From e5cb83f4aa28cdfc6ff393463ff445869db3502d Mon Sep 17 00:00:00 2001 From: Ahmet Cem TURAN Date: Wed, 6 Jul 2011 05:59:27 -0700 Subject: Put some notes in for gen6 users.. --- Sprinter/Configuration.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Sprinter/Configuration.h') diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index de2af79..8bccfcc 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -80,7 +80,7 @@ bool axis_relative_modes[] = {false, false, false, false}; //#define STEP_DELAY_MICROS 1 // Step delay over interval ratio. If you are still experiencing missing steps, try to uncomment the following line, but be aware this -// If you enable this, make sure STEP_DELAY_MICROS is disabled. +// If you enable this, make sure STEP_DELAY_MICROS is disabled. (except for Gen6: both need to be enabled.) //#define STEP_DELAY_RATIO 0.25 // Comment this to disable ramp acceleration @@ -121,7 +121,7 @@ long max_travel_acceleration_units_per_sq_second[] = {500,500,50}; // X, Y, Z ma // It also defines the max milliseconds interval after which a travel move is not considered so for the sake of this feature. #define DISABLE_CHECK_DURING_TRAVEL 1000 -//// Temperature smoothing - only uncomment this if your temp readings are noisy +//// Temperature smoothing - only uncomment this if your temp readings are noisy (Gen6 without EvdZ's 5V hack) //#define SMOOTHING 1 //#define SMOOTHFACTOR 16 //best to use a power of two here - determines how many values are averaged together by the smoothing algorithm -- cgit v1.2.1