From 7b44d14a539e55ec4fd6f31dac4a664e54b7ff76 Mon Sep 17 00:00:00 2001
From: Sam Ward <sam@tolon.com.au>
Date: Wed, 11 May 2011 19:41:09 +0800
Subject: extra CRLF

---
 Tonokip_Firmware/Tonokip_Firmware.pde | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'Tonokip_Firmware/Tonokip_Firmware.pde')

diff --git a/Tonokip_Firmware/Tonokip_Firmware.pde b/Tonokip_Firmware/Tonokip_Firmware.pde
index 9c395f8..79663fc 100644
--- a/Tonokip_Firmware/Tonokip_Firmware.pde
+++ b/Tonokip_Firmware/Tonokip_Firmware.pde
@@ -496,7 +496,8 @@ inline void process_commands()
         e_steps_to_take = abs(ediff)*e_steps_per_unit;
         if(feedrate<10)
             feedrate=10;
-        /*//experimental feedrate calc
+        /*
+        //experimental feedrate calc
         if(abs(xdiff)>0.1 && abs(ydiff)>0.1)
             d=sqrt(xdiff*xdiff+ydiff*ydiff);
         else if(abs(xdiff)>0.1)
-- 
cgit v1.2.1


From ae03a834c47ace78fe11acf12b7452a08e4a787f Mon Sep 17 00:00:00 2001
From: Sam Ward <sam@tolon.com.au>
Date: Wed, 11 May 2011 20:17:49 +0800
Subject: Moved function definitions into separate .h file for readability.

---
 Tonokip_Firmware/Tonokip_Firmware.pde | 34 +---------------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)

(limited to 'Tonokip_Firmware/Tonokip_Firmware.pde')

diff --git a/Tonokip_Firmware/Tonokip_Firmware.pde b/Tonokip_Firmware/Tonokip_Firmware.pde
index 161f1b9..33c4297 100644
--- a/Tonokip_Firmware/Tonokip_Firmware.pde
+++ b/Tonokip_Firmware/Tonokip_Firmware.pde
@@ -1,6 +1,7 @@
 // Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
 // Licence: GPL
 
+#include "Tonokip_Firmware.h"
 #include "configuration.h"
 #include "pins.h"
 
@@ -8,39 +9,6 @@
 #include "SdFat.h"
 #endif
 
-void get_command();
-void process_commands();
-
-void manage_inactivity(byte debug);
-
-void manage_heater();
-float temp2analog(int celsius);
-float temp2analogBed(int celsius);
-float analog2temp(int raw);
-float analog2tempBed(int raw);
-
-void FlushSerialRequestResend();
-void ClearToSend();
-
-void get_coordinates();
-void linear_move(unsigned long x_steps_remaining, unsigned long y_steps_remaining, unsigned long z_steps_remaining, unsigned long e_steps_remaining);
-void disable_x();
-void disable_y();
-void disable_z();
-void disable_e();
-void enable_x();
-void enable_y();
-void enable_z();
-void enable_e();
-void do_x_step();
-void do_y_step();
-void do_z_step();
-void do_e_step();
-
-void kill(byte debug);
-
-
-
 // look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html
 // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
 
-- 
cgit v1.2.1