From e24333033826c2f6ce7b76ff422e3011448ec250 Mon Sep 17 00:00:00 2001 From: kliment Date: Mon, 2 May 2011 23:19:36 +0200 Subject: Fix trailing semicolon in #define --- Tonokip_Firmware/configuration.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Tonokip_Firmware') diff --git a/Tonokip_Firmware/configuration.h b/Tonokip_Firmware/configuration.h index 2e1820d..e4f6773 100644 --- a/Tonokip_Firmware/configuration.h +++ b/Tonokip_Firmware/configuration.h @@ -9,12 +9,12 @@ #define SDSUPPORT 1 //Min step delay in microseconds. If you are experiencing missing steps, try to raise the delay microseconds, but be aware this -//may probably prevent the motors from reaching the nominal speed. If you enable this, make sure STEP_DELAY_RATIO is disabled. -#define STEP_DELAY_MICROS 1; +// If you enable this, make sure STEP_DELAY_RATIO is disabled. +#define STEP_DELAY_MICROS 1 //Step delay over interval ratio. If you are still experiencing missing steps, try to uncomment the following line, but be aware this -//may probably prevent the motors from reaching the nominal speed. If you enable this, make sure STEP_DELAY_MICROS is disabled. -//#define STEP_DELAY_RATIO 0.05 +//If you enable this, make sure STEP_DELAY_MICROS is disabled. +//#define STEP_DELAY_RATIO 0.25 //Acceleration settings float full_velocity_units = 10; // the units between minimum and G1 move feedrate -- cgit v1.2.1