summaryrefslogtreecommitdiff
path: root/ripd
diff options
context:
space:
mode:
Diffstat (limited to 'ripd')
-rw-r--r--ripd/ChangeLog1217
1 files changed, 0 insertions, 1217 deletions
diff --git a/ripd/ChangeLog b/ripd/ChangeLog
deleted file mode 100644
index 60baef5d..00000000
--- a/ripd/ChangeLog
+++ /dev/null
@@ -1,1217 +0,0 @@
-2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com>
-
- * ripd.c: (rip_auth_md5) fix bogus empty string test
-
-2008-03-13 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.c/rip_interface.c: Remove 0 entries from rip_msg
- ri_version_msg struct message's, not needed with recent fixes
- to mes_lookup.
-
-2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now.
-
-2007-04-11 Emmanuel Vize <emmanuel.vize@6wind.com>
-
- * ripd.c: (rip_vty_out_uptime) Use new thread_timer_remain_second
- to display properly the route timeout, displayed by "show ip rip"
-
-2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second
- function instead of rip_next_thread_timer to display the time until
- next update properly.
- (rip_next_thread_timer) Remove obsolete function.
-
-2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
- macro to simplify logic.
- (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
- not give a useful result if prefixlen is 32 (we require a peer
- address in such cases).
- * ripd.c: (rip_update_interface) Fix same bug as above.
-
-2006-09-11 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.c: (rip_read) remove gratuitous use of mid-function
- declaration of vrecv, bug #278.
- * rip_routemap.c: (route_set_metric) underflow check needs to
- use signed, problem identified and diagnosed by Pavel
- Nikiforov in bug #293.
-
-2006-06-29 Paul Jakma <paul.jakma@sun.com>
-
- * rip_zebra: (general) convert redistribute commands to use
- the auto-generated defines.
-
-2006-05-04 Paul Jakma <paul.jakma@sun.com>
-
- * (general) Fixes for bugs #261 and 262. Thanks to
- Konstantin V. Gavrilenko <kos@arhont.com> for the problem
- reports, testing of a series of proposed patches and comment
- on the proposed changes in behaviour.
- * rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all
- of the command before making any changes to configured state.
- * ripd.c: (rip_read) RIP version control should be absolute and
- always apply, fixes bug #261 by allowing RIPv1 to be disabled.
- Fix bug #262: If authentication is enabled, then
- unauthenticated packets should not be accepted. We do however
- make an exception for RIPv1 REQUEST packets, to which we will
- reply as RIPv1 can now be disabled fully, to allow ripd to
- still provide routing /information/ to simple devices.
-
-2006-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_update_process) Try to fix the logic for sending
- an updated on each connected network. The new code will
- attempt to send the update on each connected network, whereas
- the previous code seemed to be attempting to avoid sending
- more than one RIPv1 update on a given interface, but was coded
- incorrectly. The actual effect of the old code was to send
- an update only on the first connected address in the cases
- where the interface is not multicast, or RIPv2 is not being used.
-
-2006-01-30 Alain Ritoux <alain.ritoux@6wind.com>
-
- * ripd.c: correct bug that allowed route learnt through RIP to take
- precedence over connectd routes
-
-2006-01-19 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.c: (main) return from main, not exit, cause it annoys SOS.
-
-2006-01-17 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.c: (rip_auth_md5) remove pdigest, not needed.
- Use a local buffer for the auth_str, where it can be properly
- nul padded. Do so, hence fixing MD5 authentication.
- Key looked up via key ring should be used in preference to
- the RIPv1 simple password, not other way around.
- No need to copy around digests, we can reference them
- directly.
- The auth_len received can't be trusted, some implementations
- lie (e.g. older ripd).
- (rip_auth_md5_ah_write) rename len local variable to doff
- to be consistent with other functions.
- (rip_auth_header_write) add the missing return.
- (rip_auth_md5_set) use the proper constructs to access stream.
-
-2005-10-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_response_process) Instead of calling
- rip_interface.c:if_valid_neighbor(), call the equivalent
- library function if_lookup_address().
- * rip_interface.c: (if_valid_neighbor) Remove function, since it is
- essentially equivalent to the if_lookup_address() library function.
- * ripd.h: (if_valid_neighbor) Remove function declaration.
-
-2005-10-28 Paul Jakma <paul.jakma@sun.com>
-
- * Makefile.am: Add rip_interface.h, or else it doesn't get
- included in dists.
-
-2005-10-26 Paul Jakma <paul.jakma@sun.com>
-
- * (general) static/extern functions and definitions.
- * rip_interface.h: new file, export the public functions from
- rip_interface.c
- * ripd.c: Update couple more functions to specify void
- explicitely.
-
-2005-10-17 Vincent Jardin <vincent.jardin@6wind.com>
-
- * ripd.c: rip_create_socket() for each packet, it does not bind to the
- proper interfaces because we forget to use the from address when
- it is specified.
-
-2005-10-06 Alain Ritoux <alain.ritoux@6wind.com>
-
- * rip_interface.c: Now the command "no ip rip split-horizon
- poisoned-reverse" just inhibates the poisoned-reverse effects
- but keep spli-horizon activ.
-
-2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
- table str[]. Replace str[] with calls to new library function
- zebra_route_string().
- * ripd.c: Remove local hard-coded table route_info[].
- (show_ip_rip) Replace uses of str[] with calls to new library
- functions zebra_route_char and zebra_route_string.
-
-2005-09-29 Alain Ritoux <alain.ritoux@6wind.com>
-
- * rip_snmp.c: rip2IfConfReceive() sends values in conformance
- with RFC. Also PeerDomain is now set to a STRING type.
- * ripd.h: rip_redistribute_add() API includes metric and distance
- added field external_metric in routes.
- * ripd.c: rip_redistribute_add() API i.e. stores metric and distance
- Now allows a RIP-route to overcome a redistributed route coming
- from a protocol with worse (higher) administrative distance
- Metrics from redistribution are shown in show ip rip
- * rip_zebra.c: adapt to the rip_redistribute_add() API, i.e.
- provide distance and metric
- * rip_interface.c: adapt to the rip_redistribute_add() API
- * rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage
- rather a CMD_WARNING, because set metric ius shared with other
- protocols using larger values (such as OSPF)
- The match metric action takes first external metric if present
- (from redistribution) then RIP metric.
-
-2005-09-28 Alain Ritoux <alain.ritoux@6wind.com>
-
- * ripd.c: use new md5 API
-
-2005-08-16 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.c: (general) Fix previous commit, broke multicast bind and
- hence setting of source port, which broke communication with
- non-borken ripd. Fix removes more stuff from rip_interface.c
- than it adds to ripd.c ;)
- (rip_create_socket) the to argument really is a from argument,
- rename it. Set the source port to RIP port unconditionally, it's
- required.
- (rip_send_packet) Set from address correctly for multicast.
- (rip_output_process) trivial: num can be BSS specified, rather
- than in body.
- * rip_interface.c: (rip_interface_multicast_set) strip out
- redundant stuff related to bind, which rip_create_socket does.
- Just make it set the multicast socket option, as per the
- interface concerned, no more.
-
-2005-06-03 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.c: (rip_create_socket) move it up so rip_send_packet
- can use it too. Make it static. Remove the getservbyname stuff,
- as RFC2453 3.9.2 says non-RIP port messages should be discarded,
- quagga doesnt accept them, no need to lookup port.
- Take a 'to' argument, if socket should be bound to something else.
- setsockopt_so_recvbuf might need privs, move it to the raised
- privileges section.
- dont forget to close the socket if bind fails.
- (rip_send_packet) use strncpy, just in case (address is under
- our control anyway, but still).
- dont duplicate rip_create_socket - just use it.
- (rip_create) rip_create_socket takes an argument now, modify.
-
-2005-06-01 Paul Jakma <paul.jakma@sun.com>
-
- * rip_interface.c: Fix authentication, no-auth impossible to specify
- (rip_interface_new) default to RIP_NO_AUTH
- (rip_interface_reset) ditto
- (rip_interface_config_write) write out config for simple
-
-2005-05-29 Paul Jakma <paul@dishone.st>
-
- * ripd.c: (rip_output_process) fix error which crept in my
- previous rip auth untanglement commit - it had become impossible
- to not have authentication (even for v1).
-
-2005-05-28 Hasso Tepper <hasso at quagga.net>
-
- * rip_routemap.c: Fix set_metric_addsub_cmd help, it's not about BGP
- metric.
-
-2005-05-26 Hasso Tepper <hasso at quagga.net>
-
- * rip_routemap.c: In case of '0.0.0.0' used as 'nexthop', use sender
- address as nexthop in routemap.
-
-2005-05-26 Hasso Tepper <hasso at quagga.net>
-
- * rip_routemap.c: Make "match interface" routemap command match both -
- in and out interfaces.
-
-2005-05-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_interface.c (rip_interface_add): Need to call
- rip_passive_interface_apply (was already calling it in
- rip_interface_up).
-
-2005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,
- rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send
- from zclient->sock to zclient.
-
-2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_interface.c: (rip_interface_delete) After deleting, set
- ifp->ifindex to IFINDEX_INTERNAL.
-
-2005-02-04 Paul Jakma <paul@dishone.st>
-
- * ripd.c: Untangle the construction of RIP auth data.
- (rip_auth_prepare_str_send) new helper function, prepare
- correct key string.
- (rip_auth_simple_write) new helper, write out the
- rip simple password auth psuedo-RTE.
- (rip_auth_md5_ah_write) new helper, write out the
- MD5 auth-header psuedo-RTE.
- (rip_auth_header_write) new helper, write out correct
- auth header data / psuedo-RTE.
- (rip_auth_md5_set) rip out the memmove and writing of the
- auth header psuedo-RTE. So that all that is left is to
- write the trailing auth digest, and update digest offset
- field in the original header.
- (rip_write_rte) rip out writing of RIP header, writing of
- simple auth data psuedo-RTE. Make it do what its name suggests,
- write out actual RTEs.
- (rip_output_process) remove the incorrect additional decrements
- of rtemax. Prepare the auth_str, which simple or MD5 auth will
- need. Move write out of RIP header and auth data to inside the
- loop. Adjust paramaters as required.
-
-2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_create_socket) Replace perror with zlog_err.
-
-2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_create_socket) Save errno before calling
- ripd_privs.change.
-
-2005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
-
-2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ripd.c: (rip_read) Improve 2 error messages to show the source of
- the packet when the lookup fails.
-
-2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * *.c: Change level of debug messages to LOG_DEBUG.
-
-2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_main.c: (main) The 2nd argument to openzlog has been removed.
-
-2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * rip_main.c: (sigint) Use zlog_notice for termination message.
- (main) Add a startup announcement using zlog_notice.
-
-2004-11-25 Hasso Tepper <hasso at quagga.net>
-
- * rip_main.c: Make group to run as configurable.
-
-2004-10-22 Paul Jakma <paul@dishone.st>
-
- * ripd.c: Collapse redundant passing of various address structs,
- struct interface and struct connected as arguments to functions
- down to two key arguments, namely struct connected and, possibly,
- address of source/destination. Testing for RIPv1 would be useful.
- (rip_read) lookup struct connected for the received packet, pass
- it on.
- * rip_interface.c: With previous changes, we no longer have to tread
- carefully with struct connected, as it will always be there and
- valid.
-
-2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com>
-
- * ripd.c: (rip_update_interface) if connected->destination is NULL,
- get the broadcast address with ipv4_broadcast_addr()
- * rip_interface.c: (rip_interface_multicast_set)
- connected->destination may be NULL. Improve message if
- setsockopt_multicast_ipv4 fails. Improve message if bind fails.
- (rip_request_interface_send) If connected->destination is NULL,
- get the broadcast address with ipv4_broadcast_addr().
- (if_valid_neighbor) Handle PtP subnet addressing properly.
- Speed up code by using prefix_match properly.
-
-2004-10-13 Hasso Tepper <hasso at quagga.net>
-
- * ripd_snmp.c: Remove defaults used to initialize smux connection to
- snmpd. Connection is initialized only if smux peer is configured.
-
-2004-10-11 Hasso Tepper <hasso at quagga.net>
-
- * *.c: Make more strings const.
-
-2004-10-08 Hasso Tepper <hasso at quagga.net>
-
- * *.c: Fix compiler warnings: make strings const, signed -> unsigned
- etc.
-
-2004-09-26 Hasso Tepper <hasso at quagga.net>
-
- * ripd.c: Fix compiler warning.
-
-2004-09-23 Hasso Tepper <hasso at quagga.net>
-
- * *.[c|h]: list -> struct list *, listnode -> struct listnode *.
-
-2004-09-17 Paul Jakma <paul@dishone.st>
-
- * ripd.c: set receive buffer to a decent size, some systems have low
- defaults. Problem noted and fix suggested by Stephan Schweizer
- in [zebra 20967].
-
-2004-08-19 Paul Jakma <paul@dishone.st>
-
- * rip_interface.c: (rip_interface_multicast_set) get rid
- of extraneous if_pointopoint arg. ifp is accessible via connected.
- pass connected->ifp->ifindex to setsockopt_multicast_ipv4.
- * ripd.c: (rip_send_packet) update call to
- rip_interface_multicast_set
- * ripd.h: update rip_interface_multicast_set prototype
-
-2004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com>
-
- * ripd.c: (rip_distribute_update_all) distribute list hook
- function pointer prototype requires struct prefix_list * arg.
- (rip_distribute_update_all_wrapper) update to pass required arg,
- NULL.
-
-2004-06-06 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.h: Add define for the RIPv2 Authentication Data family
- Move the auth type defines up to where other defines live.
- Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible
- md5->auth_len size. Add md5_auth_len field to struct
- rip_interface: (rip_interface_new) Init md5_auth_len to compatible
- size.
- (ip_rip_authentication_mode_cmd) Extended to handle setting
- md5 auth-length. Appropriate aliases added.
- (no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to
- compatible size.
- (rip_interface_config_write) Teach it about md5_auth_len.
- _always_ write out the auth-length, so that everyone will get
- the setting in their config file, and hence allow for a future
- change of default for md5_auth_len to be less painful - every md5
- user will have this setting in their config file.
- ripd.c: (rip_packet_dump) Change nasty hard coded constants to
- symbolic defines. Change various tests of 'ntoh.(variable) ==
- constant' to test 'variable == ntoh.(constant)'. Clean up
- indentation on some long lines.
- (rip_auth_simple_password) ditto.
- (rip_auth_md5) ditto, also add length argument and sanity check
- md5 data offset field. Sanity check md5 auth length, accept RFC
- or old-ripd/cisco lengths.
- (rip_auth_md5_set) as per (rip_packet_dump), also write out
- the configured md5 auth length for the interface (old-ripd or rfc)
- (rip_read) as per (rip_packet_dump)
- (rip_write_rte) ditto
- (rip_response_process) ditto
- (rip_write_rte) ditto
-
-2004-06-04 JJ Ludman <jacques.ludman@sun.com>
-
- * ripd.c: Interoperability fix. Correct value for MD5 auth length
- is 16. Accept packets with this set to >= 16, and set to 16
- ourselves.
-
-2004-05-31 Sowmini Varadhan <sowmini.varadhan@sun.com>
-
- * ripd.c: Fixup compile warnings
- * rip_routemap.c: Ditto
-
-2004-05-08 Paul Jakma <paul@dishone.st>
-
- * rip_zebra.c: sync with zclient changes.
- * rip_interface.c: ditto.
-
-2004-05-05 Anthony.Golia@morganstanley.com
-
- * ripd.c: (rip_update_jitter) Bound jitter to a more sensible
- value, eg 1/4 of update time.
-
-2004-05-03 Paul Jakma <paul@dishone.st>
-
- * ripd.c: (rip_rte_process) fix typo in merge of previous patch
- and run function through indent.
-
-2004-03-19 Jean-Yves Simon <lethalwp@tiscali.be>
-
- * ripd.c: (rip_rte_process) make ripd also check on
- administrative distance of his own links to update routes.
-
-2004-03-18 sowmini.varadhan@sun.com
-
- * ripd.c: rip_send_packet can get null connected address when
- called in response to a unicast rip-request. Handle correctly.
-
-2004-03-03 Krzysztof Oledzki <oleq@ans.pl>
-
- * ripd.c: fix "show ip rip" and per interface rip version selection.
-
-2004-01-23 sowmini.varadhan@sun.com
-
- * rip_interface.c: obsolete unbind code in
- rip_interface_multicast_set, and instead do the more portable
- (though slower) method of creating a socket for each outgoing packet
- and binding the source address on the new socket.
- * rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that
- source address is determined by the caller of rip_request_send for
- ripv1 packets and non-multicast interfaces (rip_request_send loops
- over all connected address in all other cases).
- * rip_send_packet: don't send packets with source set to
- ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;
-
-2003-06-07 Andrew J. Schorr <aschorr@telemetry-investments.com>
-
- * Allow ripd to receive RIPv1
- * add default as valid param to passive-interface command
-
-2003-05-25 Vincent Jardin <vjardin@wanadoo.fr>
-
- * 6Wind patch merge.
-
-2003-04-19 Hasso Tepper <hasso@estpak.ee>
-
- * rip_routemap.c: sync daemon's route-map commands to have same
- syntax
-
-2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
-
- * zebra-0.93 released.
-
-2002-06-30 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
-
- * ripd.c (rip_output_process): When outgoing interface is same as
- next hop interface, announce RIPv2 next hop otherwise set next hop
- to 0. Revert previous change then take 6WIND way.
-
-2001-09-14 Akihiro Mizutani <mizutani@dml.com>
-
- * ripd.c: RIP enabled interface's route is advertised by default.
-
-2001-08-28 NOGUCHI Kay <kay@v6.access.co.jp>
-
- * rip_snmp.c (rip_ifaddr_delete): Add route_node_lookup() return
- value check.
-
- * rip_interface.c (rip_multicast_leave): Fix bug of multiple IP
- address on one interface multicast join/leave bug.
-
-2001-08-26 NOGUCHI Kay <kay@v6.access.co.jp>
-
- * rip_interface.c (no_rip_passive_interface): Add NO_STR.
-
-2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
-
- * zebra-0.92a released.
-
-2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
-
- * zebra-0.92 released.
-
-2001-06-17 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_routemap.c (route_match_ip_address_prefix_list): Add match
- ip next-hop prefix-list WORD.
-
-2001-02-18 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (rip_passive_interface_clean): Call
- rip_passive_interface_apply_all.
-
-2001-02-12 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_response_process): Multicast address nexthop check
- is moved from rip_nexthop_check.
-
-2001-02-08 Matthew Grant <grantma@anathoth.gen.nz>
-
- * rip_interface.c (ipv4_multicast_join): Use
- setsockopt_multicast_ipv4.
- (ipv4_multicast_leave): Likewise.
- (rip_if_ipv4_address_check): Interface which has IPv4 address can
- be enabled.
-
-2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (rip_interface_delete): To support pseudo
- interface do not free interface structure.
- * ripd.c (rip_output_process): If output interface is in simple
- password authentication mode, we need space for authentication
- data.
-
-2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_nexthop_check): Fix multicast address nexthop check.
-
- * zebra-0.91 is released.
-
-2001-01-27 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (show_ip_rip): Show metric infinity route's timeout.
- (rip_rte_process): If current route is metric infinity, route is
- replaced with received rte.
- (rip_redistribute_delete): When redistribute route is deleted,
- perform poisoned reverse.
- (rip_redistribute_withdraw): Likewise.
-
-2001-01-25 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_response_process): RIPv2 routing table entry with
- non directly reachable nexthop was dropped. The code is changed
- to treat it as 0.0.0.0 nexthop.
- (rip_destination_check): Check net 0 address destination.
- (rip_nexthop_check): New function for checking nexthop address
- validity.
-
-2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_request_process): Triggered update only send changed
- route.
-
- * rip_interface.c: Delete RIP_API part until new implementation
- comes out.
-
- * rip_snmp.: Likewise.
-
- * rip_zebra.c: Likewise.
-
- * ripd.c: Likewise.
-
-2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (rip_if_init): Remove HAVE_IF_PSEUDO part.
-
-2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra-0.90 is released.
-
-2001-01-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.h (RIP_VTYSH_PATH): Change "/tmp/ripd" to "/tmp/.ripd".
-
-2000-12-25 David Lipovkov <davidl@nbase.co.il>
-
- * ripd.c (rip_rte_process): When a route is in garbage collection
- process (invalid with metric 16) and a router receives the same
- route with valid metric then route was not installed into zebra
- rib, but only into ripd rib. Moreover , it will never get into
- zebra rib, because ripd wrongly assumes it's already there.
- (rip_redistribute_add): When doing redistribute into rip other
- route (e.g. connected) and the same route exists in ripd rib we
- changed it in place - bug. Now we don't forget to remove old route
- from zebra.
- (rip_timeout): When removing routes from zebra I made sure that we
- remove route with the metric we have in zebra and not the new
- one. It doesn't make a difference now,but could be significant
- when multipath support is done.
-
-2000-12-25 David Lipovkov <davidl@nbase.co.il>
-
- * rip_zebra.c (rip_metric_unset): Fix bug of metric value unset.
-
-2000-11-25 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
- * ripd.c (rip_request_process): Check passive flag of the
- interface.
-
-2000-11-23 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
- * rip_interface.c (rip_multicast_join): When IP_ADD_MEMBERSHIP
- failed do not set runnning flag to the interface.
-
-2000-11-16 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_output_process): Memory leak related classfull
- network generation is fixed.
-
-2000-11-16 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
- * rip_interface.c (if_check_address): Obsolete pointopoint address
- check is removed.
-
-2000-11-02 Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
- * rip_interface.c (if_check_address): Add pointopoint address
- check.
- (rip_interface_up): Add check for passive interface when interface
- goes up.
-
-2000-10-23 Jochen Friedrich <jochen@scram.de>
-
- * rip_snmp.c: rip_oid and ripd_oid are used in smux_open after it
- is registered. So those variables must be static.
-
-2000-10-19 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c: Change to "no ip rip (send|receive)" command
- accept version number argument.
-
-2000-10-17 Akihiro Mizutani <mizutani@dml.com>
-
- * rip_routemap.c (route_set_ip_nexthop_compile): Change "match ip
- next-hop" from IP address to access-list name.
-
-2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_peer.c: Change ot use linklist.c instaed of newlist.c.
-
-2000-10-16 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_offset.c: Change to use linklist.c instead of newlist.c.
-
-2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra-0.89 is released.
-
-2000-09-26 Akihiro Mizutani <mizutani@dml.com>
-
- * rip_routemap.c (match_ip_nexthop): Add next-hop format check.
-
-2000-09-18 David Lipovkov <dlipovkov@OpticalAccess.com>
-
- * rip_interface.c (ripd_api_get_if_rx_version): Corrects rip SNMP
- and rip API functions dealing with rip version.
-
- * rip_snmp.c (Status_Valid): SNMPv2-TC TEXTUAL-CONVENTION.
-
-2000-09-10 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_snmp.c (rip2IfLookup): Use rip_ifaddr_lookup_next() instead
- of rip_if_lookup_next().
-
- * rip_interface.c (rip_enable_network_lookup): Interface enable
- check by interface's address with /32 prefix.
-
- * ripd.c (rip_read): When RIP is configured with authentication
- and no authentication in incoming packet, drop the packet.
-
- * rip_interface.c (rip_interface_reset): RIP_AUTH_SIMPLE_PASSWORD
- is default mode of authentication.
- (rip_interface_new): Likewise.
- (no_ip_rip_authentication_mode): Likewise.
-
- * ripd.c (rip_read): Likewise.
-
-2000-09-10 David Lipovkov <davidl@nbase.co.il>
-
- * rip_snmp.c: Set ASN_INTEGER v->type where it is needed.
-
-2000-09-08 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_auth_simple_password): Simple password
- authentication using key-chain.
- (rip_write_rte): Likewise.
-
- * rip_interface.c (ip_rip_authentication_key_chain): Add check for
- authentication string configuration.
-
-2000-09-08 Akihiro Mizutani <mizutani@dml.com>
-
- * ripd.c (rip_write_rte): Add check for ri->auth_str.
-
-2000-09-07 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd_api.h: New file is added.
-
-2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_rte_process): rip_route_process() is renamed to
- rip_rte_process() to clarify meanings of the function.
- rip_route_process() is newly added to process RIP route selection.
-
-2000-08-18 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_incoming_filter): Extract incoming filter code to
- function from rip_route_process(). Add check for all interface
- filter.
- (rip_outgoing_filter): Extract incoming filter code to function
- from rip_output_process(). Add check for all interface filter.
-
- * rip_zebra.c (rip_redistribute_clean): Reset redistribute status
- when "no router rip" is performed.
-
- * rip_interface.c (rip_interface_clean): Reset interface's RIP
- enable status.
-
-2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_route_process): When metric infinity is received the
- route is removed from service immediately.
- (rip_timeout): Likewise.
- (rip_garbage_collect): Do not delete route in garbage collection.
- (rip_output_process): Check metric_out exceed metric infinity.
-
- * zebra-0.88 is released.
-
-2000-08-15 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_distance_apply): Unlock node when there is matched
- node.
-
-2000-08-13 Akihiro Mizutani <mizutani@dml.com>
-
- * rip_routemap.c (match_ip_nexthop): Add check for IP address
- validness.
- (no_set_metric): Add new ALIAS.
-
-2000-08-07 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.h (struct rip ): Add distance.
-
-2000-08-05 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_zebra.c (rip_zebra_ipv4_add): Use new Zebra api to register
- routes. Pass RIP metric value to zebra.
-
-2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_main.c (main): Make struct thread thread from global
- variable to local variable in main.
-
-2000-08-06 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_packet_dump): Add MD5 authentication dump function.
- (rip_auth_md5): RIP MD5 authentication packet receive works.
-
-2000-08-02 David Lipovkov <davidl@nbase.co.il>
-
- * rip_interface.c (rip_if_init): Install interface "pseudo"
- commands.
- (rip_interface_delete): Do not call if_delete() when interface is
- pseudo interface.
-
-2000-07-31 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (ip_rip_authentication_mode): "ip rip
- authentication mode (md5|text)" is added.
- (ip_rip_authentication_key_chain): "ip rip authentication
- key-chain KEY-CHAIN" is added.
- (rip_interface_clean): Clean all interface configuration.
- (rip_interface_reset): Reset all interface configuration.
- (rip_clean_network): Clean rip_enable_network.
-
- * ripd.h (struct rip_interface): Add key_chain member.
-
- * ripd.c: Include md5-gnu.h.
-
-2000-07-30 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.h (RIP_NO_AUTH): Change RIP_NO_AUTH value from 1 to 0.
-
- * ripd.c (rip_authentication): Use RIP_AUTH_SIMPLE_PASSWORD
- instead of raw value 2.
- (rip_write_rte): Likewise.
- (rip_write_rte): Check ri->auth_type instead of ri->auth_str.
-
-2000-07-30 David Lipovkov <davidl@nbase.co.il>
-
- * rip_interface.c (rip_if_down): Do not delete ZEBRA_ROUTE_KERNEL
- route.
-
-2000-07-27 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_update_process): Add "passive-interface" command.
-
- * ripd.h (struct rip_interface): Add passive member to struct
- rip_interface.
-
-2000-07-24 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (rip_if_init): Multiple RIP routes for one
- prefix change. The codes are enclosed by #ifdef NEW_RIP_TABLE.
-
-2000-07-24 Akihiro Mizutani <mizutani@dml.com>
-
- * rip_interface.c (rip_if_init): Use install_default() for
- INTERFACE_NODE.
-
-2000-07-24 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c: First update timer will be invoked in two seconds.
-
-2000-07-09 Jochen Friedrich <jochen@scram.de>
-
- * rip_snmp.c: Local function definitions to static. Add INTEGER
- ASN_INTEGER and TIMETICKS ASN_TIMETICKS definition.
- (rip2PeerLookup): Peer with domain lookup implemented.
- (rip2PeerTable): Temporary disable RIP2PEERLASTUPDATE value
- support due to unknown SNMP agent startup time.
-
-2000-07-05 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.h: Sweep obsolete definitions.
-
- * rip_interface.c (rip_split_horizon): Add "ip split-horizon"
- command.
-
- * ripd.c (rip_output_process): Remove split_horizon argument.
- (rip_update_process): Likewise.
-
- * ripd.h (struct rip_interface): Add split_horizon flag to struct
- rip_interface.
-
-2000-07-04 Akihiro Mizutani <mizutani@dml.com>
-
- * ripd.c (rip_version): Change VERSION to <1-2>.
- Add "no version" command.
-
-2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_zebra.c (rip_redistribute_type_metric): "redistribute TYPE
- metric <0-16>" command is added.
-
- * rip_routemap.c (route_set_metric): Set metric_set when metric is
- modified.
-
- * ripd.h (struct rip_info): To check route-map set metric or not,
- new member metric_set is added to struct rip_info.
-
- * ripd.c (rip_route_process): Move metric handling code from
- rip_response_process() to rip_route_process().
- (rip_output_process): Set output offset-list metric.
-
-2000-07-02 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_offset.c (rip_offset_list): New file for offset-list.
-
-2000-07-02 Akihiro Mizutani <mizutani@dml.com>
-
- * ripd.h (struct rip ): Add default_metric.
-
- * ripd.c (rip_default_metric): "default-metric <1-16>" command is
- added.
- (config_write_rip): Change configuration order.
-
- * rip_zebra.c: Fix help strings.
-
-2000-07-02 David Lipovkov <davidl@nbase.co.il>
-
- * rip_interface.c (rip_if_init): Add IF_DELETE_HOOK.
-
-2000-07-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_output_process): If specified route-map does not
- exist, it treated as deny all.
-
-2000-06-30 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_routemap.c (rip_route_map_init): Call rip_route_map_update
- when route-map is deleted.
-
-2000-06-28 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_routemap.c (set_metric): For consistency with bgpd's set
- metric, value range is set to <0-4294967295>.
-
-2000-06-28 David Lipovkov <davidl@nbase.co.il>
-
- * rip_routemap.c (rip_route_map_update): Add check for rip is
- enabled or not for avoid core dump.
-
- * rip_debug.c (debug_rip_packet_direct): Fix bug of setting
- rip_debug_packet flag.
-
-2000-06-13 David Lipovkov <davidl@nbase.co.il>
-
- * rip_interface.c (rip_interface_delete): All work is done in
- rip_if_down().
-
-2000-06-06 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_redistribute_delete): Fix bug of missing
- route_unlock_node() when redistribute route is not found.
-
-2000-06-05 Akihirof Mizutani <mizutani@dml.com>
-
- * rip_debug.c (rip_debug_init): Disable show debugging in
- VIEW_NODE like other protocol daemon.
-
- * rip_routemap.c: Change command argument to more comprehensive.
-
- METRIC -> <0-16>
- IFNAME -> WORD
- IP_ADDR -> A.B.C.D
- ACCSESS_LIST -> WORD
-
-2000-06-05 David Lipovkov <davidl@nbase.co.il>
-
- * rip_interface.c (rip_interface_delete): Delete all routes
- include static and kernel through the interface , because even if
- the interface is added again there is no guarantee that it will
- get the same ifindex as before.
-
-2000-05-31 Akihirof Mizutani <mizutani@dml.com>
-
- * rip_debug.c: Fix rip debug help string.
-
-2000-04-27 Mirko Karanovic <mkaranov@torsel.alcatel.com>
-
- * rip_interface.c (rip_interface_down): Remove interface from
- multicast group when interface goes down.
-
-2000-04-03 David Lipovkov <davidl@nbase.co.il>
-
- * rip_interface.c (rip_interface_down): Implemented rip functions
- for interface up/down events: rip_interface_up() and
- rip_interface_down()
-
-2000-03-16 David Lipovkov <davidl@nbase.co.il>
-
- * rip_zebra.c (rip_zclient_init): Added rip functions for
- interface up/down events.
-
-2000-02-15 Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
-
- * ripd.c (rip_write_rte): "set metic" in route-map has no effect
- for RIPv1 in ripd. It worked fine for RIPv2.
-
-2000-01-17 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (show_ip_protocols_rip): Fix bug of "show ip protocls"
- mis-display RIP version.
-
- * ripd.h (struct rip_peer): Add timeout thread to rip_peer
- structure.
-
-2000-01-16 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_peer.c: Add new file for supporting RIP peer.
-
-1999-12-26 David Lipovkov <davidl@nbase.co.il>
-
- * ripd.c (rip_authentication): RIP authantication string is 16
- bytes long.
-
-1999-12-10 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_read): Add check for minimum packet length.
- Authentication check is moved from rip_process_response() to
- rip_read(). Patch from David Lipovkov <davidl@nbase.co.il> is
- applied then add rte number check by Kunihiro Ishiguro
- <kunihiro@zebra.org>.
-
-1999-12-07 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_response_process): In case of packet is RIPv2 and
- network is non zero and netmask is zero, apply netmask rule as
- same as RIPv1.
-
-1999-11-06 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_timers): Fix bug of timers basic argument format.
-
-1999-11-03 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_snmp.c (rip2IfConfAddress): Forgot to include
- RIP2IFCONFDOMAIN.
-
-1999-10-28 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.h (struct rip_peer): New structure added.
-
-1999-10-26 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_zebra.c (rip_zebra_ipv4_add): Increment
- rip_global_route_changes when route change occur.
- (rip_zebra_ipv4_delete): Likewise.
-
- * ripd.c (rip_request_process): Increment rip_global_queries when
- reply to the query is sent.
-
-1999-10-25 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_debug.c (rip_debug_reset): Reset function added.
-
- * ripd.c (rip_update_process): Logging bug is fixed.
-
-1999-10-10 Marc Boucher <marc@mbsi.ca>
-
- * ripd.c (config_write_rip): Add config_write_distribute() call.
-
-1999-09-29 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_distribute_update): Fix bug of access-list
- prefix-list updates.
-
-1999-09-10 VOP <vop@unity.net>
-
- * rip_zebra.c: Add redistribute route-map feature.
-
-1999-09-10 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_response_process): Add check for given prefix is
- given mask applied one.
-
-1999-09-03 VOP <vop@unity.net>
-
- * rip_interface.c (rip_interface_multicast_set): Bug fix about
- setting multicast interface.
-
-1999-09-02 VOP <vop@unity.net>
-
- * rip_routemap.c: New file added.
-
-1999-09-02 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (show_ip_protocols_rip): Show next update time.
- (show_ip_protocols_rip): Show redistribute information.
-
-1999-08-25 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * RIPv2-MIB.txt: New file added.
-
- * rip_snmp.c: New file added.
-
-1999-08-24 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (ip_rip_authentication_string): RIPv2
- authentication command is added.
-
-1999-08-23 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (rip_interface_multicast_set): Process of
- setting IP_MULTICAST_IF on specific interface.
-
- * ripd.c (rip_read): Add packet size check.
-
-1999-08-16 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_request_process): Fill in RIP_METRIC_INFINITY with
- network byte order using htonl ().
- (rip_response_process): Pass host byte order address to IN_CLASSC
- and IN_CLASSB macro.
-
-1999-08-08 davidm@nbase.co.il (David Mozes)
-
- * rip_zebra.c (rip_zebra_read_ipv4): Fix split horizon problem.
-
-1999-07-03 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_timer_set): Function added.
-
-1999-07-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_debug.c: New file added.
- rip_debug.h: New file added.
-
-1999-07-01 Rick Payne <rickp@rossfell.co.uk>
-
- * rip_zebra.c (zebra_init): Install standard commands to
- ZEBRA_NODE.
-
-1999-06-01 David Luyer <luyer@ucs.uwa.edu.au>
-
- * ripd.c (rip_process_route): Add support for RIP version 1.
-
-1999-05-29 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_zebra.c: Change to use lib/zclient.[ch].
-
-1999-05-20 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
- * ripd.c (rip_add_route): Change the existance route's metric check
- to the condition specified by RFC2453.
-
-1999-05-17 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
- * ripd.c (rip_process_route): Add the if metric to the route metric.
-
- * ripd.c (rip_add_route): Deleted add if metric to the route.
-
-1999-05-16 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
- * rip_interface.c (if_valid_neighbor): New function.
-
- * ripd.c (rip_process_route): Added check whether the datagram
- is from a valid neighbor.
-
-1999-05-15 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_process_route): Set interface pointer to rinfo.
-
-1999-05-15 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
- * ripd.c (rip_check_address): Unicast and not net 0 or 127 check
- added.
-
-1999-05-14 Stephen R. van den Berg <srb@cuci.nl>
-
- * rip_main.c (signal_init): SIGTERM call sigint.
- (sigint): Loggging more better message.
-
-1999-05-10 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_add_route): Fix previous route_unlock_node() chenge.
-
- * rip_main.c (main): Change default zlog output to ZLOG_STDOUT for
- debugging.
-
-1999-05-09 Patrick Koppen <koppen@rhrk.uni-kl.de>
-
- * rip_interface.c (rip_request): Fix old semantics for fetching
- connected address.
-
- * ripd.c (rip_add_route): Update timer when the route is updated.
-
-1999-05-09 Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
- * rip_zebra.c (struct zebra): Add ridist_static, ridist_connect,
- redist_rip, redist_ripng.
-
- * rip_zebra.c (zebra_create): Updated for current zebra method.
-
- * ripd.c (rip_add_route): Add missing route_unlock_node().
-
-1999-05-03 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_add_route): Add metric check. Reported by Carlos
- Alberto Barcenilla <barce@frlp.utn.edu.ar>.
-
-1999-02-18 Peter Galbavy <Peter.Galbavy@knowledge.com>
-
- * syslog support added
-
-1998-12-13 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_announce_func): Apply new lib functions.
-
-1998-12-09 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (config_write_rip): Delete vector v argument.
- * rip_zebra.c (config_write_zebra): Likewise.
- * rip_interface.c (interface_config_write): Likewise.
-
-1998-09-07 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_announce.c (rip_rib_close): When ripd terminates delete all
- added route.
-
-1998-09-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c: return read packet size.
-
-1998-05-18 Yamshita TAKAO <jargon@lares.dti.ne.jp>
-
- * ripd.h: Modify for compile on Solaris.
-
-1998-05-07 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c: DEFUN function return CMD_SUCCESS.
- change xmalloc to XMALLOC macro.
-
-1998-05-03 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_main.c: change CONFDIR to SYSCONFDIR.
-
-1998-05-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * .cvsignore: added.
-
-1998-02-04 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (config_write_interface): correct ADVERTISE spell.
-
- * rip_main.c (main): add usage() and make cleanup.
-
-1998-01-05 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * ripd.c (rip_version): add rip version command.
-
-1998-01-04 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * rip_interface.c (zebra_get_interface): added to get
- interface's information.
-
- * ChangeLog: create.