From e4af5e82f26fab59bb2bda540e1673317f48ce8a Mon Sep 17 00:00:00 2001 From: kliment Date: Mon, 4 Jul 2011 16:17:19 +0200 Subject: Rename to Sprinter --- Sprinter/Sd2Card.cpp | 643 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 643 insertions(+) create mode 100644 Sprinter/Sd2Card.cpp (limited to 'Sprinter/Sd2Card.cpp') diff --git a/Sprinter/Sd2Card.cpp b/Sprinter/Sd2Card.cpp new file mode 100644 index 0000000..8222cfd --- /dev/null +++ b/Sprinter/Sd2Card.cpp @@ -0,0 +1,643 @@ +/* Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino Sd2Card Library. If not, see + * . + */ +#include +#include "Sd2Card.h" +//------------------------------------------------------------------------------ +#ifndef SOFTWARE_SPI +// functions for hardware SPI +/** Send a byte to the card */ +static void spiSend(uint8_t b) { + SPDR = b; + while (!(SPSR & (1 << SPIF))); +} +/** Receive a byte from the card */ +static uint8_t spiRec(void) { + spiSend(0XFF); + return SPDR; +} +#else // SOFTWARE_SPI +//------------------------------------------------------------------------------ +/** nop to tune soft SPI timing */ +#define nop asm volatile ("nop\n\t") +//------------------------------------------------------------------------------ +/** Soft SPI receive */ +uint8_t spiRec(void) { + uint8_t data = 0; + // no interrupts during byte receive - about 8 us + cli(); + // output pin high - like sending 0XFF + fastDigitalWrite(SPI_MOSI_PIN, HIGH); + + for (uint8_t i = 0; i < 8; i++) { + fastDigitalWrite(SPI_SCK_PIN, HIGH); + + // adjust so SCK is nice + nop; + nop; + + data <<= 1; + + if (fastDigitalRead(SPI_MISO_PIN)) data |= 1; + + fastDigitalWrite(SPI_SCK_PIN, LOW); + } + // enable interrupts + sei(); + return data; +} +//------------------------------------------------------------------------------ +/** Soft SPI send */ +void spiSend(uint8_t data) { + // no interrupts during byte send - about 8 us + cli(); + for (uint8_t i = 0; i < 8; i++) { + fastDigitalWrite(SPI_SCK_PIN, LOW); + + fastDigitalWrite(SPI_MOSI_PIN, data & 0X80); + + data <<= 1; + + fastDigitalWrite(SPI_SCK_PIN, HIGH); + } + // hold SCK high for a few ns + nop; + nop; + nop; + nop; + + fastDigitalWrite(SPI_SCK_PIN, LOW); + // enable interrupts + sei(); +} +#endif // SOFTWARE_SPI +//------------------------------------------------------------------------------ +// send command and return error code. Return zero for OK +uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) { + // end read if in partialBlockRead mode + readEnd(); + + // select card + chipSelectLow(); + + // wait up to 300 ms if busy + waitNotBusy(300); + + // send command + spiSend(cmd | 0x40); + + // send argument + for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s); + + // send CRC + uint8_t crc = 0XFF; + if (cmd == CMD0) crc = 0X95; // correct crc for CMD0 with arg 0 + if (cmd == CMD8) crc = 0X87; // correct crc for CMD8 with arg 0X1AA + spiSend(crc); + + // wait for response + for (uint8_t i = 0; ((status_ = spiRec()) & 0X80) && i != 0XFF; i++); + return status_; +} +//------------------------------------------------------------------------------ +/** + * Determine the size of an SD flash memory card. + * + * \return The number of 512 byte data blocks in the card + * or zero if an error occurs. + */ +uint32_t Sd2Card::cardSize(void) { + csd_t csd; + if (!readCSD(&csd)) return 0; + if (csd.v1.csd_ver == 0) { + uint8_t read_bl_len = csd.v1.read_bl_len; + uint16_t c_size = (csd.v1.c_size_high << 10) + | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low; + uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1) + | csd.v1.c_size_mult_low; + return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7); + } else if (csd.v2.csd_ver == 1) { + uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16) + | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low; + return (c_size + 1) << 10; + } else { + error(SD_CARD_ERROR_BAD_CSD); + return 0; + } +} +//------------------------------------------------------------------------------ +void Sd2Card::chipSelectHigh(void) { + digitalWrite(chipSelectPin_, HIGH); +} +//------------------------------------------------------------------------------ +void Sd2Card::chipSelectLow(void) { + digitalWrite(chipSelectPin_, LOW); +} +//------------------------------------------------------------------------------ +/** Erase a range of blocks. + * + * \param[in] firstBlock The address of the first block in the range. + * \param[in] lastBlock The address of the last block in the range. + * + * \note This function requests the SD card to do a flash erase for a + * range of blocks. The data on the card after an erase operation is + * either 0 or 1, depends on the card vendor. The card must support + * single block erase. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +uint8_t Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { + if (!eraseSingleBlockEnable()) { + error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK); + goto fail; + } + if (type_ != SD_CARD_TYPE_SDHC) { + firstBlock <<= 9; + lastBlock <<= 9; + } + if (cardCommand(CMD32, firstBlock) + || cardCommand(CMD33, lastBlock) + || cardCommand(CMD38, 0)) { + error(SD_CARD_ERROR_ERASE); + goto fail; + } + if (!waitNotBusy(SD_ERASE_TIMEOUT)) { + error(SD_CARD_ERROR_ERASE_TIMEOUT); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Determine if card supports single block erase. + * + * \return The value one, true, is returned if single block erase is supported. + * The value zero, false, is returned if single block erase is not supported. + */ +uint8_t Sd2Card::eraseSingleBlockEnable(void) { + csd_t csd; + return readCSD(&csd) ? csd.v1.erase_blk_en : 0; +} +//------------------------------------------------------------------------------ +/** + * Initialize an SD flash memory card. + * + * \param[in] sckRateID SPI clock rate selector. See setSckRate(). + * \param[in] chipSelectPin SD chip select pin number. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. The reason for failure + * can be determined by calling errorCode() and errorData(). + */ +uint8_t Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) { + errorCode_ = inBlock_ = partialBlockRead_ = type_ = 0; + chipSelectPin_ = chipSelectPin; + // 16-bit init start time allows over a minute + uint16_t t0 = (uint16_t)millis(); + uint32_t arg; + + // set pin modes + pinMode(chipSelectPin_, OUTPUT); + chipSelectHigh(); + pinMode(SPI_MISO_PIN, INPUT); + pinMode(SPI_MOSI_PIN, OUTPUT); + pinMode(SPI_SCK_PIN, OUTPUT); + +#ifndef SOFTWARE_SPI + // SS must be in output mode even it is not chip select + pinMode(SS_PIN, OUTPUT); + // Enable SPI, Master, clock rate f_osc/128 + SPCR = (1 << SPE) | (1 << MSTR) | (1 << SPR1) | (1 << SPR0); + // clear double speed + SPSR &= ~(1 << SPI2X); +#endif // SOFTWARE_SPI + + // must supply min of 74 clock cycles with CS high. + for (uint8_t i = 0; i < 10; i++) spiSend(0XFF); + + chipSelectLow(); + + // command to go idle in SPI mode + while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) { + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_CMD0); + goto fail; + } + } + // check SD version + if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) { + type(SD_CARD_TYPE_SD1); + } else { + // only need last byte of r7 response + for (uint8_t i = 0; i < 4; i++) status_ = spiRec(); + if (status_ != 0XAA) { + error(SD_CARD_ERROR_CMD8); + goto fail; + } + type(SD_CARD_TYPE_SD2); + } + // initialize card and send host supports SDHC if SD2 + arg = type() == SD_CARD_TYPE_SD2 ? 0X40000000 : 0; + + while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) { + // check for timeout + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_ACMD41); + goto fail; + } + } + // if SD2 read OCR register to check for SDHC card + if (type() == SD_CARD_TYPE_SD2) { + if (cardCommand(CMD58, 0)) { + error(SD_CARD_ERROR_CMD58); + goto fail; + } + if ((spiRec() & 0XC0) == 0XC0) type(SD_CARD_TYPE_SDHC); + // discard rest of ocr - contains allowed voltage range + for (uint8_t i = 0; i < 3; i++) spiRec(); + } + chipSelectHigh(); + +#ifndef SOFTWARE_SPI + return setSckRate(sckRateID); +#else // SOFTWARE_SPI + return true; +#endif // SOFTWARE_SPI + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Enable or disable partial block reads. + * + * Enabling partial block reads improves performance by allowing a block + * to be read over the SPI bus as several sub-blocks. Errors may occur + * if the time between reads is too long since the SD card may timeout. + * The SPI SS line will be held low until the entire block is read or + * readEnd() is called. + * + * Use this for applications like the Adafruit Wave Shield. + * + * \param[in] value The value TRUE (non-zero) or FALSE (zero).) + */ +void Sd2Card::partialBlockRead(uint8_t value) { + readEnd(); + partialBlockRead_ = value; +} +//------------------------------------------------------------------------------ +/** + * Read a 512 byte block from an SD card device. + * + * \param[in] block Logical block to be read. + * \param[out] dst Pointer to the location that will receive the data. + + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +uint8_t Sd2Card::readBlock(uint32_t block, uint8_t* dst) { + return readData(block, 0, 512, dst); +} +//------------------------------------------------------------------------------ +/** + * Read part of a 512 byte block from an SD card. + * + * \param[in] block Logical block to be read. + * \param[in] offset Number of bytes to skip at start of block + * \param[out] dst Pointer to the location that will receive the data. + * \param[in] count Number of bytes to read + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +uint8_t Sd2Card::readData(uint32_t block, + uint16_t offset, uint16_t count, uint8_t* dst) { + uint16_t n; + if (count == 0) return true; + if ((count + offset) > 512) { + goto fail; + } + if (!inBlock_ || block != block_ || offset < offset_) { + block_ = block; + // use address if not SDHC card + if (type()!= SD_CARD_TYPE_SDHC) block <<= 9; + if (cardCommand(CMD17, block)) { + error(SD_CARD_ERROR_CMD17); + goto fail; + } + if (!waitStartBlock()) { + goto fail; + } + offset_ = 0; + inBlock_ = 1; + } + +#ifdef OPTIMIZE_HARDWARE_SPI + // start first spi transfer + SPDR = 0XFF; + + // skip data before offset + for (;offset_ < offset; offset_++) { + while (!(SPSR & (1 << SPIF))); + SPDR = 0XFF; + } + // transfer data + n = count - 1; + for (uint16_t i = 0; i < n; i++) { + while (!(SPSR & (1 << SPIF))); + dst[i] = SPDR; + SPDR = 0XFF; + } + // wait for last byte + while (!(SPSR & (1 << SPIF))); + dst[n] = SPDR; + +#else // OPTIMIZE_HARDWARE_SPI + + // skip data before offset + for (;offset_ < offset; offset_++) { + spiRec(); + } + // transfer data + for (uint16_t i = 0; i < count; i++) { + dst[i] = spiRec(); + } +#endif // OPTIMIZE_HARDWARE_SPI + + offset_ += count; + if (!partialBlockRead_ || offset_ >= 512) { + // read rest of data, checksum and set chip select high + readEnd(); + } + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Skip remaining data in a block when in partial block read mode. */ +void Sd2Card::readEnd(void) { + if (inBlock_) { + // skip data and crc +#ifdef OPTIMIZE_HARDWARE_SPI + // optimize skip for hardware + SPDR = 0XFF; + while (offset_++ < 513) { + while (!(SPSR & (1 << SPIF))); + SPDR = 0XFF; + } + // wait for last crc byte + while (!(SPSR & (1 << SPIF))); +#else // OPTIMIZE_HARDWARE_SPI + while (offset_++ < 514) spiRec(); +#endif // OPTIMIZE_HARDWARE_SPI + chipSelectHigh(); + inBlock_ = 0; + } +} +//------------------------------------------------------------------------------ +/** read CID or CSR register */ +uint8_t Sd2Card::readRegister(uint8_t cmd, void* buf) { + uint8_t* dst = reinterpret_cast(buf); + if (cardCommand(cmd, 0)) { + error(SD_CARD_ERROR_READ_REG); + goto fail; + } + if (!waitStartBlock()) goto fail; + // transfer data + for (uint16_t i = 0; i < 16; i++) dst[i] = spiRec(); + spiRec(); // get first crc byte + spiRec(); // get second crc byte + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Set the SPI clock rate. + * + * \param[in] sckRateID A value in the range [0, 6]. + * + * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum + * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128 + * for \a scsRateID = 6. + * + * \return The value one, true, is returned for success and the value zero, + * false, is returned for an invalid value of \a sckRateID. + */ +uint8_t Sd2Card::setSckRate(uint8_t sckRateID) { + if (sckRateID > 6) { + error(SD_CARD_ERROR_SCK_RATE); + return false; + } + // see avr processor datasheet for SPI register bit definitions + if ((sckRateID & 1) || sckRateID == 6) { + SPSR &= ~(1 << SPI2X); + } else { + SPSR |= (1 << SPI2X); + } + SPCR &= ~((1 < SD_READ_TIMEOUT) { + error(SD_CARD_ERROR_READ_TIMEOUT); + goto fail; + } + } + if (status_ != DATA_START_BLOCK) { + error(SD_CARD_ERROR_READ); + goto fail; + } + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Writes a 512 byte block to an SD card. + * + * \param[in] blockNumber Logical block to be written. + * \param[in] src Pointer to the location of the data to be written. + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +uint8_t Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { +#if SD_PROTECT_BLOCK_ZERO + // don't allow write to first block + if (blockNumber == 0) { + error(SD_CARD_ERROR_WRITE_BLOCK_ZERO); + goto fail; + } +#endif // SD_PROTECT_BLOCK_ZERO + + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD24, blockNumber)) { + error(SD_CARD_ERROR_CMD24); + goto fail; + } + if (!writeData(DATA_START_BLOCK, src)) goto fail; + + // wait for flash programming to complete + if (!waitNotBusy(SD_WRITE_TIMEOUT)) { + error(SD_CARD_ERROR_WRITE_TIMEOUT); + goto fail; + } + // response is r2 so get and check two bytes for nonzero + if (cardCommand(CMD13, 0) || spiRec()) { + error(SD_CARD_ERROR_WRITE_PROGRAMMING); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Write one data block in a multiple block write sequence */ +uint8_t Sd2Card::writeData(const uint8_t* src) { + // wait for previous write to finish + if (!waitNotBusy(SD_WRITE_TIMEOUT)) { + error(SD_CARD_ERROR_WRITE_MULTIPLE); + chipSelectHigh(); + return false; + } + return writeData(WRITE_MULTIPLE_TOKEN, src); +} +//------------------------------------------------------------------------------ +// send one block of data for write block or write multiple blocks +uint8_t Sd2Card::writeData(uint8_t token, const uint8_t* src) { +#ifdef OPTIMIZE_HARDWARE_SPI + + // send data - optimized loop + SPDR = token; + + // send two byte per iteration + for (uint16_t i = 0; i < 512; i += 2) { + while (!(SPSR & (1 << SPIF))); + SPDR = src[i]; + while (!(SPSR & (1 << SPIF))); + SPDR = src[i+1]; + } + + // wait for last data byte + while (!(SPSR & (1 << SPIF))); + +#else // OPTIMIZE_HARDWARE_SPI + spiSend(token); + for (uint16_t i = 0; i < 512; i++) { + spiSend(src[i]); + } +#endif // OPTIMIZE_HARDWARE_SPI + spiSend(0xff); // dummy crc + spiSend(0xff); // dummy crc + + status_ = spiRec(); + if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) { + error(SD_CARD_ERROR_WRITE); + chipSelectHigh(); + return false; + } + return true; +} +//------------------------------------------------------------------------------ +/** Start a write multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * \param[in] eraseCount The number of blocks to be pre-erased. + * + * \note This function is used with writeData() and writeStop() + * for optimized multiple block writes. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +uint8_t Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) { +#if SD_PROTECT_BLOCK_ZERO + // don't allow write to first block + if (blockNumber == 0) { + error(SD_CARD_ERROR_WRITE_BLOCK_ZERO); + goto fail; + } +#endif // SD_PROTECT_BLOCK_ZERO + // send pre-erase count + if (cardAcmd(ACMD23, eraseCount)) { + error(SD_CARD_ERROR_ACMD23); + goto fail; + } + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD25, blockNumber)) { + error(SD_CARD_ERROR_CMD25); + goto fail; + } + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** End a write multiple blocks sequence. + * +* \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +uint8_t Sd2Card::writeStop(void) { + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + spiSend(STOP_TRAN_TOKEN); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + chipSelectHigh(); + return true; + + fail: + error(SD_CARD_ERROR_STOP_TRAN); + chipSelectHigh(); + return false; +} -- cgit v1.2.1