From 57847ba2ebb15e28e6913068c13da474d87c6a8d Mon Sep 17 00:00:00 2001
From: Joe Kerman <jkerman@gmail.com>
Date: Tue, 4 Oct 2011 18:42:29 -0500
Subject: (correct) pin defs for a190usb1286/teensylu

---
 Sprinter/pins.h | 54 +++++++++++++++++++++++++++++-------------------------
 1 file changed, 29 insertions(+), 25 deletions(-)

(limited to 'Sprinter/pins.h')

diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index 6df5288..d9111ce 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -624,51 +624,55 @@
 /****************************************************************************************
 * Teensylu 0.7 pin assingments (ATMEGA90USB)
 * Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE!
-* SDSUPPORT must be disabled
 ****************************************************************************************/
 #if MOTHERBOARD == 8
 #define MOTHERBOARD 8
 #define KNOWN_BOARD 1
 
 
-#define X_STEP_PIN         28 
-#define X_DIR_PIN          29 
-#define X_ENABLE_PIN       19
-#define X_MIN_PIN          25
+#define X_STEP_PIN          0  
+#define X_DIR_PIN           1  
+#define X_ENABLE_PIN       39 
+#define X_MIN_PIN          13 
 #define X_MAX_PIN          -1    
 
-#define Y_STEP_PIN         30 
-#define Y_DIR_PIN          31
-#define Y_ENABLE_PIN       18
-#define Y_MIN_PIN          26
+#define Y_STEP_PIN          2  
+#define Y_DIR_PIN           3 
+#define Y_ENABLE_PIN       38 
+#define Y_MIN_PIN          14 
 #define Y_MAX_PIN          -1    
 
-#define Z_STEP_PIN         32 
-#define Z_DIR_PIN          33
-#define Z_ENABLE_PIN       17
-#define Z_MIN_PIN          27
+#define Z_STEP_PIN          4
+#define Z_DIR_PIN           5 
+#define Z_ENABLE_PIN       23 
+#define Z_MIN_PIN          15 
 #define Z_MAX_PIN          -1    
 
-#define E_STEP_PIN         34 
-#define E_DIR_PIN          35
-#define E_ENABLE_PIN       13
+#define E_STEP_PIN          6  
+#define E_DIR_PIN           7 
+#define E_ENABLE_PIN       19 
 
 
 
-#define HEATER_0_PIN       15   // Extruder
-#define HEATER_1_PIN       14   // Bed
-#define FAN_PIN            16   // Fan   
+#define HEATER_0_PIN       21  // Extruder
+#define HEATER_1_PIN       20  // Bed
+#define FAN_PIN            22  // Fan   
 
-#define TEMP_0_PIN          7    // Extruder
-#define TEMP_1_PIN          6    // Bed
+#define TEMP_0_PIN          7  // Extruder
+#define TEMP_1_PIN          6  // Bed
 
-// #define SDPOWER            48
-// #define SDSS               53
+#define SDPOWER            -1
+#define SDSS                8
 #define LED_PIN            -1
 #define PS_ON_PIN          -1
-#define KILL_PIN           -1 //28
+#define KILL_PIN           -1 
 
-//TODO: SDsupport
+#ifndef SDSUPPORT
+// these pins are defined in the SD library if building with SD support  
+  #define SCK_PIN           9 
+  #define MISO_PIN         11 
+  #define MOSI_PIN         10 
+#endif
 
 #endif
 
-- 
cgit v1.2.1