diff options
| -rw-r--r-- | ports/redhat/bgpd.init | 60 | ||||
| -rw-r--r-- | ports/redhat/ospf6d.init | 60 | ||||
| -rw-r--r-- | ports/redhat/ospfd.init | 61 | ||||
| -rw-r--r-- | ports/redhat/ripd.init | 60 | ||||
| -rw-r--r-- | ports/redhat/ripngd.init | 60 | ||||
| -rw-r--r-- | ports/redhat/zebra.init | 61 | ||||
| -rw-r--r-- | ports/redhat/zebra.logrotate | 59 | ||||
| -rw-r--r-- | ports/redhat/zebra.pam | 10 | ||||
| -rw-r--r-- | ports/redhat/zebra.spec | 275 |
9 files changed, 706 insertions, 0 deletions
diff --git a/ports/redhat/bgpd.init b/ports/redhat/bgpd.init new file mode 100644 index 00000000..d7c2e3fe --- /dev/null +++ b/ports/redhat/bgpd.init @@ -0,0 +1,60 @@ +#!/bin/bash +# +# chkconfig: - 16 84 +# description: A BGPv4, BGPv4+, BGPv4- routing engine for use with Zebra +# +# processname: bgpd +# config: /etc/zebra/bgpd.conf + +# source function library +. /etc/rc.d/init.d/functions + +# Get network config +. /etc/sysconfig/network + +# Check that networking is up. +[ "${NETWORKING}" = "no" ] && exit 0 + +# The process must be configured first. +[ -f /etc/zebra/bgpd.conf ] || exit 0 + +RETVAL=0 +prog="bgpd" + +case "$1" in + start) + echo -n $"Starting $prog: " + daemon /usr/sbin/bgpd -d + RETVAL=$? + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/bgpd + echo + ;; + stop) + echo -n $"Shutting down $prog: " + killproc bgpd + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/bgpd + echo + ;; + restart|reload) + $0 stop + $0 start + RETVAL=$? + ;; + condrestart) + if [ -f /var/lock/subsys/bgpd ]; then + $0 stop + $0 start + fi + RETVAL=$? + ;; + status) + status bgpd + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|condrestart|status}" + exit 1 +esac + +exit $RETVAL diff --git a/ports/redhat/ospf6d.init b/ports/redhat/ospf6d.init new file mode 100644 index 00000000..9a6e8c51 --- /dev/null +++ b/ports/redhat/ospf6d.init @@ -0,0 +1,60 @@ +#!/bin/bash +# +# chkconfig: - 16 84 +# description: An OSPF routing engine for use with Zebra and IPv6 +# +# processname: ospf6d +# config: /etc/zebra/ospf6d.conf + +# source function library +. /etc/rc.d/init.d/functions + +# Get network config +. /etc/sysconfig/network + +# Check that networking is up. +[ "${NETWORKING_IPV6}" = "no" ] && exit 0 + +# The process must be configured first. +[ -f /etc/zebra/ospf6d.conf ] || exit 0 + +RETVAL=0 +prog="ospf6d" + +case "$1" in + start) + echo -n $"Starting $prog: " + daemon /usr/sbin/ospf6d -d + RETVAL=$? + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/ospf6d + echo + ;; + stop) + echo -n $"Shutting down $prog: " + killproc ospf6d + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/ospf6d + echo + ;; + restart|reload) + $0 stop + $0 start + RETVAL=$? + ;; + condrestart) + if [ -f /var/lock/subsys/ospf6d ]; then + $0 stop + $0 start + fi + RETVAL=$? + ;; + status) + status ospf6d + RETVAL=$? + ;; + *) + echo $"Usage: $prog {start|stop|restart|reload|condrestart|status}" + exit 1 +esac + +exit $RETVAL diff --git a/ports/redhat/ospfd.init b/ports/redhat/ospfd.init new file mode 100644 index 00000000..4aab1388 --- /dev/null +++ b/ports/redhat/ospfd.init @@ -0,0 +1,61 @@ +#!/bin/bash +# +# chkconfig: - 16 84 +# description: An OSPF v2 routing engine for use with Zebra +# +# processname: ospfd +# config: /etc/zebra/ospfd.conf + +# source function library +. /etc/rc.d/init.d/functions + +# Get network config +. /etc/sysconfig/network + +# Check that networking is up. +[ "${NETWORKING}" = "no" ] && exit 0 + +# The process must be configured first. +[ -f /etc/zebra/ospfd.conf ] || exit 0 + +RETVAL=0 + +prog="ospfd" + +case "$1" in + start) + echo -n $"Starting $prog: " + daemon /usr/sbin/ospfd -d + RETVAL=$? + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/ospfd + echo + ;; + stop) + echo -n $"Shutting down $prog: " + killproc ospfd + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/ospfd + echo + ;; + restart|reload) + $0 stop + $0 start + RETVAL=$? + ;; + condrestart) + if [ -f /var/lock/subsys/ospfd ]; then + $0 stop + $0 start + fi + RETVAL=$? + ;; + status) + status ospfd + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|condrestart|status}" + exit 1 +esac + +exit $RETVAL diff --git a/ports/redhat/ripd.init b/ports/redhat/ripd.init new file mode 100644 index 00000000..2ac67337 --- /dev/null +++ b/ports/redhat/ripd.init @@ -0,0 +1,60 @@ +#!/bin/bash +# +# chkconfig: - 16 84 +# description: A RIP routing engine for use with Zebra +# +# processname: ripd +# config: /etc/zebra/ripd.conf + +# source function library +. /etc/rc.d/init.d/functions + +# Get network config +. /etc/sysconfig/network + +# Check that networking is up. +[ "${NETWORKING}" = "no" ] && exit 0 + +# The process must be configured first. +[ -f /etc/zebra/ripd.conf ] || exit 0 + +RETVAL=0 +prog="ripd" + +case "$1" in + start) + echo -n $"Starting $prog: " + daemon /usr/sbin/ripd -d + RETVAL=$? + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/ripd + echo + ;; + stop) + echo -n $"Shutting down $prog: " + killproc ripd + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/ripd + echo + ;; + restart|reload) + $0 stop + $0 start + RETVAL=$? + ;; + condrestart) + if [ -f /var/lock/subsys/ripd ]; then + $0 stop + $0 start + fi + RETVAL=$? + ;; + status) + status ripd + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|condrestart|status}" + exit 1 +esac + +exit $RETVAL diff --git a/ports/redhat/ripngd.init b/ports/redhat/ripngd.init new file mode 100644 index 00000000..be54a013 --- /dev/null +++ b/ports/redhat/ripngd.init @@ -0,0 +1,60 @@ +#!/bin/bash +# +# chkconfig: - 16 84 +# description: A RIP routing engine for use with Zebra and IPv6 +# +# processname: ripngd +# config: /etc/zebra/ripngd.conf + +# source function library +. /etc/rc.d/init.d/functions + +# Get network config +. /etc/sysconfig/network + +# Check that networking is up. +[ "${NETWORKING_IPV6}" = "no" ] && exit 0 + +# The process must be configured first. +[ -f /etc/zebra/ripngd.conf ] || exit 0 + +RETVAL=0 +prog="ripngd" + +case "$1" in + start) + echo -n $"Starting $prog: " + daemon /usr/sbin/ripngd -d + RETVAL=$? + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/ripngd + echo + ;; + stop) + echo -n $"Shutting down $prog: " + killproc ripngd + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/ripngd + echo + ;; + restart|reload) + $0 stop + $0 start + RETVAL=$? + ;; + condrestart) + if [ -f /var/lock/subsys/ripngd ]; then + $0 stop + $0 start + fi + RETVAL=$? + ;; + status) + status ripngd + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|condrestart|status}" + exit 1 +esac + +exit $RETVAL diff --git a/ports/redhat/zebra.init b/ports/redhat/zebra.init new file mode 100644 index 00000000..5a450e21 --- /dev/null +++ b/ports/redhat/zebra.init @@ -0,0 +1,61 @@ +#!/bin/bash +# +# chkconfig: - 15 85 +# description: GNU Zebra routing manager +# +# processname: zebra +# config: /etc/zebra/zebra.conf + +# source function library +. /etc/rc.d/init.d/functions + +# Check that networking is up. +[ "${NETWORKING}" = "no" ] && exit 0 + +# The process must be configured first. +[ -f /etc/zebra/zebra.conf ] || exit 0 + +RETVAL=0 + +prog="zebra" + +case "$1" in + start) + echo -n $"Starting $prog: " + + /sbin/ip route flush proto zebra + + daemon /usr/sbin/zebra -d + RETVAL=$? + [ $RETVAL -eq 0 ] && touch /var/lock/subsys/zebra + echo + ;; + stop) + echo -n $"Shutting down $prog: " + killproc zebra + RETVAL=$? + [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/zebra + echo + ;; + restart|reload) + $0 stop + $0 start + RETVAL=$? + ;; + condrestart) + if [ -f /var/lock/subsys/zebra ]; then + $0 stop + $0 start + fi + RETVAL=$? + ;; + status) + status zebra + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|restart|reload|condrestart|status}" + exit 1 +esac + +exit $RETVAL diff --git a/ports/redhat/zebra.logrotate b/ports/redhat/zebra.logrotate new file mode 100644 index 00000000..2e352ff6 --- /dev/null +++ b/ports/redhat/zebra.logrotate @@ -0,0 +1,59 @@ +/var/log/zebra/zebra.log { + notifempty + missingok + nocompress + weekly + postrotate + /usr/sbin/killall -USR1 zebra + endscript +} + +/var/log/zebra/bgpd.log { + notifempty + missingok + nocompress + weekly + postrotate + /usr/sbin/killall -USR1 bgpd + endscript +} + +/var/log/zebra/ospfd.log { + notifempty + missingok + nocompress + weekly + postrotate + /usr/sbin/killall -USR1 ospfd + endscript +} + +/var/log/zebra/ospf6d.log { + notifempty + missingok + nocompress + weekly + postrotate + /usr/sbin/killall -USR1 ospf6d + endscript +} + +/var/log/zebra/ripd.log { + notifempty + missingok + nocompress + weekly + postrotate + /usr/sbin/killall -USR1 ripd + endscript +} + +/var/log/zebra/ripngd.log { + notifempty + missingok + nocompress + weekly + postrotate + /usr/sbin/killall -USR1 ripngd + endscript +} diff --git a/ports/redhat/zebra.pam b/ports/redhat/zebra.pam new file mode 100644 index 00000000..fb17f59e --- /dev/null +++ b/ports/redhat/zebra.pam @@ -0,0 +1,10 @@ +#%PAM-1.0 +# +# Only allow root (and possibly wheel) to use this because enable access +# is unrestricted. + +auth sufficient /lib/security/pam_rootok.so +# Uncomment the following line to implicitly trust users in the "wheel" group. +#auth sufficient /lib/security/pam_wheel.so trust use_uid +# Uncomment the following line to require a user to be in the "wheel" group. +#auth required /lib/security/pam_wheel.so use_uid diff --git a/ports/redhat/zebra.spec b/ports/redhat/zebra.spec new file mode 100644 index 00000000..68bf7650 --- /dev/null +++ b/ports/redhat/zebra.spec @@ -0,0 +1,275 @@ +%define with_snmp 0 +%define with_vtysh 1 +%define with_ospf_te 1 +%define with_nssa 1 +%define with_opaque_lsa 1 +%define with_tcp_zebra 0 +%define with_vtysh 1 +%define with_pam 1 +%define with_ipv6 1 +%define with_multipath 32 +%define _sysconfdir /etc/zebra + +Summary: Routing daemon +Name: zebra +Version: 0.93b +Release: 2002111101 +License: GPL +Group: System Environment/Daemons +Source0: ftp://ftp.zebra.org/pub/zebra/%{name}-%{version}.tar.gz +Source1: zebra.init +Source2: bgpd.init +Source3: ospf6d.init +Source4: ospfd.init +Source5: ripd.init +Source6: ripngd.init +Source8: zebra.pam +Source9: zebra.logrotate +Source10: zebra.mpls-docs.tar.gz +Patch0: zebra-bgpd-hash.patch +Patch1: zebra-ptp.patch +Patch2: zebra-linkstate.patch +Patch3: zebra-ospfd-ptmp.patch +Patch4: zebra-ospfd-misc.patch +Patch5: zebra-ospfd-olsa.patch +Patch7: zebra-vtysh-write-config.patch +Patch8: zebra-ospfd-md5auth-seqnum.patch +Patch9: zebra-ospfd-oi_write_q.patch +Patch10: zebra-ripv1-netmask.patch +Patch11: zebra-ospfd-md5-buffer-fix.patch +Patch12: zebra-multi.patch +URL: http://www.zebra.org/ +%if %with_snmp +BuildRequires: ucd-snmp-devel +Prereq: ucd-snmp +%endif +BuildRequires: texinfo tetex autoconf readline-devel ncurses-devel openssl-devel pam-devel +# Initscripts > 5.60 is required for IPv6 support +Prereq: openssl ncurses readline initscripts pam +Prereq: /sbin/install-info +Provides: routingdaemon +BuildRoot: %{_tmppath}/%{name}-%{version}-root +Obsoletes: bird gated mrt + +%description +GNU Zebra is a free software that manages TCP/IP based routing +protocol. It takes multi-server and multi-thread approach to resolve +the current complexity of the Internet. + +GNU Zebra supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, and RIPng. + +GNU Zebra is intended to be used as a Route Server and a Route +Reflector. It is not a toolkit, it provides full routing power under +a new architecture. GNU Zebra is unique in design in that it has a +process for each protocol. + +%prep +%setup -q +%patch0 -p1 -b .bgphash +%patch1 -p0 -b .ptp +%patch2 -p1 -b .linkstate +%patch3 -p1 -b .ospf-ptmp +%patch4 -p1 -b .ospf-misc +%patch5 -p1 -b .ospf-olsa +%patch7 -p1 -b .vtysh-write +%patch8 -p2 -b .ospf-md5auth-seqnum +%patch9 -p0 -b .ospfd-oi_write_q +%patch10 -p0 -b .ripd-netmask +%patch11 -p0 -b .ospfd-md5-buffer +%patch12 -p0 -b .zebra-multi +%{__tar} -zxf %{SOURCE10} + +%build +%configure \ + --with-cflags="-O2" \ + --enable-netlink \ +%if %with_ipv6 + --enable-ipv6 \ +%endif +%if %with_snmp + --enable-snmp \ +%endif +%if %with_multipath + --enable-multipath=%with_multipath \ +%endif +%if %with_tcp_zebra + --enable-tcp-zebra \ +%endif +%if %with_nssa + --enable-nssa \ +%endif +%if %with_opaque_lsa + --enable-opaque-lsa \ +%endif +%if %with_ospf_te + --enable-ospf-te \ +%endif +%if %with_vtysh + --enable-vtysh \ +%endif +%if %with_pam + --with-libpam +%endif + +pushd vtysh +make %{?_smp_mflags} rebuild +popd + +make %{?_smp_mflags} MAKEINFO="makeinfo --no-split" + +pushd doc +texi2html zebra.texi +popd + +%install +rm -rf $RPM_BUILD_ROOT + +install -d $RPM_BUILD_ROOT/etc/{rc.d/init.d,sysconfig,logrotate.d,pam.d} \ + $RPM_BUILD_ROOT/var/log/zebra $RPM_BUILD_ROOT%{_infodir} + +make install \ + DESTDIR=$RPM_BUILD_ROOT + +install %{SOURCE1} $RPM_BUILD_ROOT/etc/rc.d/init.d/zebra +install %{SOURCE2} $RPM_BUILD_ROOT/etc/rc.d/init.d/bgpd +install %{SOURCE3} $RPM_BUILD_ROOT/etc/rc.d/init.d/ospf6d +install %{SOURCE4} $RPM_BUILD_ROOT/etc/rc.d/init.d/ospfd +install %{SOURCE5} $RPM_BUILD_ROOT/etc/rc.d/init.d/ripd +install %{SOURCE6} $RPM_BUILD_ROOT/etc/rc.d/init.d/ripngd +install -m644 %{SOURCE8} $RPM_BUILD_ROOT/etc/pam.d/zebra +install -m644 %{SOURCE9} $RPM_BUILD_ROOT/etc/logrotate.d/zebra + + +%post +# zebra_spec_add_service <sercice name> <port/proto> <comment> +# e.g. zebra_spec_add_service zebrasrv 2600/tcp "zebra service" + +zebra_spec_add_service () +{ + # Add port /etc/services entry if it isn't already there + if [ -f /etc/services ] && ! grep -q "^$1[^a-zA-Z0-9]" /etc/services ; then + echo "$1 $2 # $3" >> /etc/services + fi +} + +zebra_spec_add_service zebrasrv 2600/tcp "zebra service" +zebra_spec_add_service zebra 2601/tcp "zebra vty" +zebra_spec_add_service ripd 2602/tcp "RIPd vty" +zebra_spec_add_service ripngd 2603/tcp "RIPngd vty" +zebra_spec_add_service ospfd 2604/tcp "OSPFd vty" +zebra_spec_add_service bgpd 2605/tcp "BGPd vty" +zebra_spec_add_service ospf6d 2606/tcp "OSPF6d vty" + +/sbin/chkconfig --add zebra +/sbin/chkconfig --add ripd +/sbin/chkconfig --add ripngd +/sbin/chkconfig --add ospfd +/sbin/chkconfig --add ospf6d +/sbin/chkconfig --add bgpd + +/sbin/install-info %{_infodir}/zebra.info.gz %{_infodir}/dir + +# Create dummy files if they don't exist so basic functions can be used. +if [ ! -e %{_sysconfdir}/zebra.conf ]; then + echo "hostname `hostname`" > %{_sysconfdir}/zebra.conf + chmod 640 %{_sysconfdir}/zebra.conf +fi +if [ ! -e %{_sysconfdir}/vtysh.conf ]; then + touch %{_sysconfdir}/vtysh.conf + chmod 640 %{_sysconfdir}/vtysh.conf +fi + +%postun +if [ "$1" -ge "1" ]; then + /etc/rc.d/init.d/zebra condrestart >/dev/null 2>&1 + /etc/rc.d/init.d/ripd condrestart >/dev/null 2>&1 + /etc/rc.d/init.d/ripngd condrestart >/dev/null 2>&1 + /etc/rc.d/init.d/ospfd condrestart >/dev/null 2>&1 + /etc/rc.d/init.d/ospf6d condrestart >/dev/null 2>&1 + /etc/rc.d/init.d/bgpd condrestart >/dev/null 2>&1 +fi +/sbin/install-info --delete %{_infodir}/zebra.info.gz %{_infodir}/dir + +%preun +if [ "$1" = "0" ]; then + /sbin/chkconfig --del zebra + /sbin/chkconfig --del ripd + /sbin/chkconfig --del ripngd + /sbin/chkconfig --del ospfd + /sbin/chkconfig --del ospf6d + /sbin/chkconfig --del bgpd +fi + +%clean +#rm -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) +%doc */*.sample* doc/zebra.html tools AUTHORS COPYING +%doc ChangeLog INSTALL NEWS README REPORTING-BUGS SERVICES TODO +%dir %attr(750,root,root) %{_sysconfdir} +%dir %attr(750,root,root) /var/log/zebra +%dir %attr(755,root,root) /usr/share/info +%{_infodir}/*info* +%{_mandir}/man*/* +%{_sbindir}/* +%{_bindir}/* +%config /etc/zebra/* +%config /etc/rc.d/init.d/* +%config(noreplace) /etc/pam.d/zebra +%config(noreplace) %attr(640,root,root) /etc/logrotate.d/* + +%changelog +* Mon Nov 11 2002 Paul Jakma <paulj@alphyra.ie> +- update to latest CVS +- add Greg Troxel's md5 buffer copy/dup fix +- add RIPv1 fix +- add Frank's multicast flag fix + +* Wed Oct 09 2002 Paul Jakma <paulj@alphyra.ie> +- update to latest CVS +- timestamped crypt_seqnum patch +- oi->on_write_q fix + +* Mon Sep 30 2002 Paul Jakma <paulj@alphyra.ie> +- update to latest CVS +- add vtysh 'write-config (integrated|daemon)' patch +- always 'make rebuild' in vtysh/ to catch new commands + +* Fri Sep 13 2002 Paul Jakma <paulj@alphyra.ie> +- update to 0.93b + +* Wed Sep 11 2002 Paul Jakma <paulj@alphyra.ie> +- update to latest CVS +- add "/sbin/ip route flush proto zebra" to zebra RH init on startup + +* Sat Aug 24 2002 Paul Jakma <paulj@alphyra.ie> +- update to current CVS +- add OSPF point to multipoint patch +- add OSPF bugfixes +- add BGP hash optimisation patch + +* Fri Jun 14 2002 Paul Jakma <paulj@alphyra.ie> +- update to 0.93-pre1 / CVS +- add link state detection support +- add generic PtP and RFC3021 support +- various bug fixes + +* Thu Aug 09 2001 Elliot Lee <sopwith@redhat.com> 0.91a-6 +- Fix bug #51336 + +* Wed Aug 1 2001 Trond Eivind Glomsrød <teg@redhat.com> 0.91a-5 +- Use generic initscript strings instead of initscript specific + ( "Starting foo: " -> "Starting $prog:" ) + +* Fri Jul 27 2001 Elliot Lee <sopwith@redhat.com> 0.91a-4 +- Bump the release when rebuilding into the dist. + +* Tue Feb 6 2001 Tim Powers <timp@redhat.com> +- built for Powertools + +* Sun Feb 4 2001 Pekka Savola <pekkas@netcore.fi> +- Hacked up from PLD Linux 0.90-1, Mandrake 0.90-1mdk and one from zebra.org. +- Update to 0.91a +- Very heavy modifications to init.d/*, .spec, pam, i18n, logrotate, etc. +- Should be quite Red Hat'isque now. |