diff options
Diffstat (limited to 'doc/quagga.info')
| -rw-r--r-- | doc/quagga.info | 311 |
1 files changed, 159 insertions, 152 deletions
diff --git a/doc/quagga.info b/doc/quagga.info index b48285c6..a347b411 100644 --- a/doc/quagga.info +++ b/doc/quagga.info @@ -778,6 +778,13 @@ File: quagga.info, Node: Basic Config Commands, Next: Sample Config File, Up: can be changed using the deprecated `log trap' command) will be used. The `no' form of the command disables logging to a file. + Note: if you do not configure any file logging, and a daemon + crashes due to a signal or an assertion failure, it will attempt + to save the crash information in a file named + /var/tmp/quagga.<daemon name>.crashlog. For security reasons, + this will not happen if the file exists already, so it is + important to delete the file after reporting the crash information. + -- Command: log syslog -- Command: log syslog LEVEL -- Command: no log syslog @@ -5177,7 +5184,7 @@ Command Index * Menu: * access-class ACCESS-LIST: Basic Config Commands. - (line 121) + (line 128) * access-list NAME deny IPV4-NETWORK: IP Access List. (line 8) * access-list NAME permit IPV4-NETWORK: IP Access List. (line 7) * aggregate-address A.B.C.D/M: Route Aggregation. (line 7) @@ -5214,7 +5221,7 @@ Command Index * auto-cost refrence-bandwidth <1-4294967>: OSPF router. (line 53) * bandwidth <1-10000000>: Interface Commands. (line 31) * banner motd default: Basic Config Commands. - (line 103) + (line 110) * bgp cluster-id A.B.C.D: Route Reflector. (line 7) * bgp config-type cisco: Multiple instance. (line 20) * bgp config-type zebra: Multiple instance. (line 49) @@ -5308,9 +5315,9 @@ Command Index * enable password PASSWORD: Basic Config Commands. (line 14) * exec-timeout MINUTE: Basic Config Commands. - (line 109) + (line 116) * exec-timeout MINUTE SECOND: Basic Config Commands. - (line 110) + (line 117) * flush_timer TIME: ripngd Configuration. (line 12) * hostname HOSTNAME: Basic Config Commands. @@ -5394,30 +5401,30 @@ Command Index * ipv6 route NETWORK GATEWAY DISTANCE: Static Route Commands. (line 78) * line vty: Basic Config Commands. - (line 100) + (line 107) * link-detect: Interface Commands. (line 37) * list: Terminal Mode Commands. (line 24) * log facility FACILITY: Basic Config Commands. - (line 74) + (line 81) * log file FILENAME: Basic Config Commands. (line 41) * log file FILENAME LEVEL: Basic Config Commands. (line 42) * log monitor: Basic Config Commands. - (line 61) + (line 68) * log monitor LEVEL: Basic Config Commands. - (line 62) + (line 69) * log record-priority: Basic Config Commands. - (line 80) + (line 87) * log stdout: Basic Config Commands. (line 28) * log stdout LEVEL: Basic Config Commands. (line 29) * log syslog: Basic Config Commands. - (line 52) + (line 59) * log syslog LEVEL: Basic Config Commands. - (line 53) + (line 60) * log trap LEVEL: Basic Config Commands. (line 17) * logmsg LEVEL MESSAGE: Terminal Mode Commands. @@ -5523,7 +5530,7 @@ Command Index * no auto-cost refrence-bandwidth: OSPF router. (line 54) * no bandwidth <1-10000000>: Interface Commands. (line 32) * no banner motd: Basic Config Commands. - (line 106) + (line 113) * no bgp multiple-instance: Multiple instance. (line 14) * no debug event: More Show IP BGP. (line 39) * no debug keepalive: More Show IP BGP. (line 43) @@ -5556,7 +5563,7 @@ Command Index * no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF. (line 42) * no exec-timeout: Basic Config Commands. - (line 117) + (line 124) * no ip address ADDRESS/PREFIX: Interface Commands. (line 15) * no ip address ADDRESS/PREFIX secondary: Interface Commands. (line 20) * no ip as-path access-list WORD: AS Path Access List. (line 12) @@ -5606,17 +5613,17 @@ Command Index (line 7) * no link-detect: Interface Commands. (line 38) * no log facility: Basic Config Commands. - (line 75) + (line 82) * no log file: Basic Config Commands. (line 43) * no log monitor: Basic Config Commands. - (line 63) + (line 70) * no log record-priority: Basic Config Commands. - (line 81) + (line 88) * no log stdout: Basic Config Commands. (line 30) * no log syslog: Basic Config Commands. - (line 54) + (line 61) * no log trap: Basic Config Commands. (line 18) * no multicast: Interface Commands. (line 28) @@ -5766,13 +5773,13 @@ Command Index (line 24) * router-id A.B.C.D: OSPF6 router. (line 9) * service advanced-vty: Basic Config Commands. - (line 93) + (line 100) * service integrated-vtysh-config: VTY shell integrated configuration. (line 7) * service password-encryption: Basic Config Commands. - (line 90) + (line 97) * service terminal-length <0-512>: Basic Config Commands. - (line 96) + (line 103) * set as-path prepend AS-PATH: Using AS Path in Route Map. (line 9) * set as-path prepend AS_PATH: Route Map Set Command. @@ -6020,137 +6027,137 @@ Node: Install the Software22090 Node: Basic commands23550 Node: Config Commands24325 Node: Basic Config Commands25218 -Node: Sample Config File30316 -Node: Terminal Mode Commands31086 -Node: Common Invocation Options32183 -Node: Virtual Terminal Interfaces33590 -Node: VTY Overview34101 -Node: VTY Modes35352 -Node: VTY View Mode35802 -Node: VTY Enable Mode36052 -Node: VTY Other Modes36330 -Node: VTY CLI Commands36506 -Node: CLI Movement Commands36966 -Node: CLI Editing Commands37489 -Node: CLI Advanced Commands38077 -Node: Zebra38843 -Node: Invoking zebra39352 -Node: Interface Commands39931 -Node: Static Route Commands41463 -Node: zebra Terminal Mode Commands44736 -Node: RIP45701 -Node: Starting and Stopping ripd46638 -Node: RIP netmask48051 -Node: RIP Configuration49150 -Node: How to Announce RIP route53415 -Node: Filtering RIP Routes55978 -Node: RIP Metric Manipulation57445 -Node: RIP distance58358 -Node: RIP route-map59173 -Node: RIP Authentication61689 -Node: RIP Timers62796 -Node: Show RIP Information64082 -Node: RIP Debug Commands65455 -Node: RIPng66451 -Node: Invoking ripngd66771 -Node: ripngd Configuration67020 -Node: ripngd Terminal Mode Commands67771 -Node: ripngd Filtering Commands68135 -Node: OSPFv268644 -Node: Configuring ospfd69203 -Node: OSPF router69671 -Node: OSPF area72827 -Node: OSPF interface78009 -Node: Redistribute routes to OSPF81392 -Node: Showing OSPF information83555 -Node: Debugging OSPF84801 -Node: OSPFv385840 -Node: OSPF6 router86160 -Node: OSPF6 area86514 -Node: OSPF6 interface86692 -Node: Redistribute routes to OSPF687569 -Node: Showing OSPF6 information87885 -Node: BGP88705 -Node: Starting BGP89595 -Node: BGP router90172 -Node: BGP distance91416 -Node: BGP decision process91854 -Node: BGP network92124 -Node: BGP route92314 -Node: Route Aggregation92870 -Node: Redistribute to BGP93439 -Node: BGP Peer93966 -Node: Defining Peer94153 -Node: BGP Peer commands94766 -Node: Peer filtering97170 -Node: BGP Peer Group97678 -Node: BGP Address Family97991 -Node: Autonomous System98145 -Node: AS Path Regular Expression98982 -Node: Display BGP Routes by AS Path100229 -Node: AS Path Access List100669 -Node: Using AS Path in Route Map101136 -Node: Private AS Numbers101417 -Node: BGP Communities Attribute101575 -Node: BGP Community Lists104042 -Node: Numbered BGP Community Lists106696 -Node: BGP Community in Route Map108283 -Node: Display BGP Routes by Community110226 -Node: Using BGP Communities Attribute111395 -Node: BGP Extended Communities Attribute114963 -Node: BGP Extended Community Lists116735 -Node: BGP Extended Communities in Route Map118610 -Node: Displaying BGP routes119069 -Node: Show IP BGP119306 -Node: More Show IP BGP120006 -Node: Capability Negotiation121157 -Node: Route Reflector124461 -Node: Route Server124740 -Node: Multiple instance125806 -Node: BGP instance and view127617 -Node: Routing policy128997 -Node: Viewing the view129765 -Node: How to set up a 6-Bone connection130050 -Node: Dump BGP packets and table131422 -Node: Configuring Quagga as a Route Server131969 -Node: Description of the Route Server model132930 -Ref: fig:normal-processing134507 -Ref: fig:full-mesh134657 -Ref: fig:route-server134753 -Ref: filter-delegation135167 -Ref: Route Server tasks136351 -Ref: Route-server path filter process136722 -Ref: fig:rs-processing139036 -Node: Commands for configuring a Route Server139153 -Node: Example of Route Server Configuration142180 -Node: Configuration of the BGP routers without Route Server143101 -Node: Configuration of the BGP routers with Route Server145984 -Node: Configuration of the Route Server itself147285 -Node: Further considerations about Import and Export route-maps152284 -Node: VTY shell155328 -Node: VTY shell username155997 -Node: VTY shell integrated configuration156629 -Node: Filtering158077 -Node: IP Access List158430 -Node: IP Prefix List158816 -Node: ip prefix-list description161835 -Node: ip prefix-list sequential number control162362 -Node: Showing ip prefix-list162904 -Node: Clear counter of ip prefix-list164012 -Node: Route Map164451 -Node: Route Map Command164956 -Node: Route Map Match Command165153 -Node: Route Map Set Command165777 -Node: IPv6 Support166654 -Node: Router Advertisement167226 -Node: Kernel Interface171027 -Node: SNMP Support172984 -Node: Getting and installing an SNMP agent173556 -Node: SMUX configuration174129 -Node: MIB and command reference176265 -Node: Zebra Protocol177652 -Node: Packet Binary Dump Format179566 -Node: Command Index191176 -Node: VTY Key Index247369 +Node: Sample Config File30708 +Node: Terminal Mode Commands31478 +Node: Common Invocation Options32575 +Node: Virtual Terminal Interfaces33982 +Node: VTY Overview34493 +Node: VTY Modes35744 +Node: VTY View Mode36194 +Node: VTY Enable Mode36444 +Node: VTY Other Modes36722 +Node: VTY CLI Commands36898 +Node: CLI Movement Commands37358 +Node: CLI Editing Commands37881 +Node: CLI Advanced Commands38469 +Node: Zebra39235 +Node: Invoking zebra39744 +Node: Interface Commands40323 +Node: Static Route Commands41855 +Node: zebra Terminal Mode Commands45128 +Node: RIP46093 +Node: Starting and Stopping ripd47030 +Node: RIP netmask48443 +Node: RIP Configuration49542 +Node: How to Announce RIP route53807 +Node: Filtering RIP Routes56370 +Node: RIP Metric Manipulation57837 +Node: RIP distance58750 +Node: RIP route-map59565 +Node: RIP Authentication62081 +Node: RIP Timers63188 +Node: Show RIP Information64474 +Node: RIP Debug Commands65847 +Node: RIPng66843 +Node: Invoking ripngd67163 +Node: ripngd Configuration67412 +Node: ripngd Terminal Mode Commands68163 +Node: ripngd Filtering Commands68527 +Node: OSPFv269036 +Node: Configuring ospfd69595 +Node: OSPF router70063 +Node: OSPF area73219 +Node: OSPF interface78401 +Node: Redistribute routes to OSPF81784 +Node: Showing OSPF information83947 +Node: Debugging OSPF85193 +Node: OSPFv386232 +Node: OSPF6 router86552 +Node: OSPF6 area86906 +Node: OSPF6 interface87084 +Node: Redistribute routes to OSPF687961 +Node: Showing OSPF6 information88277 +Node: BGP89097 +Node: Starting BGP89987 +Node: BGP router90564 +Node: BGP distance91808 +Node: BGP decision process92246 +Node: BGP network92516 +Node: BGP route92706 +Node: Route Aggregation93262 +Node: Redistribute to BGP93831 +Node: BGP Peer94358 +Node: Defining Peer94545 +Node: BGP Peer commands95158 +Node: Peer filtering97562 +Node: BGP Peer Group98070 +Node: BGP Address Family98383 +Node: Autonomous System98537 +Node: AS Path Regular Expression99374 +Node: Display BGP Routes by AS Path100621 +Node: AS Path Access List101061 +Node: Using AS Path in Route Map101528 +Node: Private AS Numbers101809 +Node: BGP Communities Attribute101967 +Node: BGP Community Lists104434 +Node: Numbered BGP Community Lists107088 +Node: BGP Community in Route Map108675 +Node: Display BGP Routes by Community110618 +Node: Using BGP Communities Attribute111787 +Node: BGP Extended Communities Attribute115355 +Node: BGP Extended Community Lists117127 +Node: BGP Extended Communities in Route Map119002 +Node: Displaying BGP routes119461 +Node: Show IP BGP119698 +Node: More Show IP BGP120398 +Node: Capability Negotiation121549 +Node: Route Reflector124853 +Node: Route Server125132 +Node: Multiple instance126198 +Node: BGP instance and view128009 +Node: Routing policy129389 +Node: Viewing the view130157 +Node: How to set up a 6-Bone connection130442 +Node: Dump BGP packets and table131814 +Node: Configuring Quagga as a Route Server132361 +Node: Description of the Route Server model133322 +Ref: fig:normal-processing134899 +Ref: fig:full-mesh135049 +Ref: fig:route-server135145 +Ref: filter-delegation135559 +Ref: Route Server tasks136743 +Ref: Route-server path filter process137114 +Ref: fig:rs-processing139428 +Node: Commands for configuring a Route Server139545 +Node: Example of Route Server Configuration142572 +Node: Configuration of the BGP routers without Route Server143493 +Node: Configuration of the BGP routers with Route Server146376 +Node: Configuration of the Route Server itself147677 +Node: Further considerations about Import and Export route-maps152676 +Node: VTY shell155720 +Node: VTY shell username156389 +Node: VTY shell integrated configuration157021 +Node: Filtering158469 +Node: IP Access List158822 +Node: IP Prefix List159208 +Node: ip prefix-list description162227 +Node: ip prefix-list sequential number control162754 +Node: Showing ip prefix-list163296 +Node: Clear counter of ip prefix-list164404 +Node: Route Map164843 +Node: Route Map Command165348 +Node: Route Map Match Command165545 +Node: Route Map Set Command166169 +Node: IPv6 Support167046 +Node: Router Advertisement167618 +Node: Kernel Interface171419 +Node: SNMP Support173376 +Node: Getting and installing an SNMP agent173948 +Node: SMUX configuration174521 +Node: MIB and command reference176657 +Node: Zebra Protocol178044 +Node: Packet Binary Dump Format179958 +Node: Command Index191568 +Node: VTY Key Index247761 End Tag Table |