2005-10-21 Paul Jakma <paul.jakma@sun.com>

	* (general) OSPF fast, sub-second hello and 1s dead-interval
	  support. A warning fix. Millisec support for ospf_timer_dump.
	  Change auto-cost ref-bandwidth to add a comment to write out
	  of config, rather than printing annoying messages to vty on
	  startup.
	* ospf_dump.c: (ospf_timer_dump) Print out milliseconds too.
	  Callers typically specify a length of 9, so most see
	  millisecs unless they specify the additional length.
	* ospf_interface.h: (struct ospf_interface) new interface param,
	  fast_hello.
	* ospf_interface.c: (ospf_if_table_lookup) add brackets,
	  gcc warning fix.
	  (ospf_new_if_params) Initialise fast_hello param.
	  (ospf_free_if_params) Check whether fast_hello is configured.
	  (ospf_if_new_hook) set fast_hello to default.
	* ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to
	  prevent funny side-effects from its if statement when this
	  macro is used conditionally by other macros.
	  (OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds.
	  (OSPF_HELLO_TIMER_ON) new macro to set hello timer according
	  to whether fast_hello is set.
	* ospf_ism.c: Update all setting of the hello timer to use
	  either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The
	  former is used when hello is to be sent immediately.
	* ospf_nsm.c: ditto
	* ospf_packet.c: (ospf_hello) hello-interval is not checked
	  for mismatch if fast_hello is set.
	  (ospf_read) Annoying nit, fix "no ospf_interface" to be debug
	  rather than a warning, as it can be perfectly normal to
	  receive packets when logical subnets are used.
	  (ospf_make_hello) Set hello-interval to 0 if fast-hellos are
	  configured.
	* ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying
	  nit, don't vty_out if this command is given, it gets tired
	  quick.
	  (show_ip_ospf_interface_sub) Print the hello-interval
	  according to whether fast-hello is set or not.
	  Print the extra 5 millisec characters from (ospf_timer_dump)
	  if fast-hello is configured.
	  (ospf_vty_dead_interval_set) new function, common to all
	  forms of dead-interval command, to set dead-interval and
	  fast-hello correctly. If a dead-interval is given, unset
	  fast-hello, else if a hello-multiplier is set, set
          dead-interval to 1 and fast-hello to given multiplier.
	  (ip_ospf_dead_interval_addr_cmd) use
	  ospf_vty_dead_interval_set().
	  (ip_ospf_dead_interval_minimal_addr_cmd) ditto.
	  (no_ip_ospf_dead_interval) Unset fast-hello.
	  (no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval
	  should set it to OSPF_HELLO_INTERVAL_DEFAULT, not
	  OSPF_ROUTER_DEAD_INTERVAL_DEFAULT.
	  (config_write_interface) Write out fast-hello.
	  (ospf_config_write) Write a comment about
	  "auto-cost reference-bandwidth" having to be equal on all
	  routers. Hopefully just as noticeable as old practice of
	  writing to vty, but less annoying.
	  (ospf_vty_if_init) install the two new dead-interval
	  commands.
	* ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL
	  and OSPF_FAST_HELLO_DEFAULT.

1 files changed, 20 insertions, 12 deletions

diff --git a/ospfd/ospf_dump.c b/ospfd/ospf_dump.c
index ac742692..829c00f7 100644
--- a/ospfd/ospf_dump.c
+++ b/ospfd/ospf_dump.c
@@ -232,31 +232,39 @@ ospf_nbr_state_message (struct ospf_neighbor *nbr, char *buf, size_t size)
 const char *
 ospf_timer_dump (struct thread *t, char *buf, size_t size)
 {
-  struct timeval now;
-  unsigned long h, m, s;
+  struct timeval now, result;
+  unsigned long h, m, s, ms;
 
   if (!t)
     return "inactive";
 
-  h = m = s = 0;
+  h = m = s = ms = 0;
   memset (buf, 0, size);
 
   gettimeofday (&now, NULL);
-
-  s = t->u.sands.tv_sec - now.tv_sec;
-  if (s >= 3600)
+  
+  timersub (&t->u.sands, &now, &result);
+  
+  ms = result.tv_usec / 1000;
+  
+  if (ms >= 1000)
+    {
+      result.tv_sec = ms / 1000;
+      ms =- result.tv_sec * 1000;
+    }
+  if (result.tv_sec >= 3600)
     {
-      h = s / 3600;
-      s -= h * 3600;
+      h = result.tv_sec / 3600;
+      result.tv_sec -= h * 3600;
     }
 
-  if (s >= 60)
+  if (result.tv_sec >= 60)
     {
-      m = s / 60;
-      s -= m * 60;
+      m = result.tv_sec / 60;
+      result.tv_sec -= m * 60;
     }
 
-  snprintf (buf, size, "%02ld:%02ld:%02ld", h, m, s);
+  snprintf (buf, size, "%02ld:%02ld:%02ld.%03ld", h, m, result.tv_sec, ms);
 
   return buf;
 }