From 7b21a2a055047490e6c1f7cba5d0fb18dbd38688 Mon Sep 17 00:00:00 2001
From: midopple <mdoppler@gmx.at>
Date: Mon, 6 Feb 2012 08:45:25 +0100
Subject: Add pin definition for the Printrboard Rev B --> Thaks to lwalkera

---
 Sprinter/pins.h | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

(limited to 'Sprinter')

diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index 25dbd54..2ff7513 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -789,6 +789,62 @@
 
 #endif
 
+/****************************************************************************************
+* Printrboard Rev. B pin assingments (ATMEGA90USB1286)
+* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE!
+* See http://reprap.org/wiki/Printrboard for more info
+****************************************************************************************/
+#if MOTHERBOARD == 9
+#define MOTHERBOARD 9
+#define KNOWN_BOARD 1
+
+
+#define X_STEP_PIN 0
+#define X_DIR_PIN 1
+#define X_ENABLE_PIN 39
+#define X_MIN_PIN 35
+#define X_MAX_PIN -1
+
+#define Y_STEP_PIN 2
+#define Y_DIR_PIN 3
+#define Y_ENABLE_PIN 38
+#define Y_MIN_PIN 8
+#define Y_MAX_PIN -1
+
+#define Z_STEP_PIN 4
+#define Z_DIR_PIN 5
+#define Z_ENABLE_PIN 23
+#define Z_MIN_PIN 36
+#define Z_MAX_PIN -1
+
+#define E_STEP_PIN 6
+#define E_DIR_PIN 7
+#define E_ENABLE_PIN 19
+
+
+
+#define HEATER_0_PIN 21 // Extruder
+#define HEATER_1_PIN 20 // Bed
+#define FAN_PIN 22 // Fan
+
+#define TEMP_0_PIN 1 // Extruder
+#define TEMP_1_PIN 0 // Bed
+
+#define SDPOWER -1
+#define SDSS 26
+#define LED_PIN -1
+#define PS_ON_PIN -1
+#define KILL_PIN -1
+
+#ifndef SDSUPPORT
+// these pins are defined in the SD library if building with SD support
+#define SCK_PIN 9
+#define MISO_PIN 11
+#define MOSI_PIN 10
+#endif
+
+#endif
+
 #ifndef KNOWN_BOARD
 #error Unknown MOTHERBOARD value in configuration.h
 #endif
-- 
cgit v1.2.1