diff options
| -rw-r--r-- | doc/ChangeLog | 7 | ||||
| -rw-r--r-- | doc/bgpd.8 | 153 | ||||
| -rw-r--r-- | doc/isisd.8 | 106 | ||||
| -rw-r--r-- | doc/ospf6d.8 | 122 | ||||
| -rw-r--r-- | doc/ospfd.8 | 117 | ||||
| -rw-r--r-- | doc/ripd.8 | 210 | ||||
| -rw-r--r-- | doc/ripngd.8 | 128 | ||||
| -rw-r--r-- | doc/vtysh.1 | 103 | ||||
| -rw-r--r-- | doc/zebra.8 | 125 |
9 files changed, 416 insertions, 655 deletions
diff --git a/doc/ChangeLog b/doc/ChangeLog index 9585316c..b9326c01 100644 --- a/doc/ChangeLog +++ b/doc/ChangeLog @@ -1,3 +1,10 @@ +2004-08-10 Hasso Tepper <hasso at quagga.net> + + * Updated man pages. + * Removed vty commands section from all man pages. This inf belongs to + Info pages. + * Added isisd man page. + 2004-07-31 Christian Hammers <ch@lathspell.de> * snmp.texi: update (completely rewritten almost) @@ -1,186 +1,119 @@ -.TH BGPD 8 "July 2000" "Zebra Beast - BGPD" "Version 0.88" - +.TH BGPD 8 "10 August 2004" "Quagga BGPD daemon" "Version 0.96.5" .SH NAME -bgpd \- a BGPv4, BGPv4+, BGPv4- routing engine for use with Zebra +bgpd \- a BGPv4, BGPv4+, BGPv4- routing engine for use with Quagga routing +software .SH SYNOPSIS .B bgpd [ .B \-dhrv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-p +.I bgp-port-number +] [ +.B \--bgp_port= +.I port-number +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user ] -[ -.B \-f config-file -] -[ -.B \-i pid-file -] -[ -.B \-p bgp-port-number -] -[ -.B \--bgp_port=port-number -] -[ -.B \-P vty-port-number -] -[ -.B \-A vty-address -] -[ -.B \-u user -] - - .SH DESCRIPTION .B bgpd is a routing component that works with the -.B zebra +.B Quagga routing engine. - - .SH OPTIONS - +Options available for the +.B bgpd +command: .TP \fB\-d\fR, \fB\-\-daemon\fR Runs in daemon mode, forking and exiting from tty. - .TP \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/bgpd.conf\fR. - .TP \fB\-h\fR, \fB\-\-help\fR A brief message. - .TP \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR When bgpd starts its process idenifier is written to \fB\fIpid-file\fR. The init system uses the recorded PID to stop or restart bgpd. The likely default is \fB\fI/var/run/bgpd.pid\fR. - .TP \fB\-p\fR, \fB\-\-bgp_port=\fR\fIport\fR Set the port that bgpd will listen to for bgp data. - .TP \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR Specify the port that the bgpd VTY will listen on. This defaults to 2605, as specified in \fI/etc/services\fR. - .TP \fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR Specify the address that the bgpd VTY will listen on. Default is all intrefaces. - .TP \fB\-u\fR, \fB\-\-user \fR\fIuser\fR Specify the user and group to run as. User and group have to have same name at the moment. Default is \fIquagga\fR. - .TP \fB\-r\fR, \fB\-\-retain\fR When the program terminates, retain routes added by \fBbgpd\fR. - .TP \fB\-v\fR, \fB\-\-version\fR Print the version and exit. - - -.SH COMMANDS - -\fB router zebra \fR -- (Move routes into kernel table) -\fB router bgp [AS-NUMBER] \fR - -\fB bgp router-id [BGP-ROUTER-ID] \fR - -\fB network [NETWORK] area [BGP-AREA-ID] \fR -\fB no network [NETWORK] \fR - -\fB aggregate-address [NETWORK] \fR - -\fB neighbor [PEER-IP-ADDRESS] remote-as [REMOTE-AS] \fR -\fB neighbor [PEER-IP-ADDRESS] version [ 4 | 4+ | 4- ] \fR - -\fB neighbor [PEER-IP-ADDRESS] description \fR -\fB no neighbor [PEER-IP-ADDRESS] description \fR - -\fB neighbor [PEER-IP-ADDRESS] route-map [in | out] \fR -\fB neighbor [PEER-IP-ADDRESS] distribute-list [in | out] \fR -\fB neighbor [PEER-IP-ADDRESS] next-hop-self \fR -\fB neighbor [PEER-IP-ADDRESS] weight [WEIGHT] \fR -\fB neighbor [PEER-IP-ADDRESS] default-originate \fR -\fB neighbor [PEER-IP-ADDRESS] ebgp-multihop \fR - -\fB neighbor [PEER-IP-ADDRESS] shutdown \fR -\fB no neighbor [PEER-IP-ADDRESS] shutdown \fR - -\fB clear ip bgp [PEER-IP-ADDRESS] \fR - -\fB show ip bgp [NETWORK] \fR -\fB show ip bgp reg-exp [AS-REGEXP] \fR -\fB show ip bgp summary \fR -\fB show ip bgp neighbor [PEER-IP-ADDRESS] \fR -\fB show ip bgp route \fR - -\fB show debug \fR - -\fB debug bgp \fR -\fB debug event \fR -\fB debug update \fR -\fB debug keepalive \fR - -\fB no debug event \fR -\fB no debug update \fR -\fB no debug keepalive \fR - - .SH FILES - .TP .BI /usr/local/sbin/bgpd The default location of the .B bgpd binary. - .TP .BI /usr/local/etc/bgpd.conf The default location of the .B bgpd config file. - .TP .BI $(PWD)/bgpd.log If the .B bgpd process is config'd to output logs to a file, then you will find this file in the directory where you started \fBbgpd\fR. - - .SH WARNING -This man page is intended as a quick reference for command line -options, and for config file commands. The definitive document is the -Info file \fBzebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH DIAGNOSTICS The bgpd process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. \fBbgpd\fR supports many debugging options, see the Info file, or the source for details. - - .SH "SEE ALSO" -References to other related man pages: - -ripd(8), ripngd(8), ospfd(8), ospf6d(8), zebra(8), vtysh(1) - - +.BR ripd (8), +.BR ripngd (8), +.BR ospfd (8), +.BR ospf6d (8), +.BR isisd (8), +.BR zebra (8), +.BR vtysh (1) .SH BUGS .B bgpd eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. diff --git a/doc/isisd.8 b/doc/isisd.8 new file mode 100644 index 00000000..9e33f7c9 --- /dev/null +++ b/doc/isisd.8 @@ -0,0 +1,106 @@ +.TH IS-IS 8 "10 August 2004" "Quagga IS-IS daemon" "Version 0.96.5" +.SH NAME +isisd \- an IS-IS routing engine for use with Quagga routing software. +.SH SYNOPSIS +.B isisd +[ +.B \-dhv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user +] +.SH DESCRIPTION +.B isisd +is a routing component that works with the +.B Quagga +routing engine. +.SH OPTIONS +Options available for the +.B isisd +command: +.TP +\fB\-d\fR, \fB\-\-daemon\fR +Runs in daemon mode, forking and exiting from tty. +.TP +\fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR +Specifies the config file to use for startup. If not specified this +option will likely default to \fB\fI/usr/local/etc/isisd.conf\fR. +.TP +\fB\-h\fR, \fB\-\-help\fR +A brief message. +.TP +\fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR +When isisd starts its process idenifier is written to +\fB\fIpid-file\fR. The init system uses the recorded PID to stop or +restart isisd. The likely default is \fB\fI/var/run/isisd.pid\fR. +.TP +\fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR +Specify the port that the isisd VTY will listen on. This defaults to +2608, as specified in \fB\fI/etc/services\fR. +.TP +\fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR +Specify the address that the isisd VTY will listen on. Default is all +intrefaces. +.TP +\fB\-u\fR, \fB\-\-user \fR\fIuser\fR +Specify the user and group to run as. User and group have to have same +name at the moment. Default is \fIquagga\fR. +.TP +\fB\-v\fR, \fB\-\-version\fR +Print the version and exit. +.SH FILES +.TP +.BI /usr/local/sbin/isisd +The default location of the +.B isisd +binary. +.TP +.BI /usr/local/etc/isisd.conf +The default location of the +.B isisd +config file. +.TP +.BI $(PWD)/isisd.log +If the +.B isisd +process is config'd to output logs to a file, then you will find this +file in the directory where you started \fBisisd\fR. +.SH WARNING +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. +.SH DIAGNOSTICS +The isisd process may log to standard output, to a VTY, to a log +file, or through syslog to the system logs. \fBisisd\fR supports many +debugging options, see the Info file, or the source for details. +.SH "SEE ALSO" +.BR bgpd (8), +.BR ripd (8), +.BR ripngd (8), +.BR ospfd (8), +.BR ospf6d (8), +.BR zebra (8), +.BR vtysh (1) +.SH BUGS +\fBisisd\fR is ALPHA quality at the moment and hasn't any way ready for +production use. + +.B isisd +eats bugs for breakfast. If you have food for the maintainers try +.BI http://bugzilla.quagga.net +.SH AUTHORS +See +.BI http://isisd.sourceforge.net +or the Info file for an accurate list of authors. + diff --git a/doc/ospf6d.8 b/doc/ospf6d.8 index af3d794e..275844b8 100644 --- a/doc/ospf6d.8 +++ b/doc/ospf6d.8 @@ -1,144 +1,106 @@ -.TH OSPF6D 8 "July 2000" "Zebra Beast - OSPF6D" "Version 0.88" - +.TH OSPF6D 8 "10 August 2004" "Quagga OSPFv3 daemon" "Version 0.96.5" .SH NAME -ospf6d \- an OSPF routing engine for use with Zebra and IPv6 - +ospf6d \- an OSPFv3 routing engine for use with Quagga routing software. .SH SYNOPSIS .B ospf6d [ .B \-dhv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user ] -[ -.B \-f config-file -] -[ -.B \-i pid-file -] -[ -.B \-P port-number -] -[ -.B \-A vty-address -] -[ -.B \-u user -] - - - .SH DESCRIPTION -.B ospf6d -is a routing component that works with the -.B zebra +.B ospf6d +is a routing component that works with the +.B Quagga routing engine. -\fBospf6d\fR. - - .SH OPTIONS - +Options available for the +.B ospf6d +command: +.SH OPTIONS .TP \fB\-d\fR, \fB\-\-daemon\fR Runs in daemon mode, forking and exiting from tty. - .TP \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/ospf6d.conf\fR. - .TP \fB\-h\fR, \fB\-\-help\fR A brief message. - .TP \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR When ospf6d starts its process idenifier is written to \fB\fIpid-file\fR. The init system uses the recorded PID to stop or restart ospf6d. The likely default is \fB\fI/var/run/ospf6d.pid\fR. - .TP \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR Specify the port that the ospf6d VTY will listen on. This defaults to 2606, as specified in \fB\fI/etc/services\fR. - .TP \fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR Specify the address that the ospf6d VTY will listen on. Default is all intrefaces. - .TP \fB\-u\fR, \fB\-\-user \fR\fIuser\fR -Specify the user ... Default is \fIquagga\fR. - +Specify the user and group to run as. User and group have to have same +name at the moment. Default is \fIquagga\fR. .TP \fB\-v\fR, \fB\-\-version\fR Print the version and exit. - - -.SH COMMANDS - -\fB router ospf6 \fR -\fB router zebra \fR -- (Move routes into kernel table) - -\fB network [NETWORK] area [OSPF6-AREA-ID] \fR -\fB no network [NETWORK] \fR - -\fB show ip ospf6 interface \fR -\fB show ip ospf6 neighbor \fR -\fB show ip ospf6 database \fR -\fB show ip ospf6 route \fR - -\fB debug ospf6 ism \fR -\fB debug ospf6 packet \fR -\fB debug ospf6 nsm \fR - - - .SH FILES - .TP .BI /usr/local/sbin/ospf6d The default location of the .B ospf6d binary. - .TP .BI /usr/local/etc/ospf6d.conf The default location of the .B ospf6d config file. - .TP .BI $(PWD)/ospf6d.log If the .B ospf6d process is config'd to output logs to a file, then you will find this file in the directory where you started \fBospf6d\fR. - - .SH WARNING -This man page is intended as a quick reference for command line -options, and for config file commands. The definitive document is the -Info file \fBzebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH DIAGNOSTICS The ospf6d process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. \fBospf6d\fR supports many debugging options, see the Info file, or the source for details. - - .SH "SEE ALSO" -References to other related man pages: - -ripd(8), ripngd(8), ospfd(8), bgpd(8), zebra(8), vtysh(1) - - +.BR bgpd (8), +.BR ripd (8), +.BR ripngd (8), +.BR ospfd (8), +.BR isisd (8), +.BR zebra (8), +.BR vtysh (1) .SH BUGS .B ospf6d -eats bugs for breakfast. If you have food for the maintainers try +eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. diff --git a/doc/ospfd.8 b/doc/ospfd.8 index 1d28ed04..1fde9003 100644 --- a/doc/ospfd.8 +++ b/doc/ospfd.8 @@ -1,147 +1,108 @@ -.TH OSPFD 8 "July 2000" "Zebra Beast - OSPFD" "Version 0.88" - +.TH OSPFD 8 "10 August 2004" "Quagga OSPFv2 daemon" "Version 0.96.5" .SH NAME -ospfd \- an OSPF v2 routing engine for use with Zebra - +ospfd \- an OSPFv2 routing engine for use with Quagga routing software. .SH SYNOPSIS .B ospfd [ .B \-dhlv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user ] -[ -.B \-f config-file -] -[ -.B \-i pid-file -] -[ -.B \-P port-number -] -[ -.B \-A vty-address -] -[ -.B \-u user -] - .SH DESCRIPTION -.B ospfd -is a routing component that works with the -.B zebra +.B ospfd +is a routing component that works with the +.B Quagga routing engine. - - .SH OPTIONS - +Options available for the +.B ospfd +command: .TP \fB\-d\fR, \fB\-\-daemon\fR Runs in daemon mode, forking and exiting from tty. - .TP \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/ospfd.conf\fR. - .TP \fB\-h\fR, \fB\-\-help\fR A brief message. - .TP \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR When ospfd starts its process idenifier is written to \fB\fIpid-file\fR. The init system uses the recorded PID to stop or restart ospfd. The likely default is \fB\fI/var/run/ospfd.pid\fR. - .TP \fB\-l\fR, \fB\-\-log_mode\fR Turn verbose logging on. - .TP \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR Specify the port that the ospfd VTY will listen on. This defaults to 2604, as specified in \fB\fI/etc/services\fR. - .TP \fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR Specify the address that the ospfd VTY will listen on. Default is all intrefaces. - .TP \fB\-u\fR, \fB\-\-user \fR\fIuser\fR Specify the user and group to run as. User and group have to have same name at the moment. Default is \fIquagga\fR. - .TP \fB\-v\fR, \fB\-\-version\fR Print the version and exit. - - -.SH COMMANDS - -\fB router ospf \fR -\fB router zebra \fR -- (Move routes into kernel table) - -\fB network [NETWORK] area [OSPF-AREA-ID] \fR -\fB no network [NETWORK] \fR - -\fB show ip ospf interface \fR -\fB show ip ospf neighbor \fR -\fB show ip ospf database \fR -\fB show ip ospf route \fR - - -\fB debug ospf ism \fR -\fB debug ospf packet \fR -\fB debug ospf nsm \fR - - - .SH FILES - .TP .BI /usr/local/sbin/ospfd The default location of the .B ospfd binary. - .TP .BI /usr/local/etc/ospfd.conf The default location of the .B ospfd config file. - .TP .BI $(PWD)/ospfd.log If the .B ospfd process is config'd to output logs to a file, then you will find this file in the directory where you started \fBospfd\fR. - - .SH WARNING -This man page is intended as a quick reference for command line -options, and for config file commands. The definitive document is the -Info file \fBzebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH DIAGNOSTICS The ospfd process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. \fBospfd\fR supports many debugging options, see the Info file, or the source for details. - - .SH "SEE ALSO" -References to other related man pages: - -ripd(8), ripngd(8), ospf6d(8), bgpd(8), zebra(8), vtysh(1) - - +.BR bgpd (8), +.BR ripd (8), +.BR ripngd (8), +.BR ospf6d (8), +.BR isisd (8), +.BR zebra (8), +.BR vtysh (1) .SH BUGS .B ospfd -eats bugs for breakfast. If you have food for the maintainers try +eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. @@ -1,229 +1,107 @@ -.TH RIPD 8 "July 2000" "Zebra" "Version 0.88" - +.TH RIPD 8 "10 August 2004" "Quagga RIP daemon" "Version 0.96.5" .SH NAME -ripd \- a RIP routing engine for use with Zebra - +ripd \- a RIP routing engine for use with Quagga routing software. .SH SYNOPSIS .B ripd [ .B \-dhrv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user ] -[ -.B \-f config-file -] -[ -.B \-i pid-file -] -[ -.B \-P port-number -] -[ -.B \-A vty-address -] -[ -.B \-u user -] - - .SH DESCRIPTION -.B ripd -is a routing component that supports the -.B zebra -route engine. -.B ripd -supports RIPv1, RIPv2, and so forth. - - +.B ripd +is a routing component that works with the +.B Quagga +routing engine. +.SH OPTIONS +Options available for the +.B ripd +command: .SH OPTIONS - .TP \fB\-d\fR, \fB\-\-daemon\fR Runs in daemon mode, forking and exiting from tty. - .TP \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/ripd.conf\fR. - .TP \fB\-h\fR, \fB\-\-help\fR A brief message. - .TP \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR When ripd starts its process idenifier is written to \fB\fIpid-file\fR. The init system uses the recorded PID to stop or restart ripd. The likely default is \fB\fI/var/run/ripd.pid\fR. - .TP \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR Specify the port that the ripd VTY will listen on. This defaults to 2602, as specified in \fB\fI/etc/services\fR. - .TP \fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR Specify the address that the ripd VTY will listen on. Default is all intrefaces. - .TP \fB\-u\fR, \fB\-\-user \fR\fIuser\fR Specify the user and group to run as. User and group have to have same name at the moment. Default is \fIquagga\fR. - .TP \fB\-r\fR, \fB\-\-retain\fR When the program terminates, retain routes added by \fBripd\fR. - .TP \fB\-v\fR, \fB\-\-version\fR Print the version and exit. - - -.SH COMMANDS - -\fB router rip \fR -\fB no router rip \fR - -\fB rip version [1|2] \fR -\fB no rip version [1|2] \fR - -\fB network [A.B.C.D/M] \fR -\fB no network [A.B.C.D/M] \fR - -\fB network [IFNAME] \fR -\fB no network [IFNAME] \fR - -\fB neighbor [A.B.C.D] \fR -\fB no neighbor [A.B.C.D] \fR - -\fB redistribute kernel \fR -\fB redistribute kernel metric [METRIC]\fR -\fB redistribute kernel route-map [ROUTE-MAP]\fR -\fB no redistribute kernel \fR - -\fB redistribute static \fR -\fB redistribute static metric [METRIC]\fR -\fB redistribute static route-map [ROUTE-MAP]\fR -\fB no redistribute static \fR - -\fB redistribute connected \fR -\fB redistribute connected metric [METRIC]\fR -\fB redistribute connected route-map [ROUTE-MAP]\fR -\fB no redistribute connected \fR - -\fB redistribute ospf \fR -\fB redistribute ospf metric [METRIC]\fR -\fB redistribute ospf route-map [ROUTE-MAP]\fR -\fB no redistribute ospf \fR - -\fB redistribute bgp \fR -\fB redistribute bgp metric [METRIC]\fR -\fB redistribute bgp route-map [ROUTE-MAP]\fR -\fB no redistribute bgp \fR - -\fB route [A.B.C.D/M] \fR -\fB no route [A.B.C.D/M] \fR - -\fB default-information originate \fR -\fB no default-information originate \fR - -\fB default-metric [METRIC] \fR -\fB no default-metric [METRIC] \fR - -\fB passive-interface [IFNAME] \fR -\fB no passive-interface [IFNAME] \fR - -\fB offset-list [ACCESS-LIST] [in|out]\fR -\fB offset-list [ACCESS-LIST] [in|out] [IFNAME]\fR -\fB no offset-list [ACCESS-LIST] [in|out]\fR - -\fB timers basic [UPDATE-INTERVAL] [INVALID] [TIMEOUT] [GARBAGE-COLLECT] \fR -\fB no timers basic \fR - -\fB distribute-list [ACCESS-LIST] [in|out] [IFNAME] \fR -\fB no distribute-list [ACCESS-LIST] [in|out] [IFNAME] \fR - -\fB distribute-list prefix [PREFIX-LIST] [in|out] [IFNAME] \fR -\fB no distribute-list prefix [PREFIX-LIST] [in|out] [IFNAME] \fR - -\fB distance [DISTANCE] \fR -\fB no distance [DISTANCE] \fR - -\fB distance [DISTANCE] [A.B.C.D/M] \fR -\fB no distance [DISTANCE] [A.B.C.D/M] \fR - -\fB distance [DISTANCE] [A.B.C.D/M] [ACCESS-LIST]\fR -\fB no distance [DISTANCE] [A.B.C.D/M] [ACCESS-LIST]\fR - -\fB ip rip send version [VERSION] \fR -\fB no ip rip send version [VERSION] \fR -\fB ip rip receive version [VERSION] \fR -\fB no ip rip receive version [VERSION] \fR - -\fB ip rip authentication mode [md5|text]\fR -\fB no ip rip authentication mode [md5|text]\fR - -\fB ip rip authentication key-chain [KEY-CHAIN]\fR -\fB no ip rip authentication key-chain [KEY-CHAIN]\fR - -\fB ip rip authentication string [STRING]\fR -\fB no ip rip authentication string [STRING]\fR - -\fB ip spli-horizon\fR -\fB no ip spli-horizon\fR - -\fB show ip rip \fR -\fB show ip protocols \fR -\fB show debugging rip \fR - -\fB debug rip \fR -\fB debug rip events \fR -\fB debug rip packet \fR -\fB debug rip zebra \fR - .SH FILES - .TP .BI /usr/local/sbin/ripd The default location of the .B ripd binary. - .TP .BI /usr/local/etc/ripd.conf The default location of the .B ripd config file. - .TP .BI $(PWD)/ripd.log If the .B ripd process is config'd to output logs to a file, then you will find this file in the directory where you started \fBripd\fR. - - .SH WARNING -This man page is intended as a quick reference for command line options, and for config file commands. The definitive document is the Info file \fBzebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH DIAGNOSTICS -The ripd process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. -.B ripd -supports many debugging options, see the Info file, or the source for details. - - +The ripd process may log to standard output, to a VTY, to a log +file, or through syslog to the system logs. \fBripd\fR supports many +debugging options, see the Info file, or the source for details. .SH "SEE ALSO" -References to other related man pages: - -ripngd(8), ospfd(8), ospf6d(8), bgpd(8), zebra(8) - - - +.BR bgpd (8), +.BR ripngd (8), +.BR ospfd (8), +.BR ospf6d (8), +.BR isisd (8), +.BR zebra (8), +.BR vtysh (1) .SH BUGS .B ripd -eats bugs for breakfast. If you have food for the maintainers try +eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. diff --git a/doc/ripngd.8 b/doc/ripngd.8 index de64ce89..1dee0bbc 100644 --- a/doc/ripngd.8 +++ b/doc/ripngd.8 @@ -1,160 +1,112 @@ -.TH RIPNGD 8 "July 2000" "Zebra Beast - RIPNGD" "Version 0.88" - +.TH RIPNGD 8 "10 August 2004" "Quagga RIPNG daemon" "Version 0.96.5" .SH NAME -ripngd \- a RIP routing engine for use with Zebra and IPv6 - +ripngd \- a RIPNG routing engine for use with Quagga routing software. .SH SYNOPSIS .B ripngd [ .B \-dhlrv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user ] -[ -.B \-f config-file -] -[ -.B \-i pid-file -] -[ -.B \-P port-number -] -[ -.B \-A vty-address -] -[ -.B \-u user -] - - .SH DESCRIPTION -.B ripngd -is a routing component that works with the -.B zebra +.B ripngd +is a routing component that works with the +.B Quagga routing engine. - - - .SH OPTIONS - +Options available for the +.B ripngd +command: +.SH OPTIONS .TP \fB\-d\fR, \fB\-\-daemon\fR Runs in daemon mode, forking and exiting from tty. - .TP \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/ripngd.conf\fR. - .TP \fB\-h\fR, \fB\-\-help\fR A brief message. - .TP \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR When ripngd starts its process idenifier is written to \fB\fIpid-file\fR. The init system uses the recorded PID to stop or restart ripngd. The likely default is \fB\fI/var/run/ripngd.pid\fR. - .TP \fB\-l\fR, \fB\-\-log_mode\fR Turn verbose logging on. - .TP \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR Specify the port that the ripngd VTY will listen on. This defaults to 2603, as specified in \fB\fI/etc/services\fR. - .TP \fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR Specify the address that the ripngd VTY will listen on. Default is all intrefaces. - .TP \fB\-u\fR, \fB\-\-user \fR\fIuser\fR Specify the user and group to run as. User and group have to have same name at the moment. Default is \fIquagga\fR. - .TP \fB\-r\fR, \fB\-\-retain\fR When the program terminates, retain routes added by \fBripd\fR. - .TP \fB\-v\fR, \fB\-\-version\fR Print the version and exit. - - -.SH COMMANDS - -\fB router ripng \fR -\fB router zebra \fR -- (Move routes into kernel table) - -\fB network [NETWORK] \fR -\fB no network [NETWORK] \fR - -\fB network [IFNAME] \fR -\fB no network [IFNAME] \fR - -\fB route [NETWORK] \fR -\fB no route [NETWORK] \fR - -\fB flush_timer [FLUSH] \fR - -\fB distribute-list [ACCESS-LIST] [in|out] [IFNAME] \fR - -\fB show ip ripng \fR -\fB show debugging ripng \fR - -\fB debug ripng \fR -\fB debug ripng events \fR -\fB debug ripng packet \fR -\fB debug ripng zebra \fR - - - .SH FILES - .TP .BI /usr/local/sbin/ripngd The default location of the .B ripngd binary. - .TP .BI /usr/local/etc/ripngd.conf The default location of the .B ripngd config file. - .TP .BI $(PWD)/ripngd.log If the .B ripngd process is config'd to output logs to a file, then you will find this file in the directory where you started \fBripngd\fR. - - .SH WARNING -This man page is intended as a quick reference for command line -options, and for config file commands. The definitive document is the -Info file \fBzebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH DIAGNOSTICS The ripngd process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. \fBripngd\fR supports many debugging options, see the Info file, or the source for details. - - .SH "SEE ALSO" -References to other related man pages: - -ripd(8), ospfd(8), ospf6d(8), bgpd(8), zebra(8), vtysh(1) - +.BR bgpd (8), +.BR ripd (8), +.BR ospfd (8), +.BR ospf6d (8), +.BR isisd (8), +.BR zebra (8), +.BR vtysh (1) .SH BUGS .B ripngd -eats bugs for breakfast. If you have food for the maintainers try +eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. diff --git a/doc/vtysh.1 b/doc/vtysh.1 index 7422fa5e..f6ad62b5 100644 --- a/doc/vtysh.1 +++ b/doc/vtysh.1 @@ -1,72 +1,79 @@ -.TH VTYSH 1 "July 2000" "Zebra Beast - VTY shell" "Version 0.88" - +.TH VTYSH 1 "10 August 2004" "Quagga VTY shell" "Version 0.96.5" .SH NAME -vtysh \- a integrated shell for Zebra routing software - +vtysh \- a integrated shell for Quagga routing software .SH SYNOPSIS .B vtysh [ -.B \-e command +.B \-b ] - -.SH DESCBGPTION +.br +.B vtysh +[ +.B \-c +.I command +] +.SH DESCRIPTION .B vtysh is a integrated shell for -.B Zebra +.B Quagga routing engine. - - .SH OPTIONS - -.TP -\fB\-c -Specify command to be executed under batch mode. - - -.SH COMMANDS - -\fB Almost Zebra commands. - -\fB ping -\fB traceroute -\fB telnnet - -\fB start-shell -\fB start-shell bash -\fB start-shell zsh - +Options available for the +.B vtysh +command: +.IP "\fB\-b, \-\-boot\fP" +Execute boot startup configuration. It makes sense only if integrated config +file is in use (not default in Quagga). See Info file \fBQuagga\fR for more +info. +.IP "\fB\-c, \-\-command \fIcommand\fP" +Specify command to be executed under batch mode. It behaves like -c option in +any other shell - +.I command +is executed and vtysh exits. + +It's useful for gathering info from Quagga routing software from shell scripts +etc. +.IP "\fB\-e, \-\-execute \fIcommand\fP" +Alias for -c. It's only for compatibility with Zebra routing software and older +Quagga versions and this might be removed in future. +.IP "\fB\-h, \-\-help\fP" +Display a usage message on standard output and exit. .SH ENVIRONMENT VARIABLES - .IP "\fBVTYSH_PAGER\fR" This should be the name of the pager to use. Default is \fBmore\fR. - .SH FILES - .TP -.BI /usr/local/etc/Zebra.conf +.BI /usr/local/etc/vtysh.conf The default location of the .B vtysh config file. - - +.TP +.BI /usr/local/etc/Quagga.conf +The default location of the integrated Quagga routing engine config file +if integrated config file is in use (not default). .SH WARNING -This man page is intended as a quick reference for command line -options, and for config file commands. The definitive document is the -Info file \fBZebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH "SEE ALSO" -References to other related man pages: - -bgpd(8), ripd(8), ripngd(8), ospfd(8), ospf6d(8), zebra(8) - - +.BR bgpd (8), +.BR ripd (8), +.BR ripngd (8), +.BR ospfd (8), +.BR ospf6d (8), +.BR isisd (8), +.BR zebra (8) .SH BUGS +Running the command which outputs large amount of data through pager ("show ip +ospf database", "show ip bgp" etc. in big networks) will cause daemon to be +unresponsive until vtysh returns back to the prompt. + .B vtysh eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. diff --git a/doc/zebra.8 b/doc/zebra.8 index e3e974b7..8f830152 100644 --- a/doc/zebra.8 +++ b/doc/zebra.8 @@ -1,163 +1,118 @@ -.TH ZEBRA 8 "July 2000" "Zebra" "Version 0.88" - +.TH ZEBRA 8 "10 August 2004" "Zebra daemon" "Version 0.96.5" .SH NAME -zebra \- a routing manager for use with associated components - +zebra \- a routing manager for use with associated Quagga components. .SH SYNOPSIS .B zebra [ .B \-bdhklrv +] [ +.B \-f +.I config-file +] [ +.B \-i +.I pid-file +] [ +.B \-P +.I port-number +] [ +.B \-A +.I vty-address +] [ +.B \-u +.I user ] -[ -.B \-f config-file -] -[ -.B \-i pid-file -] -[ -.B \-P port-number -] -[ -.B \-A vty-address -] -[ -.B \-u user -] - - .SH DESCRIPTION .B zebra is a routing manager that implements the .B zebra route engine. .B zebra -supports RIPv1, RIPv2, RIPng, OSPF, OSPF6, BGP4+, and BGP4-. - - +supports RIPv1, RIPv2, RIPng, OSPF, OSPF6, IS-IS, BGP4+, and BGP4-. .SH OPTIONS - +Options available for the +.B zebra +command: .TP \fB\-b\fR, \fB\-\-batch\fR Runs in batch mode, \fBzebra\fR parses its config and exits. - .TP \fB\-d\fR, \fB\-\-daemon\fR Runs in daemon mode, forking and exiting from tty. - .TP \fB\-f\fR, \fB\-\-config-file \fR\fIconfig-file\fR Specifies the config file to use for startup. If not specified this option will likely default to \fB\fI/usr/local/etc/zebra.conf\fR. - .TP \fB\-h\fR, \fB\-\-help\fR A brief message. - .TP \fB\-i\fR, \fB\-\-pid_file \fR\fIpid-file\fR When zebra starts its process idenifier is written to \fB\fIpid-file\fR. The init system uses the recorded PID to stop or restart zebra. The likely default is \fB\fI/var/run/zebra.pid\fR. - .TP \fB\-k\fR, \fB\-\-keep_kernel\fR On startup, don't delete self inserted routes. - .TP \fB\-l\fR, \fB\-\-log_mode\fR Turn verbose logging on. - .TP \fB\-P\fR, \fB\-\-vty_port \fR\fIport-number\fR Specify the port that the zebra VTY will listen on. This defaults to 2602, as specified in \fB\fI/etc/services\fR. - .TP \fB\-A\fR, \fB\-\-vty_addr \fR\fIvty-address\fR Specify the address that the zebra VTY will listen on. Default is all intrefaces. - .TP \fB\-u\fR, \fB\-\-user \fR\fIuser\fR Specify the user and group to run as. User and group have to have same name at the moment. Default is \fIquagga\fR. - .TP \fB\-r\fR, \fB\-\-retain\fR When the program terminates, retain routes added by \fBzebra\fR. - .TP \fB\-v\fR, \fB\-\-version\fR Print the version and exit. - - -.SH COMMANDS - -\fB table [TABLENO] \fR -- for use with multi-table kernels - -\fB ip route [NETWORK] [GATEWAY] \fR -\fB ipv6 route [NETWORK] [GATEWAY] \fR - -\fB show ip route \fR -\fB show ipv6 route \fR -\fB show interface \fR -\fB show ipforward \fR -\fB show ipv6forward \fR - -.TP -\fB interface [IFNAME] \fR -\fB shutdown \fR -\fB no shutdown \fR -\fB ip address [IP-ADDRESS] \fR -\fB description [DESCRIPTION] \fR -\fB multicast \fR -\fB no multicast \fR - - .SH FILES - .TP .BI /usr/local/sbin/zebra The default location of the .B zebra binary. - .TP .BI /usr/local/etc/zebra.conf The default location of the .B zebra config file. - .TP .BI $(PWD)/zebra.log If the .B zebra process is config'd to output logs to a file, then you will find this file in the directory where you started \fBzebra\fR. - - .SH WARNING -This man page is intended as a quick reference for command line options, and for config file commands. The definitive document is the Info file \fBzebra\fR. - - +This man page is intended to be a quick reference for command line +options. The definitive document is the Info file \fBQuagga\fR. .SH DIAGNOSTICS -The zebra process may log to standard output, to a VTY, to a log file, or through syslog to the system logs. -.B zebra -supports many debugging options, see the Info file, or the source for details. - - +The zebra process may log to standard output, to a VTY, to a log +file, or through syslog to the system logs. \fBzebra\fR supports many +debugging options, see the Info file, or the source for details. .SH "SEE ALSO" -References to other related man pages: - -ripngd(8), ospfd(8), ospf6d(8), bgpd(8), zebra(8), vtysh(1) - - - +.BR bgpd (8), +.BR ripd (8), +.BR ripngd (8), +.BR ospfd (8), +.BR ospf6d (8), +.BR isisd (8), +.BR vtysh (1) .SH BUGS .B zebra -eats bugs for breakfast. If you have food for the maintainers try +eats bugs for breakfast. If you have food for the maintainers try .BI http://bugzilla.quagga.net - - -.SH AUTHOR[S] -See <\fBwww.zebra.org\fR>, or the Info file for an accurate list of authors. +.SH AUTHORS +See +.BI http://www.zebra.org +and +.BI http://www.quagga.org +or the Info file for an accurate list of authors. |