From 0ca62c559670c0d9878b1ede081267d7142506a5 Mon Sep 17 00:00:00 2001 From: Alessandro Ranellucci Date: Tue, 26 Jul 2011 18:45:13 +0200 Subject: New config option HEATER_CURRENT to limit current to the nozzle --- Sprinter/Configuration.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Sprinter/Configuration.h') diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index 3073393..d8bc8ea 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -113,13 +113,15 @@ char uuid[] = "00000000-0000-0000-0000-000000000000"; // Uncomment the following line to enable PID support. This is untested and could be disastrous. Be careful. //#define PIDTEMP 1 #ifdef PIDTEMP -#define PID_MAX 255 // limits current to nozzle #define PID_INTEGRAL_DRIVE_MAX 220 #define PID_PGAIN 180 //100 is 1.0 #define PID_IGAIN 2 //100 is 1.0 #define PID_DGAIN 100 //100 is 1.0 #endif +// Change this value (range 1-255) to limit the current to the nozzle +#define HEATER_CURRENT 255 + // How often should the heater check for new temp readings, in milliseconds #define HEATER_CHECK_INTERVAL 500 #define BED_CHECK_INTERVAL 5000 -- cgit v1.2.1