From 3a29ee97d134d5dbb101f6eac0e26746d0e59de1 Mon Sep 17 00:00:00 2001 From: midopple Date: Sun, 22 Apr 2012 18:33:19 +0200 Subject: Version 1.3.15T - M206 - set additional homeing offset (Thank to se5a for this idea) (First Version is without saving to EEPROM) - Option for minimum FAN start speed --> #define MINIMUM_FAN_START_SPEED 50 (set it to zero to deaktivate) --- Sprinter/Configuration.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'Sprinter/Configuration.h') diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index cc10a09..e403de5 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -240,6 +240,17 @@ const int dropsegments=5; //everything with less than this number of steps will //every Digital output for it, main usage for Sanguinololu #define FAN_SOFT_PWM +//----------------------------------------------------------------------- +//// MINIMUM START SPEED FOR FAN +//----------------------------------------------------------------------- + +//Minimum start speed for FAN when the last speed was zero +//Set to 0 to deaktivate +//If value is set the fan will drive with this minimum speed for MINIMUM_FAN_START_TIME +#define MINIMUM_FAN_START_SPEED 0 + +//This is the time how long the minimum FAN speed is set +#define MINIMUM_FAN_START_TIME 6000 //6sec //----------------------------------------------------------------------- //// HEATERCONTROL AND PID PARAMETERS -- cgit v1.2.1