summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Sprinter/BedThermistorTable_100k.h85
-rw-r--r--Sprinter/BedThermistorTable_200k.h42
-rw-r--r--Sprinter/Configuration.h (renamed from Sprinter/configuration.h)152
-rw-r--r--Sprinter/Sprinter.pde2
-rw-r--r--Sprinter/ThermistorTable_100k.h85
-rw-r--r--Sprinter/ThermistorTable_200k.h42
-rw-r--r--Sprinter/ThermistorTable_mendelparts.h45
-rw-r--r--Sprinter/pins.h51
-rw-r--r--Sprinter/thermistortables.h274
9 files changed, 392 insertions, 386 deletions
diff --git a/Sprinter/BedThermistorTable_100k.h b/Sprinter/BedThermistorTable_100k.h
deleted file mode 100644
index 84bc607..0000000
--- a/Sprinter/BedThermistorTable_100k.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef THERMISTORTABLE_H_
-#define THERMISTORTABLE_H_
-
-// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
-// See this page:
-// http://dev.www.reprap.org/bin/view/Main/Thermistor
-// for details of what goes in this table.
-// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
-// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
-// r0: 100000
-// t0: 25
-// r1: 0
-// r2: 4700
-// beta: 4066
-// max adc: 1023
-
-#define BNUMTEMPS 61
-const short bedtemptable[BNUMTEMPS][2] = {
-{ 23 , 300 },
-{ 25 , 295 },
-{ 27 , 290 },
-{ 28 , 285 },
-{ 31 , 280 },
-{ 33 , 275 },
-{ 35 , 270 },
-{ 38 , 265 },
-{ 41 , 260 },
-{ 44 , 255 },
-{ 48 , 250 },
-{ 52 , 245 },
-{ 56 , 240 },
-{ 61 , 235 },
-{ 66 , 230 },
-{ 71 , 225 },
-{ 78 , 220 },
-{ 84 , 215 },
-{ 92 , 210 },
-{ 100 , 205 },
-{ 109 , 200 },
-{ 120 , 195 },
-{ 131 , 190 },
-{ 143 , 185 },
-{ 156 , 180 },
-{ 171 , 175 },
-{ 187 , 170 },
-{ 205 , 165 },
-{ 224 , 160 },
-{ 245 , 155 },
-{ 268 , 150 },
-{ 293 , 145 },
-{ 320 , 140 },
-{ 348 , 135 },
-{ 379 , 130 },
-{ 411 , 125 },
-{ 445 , 120 },
-{ 480 , 115 },
-{ 516 , 110 },
-{ 553 , 105 },
-{ 591 , 100 },
-{ 628 , 95 },
-{ 665 , 90 },
-{ 702 , 85 },
-{ 737 , 80 },
-{ 770 , 75 },
-{ 801 , 70 },
-{ 830 , 65 },
-{ 857 , 60 },
-{ 881 , 55 },
-{ 903 , 50 },
-{ 922 , 45 },
-{ 939 , 40 },
-{ 954 , 35 },
-{ 966 , 30 },
-{ 977 , 25 },
-{ 985 , 20 },
-{ 993 , 15 },
-{ 999 , 10 },
-{ 1004 , 5 },
-{ 1008 , 0 },
-
-};
-
-
-#endif
-
diff --git a/Sprinter/BedThermistorTable_200k.h b/Sprinter/BedThermistorTable_200k.h
deleted file mode 100644
index 3d96aa3..0000000
--- a/Sprinter/BedThermistorTable_200k.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef THERMISTORTABLE_H_
-#define THERMISTORTABLE_H_
-
-// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
-// See this page:
-// http://dev.www.reprap.org/bin/view/Main/Thermistor
-// for details of what goes in this table.
-// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
-// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
-// r0: 100000
-// t0: 25
-// r1: 0
-// r2: 4700
-// beta: 4066
-// max adc: 1023
-
-#define BNUMTEMPS 20
-const short bedtemptable[BNUMTEMPS][2] = {
- {1, 848},
- {54, 275},
- {107, 228},
- {160, 202},
- {213, 185},
- {266, 171},
- {319, 160},
- {372, 150},
- {425, 141},
- {478, 133},
- {531, 125},
- {584, 118},
- {637, 110},
- {690, 103},
- {743, 95},
- {796, 86},
- {849, 77},
- {902, 65},
- {955, 49},
- {1008, 17}
-};
-
-
-#endif
diff --git a/Sprinter/configuration.h b/Sprinter/Configuration.h
index 0a38a6a..54ea8ea 100644
--- a/Sprinter/configuration.h
+++ b/Sprinter/Configuration.h
@@ -1,13 +1,87 @@
-#ifndef PARAMETERS_H
-#define PARAMETERS_H
+#ifndef CONFIGURATION_H
+#define CONFIGURATION_H
-// NO RS485/EXTRUDER CONTROLLER SUPPORT
-// PLEASE VERIFY PIN ASSIGNMENTS FOR YOUR CONFIGURATION!!!!!!!
-#define MOTHERBOARD 3 // ATMEGA168 = 0, SANGUINO = 1, MOTHERBOARD = 2, MEGA/RAMPS = 3, ATMEGA328 = 4, Gen6 = 5, Sanguinololu = 6
-//Comment out to disable SD support
+//BASIC SETTINGS: select your board type, thermistor type, axis scaling, and endstop configuration
+
+// The following define selects which electronics board you have. Please choose the one that matches your setup
+// MEGA/RAMPS up to 1.2 = 3,
+// RAMPS 1.3 = 63
+// Gen6 = 5,
+// Sanguinololu up to 1.1 = 6
+// Sanguinololu 1.2 and above = 62
+#define MOTHERBOARD 3
+
+//Thermistor settings:
+// 1 is 100k thermistor
+// 2 is 200k thermistor
+// 3 is mendel-parts thermistor
+#define THERMISTORHEATER 1
+#define THERMISTORBED 1
+
+
+//Calibration variables
+//X, Y, Z, E steps per unit - Metric Prusa Mendel with Wade extruder:
+float axis_steps_per_unit[] = {80, 80, 3200/1.25,700};
+//Metric Prusa Mendel with Makergear geared stepper extruder:
+//float axis_steps_per_unit[] = {80,80,3200/1.25,1380};
+
+
+////Endstop Settings
+#define ENDSTOPPULLUPS 1 // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
+//The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
+const bool ENDSTOPS_INVERTING = false; //set to true to invert the logic of the endstops
+
+//This determines the communication speed of the printer
+#define BAUDRATE 115200
+
+//Comment out (using // at the start of the line) to disable SD support:
#define SDSUPPORT 1
+
+
+
+
+//ADVANCED SETTINGS - to tweak parameters
+
+#include "thermistortables.h"
+
+//For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
+const bool X_ENABLE_ON = 0;
+const bool Y_ENABLE_ON = 0;
+const bool Z_ENABLE_ON = 0;
+const bool E_ENABLE_ON = 0;
+
+//Disables axis when it's not being used.
+const bool DISABLE_X = false;
+const bool DISABLE_Y = false;
+const bool DISABLE_Z = true;
+const bool DISABLE_E = false;
+
+const bool INVERT_X_DIR = false;
+const bool INVERT_Y_DIR = false;
+const bool INVERT_Z_DIR = true;
+const bool INVERT_E_DIR = false;
+
+//ENDSTOP SETTINGS:
+// Sets direction of endstops when homing; 1=MAX, -1=MIN
+const int X_HOME_DIR = -1;
+const int Y_HOME_DIR = -1;
+const int Z_HOME_DIR = -1;
+
+const bool min_software_endstops = false; //If true, axis won't move to coordinates less than zero.
+const bool max_software_endstops = true; //If true, axis won't move to coordinates greater than the defined lengths below.
+const int X_MAX_LENGTH = 200;
+const int Y_MAX_LENGTH = 200;
+const int Z_MAX_LENGTH = 100;
+
+
+//MOVEMENT SETTINGS
+const int NUM_AXIS = 4; // The axis order in all axis related arrays is X, Y, Z, E
+float max_feedrate[] = {200000, 200000, 240, 500000};
+bool axis_relative_modes[] = {false, false, false, false};
+
+
//Min step delay in microseconds. If you are experiencing missing steps, try to raise the delay microseconds, but be aware this
// If you enable this, make sure STEP_DELAY_RATIO is disabled.
//#define STEP_DELAY_MICROS 1
@@ -63,13 +137,13 @@ long max_travel_acceleration_units_per_sq_second[] = {500,500,50}; // X, Y, Z ma
//If the temperature has not increased at the end of that period, the target temperature is set to zero. It can be reset with another M104/M109
//#define WATCHPERIOD 5000 //5 seconds
//The minimal temperature defines the temperature below which the heater will not be enabled
-//#define MINTEMP
+#define MINTEMP 5
//Experimental max temp
//When temperature exceeds max temp, your bot will halt.
//This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
//You should use MINTEMP for thermistor short/failure protection.
-//#define MAXTEMP 275
+#define MAXTEMP 275
// Select one of these only to define how the nozzle temp is read.
#define HEATER_USES_THERMISTOR
@@ -80,69 +154,7 @@ long max_travel_acceleration_units_per_sq_second[] = {500,500,50}; // X, Y, Z ma
#define BED_USES_THERMISTOR
//#define BED_USES_AD595
-// Calibration formulas
-// e_extruded_steps_per_mm = e_feedstock_steps_per_mm * (desired_extrusion_diameter^2 / feedstock_diameter^2)
-// new_axis_steps_per_mm = previous_axis_steps_per_mm * (test_distance_instructed/test_distance_traveled)
-// units are in millimeters or whatever length unit you prefer: inches,football-fields,parsecs etc
-
-//Calibration variables
-const int NUM_AXIS = 4; // The axis order in all axis related arrays is X, Y, Z, E
-bool axis_relative_modes[] = {false, false, false, false};
-float axis_steps_per_unit[] = {80.376,80.376,3200/1.25,16}; // {X steps per unit, Y steps per unit, Z steps per unit, E steps per unit}
-//For SAE Prusa mendeel float z_steps_per_unit = should be 3200/1.411 for 5/16-18 rod and 3200/1.058 for 5/16-24
-//float axis_steps_per_unit[] = {10.047,10.047,833.398,0.706};
-float max_feedrate[] = {200000, 200000, 240, 500000}; //mmm, acceleration!
-
-//For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-const bool X_ENABLE_ON = 0;
-const bool Y_ENABLE_ON = 0;
-const bool Z_ENABLE_ON = 0;
-const bool E_ENABLE_ON = 0;
-
-//Disables axis when it's not being used.
-const bool DISABLE_X = false;
-const bool DISABLE_Y = false;
-const bool DISABLE_Z = true;
-const bool DISABLE_E = false;
-
-const bool INVERT_X_DIR = false;
-const bool INVERT_Y_DIR = false;
-const bool INVERT_Z_DIR = true;
-const bool INVERT_E_DIR = false;
-
-// Sets direction of endstops when homing; 1=MAX, -1=MIN
-const int X_HOME_DIR = -1;
-const int Y_HOME_DIR = -1;
-const int Z_HOME_DIR = -1;
-
-//Thermistor settings:
-
-//Uncomment for 100k thermistor
-//#include "ThermistorTable_100k.h"
-//#include "BedThermistorTable_100k.h"
-
-//Uncomment for 200k thermistor
-//#include "ThermistorTable_200k.h"
-//#include "BedThermistorTable_200k.h"
-
-//Identical thermistors on heater and bed - use this if you have no heated bed or if the thermistors are the same on both:
-#include "ThermistorTable_200k.h"
-//#include "ThermistorTable_100k.h"
-//#include "ThermistorTable_mendelparts.h"
-#define BNUMTEMPS NUMTEMPS
-#define bedtemptable temptable
-
-//Endstop Settings
-#define ENDSTOPPULLUPS 1
-const bool ENDSTOPS_INVERTING = false;
-const bool min_software_endstops = false; //If true, axis won't move to coordinates less than zero.
-const bool max_software_endstops = true; //If true, axis won't move to coordinates greater than the defined lengths below.
-const int X_MAX_LENGTH = 220;
-const int Y_MAX_LENGTH = 220;
-const int Z_MAX_LENGTH = 100;
-
-#define BAUDRATE 115200
//Uncomment the following line to enable debugging. You can better control debugging below the following line
//#define DEBUG
diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde
index e697231..733aec8 100644
--- a/Sprinter/Sprinter.pde
+++ b/Sprinter/Sprinter.pde
@@ -2,7 +2,7 @@
// Licence: GPL
#include "Sprinter.h"
-#include "configuration.h"
+#include "Configuration.h"
#include "pins.h"
#ifdef SDSUPPORT
diff --git a/Sprinter/ThermistorTable_100k.h b/Sprinter/ThermistorTable_100k.h
deleted file mode 100644
index d0698b2..0000000
--- a/Sprinter/ThermistorTable_100k.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef THERMISTORTABLE_H_
-#define THERMISTORTABLE_H_
-
-// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
-// See this page:
-// http://dev.www.reprap.org/bin/view/Main/Thermistor
-// for details of what goes in this table.
-// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
-// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
-// r0: 100000
-// t0: 25
-// r1: 0
-// r2: 4700
-// beta: 4066
-// max adc: 1023
-
-#define NUMTEMPS 61
-const short temptable[NUMTEMPS][2] = {
-{ 23 , 300 },
-{ 25 , 295 },
-{ 27 , 290 },
-{ 28 , 285 },
-{ 31 , 280 },
-{ 33 , 275 },
-{ 35 , 270 },
-{ 38 , 265 },
-{ 41 , 260 },
-{ 44 , 255 },
-{ 48 , 250 },
-{ 52 , 245 },
-{ 56 , 240 },
-{ 61 , 235 },
-{ 66 , 230 },
-{ 71 , 225 },
-{ 78 , 220 },
-{ 84 , 215 },
-{ 92 , 210 },
-{ 100 , 205 },
-{ 109 , 200 },
-{ 120 , 195 },
-{ 131 , 190 },
-{ 143 , 185 },
-{ 156 , 180 },
-{ 171 , 175 },
-{ 187 , 170 },
-{ 205 , 165 },
-{ 224 , 160 },
-{ 245 , 155 },
-{ 268 , 150 },
-{ 293 , 145 },
-{ 320 , 140 },
-{ 348 , 135 },
-{ 379 , 130 },
-{ 411 , 125 },
-{ 445 , 120 },
-{ 480 , 115 },
-{ 516 , 110 },
-{ 553 , 105 },
-{ 591 , 100 },
-{ 628 , 95 },
-{ 665 , 90 },
-{ 702 , 85 },
-{ 737 , 80 },
-{ 770 , 75 },
-{ 801 , 70 },
-{ 830 , 65 },
-{ 857 , 60 },
-{ 881 , 55 },
-{ 903 , 50 },
-{ 922 , 45 },
-{ 939 , 40 },
-{ 954 , 35 },
-{ 966 , 30 },
-{ 977 , 25 },
-{ 985 , 20 },
-{ 993 , 15 },
-{ 999 , 10 },
-{ 1004 , 5 },
-{ 1008 , 0 },
-
-};
-
-
-#endif
-
diff --git a/Sprinter/ThermistorTable_200k.h b/Sprinter/ThermistorTable_200k.h
deleted file mode 100644
index 4142eb2..0000000
--- a/Sprinter/ThermistorTable_200k.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef THERMISTORTABLE_H_
-#define THERMISTORTABLE_H_
-
-// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)
-// See this page:
-// http://dev.www.reprap.org/bin/view/Main/Thermistor
-// for details of what goes in this table.
-// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)
-// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=4066 --max-adc=1023
-// r0: 100000
-// t0: 25
-// r1: 0
-// r2: 4700
-// beta: 4066
-// max adc: 1023
-
-#define NUMTEMPS 20
-const short temptable[NUMTEMPS][2] = {
- {1, 848},
- {54, 275},
- {107, 228},
- {160, 202},
- {213, 185},
- {266, 171},
- {319, 160},
- {372, 150},
- {425, 141},
- {478, 133},
- {531, 125},
- {584, 118},
- {637, 110},
- {690, 103},
- {743, 95},
- {796, 86},
- {849, 77},
- {902, 65},
- {955, 49},
- {1008, 17}
-};
-
-
-#endif
diff --git a/Sprinter/ThermistorTable_mendelparts.h b/Sprinter/ThermistorTable_mendelparts.h
deleted file mode 100644
index 9e65b85..0000000
--- a/Sprinter/ThermistorTable_mendelparts.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef THERMISTORTABLE_H_
-#define THERMISTORTABLE_H_
-
-//thermistor table for mendel-parts thermistor
-// Standardized R/T characteristic no. 8404
- // RS thermistor 484-0183; EPCOS NTC
- // Mendel-Parts thermistor G540 / G550
- // Optimized for 100...300C working range.
- // Max range: -20...300C
- // Max reading error on Gen 6 electronics: ~+5%, -3% in 100 - 300C range.
-
-#define NUMTEMPS 28
-const short temptable[NUMTEMPS][2] = {
- {1,864},
- {21,300},
- {25,290},
- {29,280},
- {33,270},
- {39,260},
- {46,250},
- {54,240},
- {64,230},
- {75,220},
- {90,210},
- {107,200},
- {128,190},
- {154,180},
- {184,170},
- {221,160},
- {265,150},
- {316,140},
- {375,130},
- {441,120},
- {513,110},
- {588,100},
- {734,80},
- {856,60},
- {938,40},
- {986,20},
- {1008,0},
- {1018,-20}
- };
-
-
-#endif
diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index eee78e8..7540ebc 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -23,6 +23,8 @@
* +----+
****************************************************************************************/
#if MOTHERBOARD == 0
+#define KNOWN_BOARD 1
+
#ifndef __AVR_ATmega168__
#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu.
#endif
@@ -60,7 +62,7 @@
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
-
+#endif
@@ -93,7 +95,9 @@
* +--------+
*
****************************************************************************************/
-#elif MOTHERBOARD == 1
+#if MOTHERBOARD == 1
+#define KNOWN_BOARD 1
+
#ifndef __AVR_ATmega644P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
@@ -134,14 +138,16 @@
-
+#endif
/****************************************************************************************
* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---*******
*
****************************************************************************************/
-#elif MOTHERBOARD == 2
+#if MOTHERBOARD == 2
+#define KNOWN_BOARD 1
+
#ifndef __AVR_ATmega644P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
@@ -192,13 +198,19 @@
-
+#endif
/****************************************************************************************
* Arduino Mega pin assignment
*
****************************************************************************************/
-#elif MOTHERBOARD == 3
+#if MOTHERBOARD == 33
+#define MOTHERBOARD 3
+#define RAMPS_V_1_3
+#endif
+#if MOTHERBOARD == 3
+#define KNOWN_BOARD 1
+
//////////////////FIX THIS//////////////
#ifndef __AVR_ATmega1280__
#ifndef __AVR_ATmega2560__
@@ -210,7 +222,6 @@
// #define RAMPS_V_1_3
// #define RAMPS_V_1_0
-
#ifdef RAMPS_V_1_3
#define X_STEP_PIN 54
@@ -307,12 +318,14 @@
#endif
-
+#endif
/****************************************************************************************
* Duemilanove w/ ATMega328P pin assignment
*
****************************************************************************************/
-#elif MOTHERBOARD == 4
+#if MOTHERBOARD == 4
+#define KNOWN_BOARD 1
+
#ifndef __AVR_ATmega328P__
#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
#endif
@@ -350,13 +363,14 @@
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
-
+#endif
/****************************************************************************************
* Gen6 pin assignment
*
****************************************************************************************/
-#elif MOTHERBOARD == 5
+#if MOTHERBOARD == 5
+#define KNOWN_BOARD 1
#ifndef __AVR_ATmega644P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
@@ -393,7 +407,7 @@
#define SDPOWER -1
- #define SDSS -1
+ #define SDSS 17
#define LED_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define FAN_PIN -1 //changed @ rkoeppl 20110410
@@ -406,12 +420,17 @@
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
-
+#endif
/****************************************************************************************
* Sanguinololu pin assignment
*
****************************************************************************************/
-#elif MOTHERBOARD == 6
+#if MOTHERBOARD == 62
+#define MOTHERBOARD 6
+#define
+#endif
+#if MOTHERBOARD == 6
+#define KNOWN_BOARD 1
#ifndef __AVR_ATmega644P__
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
#endif
@@ -468,9 +487,9 @@
#define SDPOWER -1
#define SDSS 31
-#else
-
+#ifndef KNOWN_BOARD
#error Unknown MOTHERBOARD value in configuration.h
+#endif
#endif
diff --git a/Sprinter/thermistortables.h b/Sprinter/thermistortables.h
new file mode 100644
index 0000000..e21b647
--- /dev/null
+++ b/Sprinter/thermistortables.h
@@ -0,0 +1,274 @@
+#ifndef THERMISTORTABLES_H_
+#define THERMISTORTABLES_H_
+
+#if THERMISTORHEATER == 1 //100k bed thermistor
+
+
+#define NUMTEMPS 61
+const short temptable[NUMTEMPS][2] = {
+{ 23 , 300 },
+{ 25 , 295 },
+{ 27 , 290 },
+{ 28 , 285 },
+{ 31 , 280 },
+{ 33 , 275 },
+{ 35 , 270 },
+{ 38 , 265 },
+{ 41 , 260 },
+{ 44 , 255 },
+{ 48 , 250 },
+{ 52 , 245 },
+{ 56 , 240 },
+{ 61 , 235 },
+{ 66 , 230 },
+{ 71 , 225 },
+{ 78 , 220 },
+{ 84 , 215 },
+{ 92 , 210 },
+{ 100 , 205 },
+{ 109 , 200 },
+{ 120 , 195 },
+{ 131 , 190 },
+{ 143 , 185 },
+{ 156 , 180 },
+{ 171 , 175 },
+{ 187 , 170 },
+{ 205 , 165 },
+{ 224 , 160 },
+{ 245 , 155 },
+{ 268 , 150 },
+{ 293 , 145 },
+{ 320 , 140 },
+{ 348 , 135 },
+{ 379 , 130 },
+{ 411 , 125 },
+{ 445 , 120 },
+{ 480 , 115 },
+{ 516 , 110 },
+{ 553 , 105 },
+{ 591 , 100 },
+{ 628 , 95 },
+{ 665 , 90 },
+{ 702 , 85 },
+{ 737 , 80 },
+{ 770 , 75 },
+{ 801 , 70 },
+{ 830 , 65 },
+{ 857 , 60 },
+{ 881 , 55 },
+{ 903 , 50 },
+{ 922 , 45 },
+{ 939 , 40 },
+{ 954 , 35 },
+{ 966 , 30 },
+{ 977 , 25 },
+{ 985 , 20 },
+{ 993 , 15 },
+{ 999 , 10 },
+{ 1004 , 5 },
+{ 1008 , 0 } //safety
+};
+
+#elif THERMISTORHEATER == 2 //200k bed thermistor
+#define NUMTEMPS 21
+const short temptable[NUMTEMPS][2] = {
+ {1, 848},
+ {54, 275},
+ {107, 228},
+ {160, 202},
+ {213, 185},
+ {266, 171},
+ {319, 160},
+ {372, 150},
+ {425, 141},
+ {478, 133},
+ {531, 125},
+ {584, 118},
+ {637, 110},
+ {690, 103},
+ {743, 95},
+ {796, 86},
+ {849, 77},
+ {902, 65},
+ {955, 49},
+ {1008, 17},
+ {1020, 0} //safety
+};
+
+#elif THERMISTORHEATER == 3 //mendel-parts
+#define NUMTEMPS 28
+const short temptable[NUMTEMPS][2] = {
+ {1,864},
+ {21,300},
+ {25,290},
+ {29,280},
+ {33,270},
+ {39,260},
+ {46,250},
+ {54,240},
+ {64,230},
+ {75,220},
+ {90,210},
+ {107,200},
+ {128,190},
+ {154,180},
+ {184,170},
+ {221,160},
+ {265,150},
+ {316,140},
+ {375,130},
+ {441,120},
+ {513,110},
+ {588,100},
+ {734,80},
+ {856,60},
+ {938,40},
+ {986,20},
+ {1008,0},
+ {1018,-20}
+ };
+
+#else
+#error No thermistor table specified
+
+#endif
+
+
+#if THERMISTORHEATER==THERMISTORBED
+#define BNUMTEMPS NUMTEMPS
+#define bedtemptable temptable
+#else
+#if THERMISTORBED == 1 //100k bed thermistor
+
+
+#define BNUMTEMPS 61
+const short bedtemptable[BNUMTEMPS][2] = {
+{ 23 , 300 },
+{ 25 , 295 },
+{ 27 , 290 },
+{ 28 , 285 },
+{ 31 , 280 },
+{ 33 , 275 },
+{ 35 , 270 },
+{ 38 , 265 },
+{ 41 , 260 },
+{ 44 , 255 },
+{ 48 , 250 },
+{ 52 , 245 },
+{ 56 , 240 },
+{ 61 , 235 },
+{ 66 , 230 },
+{ 71 , 225 },
+{ 78 , 220 },
+{ 84 , 215 },
+{ 92 , 210 },
+{ 100 , 205 },
+{ 109 , 200 },
+{ 120 , 195 },
+{ 131 , 190 },
+{ 143 , 185 },
+{ 156 , 180 },
+{ 171 , 175 },
+{ 187 , 170 },
+{ 205 , 165 },
+{ 224 , 160 },
+{ 245 , 155 },
+{ 268 , 150 },
+{ 293 , 145 },
+{ 320 , 140 },
+{ 348 , 135 },
+{ 379 , 130 },
+{ 411 , 125 },
+{ 445 , 120 },
+{ 480 , 115 },
+{ 516 , 110 },
+{ 553 , 105 },
+{ 591 , 100 },
+{ 628 , 95 },
+{ 665 , 90 },
+{ 702 , 85 },
+{ 737 , 80 },
+{ 770 , 75 },
+{ 801 , 70 },
+{ 830 , 65 },
+{ 857 , 60 },
+{ 881 , 55 },
+{ 903 , 50 },
+{ 922 , 45 },
+{ 939 , 40 },
+{ 954 , 35 },
+{ 966 , 30 },
+{ 977 , 25 },
+{ 985 , 20 },
+{ 993 , 15 },
+{ 999 , 10 },
+{ 1004 , 5 },
+{ 1008 , 0 } //safety
+};
+
+#elif THERMISTORBED == 2 //200k bed thermistor
+#define BNUMTEMPS 21
+const short bedtemptable[BNUMTEMPS][2] = {
+ {1, 848},
+ {54, 275},
+ {107, 228},
+ {160, 202},
+ {213, 185},
+ {266, 171},
+ {319, 160},
+ {372, 150},
+ {425, 141},
+ {478, 133},
+ {531, 125},
+ {584, 118},
+ {637, 110},
+ {690, 103},
+ {743, 95},
+ {796, 86},
+ {849, 77},
+ {902, 65},
+ {955, 49},
+ {1008, 17},
+ {1020, 0} //safety
+};
+
+#elif THERMISTORBED == 3 //mendel-parts
+#define BNUMTEMPS 28
+const short bedtemptable[BNUMTEMPS][2] = {
+ {1,864},
+ {21,300},
+ {25,290},
+ {29,280},
+ {33,270},
+ {39,260},
+ {46,250},
+ {54,240},
+ {64,230},
+ {75,220},
+ {90,210},
+ {107,200},
+ {128,190},
+ {154,180},
+ {184,170},
+ {221,160},
+ {265,150},
+ {316,140},
+ {375,130},
+ {441,120},
+ {513,110},
+ {588,100},
+ {734,80},
+ {856,60},
+ {938,40},
+ {986,20},
+ {1008,0},
+ {1018,-20}
+ };
+#else
+#error No bed thermistor table specified
+
+#endif
+
+
+#endif //if THERMISTORHEATER==THERMISTORBED
+#endif //THERMISTORTABLES_H_
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-23 03:29:07 +0000