2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>

	* basic.texi: Add note about last-resort crash logging to /var/tmp
	  when file logging is not configured.
	* quagga.info: updated build of autogenerated file

3 files changed, 171 insertions, 152 deletions

diff --git a/doc/ChangeLog b/doc/ChangeLog
index bcff827e..641e156c 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,9 @@
+2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
+
+	* basic.texi: Add note about last-resort crash logging to /var/tmp
+	  when file logging is not configured.
+	* quagga.info: updated build of autogenerated file
+
 2005-01-24 Paul Jakma <paul@dishone.st>
 
 	* quagga.info: Version bump (autogenerated)
diff --git a/doc/basic.texi b/doc/basic.texi
index cbbdea49..9c6b59a4 100644
--- a/doc/basic.texi
+++ b/doc/basic.texi
@@ -116,6 +116,12 @@ If the optional second argument specifying the
 logging level is not present, the default logging level (typically debugging,
 but can be changed using the deprecated @code{log trap} command) will be used.
 The @code{no} form of the command disables logging to a file.
+
+Note: if you do not configure any file logging, and a daemon crashes due
+to a signal or an assertion failure, it will attempt to save the crash
+information in a file named /var/tmp/quagga.<daemon name>.crashlog.
+For security reasons, this will not happen if the file exists already, so
+it is important to delete the file after reporting the crash information.
 @end deffn
 
 @deffn Command {log syslog} {}
diff --git a/doc/quagga.info b/doc/quagga.info
index b48285c6..a347b411 100644
--- a/doc/quagga.info
+++ b/doc/quagga.info
@@ -778,6 +778,13 @@ File: quagga.info,  Node: Basic Config Commands,  Next: Sample Config File,  Up:
      can be changed using the deprecated `log trap' command) will be
      used.  The `no' form of the command disables logging to a file.
 
+     Note: if you do not configure any file logging, and a daemon
+     crashes due to a signal or an assertion failure, it will attempt
+     to save the crash information in a file named
+     /var/tmp/quagga.<daemon name>.crashlog.  For security reasons,
+     this will not happen if the file exists already, so it is
+     important to delete the file after reporting the crash information.
+
  -- Command: log syslog
  -- Command: log syslog LEVEL
  -- Command: no log syslog
@@ -5177,7 +5184,7 @@ Command Index
 * Menu:
 
 * access-class ACCESS-LIST:              Basic Config Commands.
-                                                              (line 121)
+                                                              (line 128)
 * access-list NAME deny IPV4-NETWORK:    IP Access List.      (line   8)
 * access-list NAME permit IPV4-NETWORK:  IP Access List.      (line   7)
 * aggregate-address A.B.C.D/M:           Route Aggregation.   (line   7)
@@ -5214,7 +5221,7 @@ Command Index
 * auto-cost refrence-bandwidth <1-4294967>: OSPF router.      (line  53)
 * bandwidth <1-10000000>:                Interface Commands.  (line  31)
 * banner motd default:                   Basic Config Commands.
-                                                              (line 103)
+                                                              (line 110)
 * bgp cluster-id A.B.C.D:                Route Reflector.     (line   7)
 * bgp config-type cisco:                 Multiple instance.   (line  20)
 * bgp config-type zebra:                 Multiple instance.   (line  49)
@@ -5308,9 +5315,9 @@ Command Index
 * enable password PASSWORD:              Basic Config Commands.
                                                               (line  14)
 * exec-timeout MINUTE:                   Basic Config Commands.
-                                                              (line 109)
+                                                              (line 116)
 * exec-timeout MINUTE SECOND:            Basic Config Commands.
-                                                              (line 110)
+                                                              (line 117)
 * flush_timer TIME:                      ripngd Configuration.
                                                               (line  12)
 * hostname HOSTNAME:                     Basic Config Commands.
@@ -5394,30 +5401,30 @@ Command Index
 * ipv6 route NETWORK GATEWAY DISTANCE:   Static Route Commands.
                                                               (line  78)
 * line vty:                              Basic Config Commands.
-                                                              (line 100)
+                                                              (line 107)
 * link-detect:                           Interface Commands.  (line  37)
 * list:                                  Terminal Mode Commands.
                                                               (line  24)
 * log facility FACILITY:                 Basic Config Commands.
-                                                              (line  74)
+                                                              (line  81)
 * log file FILENAME:                     Basic Config Commands.
                                                               (line  41)
 * log file FILENAME LEVEL:               Basic Config Commands.
                                                               (line  42)
 * log monitor:                           Basic Config Commands.
-                                                              (line  61)
+                                                              (line  68)
 * log monitor LEVEL:                     Basic Config Commands.
-                                                              (line  62)
+                                                              (line  69)
 * log record-priority:                   Basic Config Commands.
-                                                              (line  80)
+                                                              (line  87)
 * log stdout:                            Basic Config Commands.
                                                               (line  28)
 * log stdout LEVEL:                      Basic Config Commands.
                                                               (line  29)
 * log syslog:                            Basic Config Commands.
-                                                              (line  52)
+                                                              (line  59)
 * log syslog LEVEL:                      Basic Config Commands.
-                                                              (line  53)
+                                                              (line  60)
 * log trap LEVEL:                        Basic Config Commands.
                                                               (line  17)
 * logmsg LEVEL MESSAGE:                  Terminal Mode Commands.
@@ -5523,7 +5530,7 @@ Command Index
 * no auto-cost refrence-bandwidth:       OSPF router.         (line  54)
 * no bandwidth <1-10000000>:             Interface Commands.  (line  32)
 * no banner motd:                        Basic Config Commands.
-                                                              (line 106)
+                                                              (line 113)
 * no bgp multiple-instance:              Multiple instance.   (line  14)
 * no debug event:                        More Show IP BGP.    (line  39)
 * no debug keepalive:                    More Show IP BGP.    (line  43)
@@ -5556,7 +5563,7 @@ Command Index
 * no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
                                                               (line  42)
 * no exec-timeout:                       Basic Config Commands.
-                                                              (line 117)
+                                                              (line 124)
 * no ip address ADDRESS/PREFIX:          Interface Commands.  (line  15)
 * no ip address ADDRESS/PREFIX secondary: Interface Commands. (line  20)
 * no ip as-path access-list WORD:        AS Path Access List. (line  12)
@@ -5606,17 +5613,17 @@ Command Index
                                                               (line   7)
 * no link-detect:                        Interface Commands.  (line  38)
 * no log facility:                       Basic Config Commands.
-                                                              (line  75)
+                                                              (line  82)
 * no log file:                           Basic Config Commands.
                                                               (line  43)
 * no log monitor:                        Basic Config Commands.
-                                                              (line  63)
+                                                              (line  70)
 * no log record-priority:                Basic Config Commands.
-                                                              (line  81)
+                                                              (line  88)
 * no log stdout:                         Basic Config Commands.
                                                               (line  30)
 * no log syslog:                         Basic Config Commands.
-                                                              (line  54)
+                                                              (line  61)
 * no log trap:                           Basic Config Commands.
                                                               (line  18)
 * no multicast:                          Interface Commands.  (line  28)
@@ -5766,13 +5773,13 @@ Command Index
                                                               (line  24)
 * router-id A.B.C.D:                     OSPF6 router.        (line   9)
 * service advanced-vty:                  Basic Config Commands.
-                                                              (line  93)
+                                                              (line 100)
 * service integrated-vtysh-config:       VTY shell integrated configuration.
                                                               (line   7)
 * service password-encryption:           Basic Config Commands.
-                                                              (line  90)
+                                                              (line  97)
 * service terminal-length <0-512>:       Basic Config Commands.
-                                                              (line  96)
+                                                              (line 103)
 * set as-path prepend AS-PATH:           Using AS Path in Route Map.
                                                               (line   9)
 * set as-path prepend AS_PATH:           Route Map Set Command.
@@ -6020,137 +6027,137 @@ Node: Install the Software22090
 Node: Basic commands23550
 Node: Config Commands24325
 Node: Basic Config Commands25218
-Node: Sample Config File30316
-Node: Terminal Mode Commands31086
-Node: Common Invocation Options32183
-Node: Virtual Terminal Interfaces33590
-Node: VTY Overview34101
-Node: VTY Modes35352
-Node: VTY View Mode35802
-Node: VTY Enable Mode36052
-Node: VTY Other Modes36330
-Node: VTY CLI Commands36506
-Node: CLI Movement Commands36966
-Node: CLI Editing Commands37489
-Node: CLI Advanced Commands38077
-Node: Zebra38843
-Node: Invoking zebra39352
-Node: Interface Commands39931
-Node: Static Route Commands41463
-Node: zebra Terminal Mode Commands44736
-Node: RIP45701
-Node: Starting and Stopping ripd46638
-Node: RIP netmask48051
-Node: RIP Configuration49150
-Node: How to Announce RIP route53415
-Node: Filtering RIP Routes55978
-Node: RIP Metric Manipulation57445
-Node: RIP distance58358
-Node: RIP route-map59173
-Node: RIP Authentication61689
-Node: RIP Timers62796
-Node: Show RIP Information64082
-Node: RIP Debug Commands65455
-Node: RIPng66451
-Node: Invoking ripngd66771
-Node: ripngd Configuration67020
-Node: ripngd Terminal Mode Commands67771
-Node: ripngd Filtering Commands68135
-Node: OSPFv268644
-Node: Configuring ospfd69203
-Node: OSPF router69671
-Node: OSPF area72827
-Node: OSPF interface78009
-Node: Redistribute routes to OSPF81392
-Node: Showing OSPF information83555
-Node: Debugging OSPF84801
-Node: OSPFv385840
-Node: OSPF6 router86160
-Node: OSPF6 area86514
-Node: OSPF6 interface86692
-Node: Redistribute routes to OSPF687569
-Node: Showing OSPF6 information87885
-Node: BGP88705
-Node: Starting BGP89595
-Node: BGP router90172
-Node: BGP distance91416
-Node: BGP decision process91854
-Node: BGP network92124
-Node: BGP route92314
-Node: Route Aggregation92870
-Node: Redistribute to BGP93439
-Node: BGP Peer93966
-Node: Defining Peer94153
-Node: BGP Peer commands94766
-Node: Peer filtering97170
-Node: BGP Peer Group97678
-Node: BGP Address Family97991
-Node: Autonomous System98145
-Node: AS Path Regular Expression98982
-Node: Display BGP Routes by AS Path100229
-Node: AS Path Access List100669
-Node: Using AS Path in Route Map101136
-Node: Private AS Numbers101417
-Node: BGP Communities Attribute101575
-Node: BGP Community Lists104042
-Node: Numbered BGP Community Lists106696
-Node: BGP Community in Route Map108283
-Node: Display BGP Routes by Community110226
-Node: Using BGP Communities Attribute111395
-Node: BGP Extended Communities Attribute114963
-Node: BGP Extended Community Lists116735
-Node: BGP Extended Communities in Route Map118610
-Node: Displaying BGP routes119069
-Node: Show IP BGP119306
-Node: More Show IP BGP120006
-Node: Capability Negotiation121157
-Node: Route Reflector124461
-Node: Route Server124740
-Node: Multiple instance125806
-Node: BGP instance and view127617
-Node: Routing policy128997
-Node: Viewing the view129765
-Node: How to set up a 6-Bone connection130050
-Node: Dump BGP packets and table131422
-Node: Configuring Quagga as a Route Server131969
-Node: Description of the Route Server model132930
-Ref: fig:normal-processing134507
-Ref: fig:full-mesh134657
-Ref: fig:route-server134753
-Ref: filter-delegation135167
-Ref: Route Server tasks136351
-Ref: Route-server path filter process136722
-Ref: fig:rs-processing139036
-Node: Commands for configuring a Route Server139153
-Node: Example of Route Server Configuration142180
-Node: Configuration of the BGP routers without Route Server143101
-Node: Configuration of the BGP routers with Route Server145984
-Node: Configuration of the Route Server itself147285
-Node: Further considerations about Import and Export route-maps152284
-Node: VTY shell155328
-Node: VTY shell username155997
-Node: VTY shell integrated configuration156629
-Node: Filtering158077
-Node: IP Access List158430
-Node: IP Prefix List158816
-Node: ip prefix-list description161835
-Node: ip prefix-list sequential number control162362
-Node: Showing ip prefix-list162904
-Node: Clear counter of ip prefix-list164012
-Node: Route Map164451
-Node: Route Map Command164956
-Node: Route Map Match Command165153
-Node: Route Map Set Command165777
-Node: IPv6 Support166654
-Node: Router Advertisement167226
-Node: Kernel Interface171027
-Node: SNMP Support172984
-Node: Getting and installing an SNMP agent173556
-Node: SMUX configuration174129
-Node: MIB and command reference176265
-Node: Zebra Protocol177652
-Node: Packet Binary Dump Format179566
-Node: Command Index191176
-Node: VTY Key Index247369
+Node: Sample Config File30708
+Node: Terminal Mode Commands31478
+Node: Common Invocation Options32575
+Node: Virtual Terminal Interfaces33982
+Node: VTY Overview34493
+Node: VTY Modes35744
+Node: VTY View Mode36194
+Node: VTY Enable Mode36444
+Node: VTY Other Modes36722
+Node: VTY CLI Commands36898
+Node: CLI Movement Commands37358
+Node: CLI Editing Commands37881
+Node: CLI Advanced Commands38469
+Node: Zebra39235
+Node: Invoking zebra39744
+Node: Interface Commands40323
+Node: Static Route Commands41855
+Node: zebra Terminal Mode Commands45128
+Node: RIP46093
+Node: Starting and Stopping ripd47030
+Node: RIP netmask48443
+Node: RIP Configuration49542
+Node: How to Announce RIP route53807
+Node: Filtering RIP Routes56370
+Node: RIP Metric Manipulation57837
+Node: RIP distance58750
+Node: RIP route-map59565
+Node: RIP Authentication62081
+Node: RIP Timers63188
+Node: Show RIP Information64474
+Node: RIP Debug Commands65847
+Node: RIPng66843
+Node: Invoking ripngd67163
+Node: ripngd Configuration67412
+Node: ripngd Terminal Mode Commands68163
+Node: ripngd Filtering Commands68527
+Node: OSPFv269036
+Node: Configuring ospfd69595
+Node: OSPF router70063
+Node: OSPF area73219
+Node: OSPF interface78401
+Node: Redistribute routes to OSPF81784
+Node: Showing OSPF information83947
+Node: Debugging OSPF85193
+Node: OSPFv386232
+Node: OSPF6 router86552
+Node: OSPF6 area86906
+Node: OSPF6 interface87084
+Node: Redistribute routes to OSPF687961
+Node: Showing OSPF6 information88277
+Node: BGP89097
+Node: Starting BGP89987
+Node: BGP router90564
+Node: BGP distance91808
+Node: BGP decision process92246
+Node: BGP network92516
+Node: BGP route92706
+Node: Route Aggregation93262
+Node: Redistribute to BGP93831
+Node: BGP Peer94358
+Node: Defining Peer94545
+Node: BGP Peer commands95158
+Node: Peer filtering97562
+Node: BGP Peer Group98070
+Node: BGP Address Family98383
+Node: Autonomous System98537
+Node: AS Path Regular Expression99374
+Node: Display BGP Routes by AS Path100621
+Node: AS Path Access List101061
+Node: Using AS Path in Route Map101528
+Node: Private AS Numbers101809
+Node: BGP Communities Attribute101967
+Node: BGP Community Lists104434
+Node: Numbered BGP Community Lists107088
+Node: BGP Community in Route Map108675
+Node: Display BGP Routes by Community110618
+Node: Using BGP Communities Attribute111787
+Node: BGP Extended Communities Attribute115355
+Node: BGP Extended Community Lists117127
+Node: BGP Extended Communities in Route Map119002
+Node: Displaying BGP routes119461
+Node: Show IP BGP119698
+Node: More Show IP BGP120398
+Node: Capability Negotiation121549
+Node: Route Reflector124853
+Node: Route Server125132
+Node: Multiple instance126198
+Node: BGP instance and view128009
+Node: Routing policy129389
+Node: Viewing the view130157
+Node: How to set up a 6-Bone connection130442
+Node: Dump BGP packets and table131814
+Node: Configuring Quagga as a Route Server132361
+Node: Description of the Route Server model133322
+Ref: fig:normal-processing134899
+Ref: fig:full-mesh135049
+Ref: fig:route-server135145
+Ref: filter-delegation135559
+Ref: Route Server tasks136743
+Ref: Route-server path filter process137114
+Ref: fig:rs-processing139428
+Node: Commands for configuring a Route Server139545
+Node: Example of Route Server Configuration142572
+Node: Configuration of the BGP routers without Route Server143493
+Node: Configuration of the BGP routers with Route Server146376
+Node: Configuration of the Route Server itself147677
+Node: Further considerations about Import and Export route-maps152676
+Node: VTY shell155720
+Node: VTY shell username156389
+Node: VTY shell integrated configuration157021
+Node: Filtering158469
+Node: IP Access List158822
+Node: IP Prefix List159208
+Node: ip prefix-list description162227
+Node: ip prefix-list sequential number control162754
+Node: Showing ip prefix-list163296
+Node: Clear counter of ip prefix-list164404
+Node: Route Map164843
+Node: Route Map Command165348
+Node: Route Map Match Command165545
+Node: Route Map Set Command166169
+Node: IPv6 Support167046
+Node: Router Advertisement167618
+Node: Kernel Interface171419
+Node: SNMP Support173376
+Node: Getting and installing an SNMP agent173948
+Node: SMUX configuration174521
+Node: MIB and command reference176657
+Node: Zebra Protocol178044
+Node: Packet Binary Dump Format179958
+Node: Command Index191568
+Node: VTY Key Index247761
 
 End Tag Table