From 253a4edc56dc9abffec46044ff11749551ccf3fa Mon Sep 17 00:00:00 2001
From: rotorit <post@rotorit.no>
Date: Sun, 25 Sep 2011 17:36:58 +0300
Subject: Edited Sprinter/pins.h via GitHub

---
 Sprinter/pins.h | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 68 insertions(+), 3 deletions(-)

(limited to 'Sprinter')

diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index fd9995d..e88f650 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -204,7 +204,7 @@
 #endif
 
 /****************************************************************************************
-* Gen3 PLUS
+* Gen3 PLUS for RepRap Motherboard V1.2
 *
 ****************************************************************************************/
 #if MOTHERBOARD == 21
@@ -246,7 +246,7 @@
 #define HEATER_0_PIN	12
 
 //Pin for heated bed heater
-#define HEATER_1_PIN	 5
+#define HEATER_1_PIN	 16
 
 
 //pin for debugging.
@@ -268,7 +268,7 @@
 #endif
 
 /****************************************************************************************
-* Gen3  Monolithic Electronics
+* Gen3  Monolithic Electronics 
 *
 ****************************************************************************************/
 #if MOTHERBOARD == 22
@@ -326,6 +326,71 @@
 #endif
 
 
+/****************************************************************************************
+* Gen3 PLUS for TechZone Gen3 Remix Motherboard
+*
+****************************************************************************************/
+#if MOTHERBOARD == 23
+#define KNOWN_BOARD 1
+
+#ifndef __AVR_ATmega644P__
+    #error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+
+//x axis pins
+#define X_STEP_PIN      15
+#define X_DIR_PIN       18
+#define X_ENABLE_PIN    24 //same as E/Y_enable_pin
+#define X_MIN_PIN       20
+#define X_MAX_PIN       -1
+
+//y axis pins
+#define Y_STEP_PIN      23
+#define Y_DIR_PIN       22
+#define Y_ENABLE_PIN    24 //same as E/X_enable_pin
+#define Y_MIN_PIN       25
+#define Y_MAX_PIN       -1
+
+//z axis pins
+#define Z_STEP_PIN      27
+#define Z_DIR_PIN       28
+#define Z_ENABLE_PIN    29
+#define Z_MIN_PIN       30
+#define Z_MAX_PIN       -1
+
+#define E_DIR_PIN        21
+#define E_STEP_PIN	19
+#define E_ENABLE_PIN	24 //same as X/Y_enable_pin
+
+//heaters
+
+//pin for hot end heater
+#define HEATER_0_PIN	16
+
+//Pin for heated bed heater
+#define HEATER_1_PIN	17
+
+
+//pin for debugging.
+#define DEBUG_PIN        -1
+
+//SD card pin
+
+#define SDSS		  4
+
+#define SDPOWER          -1
+#define FAN_PIN          -1
+#define TEMP_0_PIN        0
+#define TEMP_1_PIN        5
+#define LED_PIN          -1
+
+//pin for controlling the PSU.
+#define PS_ON_PIN       14
+
+#endif
+
+
 /****************************************************************************************
 * Arduino Mega pin assignment
 *
-- 
cgit v1.2.1


From 0df9fa2891a084b10f84bf71133f2bbb71e5f460 Mon Sep 17 00:00:00 2001
From: rotorit <post@rotorit.no>
Date: Sun, 25 Sep 2011 17:42:03 +0300
Subject: added Gen3 PLUS for TechZone Gen3 Remix Motherboard and renaming 21

---
 Sprinter/Configuration.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'Sprinter')

diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h
index e246e65..3f2dda2 100644
--- a/Sprinter/Configuration.h
+++ b/Sprinter/Configuration.h
@@ -9,8 +9,9 @@
 // Gen6 = 5, 
 // Sanguinololu up to 1.1 = 6
 // Sanguinololu 1.2 and above = 62
-// Gen 3 Plus = 21
+// Gen Gen3 PLUS for RepRap Motherboard V1.2 = 21
 // gen 3  Monolithic Electronics = 22
+// Gen3 PLUS for TechZone Gen3 Remix Motherboard = 23
 #define MOTHERBOARD 3 
 
 //// Thermistor settings:
-- 
cgit v1.2.1