From b0fc85c98d7a019f11d48084d9adc4f6b2fe728f Mon Sep 17 00:00:00 2001 From: midopple Date: Tue, 13 Mar 2012 14:07:57 +0100 Subject: Info about GEN7 @ 20Mhz right Fuses settings for Bootloader --- README | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'README') diff --git a/README b/README index 83a7c9c..5d5664d 100644 --- a/README +++ b/README @@ -95,6 +95,10 @@ also for the mentioned hardware setup 13. Click on "the arrow going to the right" button to upload (you had done steps 7,8,9 before, right ?). If everything goes well you should see the message "Done uploading". +if GEN7 with 20 Mhz is in use set the Fuses for Bootloader to +lfuse= 0xF7 hfuse = 0xD4 efuse = FD +Brownout must be 2,7 V + Congratulations, you have just upgraded the firmware of your RepRap ! You can use pronterface.py to do some manual verifications by moving the printer's tip along -- cgit v1.2.1