From d49dd1ea8cf4503cec23d28402c61b60468d1fe9 Mon Sep 17 00:00:00 2001
From: rotorit <post@rotorit.no>
Date: Tue, 9 Aug 2011 00:47:44 +0300
Subject: Added support for Gen3-pluss and Gen3-Monolithic Electronics

---
 Sprinter/pins.h | 123 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 123 insertions(+)

(limited to 'Sprinter/pins.h')

diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index 720f3a9..51866ed 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -200,6 +200,129 @@
 
 #endif
 
+/****************************************************************************************
+* Gen3 PLUSS
+*
+****************************************************************************************/
+#if MOTHERBOARD == 21
+#define KNOWN_BOARD 1
+
+#ifndef __AVR_ATmega644P__
+    #error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+
+//x axis pins
+#define X_STEP_PIN      15
+#define X_DIR_PIN       18
+#define X_ENABLE_PIN    19
+#define X_MIN_PIN       20
+#define X_MAX_PIN       -1
+
+//y axis pins
+#define Y_STEP_PIN      23
+#define Y_DIR_PIN       22
+#define Y_ENABLE_PIN    24
+#define Y_MIN_PIN       25
+#define Y_MAX_PIN       -1
+
+//z axis pins
+#define Z_STEP_PIN      27
+#define Z_DIR_PIN       28
+#define Z_ENABLE_PIN    29
+#define Z_MIN_PIN       30
+#define Z_MAX_PIN       -1
+
+#define E_DIR_PIN       21
+#define E_STEP_PIN	17
+#define E_ENABLE_PIN	13
+
+//heaters
+
+//pin for hot end heater
+#define HEATER_0_PIN	12
+
+//Pin for heated bed heater
+#define HEATER_1_PIN	 5
+
+
+//pin for debugging.
+#define DEBUG_PIN        -1
+
+//SD card pin
+
+#define SDSS		  4
+
+#define SDPOWER          -1
+#define FAN_PIN          -1
+#define TEMP_0_PIN        0
+#define TEMP_1_PIN        5
+#define LED_PIN          -1
+
+//pin for controlling the PSU.
+#define PS_ON_PIN       14
+
+#endif
+
+/****************************************************************************************
+* Gen3  Monolithic Electronics
+*
+****************************************************************************************/
+#if MOTHERBOARD == 22
+#define KNOWN_BOARD 1
+
+#ifndef __AVR_ATmega644P__
+    #error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define DEBUG_PIN 0
+
+
+// x axis
+#define X_STEP_PIN 15
+#define X_DIR_PIN 18
+#define X_MIN_PIN 20
+#define X_ENABLE_PIN 24 //actually uses Y_enable_pin
+#define X_MAX_PIN -1
+
+// y axes
+#define Y_STEP_PIN 23
+#define Y_DIR_PIN 22
+#define Y_MIN_PIN 25
+#define Y_ENABLE_PIN 24 //shared with X_enable_pin 
+#define Y_MAX_PIN -1
+
+// z axes
+#define Z_STEP_PIN 27
+#define Z_DIR_PIN 28
+#define Z_MIN_PIN 30
+#define Z_ENABLE_PIN 29
+#define Z_MAX_PIN -1
+
+//extruder pins
+#define E_STEP_PIN 12 
+#define E_DIR_PIN 17
+#define E_ENABLE_PIN 3
+#define HEATER_0_PIN 11
+#define TEMP_0_PIN 0
+
+#define FAN_PIN 16
+
+//bed pins
+#define HEATER_1_PIN 11
+#define TEMP_1_PIN 10
+
+
+#define SDSS		 -1
+#define SDPOWER          -1
+#define LED_PIN          -1
+
+//pin for controlling the PSU.
+#define PS_ON_PIN       14
+
+#endif
+
+
 /****************************************************************************************
 * Arduino Mega pin assignment
 *
-- 
cgit v1.2.1