
2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (rip_interface_delete): To support pseudo
interface do not free interface structure.
* ripd.c (rip_output_process): If output interface is in simple
password authentication mode, we need space for authentication
data.
2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_nexthop_check): Fix multicast address nexthop check.
* zebra-0.91 is released.
2001-01-27 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (show_ip_rip): Show metric infinity route's timeout.
(rip_rte_process): If current route is metric infinity, route is
replaced with received rte.
(rip_redistribute_delete): When redistribute route is deleted,
perform poisoned reverse.
(rip_redistribute_withdraw): Likewise.
2001-01-25 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_response_process): RIPv2 routing table entry with
non directly reachable nexthop was dropped. The code is changed
to treat it as 0.0.0.0 nexthop.
(rip_destination_check): Check net 0 address destination.
(rip_nexthop_check): New function for checking nexthop address
validity.
2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_request_process): Triggered update only send changed
route.
* rip_interface.c: Delete RIP_API part until new implementation
comes out.
* rip_snmp.: Likewise.
* rip_zebra.c: Likewise.
* ripd.c: Likewise.
2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (rip_if_init): Remove HAVE_IF_PSEUDO part.
2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* zebra-0.90 is released.
2001-01-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.h (RIP_VTYSH_PATH): Change "/tmp/ripd" to "/tmp/.ripd".
2000-12-25 David Lipovkov <davidl@nbase.co.il>
* ripd.c (rip_rte_process): When a route is in garbage collection
process (invalid with metric 16) and a router receives the same
route with valid metric then route was not installed into zebra
rib, but only into ripd rib. Moreover , it will never get into
zebra rib, because ripd wrongly assumes it's already there.
(rip_redistribute_add): When doing redistribute into rip other
route (e.g. connected) and the same route exists in ripd rib we
changed it in place - bug. Now we don't forget to remove old route
from zebra.
(rip_timeout): When removing routes from zebra I made sure that we
remove route with the metric we have in zebra and not the new
one. It doesn't make a difference now,but could be significant
when multipath support is done.
2000-12-25 David Lipovkov <davidl@nbase.co.il>
* rip_zebra.c (rip_metric_unset): Fix bug of metric value unset.
2000-11-25 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
* ripd.c (rip_request_process): Check passive flag of the
interface.
2000-11-23 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
* rip_interface.c (rip_multicast_join): When IP_ADD_MEMBERSHIP
failed do not set runnning flag to the interface.
2000-11-16 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_output_process): Memory leak related classfull
network generation is fixed.
2000-11-16 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
* rip_interface.c (if_check_address): Obsolete pointopoint address
check is removed.
2000-11-02 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
* rip_interface.c (if_check_address): Add pointopoint address
check.
(rip_interface_up): Add check for passive interface when interface
goes up.
2000-10-23 Jochen Friedrich <jochen@scram.de>
* rip_snmp.c: rip_oid and ripd_oid are used in smux_open after it
is registered. So those variables must be static.
2000-10-19 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c: Change to "no ip rip (send|receive)" command
accept version number argument.
2000-10-17 Akihiro Mizutani <mizutani@dml.com>
* rip_routemap.c (route_set_ip_nexthop_compile): Change "match ip
next-hop" from IP address to access-list name.
2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_peer.c: Change ot use linklist.c instaed of newlist.c.
2000-10-16 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_offset.c: Change to use linklist.c instead of newlist.c.
2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org>
* zebra-0.89 is released.
2000-09-26 Akihiro Mizutani <mizutani@dml.com>
* rip_routemap.c (match_ip_nexthop): Add next-hop format check.
2000-09-18 David Lipovkov <dlipovkov@OpticalAccess.com>
* rip_interface.c (ripd_api_get_if_rx_version): Corrects rip SNMP
and rip API functions dealing with rip version.
* rip_snmp.c (Status_Valid): SNMPv2-TC TEXTUAL-CONVENTION.
2000-09-10 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_snmp.c (rip2IfLookup): Use rip_ifaddr_lookup_next() instead
of rip_if_lookup_next().
* rip_interface.c (rip_enable_network_lookup): Interface enable
check by interface's address with /32 prefix.
* ripd.c (rip_read): When RIP is configured with authentication
and no authentication in incoming packet, drop the packet.
* rip_interface.c (rip_interface_reset): RIP_AUTH_SIMPLE_PASSWORD
is default mode of authentication.
(rip_interface_new): Likewise.
(no_ip_rip_authentication_mode): Likewise.
* ripd.c (rip_read): Likewise.
2000-09-10 David Lipovkov <davidl@nbase.co.il>
* rip_snmp.c: Set ASN_INTEGER v->type where it is needed.
2000-09-08 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_auth_simple_password): Simple password
authentication using key-chain.
(rip_write_rte): Likewise.
* rip_interface.c (ip_rip_authentication_key_chain): Add check for
authentication string configuration.
2000-09-08 Akihiro Mizutani <mizutani@dml.com>
* ripd.c (rip_write_rte): Add check for ri->auth_str.
2000-09-07 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd_api.h: New file is added.
2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_rte_process): rip_route_process() is renamed to
rip_rte_process() to clarify meanings of the function.
rip_route_process() is newly added to process RIP route selection.
2000-08-18 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_incoming_filter): Extract incoming filter code to
function from rip_route_process(). Add check for all interface
filter.
(rip_outgoing_filter): Extract incoming filter code to function
from rip_output_process(). Add check for all interface filter.
* rip_zebra.c (rip_redistribute_clean): Reset redistribute status
when "no router rip" is performed.
* rip_interface.c (rip_interface_clean): Reset interface's RIP
enable status.
2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_route_process): When metric infinity is received the
route is removed from service immediately.
(rip_timeout): Likewise.
(rip_garbage_collect): Do not delete route in garbage collection.
(rip_output_process): Check metric_out exceed metric infinity.
* zebra-0.88 is released.
2000-08-15 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_distance_apply): Unlock node when there is matched
node.
2000-08-13 Akihiro Mizutani <mizutani@dml.com>
* rip_routemap.c (match_ip_nexthop): Add check for IP address
validness.
(no_set_metric): Add new ALIAS.
2000-08-07 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.h (struct rip ): Add distance.
2000-08-05 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_zebra.c (rip_zebra_ipv4_add): Use new Zebra api to register
routes. Pass RIP metric value to zebra.
2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_main.c (main): Make struct thread thread from global
variable to local variable in main.
2000-08-06 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_packet_dump): Add MD5 authentication dump function.
(rip_auth_md5): RIP MD5 authentication packet receive works.
2000-08-02 David Lipovkov <davidl@nbase.co.il>
* rip_interface.c (rip_if_init): Install interface "pseudo"
commands.
(rip_interface_delete): Do not call if_delete() when interface is
pseudo interface.
2000-07-31 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (ip_rip_authentication_mode): "ip rip
authentication mode (md5|text)" is added.
(ip_rip_authentication_key_chain): "ip rip authentication
key-chain KEY-CHAIN" is added.
(rip_interface_clean): Clean all interface configuration.
(rip_interface_reset): Reset all interface configuration.
(rip_clean_network): Clean rip_enable_network.
* ripd.h (struct rip_interface): Add key_chain member.
* ripd.c: Include md5-gnu.h.
2000-07-30 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.h (RIP_NO_AUTH): Change RIP_NO_AUTH value from 1 to 0.
* ripd.c (rip_authentication): Use RIP_AUTH_SIMPLE_PASSWORD
instead of raw value 2.
(rip_write_rte): Likewise.
(rip_write_rte): Check ri->auth_type instead of ri->auth_str.
2000-07-30 David Lipovkov <davidl@nbase.co.il>
* rip_interface.c (rip_if_down): Do not delete ZEBRA_ROUTE_KERNEL
route.
2000-07-27 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_update_process): Add "passive-interface" command.
* ripd.h (struct rip_interface): Add passive member to struct
rip_interface.
2000-07-24 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (rip_if_init): Multiple RIP routes for one
prefix change. The codes are enclosed by #ifdef NEW_RIP_TABLE.
2000-07-24 Akihiro Mizutani <mizutani@dml.com>
* rip_interface.c (rip_if_init): Use install_default() for
INTERFACE_NODE.
2000-07-24 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c: First update timer will be invoked in two seconds.
2000-07-09 Jochen Friedrich <jochen@scram.de>
* rip_snmp.c: Local function definitions to static. Add INTEGER
ASN_INTEGER and TIMETICKS ASN_TIMETICKS definition.
(rip2PeerLookup): Peer with domain lookup implemented.
(rip2PeerTable): Temporary disable RIP2PEERLASTUPDATE value
support due to unknown SNMP agent startup time.
2000-07-05 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.h: Sweep obsolete definitions.
* rip_interface.c (rip_split_horizon): Add "ip split-horizon"
command.
* ripd.c (rip_output_process): Remove split_horizon argument.
(rip_update_process): Likewise.
* ripd.h (struct rip_interface): Add split_horizon flag to struct
rip_interface.
2000-07-04 Akihiro Mizutani <mizutani@dml.com>
* ripd.c (rip_version): Change VERSION to <1-2>.
Add "no version" command.
2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_zebra.c (rip_redistribute_type_metric): "redistribute TYPE
metric <0-16>" command is added.
* rip_routemap.c (route_set_metric): Set metric_set when metric is
modified.
* ripd.h (struct rip_info): To check route-map set metric or not,
new member metric_set is added to struct rip_info.
* ripd.c (rip_route_process): Move metric handling code from
rip_response_process() to rip_route_process().
(rip_output_process): Set output offset-list metric.
2000-07-02 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_offset.c (rip_offset_list): New file for offset-list.
2000-07-02 Akihiro Mizutani <mizutani@dml.com>
* ripd.h (struct rip ): Add default_metric.
* ripd.c (rip_default_metric): "default-metric <1-16>" command is
added.
(config_write_rip): Change configuration order.
* rip_zebra.c: Fix help strings.
2000-07-02 David Lipovkov <davidl@nbase.co.il>
* rip_interface.c (rip_if_init): Add IF_DELETE_HOOK.
2000-07-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_output_process): If specified route-map does not
exist, it treated as deny all.
2000-06-30 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_routemap.c (rip_route_map_init): Call rip_route_map_update
when route-map is deleted.
2000-06-28 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_routemap.c (set_metric): For consistency with bgpd's set
metric, value range is set to <0-4294967295>.
2000-06-28 David Lipovkov <davidl@nbase.co.il>
* rip_routemap.c (rip_route_map_update): Add check for rip is
enabled or not for avoid core dump.
* rip_debug.c (debug_rip_packet_direct): Fix bug of setting
rip_debug_packet flag.
2000-06-13 David Lipovkov <davidl@nbase.co.il>
* rip_interface.c (rip_interface_delete): All work is done in
rip_if_down().
2000-06-06 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_redistribute_delete): Fix bug of missing
route_unlock_node() when redistribute route is not found.
2000-06-05 Akihirof Mizutani <mizutani@dml.com>
* rip_debug.c (rip_debug_init): Disable show debugging in
VIEW_NODE like other protocol daemon.
* rip_routemap.c: Change command argument to more comprehensive.
METRIC -> <0-16>
IFNAME -> WORD
IP_ADDR -> A.B.C.D
ACCSESS_LIST -> WORD
2000-06-05 David Lipovkov <davidl@nbase.co.il>
* rip_interface.c (rip_interface_delete): Delete all routes
include static and kernel through the interface , because even if
the interface is added again there is no guarantee that it will
get the same ifindex as before.
2000-05-31 Akihirof Mizutani <mizutani@dml.com>
* rip_debug.c: Fix rip debug help string.
2000-04-27 Mirko Karanovic <mkaranov@torsel.alcatel.com>
* rip_interface.c (rip_interface_down): Remove interface from
multicast group when interface goes down.
2000-04-03 David Lipovkov <davidl@nbase.co.il>
* rip_interface.c (rip_interface_down): Implemented rip functions
for interface up/down events: rip_interface_up() and
rip_interface_down()
2000-03-16 David Lipovkov <davidl@nbase.co.il>
* rip_zebra.c (rip_zclient_init): Added rip functions for
interface up/down events.
2000-02-15 Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
* ripd.c (rip_write_rte): "set metic" in route-map has no effect
for RIPv1 in ripd. It worked fine for RIPv2.
2000-01-17 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (show_ip_protocols_rip): Fix bug of "show ip protocls"
mis-display RIP version.
* ripd.h (struct rip_peer): Add timeout thread to rip_peer
structure.
2000-01-16 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_peer.c: Add new file for supporting RIP peer.
1999-12-26 David Lipovkov <davidl@nbase.co.il>
* ripd.c (rip_authentication): RIP authantication string is 16
bytes long.
1999-12-10 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_read): Add check for minimum packet length.
Authentication check is moved from rip_process_response() to
rip_read(). Patch from David Lipovkov <davidl@nbase.co.il> is
applied then add rte number check by Kunihiro Ishiguro
<kunihiro@zebra.org>.
1999-12-07 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_response_process): In case of packet is RIPv2 and
network is non zero and netmask is zero, apply netmask rule as
same as RIPv1.
1999-11-06 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_timers): Fix bug of timers basic argument format.
1999-11-03 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_snmp.c (rip2IfConfAddress): Forgot to include
RIP2IFCONFDOMAIN.
1999-10-28 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.h (struct rip_peer): New structure added.
1999-10-26 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_zebra.c (rip_zebra_ipv4_add): Increment
rip_global_route_changes when route change occur.
(rip_zebra_ipv4_delete): Likewise.
* ripd.c (rip_request_process): Increment rip_global_queries when
reply to the query is sent.
1999-10-25 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_debug.c (rip_debug_reset): Reset function added.
* ripd.c (rip_update_process): Logging bug is fixed.
1999-10-10 Marc Boucher <marc@mbsi.ca>
* ripd.c (config_write_rip): Add config_write_distribute() call.
1999-09-29 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_distribute_update): Fix bug of access-list
prefix-list updates.
1999-09-10 VOP <vop@unity.net>
* rip_zebra.c: Add redistribute route-map feature.
1999-09-10 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_response_process): Add check for given prefix is
given mask applied one.
1999-09-03 VOP <vop@unity.net>
* rip_interface.c (rip_interface_multicast_set): Bug fix about
setting multicast interface.
1999-09-02 VOP <vop@unity.net>
* rip_routemap.c: New file added.
1999-09-02 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (show_ip_protocols_rip): Show next update time.
(show_ip_protocols_rip): Show redistribute information.
1999-08-25 Kunihiro Ishiguro <kunihiro@zebra.org>
* RIPv2-MIB.txt: New file added.
* rip_snmp.c: New file added.
1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (ip_rip_authentication_string): RIPv2
authentication command is added.
1999-08-23 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (rip_interface_multicast_set): Process of
setting IP_MULTICAST_IF on specific interface.
* ripd.c (rip_read): Add packet size check.
1999-08-16 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_request_process): Fill in RIP_METRIC_INFINITY with
network byte order using htonl ().
(rip_response_process): Pass host byte order address to IN_CLASSC
and IN_CLASSB macro.
1999-08-08 davidm@nbase.co.il (David Mozes)
* rip_zebra.c (rip_zebra_read_ipv4): Fix split horizon problem.
1999-07-03 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_timer_set): Function added.
1999-07-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_debug.c: New file added.
rip_debug.h: New file added.
1999-07-01 Rick Payne <rickp@rossfell.co.uk>
* rip_zebra.c (zebra_init): Install standard commands to
ZEBRA_NODE.
1999-06-01 David Luyer <luyer@ucs.uwa.edu.au>
* ripd.c (rip_process_route): Add support for RIP version 1.
1999-05-29 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_zebra.c: Change to use lib/zclient.[ch].
1999-05-20 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
* ripd.c (rip_add_route): Change the existance route's metric check
to the condition specified by RFC2453.
1999-05-17 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
* ripd.c (rip_process_route): Add the if metric to the route metric.
* ripd.c (rip_add_route): Deleted add if metric to the route.
1999-05-16 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
* rip_interface.c (if_valid_neighbor): New function.
* ripd.c (rip_process_route): Added check whether the datagram
is from a valid neighbor.
1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_process_route): Set interface pointer to rinfo.
1999-05-15 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
* ripd.c (rip_check_address): Unicast and not net 0 or 127 check
added.
1999-05-14 Stephen R. van den Berg <srb@cuci.nl>
* rip_main.c (signal_init): SIGTERM call sigint.
(sigint): Loggging more better message.
1999-05-10 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_add_route): Fix previous route_unlock_node() chenge.
* rip_main.c (main): Change default zlog output to ZLOG_STDOUT for
debugging.
1999-05-09 Patrick Koppen <koppen@rhrk.uni-kl.de>
* rip_interface.c (rip_request): Fix old semantics for fetching
connected address.
* ripd.c (rip_add_route): Update timer when the route is updated.
1999-05-09 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
* rip_zebra.c (struct zebra): Add ridist_static, ridist_connect,
redist_rip, redist_ripng.
* rip_zebra.c (zebra_create): Updated for current zebra method.
* ripd.c (rip_add_route): Add missing route_unlock_node().
1999-05-03 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_add_route): Add metric check. Reported by Carlos
Alberto Barcenilla <barce@frlp.utn.edu.ar>.
1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com>
* syslog support added
1998-12-13 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_announce_func): Apply new lib functions.
1998-12-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (config_write_rip): Delete vector v argument.
* rip_zebra.c (config_write_zebra): Likewise.
* rip_interface.c (interface_config_write): Likewise.
1998-09-07 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_announce.c (rip_rib_close): When ripd terminates delete all
added route.
1998-09-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c: return read packet size.
1998-05-18 Yamshita TAKAO <jargon@lares.dti.ne.jp>
* ripd.h: Modify for compile on Solaris.
1998-05-07 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c: DEFUN function return CMD_SUCCESS.
change xmalloc to XMALLOC macro.
1998-05-03 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_main.c: change CONFDIR to SYSCONFDIR.
1998-05-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* .cvsignore: added.
1998-02-04 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (config_write_interface): correct ADVERTISE spell.
* rip_main.c (main): add usage() and make cleanup.
1998-01-05 Kunihiro Ishiguro <kunihiro@zebra.org>
* ripd.c (rip_version): add rip version command.
1998-01-04 Kunihiro Ishiguro <kunihiro@zebra.org>
* rip_interface.c (zebra_get_interface): added to get
interface's information.
* ChangeLog: create.