Initial revision

1 files changed, 127 insertions, 0 deletions

diff --git a/doc/ospf6d.8 b/doc/ospf6d.8
new file mode 100644
index 00000000..1882c10e
--- /dev/null
+++ b/doc/ospf6d.8
@@ -0,0 +1,127 @@
+.TH OSPF6D 8 "July 2000" "Zebra Beast - OSPF6D" "Version 0.88"
+
+.SH NAME
+ospf6d \- an OSPF routing engine for use with Zebra and IPv6
+
+.SH SYNOPSIS
+.B ospf6d
+[
+.B \-dhv
+]
+[
+.B \-f config-file
+]
+[
+.B \-i pid-file
+]
+[
+.B \-P port-number
+]
+
+.SH DESCRIPTION
+.B ospf6d 
+is a routing component that works with the 
+.B zebra
+routing engine.
+\fBospf6d\fR. 
+
+
+.SH OPTIONS
+
+.TP
+\fB\-d\fR, \fB\-\-daemon\fR
+Runs in daemon mode, forking and exiting from tty.
+
+.TP
+\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR 
+Specifies the config file to use for startup. If not specified this
+option will likely default to \fB\fI/usr/local/etc/ospf6d.conf\fR.
+ 
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+A brief message.
+
+.TP
+\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR
+When ospf6d starts its process idenifier is written to
+\fB\fIpid-file\fR.  The init system uses the recorded PID to stop or
+restart ospf6d.  The likely default is \fB\fI/var/run/ospf6d.pid\fR.
+
+.TP
+\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR 
+Specify the port that the ospf6d VTY will listen on. This defaults to
+2606, as specified in \fB\fI/etc/services\fR.
+
+.TP
+\fB\-v\fR, \fB\-\-version\fR
+Print the version and exit.
+
+
+.SH COMMANDS
+
+\fB router ospf6 \fR
+\fB router zebra \fR -- (Move routes into kernel table)
+
+\fB network [NETWORK] area [OSPF6-AREA-ID] \fR
+\fB no network [NETWORK] \fR
+
+\fB show ip ospf6 interface \fR
+\fB show ip ospf6 neighbor \fR
+\fB show ip ospf6 database \fR
+\fB show ip ospf6 route \fR
+
+\fB debug ospf6 ism \fR
+\fB debug ospf6 packet \fR
+\fB debug ospf6 nsm \fR
+
+
+
+.SH FILES
+
+.TP
+.BI /usr/local/sbin/ospf6d
+The default location of the 
+.B ospf6d
+binary.
+
+.TP
+.BI /usr/local/etc/ospf6d.conf
+The default location of the 
+.B ospf6d
+config file.
+
+.TP
+.BI $(PWD)/ospf6d.log 
+If the 
+.B ospf6d
+process is config'd to output logs to a file, then you will find this
+file in the directory where you started \fBospf6d\fR.
+
+
+.SH WARNING
+This man page is intended as a quick reference for command line
+options, and for config file commands. The definitive document is the
+Info file \fBzebra\fR.
+
+
+.SH DIAGNOSTICS
+The ospf6d process may log to standard output, to a VTY, to a log
+file, or through syslog to the system logs. \fBospf6d\fR supports many
+debugging options, see the Info file, or the source for details.
+
+
+.SH "SEE ALSO"
+References to other related man pages:
+
+ripd(8), ripngd(8), ospfd(8), bgpd(8), zebra(8), vtysh(1)
+
+
+.SH BUGS
+.B ospf6d
+eats bugs for breakfast. If you have food for the maintainers try 
+.BI <bug-zebra@gnu.org>
+
+
+.SH AUTHOR[S]
+See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors.
+