From 7eef2733856dac97dd46f19160cf6fb2eedd198b Mon Sep 17 00:00:00 2001
From: blddk <michael.andresen@gmail.com>
Date: Sun, 16 Oct 2011 15:55:42 +0300
Subject: Added function for controlling controller cooling fan

---
 Sprinter/Sprinter.pde | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

(limited to 'Sprinter/Sprinter.pde')

diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde
index 52910ec..8124f00 100644
--- a/Sprinter/Sprinter.pde
+++ b/Sprinter/Sprinter.pde
@@ -245,6 +245,10 @@ void setup()
   if(!E_ENABLE_ON) WRITE(E_ENABLE_PIN,HIGH);
   #endif
   
+  #ifdef CONTROLLERFAN_PIN
+    SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
+  #endif
+  
   //endstops and pullups
   #ifdef ENDSTOPPULLUPS
   #if X_MIN_PIN > -1
@@ -1441,6 +1445,32 @@ int read_max6675()
 }
 #endif
 
+#ifdef CONTROLLERFAN_PIN
+unsigned long lastMotor = 0; //Save the time for when a motor was turned on last
+unsigned long lastMotorCheck = 0;
+
+void controllerFan()
+{  
+  if ((millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms
+  {
+    lastMotorCheck = millis();
+    
+    if(!digitalRead(X_ENABLE_PIN) || !digitalRead(Y_ENABLE_PIN) || !digitalRead(Z_ENABLE_PIN) || !digitalRead(E_ENABLE_PIN)) //If any of the drivers are enabled...
+    {
+      lastMotor = millis(); //... set time to NOW so the fan will turn on
+    }
+    
+    if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
+    {
+      digitalWrite(CONTROLLERFAN_PIN, LOW); //... turn the fan off
+    }
+    else
+    {
+      digitalWrite(CONTROLLERFAN_PIN, HIGH); //... turn the fan on
+    }
+  }
+}
+#endif
 
 void manage_heater()
 {
@@ -1579,6 +1609,10 @@ void manage_heater()
       WRITE(HEATER_1_PIN,HIGH);
     }
     #endif
+    
+#ifdef CONTROLLERFAN_PIN
+  controllerFan(); //Check if fan should be turned on to cool stepper drivers down
+#endif
 }
 
 #if defined (HEATER_USES_THERMISTOR) || defined (BED_USES_THERMISTOR)
-- 
cgit v1.2.1


From cc1bb0fc0825ca7997b3c21ae744972a1b22a6f9 Mon Sep 17 00:00:00 2001
From: blddk <michael.andresen@gmail.com>
Date: Sun, 16 Oct 2011 16:26:08 +0300
Subject: Update Sprinter/Sprinter.pde

---
 Sprinter/Sprinter.pde | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'Sprinter/Sprinter.pde')

diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde
index 8124f00..9b694fd 100644
--- a/Sprinter/Sprinter.pde
+++ b/Sprinter/Sprinter.pde
@@ -1455,18 +1455,18 @@ void controllerFan()
   {
     lastMotorCheck = millis();
     
-    if(!digitalRead(X_ENABLE_PIN) || !digitalRead(Y_ENABLE_PIN) || !digitalRead(Z_ENABLE_PIN) || !digitalRead(E_ENABLE_PIN)) //If any of the drivers are enabled...
+    if(!READ(X_ENABLE_PIN) || !READ(Y_ENABLE_PIN) || !READ(Z_ENABLE_PIN) || !READ(E_ENABLE_PIN)) //If any of the drivers are enabled...
     {
       lastMotor = millis(); //... set time to NOW so the fan will turn on
     }
     
     if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
     {
-      digitalWrite(CONTROLLERFAN_PIN, LOW); //... turn the fan off
+      WRITE(CONTROLLERFAN_PIN, LOW); //... turn the fan off
     }
     else
     {
-      digitalWrite(CONTROLLERFAN_PIN, HIGH); //... turn the fan on
+      WRITE(CONTROLLERFAN_PIN, HIGH); //... turn the fan on
     }
   }
 }
-- 
cgit v1.2.1


From 588109f0984eeeb1f97dee956f26c9cecea1c806 Mon Sep 17 00:00:00 2001
From: blddk <michael.andresen@gmail.com>
Date: Sun, 16 Oct 2011 16:29:59 +0300
Subject: Update Sprinter/Sprinter.pde

---
 Sprinter/Sprinter.pde | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'Sprinter/Sprinter.pde')

diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde
index 9b694fd..ca3e0e9 100644
--- a/Sprinter/Sprinter.pde
+++ b/Sprinter/Sprinter.pde
@@ -1460,7 +1460,7 @@ void controllerFan()
       lastMotor = millis(); //... set time to NOW so the fan will turn on
     }
     
-    if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
+    if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000L) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
     {
       WRITE(CONTROLLERFAN_PIN, LOW); //... turn the fan off
     }
-- 
cgit v1.2.1


From f63468b74788d6c9efd7d7a2bf9174c99d0044ca Mon Sep 17 00:00:00 2001
From: blddk <michael.andresen@gmail.com>
Date: Sun, 16 Oct 2011 16:31:56 +0300
Subject: Update Sprinter/Sprinter.pde

---
 Sprinter/Sprinter.pde | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'Sprinter/Sprinter.pde')

diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde
index ca3e0e9..7a6bf5e 100644
--- a/Sprinter/Sprinter.pde
+++ b/Sprinter/Sprinter.pde
@@ -1460,7 +1460,7 @@ void controllerFan()
       lastMotor = millis(); //... set time to NOW so the fan will turn on
     }
     
-    if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000L) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
+    if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000UL) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
     {
       WRITE(CONTROLLERFAN_PIN, LOW); //... turn the fan off
     }
-- 
cgit v1.2.1