From e4af5e82f26fab59bb2bda540e1673317f48ce8a Mon Sep 17 00:00:00 2001 From: kliment Date: Mon, 4 Jul 2011 16:17:19 +0200 Subject: Rename to Sprinter --- Sprinter/Sd2Card.h | 233 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 Sprinter/Sd2Card.h (limited to 'Sprinter/Sd2Card.h') diff --git a/Sprinter/Sd2Card.h b/Sprinter/Sd2Card.h new file mode 100644 index 0000000..73b46fb --- /dev/null +++ b/Sprinter/Sd2Card.h @@ -0,0 +1,233 @@ +/* Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino Sd2Card Library. If not, see + * . + */ +#ifndef Sd2Card_h +#define Sd2Card_h +/** + * \file + * Sd2Card class + */ +#include "Sd2PinMap.h" +#include "SdInfo.h" +/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */ +uint8_t const SPI_FULL_SPEED = 0; +/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */ +uint8_t const SPI_HALF_SPEED = 1; +/** Set SCK rate to F_CPU/8. Sd2Card::setSckRate(). */ +uint8_t const SPI_QUARTER_SPEED = 2; +/** + * Define MEGA_SOFT_SPI non-zero to use software SPI on Mega Arduinos. + * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13. + * + * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used + * on Mega Arduinos. Software SPI works well with GPS Shield V1.1 + * but many SD cards will fail with GPS Shield V1.0. + */ +#define MEGA_SOFT_SPI 0 +//------------------------------------------------------------------------------ +#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__)) +#define SOFTWARE_SPI +#endif // MEGA_SOFT_SPI +//------------------------------------------------------------------------------ +// SPI pin definitions +// +#ifndef SOFTWARE_SPI +// hardware pin defs +/** + * SD Chip Select pin + * + * Warning if this pin is redefined the hardware SS will pin will be enabled + * as an output by init(). An avr processor will not function as an SPI + * master unless SS is set to output mode. + */ +/** The default chip select pin for the SD card is SS. */ +uint8_t const SD_CHIP_SELECT_PIN = SS_PIN; +// The following three pins must not be redefined for hardware SPI. +/** SPI Master Out Slave In pin */ +uint8_t const SPI_MOSI_PIN = MOSI_PIN; +/** SPI Master In Slave Out pin */ +uint8_t const SPI_MISO_PIN = MISO_PIN; +/** SPI Clock pin */ +uint8_t const SPI_SCK_PIN = SCK_PIN; +/** optimize loops for hardware SPI */ +#define OPTIMIZE_HARDWARE_SPI + +#else // SOFTWARE_SPI +// define software SPI pins so Mega can use unmodified GPS Shield +/** SPI chip select pin */ +uint8_t const SD_CHIP_SELECT_PIN = 10; +/** SPI Master Out Slave In pin */ +uint8_t const SPI_MOSI_PIN = 11; +/** SPI Master In Slave Out pin */ +uint8_t const SPI_MISO_PIN = 12; +/** SPI Clock pin */ +uint8_t const SPI_SCK_PIN = 13; +#endif // SOFTWARE_SPI +//------------------------------------------------------------------------------ +/** Protect block zero from write if nonzero */ +#define SD_PROTECT_BLOCK_ZERO 1 +/** init timeout ms */ +uint16_t const SD_INIT_TIMEOUT = 2000; +/** erase timeout ms */ +uint16_t const SD_ERASE_TIMEOUT = 10000; +/** read timeout ms */ +uint16_t const SD_READ_TIMEOUT = 300; +/** write time out ms */ +uint16_t const SD_WRITE_TIMEOUT = 600; +//------------------------------------------------------------------------------ +// SD card errors +/** timeout error for command CMD0 */ +uint8_t const SD_CARD_ERROR_CMD0 = 0X1; +/** CMD8 was not accepted - not a valid SD card*/ +uint8_t const SD_CARD_ERROR_CMD8 = 0X2; +/** card returned an error response for CMD17 (read block) */ +uint8_t const SD_CARD_ERROR_CMD17 = 0X3; +/** card returned an error response for CMD24 (write block) */ +uint8_t const SD_CARD_ERROR_CMD24 = 0X4; +/** WRITE_MULTIPLE_BLOCKS command failed */ +uint8_t const SD_CARD_ERROR_CMD25 = 0X05; +/** card returned an error response for CMD58 (read OCR) */ +uint8_t const SD_CARD_ERROR_CMD58 = 0X06; +/** SET_WR_BLK_ERASE_COUNT failed */ +uint8_t const SD_CARD_ERROR_ACMD23 = 0X07; +/** card's ACMD41 initialization process timeout */ +uint8_t const SD_CARD_ERROR_ACMD41 = 0X08; +/** card returned a bad CSR version field */ +uint8_t const SD_CARD_ERROR_BAD_CSD = 0X09; +/** erase block group command failed */ +uint8_t const SD_CARD_ERROR_ERASE = 0X0A; +/** card not capable of single block erase */ +uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0X0B; +/** Erase sequence timed out */ +uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0X0C; +/** card returned an error token instead of read data */ +uint8_t const SD_CARD_ERROR_READ = 0X0D; +/** read CID or CSD failed */ +uint8_t const SD_CARD_ERROR_READ_REG = 0X0E; +/** timeout while waiting for start of read data */ +uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X0F; +/** card did not accept STOP_TRAN_TOKEN */ +uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X10; +/** card returned an error token as a response to a write operation */ +uint8_t const SD_CARD_ERROR_WRITE = 0X11; +/** attempt to write protected block zero */ +uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X12; +/** card did not go ready for a multiple block write */ +uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X13; +/** card returned an error to a CMD13 status check after a write */ +uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X14; +/** timeout occurred during write programming */ +uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X15; +/** incorrect rate selected */ +uint8_t const SD_CARD_ERROR_SCK_RATE = 0X16; +//------------------------------------------------------------------------------ +// card types +/** Standard capacity V1 SD card */ +uint8_t const SD_CARD_TYPE_SD1 = 1; +/** Standard capacity V2 SD card */ +uint8_t const SD_CARD_TYPE_SD2 = 2; +/** High Capacity SD card */ +uint8_t const SD_CARD_TYPE_SDHC = 3; +//------------------------------------------------------------------------------ +/** + * \class Sd2Card + * \brief Raw access to SD and SDHC flash memory cards. + */ +class Sd2Card { + public: + /** Construct an instance of Sd2Card. */ + Sd2Card(void) : errorCode_(0), inBlock_(0), partialBlockRead_(0), type_(0) {} + uint32_t cardSize(void); + uint8_t erase(uint32_t firstBlock, uint32_t lastBlock); + uint8_t eraseSingleBlockEnable(void); + /** + * \return error code for last error. See Sd2Card.h for a list of error codes. + */ + uint8_t errorCode(void) const {return errorCode_;} + /** \return error data for last error. */ + uint8_t errorData(void) const {return status_;} + /** + * Initialize an SD flash memory card with default clock rate and chip + * select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin). + */ + uint8_t init(void) { + return init(SPI_FULL_SPEED, SD_CHIP_SELECT_PIN); + } + /** + * Initialize an SD flash memory card with the selected SPI clock rate + * and the default SD chip select pin. + * See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin). + */ + uint8_t init(uint8_t sckRateID) { + return init(sckRateID, SD_CHIP_SELECT_PIN); + } + uint8_t init(uint8_t sckRateID, uint8_t chipSelectPin); + void partialBlockRead(uint8_t value); + /** Returns the current value, true or false, for partial block read. */ + uint8_t partialBlockRead(void) const {return partialBlockRead_;} + uint8_t readBlock(uint32_t block, uint8_t* dst); + uint8_t readData(uint32_t block, + uint16_t offset, uint16_t count, uint8_t* dst); + /** + * Read a cards CID register. The CID contains card identification + * information such as Manufacturer ID, Product name, Product serial + * number and Manufacturing date. */ + uint8_t readCID(cid_t* cid) { + return readRegister(CMD10, cid); + } + /** + * Read a cards CSD register. The CSD contains Card-Specific Data that + * provides information regarding access to the card's contents. */ + uint8_t readCSD(csd_t* csd) { + return readRegister(CMD9, csd); + } + void readEnd(void); + uint8_t setSckRate(uint8_t sckRateID); + /** Return the card type: SD V1, SD V2 or SDHC */ + uint8_t type(void) const {return type_;} + uint8_t writeBlock(uint32_t blockNumber, const uint8_t* src); + uint8_t writeData(const uint8_t* src); + uint8_t writeStart(uint32_t blockNumber, uint32_t eraseCount); + uint8_t writeStop(void); + private: + uint32_t block_; + uint8_t chipSelectPin_; + uint8_t errorCode_; + uint8_t inBlock_; + uint16_t offset_; + uint8_t partialBlockRead_; + uint8_t status_; + uint8_t type_; + // private functions + uint8_t cardAcmd(uint8_t cmd, uint32_t arg) { + cardCommand(CMD55, 0); + return cardCommand(cmd, arg); + } + uint8_t cardCommand(uint8_t cmd, uint32_t arg); + void error(uint8_t code) {errorCode_ = code;} + uint8_t readRegister(uint8_t cmd, void* buf); + uint8_t sendWriteCommand(uint32_t blockNumber, uint32_t eraseCount); + void chipSelectHigh(void); + void chipSelectLow(void); + void type(uint8_t value) {type_ = value;} + uint8_t waitNotBusy(uint16_t timeoutMillis); + uint8_t writeData(uint8_t token, const uint8_t* src); + uint8_t waitStartBlock(void); +}; +#endif // Sd2Card_h -- cgit v1.2.1