From 82bdbc233a88ec3fc61a93f83a230cba05dee60c Mon Sep 17 00:00:00 2001 From: midopple Date: Tue, 12 Jun 2012 22:22:01 +0200 Subject: Update README to Arduino Version 0023 --- README | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/README b/README index 0100e80..f3542c0 100644 --- a/README +++ b/README @@ -40,17 +40,17 @@ Software installation 1. Install the required packages (gcc-avr, avr-libc, etc.) sudo apt-get install arduino-core -2. Get the arduino software version 0018 (0023 works for RAMPS), uncompress it in a directory. +2. Get the arduino software version 0023, uncompress it in a directory. Arduino software v1 has not been tested much, but is known to work with some boards. http://www.arduino.cc/en/Main/Software -3. Get the sanguino software, version 0018 +3. Get the sanguino software, version 0023 http://sanguino.cc/softwareforlinux follow the sanguino's readme so that your arduino hardware folder looks like - arduino-0018/hardware/arduino - arduino-0018/hardware/sanguino - arduino-0018/hardware/tools + arduino-0023/hardware/arduino + arduino-0023/hardware/sanguino + arduino-0023/hardware/tools 4. Clone the Sprinter git repository. git clone https://github.com/kliment/Sprinter.git @@ -64,12 +64,12 @@ Firmware compilation and upload 5. Edit INSTALL_DIR inside Sprinter/Makefile (do not mind the default reference to arduino 0022) 6. Run make. If everything goes well Sprinter/applet/Sprinter.cpp should have been created. -You can safely ignore the error message mentioning arduino-0018/hardware/arduino/cores/arduino/WString.o +You can safely ignore the error message mentioning arduino-0023/hardware/arduino/cores/arduino/WString.o 7. Connect your Sanguinololu to your computer http://reprap.org/wiki/Sanguinololu -8. Launch arduino-0018/arduino, open Sprinter/Sprinter.pde +8. Launch arduino-0023/arduino, open Sprinter/Sprinter.pde 9. Go to Tools -> Serial Port, and select the relevant option -- cgit v1.2.1 From eda666ce3332a13602b15466dae7f5a2199c0aaa Mon Sep 17 00:00:00 2001 From: MrAlvinTesting Date: Sat, 23 Jun 2012 17:46:14 +0300 Subject: Update master --- Sprinter/pins.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/Sprinter/pins.h b/Sprinter/pins.h index 63ea464..afe99bc 100644 --- a/Sprinter/pins.h +++ b/Sprinter/pins.h @@ -96,6 +96,36 @@ * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM * +--------+ * +**************************************************************************************** +* +* ATMega644P (SMD) +* +* +--------+ +* MOSI (D 5) PB5 1| O |44 PB4 (D 4) PWM +* MISO (D 6) PB6 2| |43 PB3 (D 3) PWM +* SCK (D 7) PB7 3| |42 PB2 (D 2) INT2 +* RST 4| |41 PB1 (D 1) +* Vcc 5| |40 PB0 (D 0) +* GND 6| |39 GND +* XTAL2 7| |38 Vcc +* XTAL1 8| |37 PA0 (AI 0 / D31) +* RX0 (D 8) PD0 9| |36 PA1 (AI 1 / D30) +* TX0 (D 9) PD1 10| |35 PA2 (AI 2 / D29) +* INT0 RX1 (D 10) PD2 11| |34 PA3 (AI 3 / D28) +* + + +* INT1 TX1 (D 11) PD3 12| |33 PA4 (AI 4 / D27) +* PWM (D 12) PD4 13| |32 PA5 (AI 5 / D26) +* PWM (D 13) PD5 14| |31 PA6 (AI 6 / D25) +* PWM (D 14) PD6 15| |30 PA7 (AI 7 / D24) +* PWM (D 15) PD7 16| |29 AREF +* Vcc 17| |28 GND +* GND 18| |27 AVCC +* (D 16) PC0 19| |26 PC7 (D 23) +* (D 17) PC1 20| |25 PC6 (D 22) +* (D 18) PC2 21| |24 PC5 (D 21) TDI +* (D 19) PC3 22| |23 PC4 (D 20) TDO +* +--------+ +* ****************************************************************************************/ #if MOTHERBOARD == 1 #define KNOWN_BOARD 1 -- cgit v1.2.1