From 8b8f5bf47420238c525b2990747f47c5e3248369 Mon Sep 17 00:00:00 2001
From: midopple <mdoppler@gmx.at>
Date: Mon, 19 Mar 2012 12:20:43 +0100
Subject: Make fastio & Arduino pin numbering consistent for AT90USB128x.
 Thanks to lincomatic

---
 Sprinter/pins.h | 106 ++++++++++++++++++++++++++++----------------------------
 1 file changed, 53 insertions(+), 53 deletions(-)

(limited to 'Sprinter/pins.h')

diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index 315c28e..e35e6a8 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -751,39 +751,39 @@
 #define KNOWN_BOARD 1
 
 
-#define X_STEP_PIN          0  
-#define X_DIR_PIN           1  
-#define X_ENABLE_PIN       39 
-#define X_MIN_PIN          13 
+#define X_STEP_PIN         28
+#define X_DIR_PIN          29
+#define X_ENABLE_PIN       19
+#define X_MIN_PIN          25
 #define X_MAX_PIN          -1    
 
-#define Y_STEP_PIN          2  
-#define Y_DIR_PIN           3 
-#define Y_ENABLE_PIN       38 
-#define Y_MIN_PIN          14 
+#define Y_STEP_PIN         30
+#define Y_DIR_PIN          31
+#define Y_ENABLE_PIN       26
+#define Y_MIN_PIN           20
 #define Y_MAX_PIN          -1    
 
-#define Z_STEP_PIN          4
-#define Z_DIR_PIN           5 
-#define Z_ENABLE_PIN       23 
-#define Z_MIN_PIN          15 
+#define Z_STEP_PIN         32
+#define Z_DIR_PIN          33
+#define Z_ENABLE_PIN       17
+#define Z_MIN_PIN          27
 #define Z_MAX_PIN          -1    
 
-#define E_STEP_PIN          6  
-#define E_DIR_PIN           7 
-#define E_ENABLE_PIN       19 
+#define E_STEP_PIN         34
+#define E_DIR_PIN          35
+#define E_ENABLE_PIN       13
 
 
 
-#define HEATER_0_PIN       21  // Extruder
-#define HEATER_1_PIN       20  // Bed
-#define FAN_PIN            22  // Fan   
+#define HEATER_0_PIN       15  // Extruder
+#define HEATER_1_PIN       14  // Bed
+#define FAN_PIN            16  // Fan   
 
 #define TEMP_0_PIN          7  // Extruder
 #define TEMP_1_PIN          6  // Bed
 
 #define SDPOWER            -1
-#define SDSS                8
+#define SDSS                20
 #define LED_PIN            -1
 #define PS_ON_PIN          -1
 #define KILL_PIN           -1 
@@ -791,9 +791,9 @@
 
 #ifndef SDSUPPORT
 // these pins are defined in the SD library if building with SD support  
-  #define SCK_PIN           9 
-  #define MISO_PIN         11 
-  #define MOSI_PIN         10 
+  #define SCK_PIN          21
+  #define MISO_PIN         22 
+  #define MOSI_PIN         23 
 #endif
 
 #endif
@@ -808,48 +808,48 @@
 #define KNOWN_BOARD 1
 
 
-#define X_STEP_PIN 0
-#define X_DIR_PIN 1
-#define X_ENABLE_PIN 39
-#define X_MIN_PIN 35
-#define X_MAX_PIN -1
+#define X_STEP_PIN         28
+#define X_DIR_PIN          29
+#define X_ENABLE_PIN       19
+#define X_MIN_PIN          47
+#define X_MAX_PIN          -1
 
-#define Y_STEP_PIN 2
-#define Y_DIR_PIN 3
-#define Y_ENABLE_PIN 38
-#define Y_MIN_PIN 8
-#define Y_MAX_PIN -1
+#define Y_STEP_PIN         30
+#define Y_DIR_PIN          31
+#define Y_ENABLE_PIN       18
+#define Y_MIN_PIN           20
+#define Y_MAX_PIN          -1
 
-#define Z_STEP_PIN 4
-#define Z_DIR_PIN 5
-#define Z_ENABLE_PIN 23
-#define Z_MIN_PIN 36
-#define Z_MAX_PIN -1
+#define Z_STEP_PIN         32
+#define Z_DIR_PIN          33
+#define Z_ENABLE_PIN       17
+#define Z_MIN_PIN          36
+#define Z_MAX_PIN          -1
 
-#define E_STEP_PIN 6
-#define E_DIR_PIN 7
-#define E_ENABLE_PIN 19
+#define E_STEP_PIN         34
+#define E_DIR_PIN          35
+#define E_ENABLE_PIN       13
 
 
 
-#define HEATER_0_PIN 21 // Extruder
-#define HEATER_1_PIN 20 // Bed
-#define FAN_PIN 22 // Fan
+#define HEATER_0_PIN       15  // Extruder
+#define HEATER_1_PIN       14  // Bed
+#define FAN_PIN            16  // Fan
 
-#define TEMP_0_PIN 1 // Extruder
-#define TEMP_1_PIN 0 // Bed
+#define TEMP_0_PIN          1  // Extruder
+#define TEMP_1_PIN          0  // Bed
 
-#define SDPOWER -1
-#define SDSS 26
-#define LED_PIN -1
-#define PS_ON_PIN -1
-#define KILL_PIN -1
+#define SDPOWER            -1
+#define SDSS                2
+#define LED_PIN            -1
+#define PS_ON_PIN          -1
+#define KILL_PIN           -1
 
 #ifndef SDSUPPORT
 // these pins are defined in the SD library if building with SD support
-#define SCK_PIN 9
-#define MISO_PIN 11
-#define MOSI_PIN 10
+  #define SCK_PIN          21
+  #define MISO_PIN         22
+  #define MOSI_PIN         23
 #endif
 
 #endif
-- 
cgit v1.2.1