From 646684a5e4a38d520d4ac84ba7b511a50c96ddfb Mon Sep 17 00:00:00 2001 From: Emanuele Caruso Date: Sun, 3 Apr 2011 20:15:18 +0200 Subject: Updated README with important information on how to configure thermistor table(s) --- README | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'README') diff --git a/README b/README index 8656c0d..daff570 100644 --- a/README +++ b/README @@ -4,6 +4,11 @@ This work is licensed under the GNU GPL v3 or (at the user's discretion) any lat It is based on Tonokips's firmware, which was licensed under GPL v2 or later. - - - +WARNING: The configuration file now has a value to set the wanted temperature table file. If you copy and paste a temperature file from older versions, make sure that the configuration is pointing to it. For example: +#include "ThermistorTable.h" + +WARNING_2: In addition, you can optionally use a different thermistor table for hot-end and bed. To do so, comment the following line in configuration.h: +#define bedtemptable temptable +Then add a line pointing to your second thermistor table, for example: +#include "BedThermistorTable.h" +Finally, make sure that the nozzle thermistor table, inside ThermistorTable.h in this case, is defined as "temptable" and that the bed thermistor table is defined as "bedtemptable". -- cgit v1.2.1