diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 7 |
1 files changed, 3 insertions, 4 deletions
@@ -51,7 +51,7 @@ follow the sanguino's readme so that your arduino hardware folder looks like 4. Clone the Sprinter git repository.
git clone https://github.com/kliment/Sprinter.git
-Optionally, swicht to the desired branch
+Optionally, switch to the desired branch
git branch -a
git checkout THE_BRANCH_YOU_WANT
@@ -61,7 +61,7 @@ Firmware compilation and upload 5. Edit INSTALL_DIR inside Sprinter/Makefile (do not mind the default reference to arduino 0022)
6. Run make. If everything goes well Sprinter/applet/Sprinter.cpp should have been created.
-You can safelly ignore the error message mentioning arduino-0018/hardware/arduino/cores/arduino/WString.o
+You can safely ignore the error message mentioning arduino-0018/hardware/arduino/cores/arduino/WString.o
7. Connect your Sanguinololu to your computer
http://reprap.org/wiki/Sanguinololu
@@ -94,7 +94,7 @@ If everything goes well you should see the message "Done uploading". Congratulations, you have just upgraded the firmware of your RepRap !
-You can use the pronterface to do some manual verifications by moving the printer's tip along
+You can use pronterface.py to do some manual verifications by moving the printer's tip along
the axes and verifying that the physical displacements match the ones indicated on the interface.
@@ -104,4 +104,3 @@ the axes and verifying that the physical displacements match the ones indicated -
|