diff options
Diffstat (limited to 'vtysh/ChangeLog')
| -rw-r--r-- | vtysh/ChangeLog | 500 |
1 files changed, 0 insertions, 500 deletions
diff --git a/vtysh/ChangeLog b/vtysh/ChangeLog deleted file mode 100644 index af55c6f2..00000000 --- a/vtysh/ChangeLog +++ /dev/null @@ -1,500 +0,0 @@ -2008-07-03 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> - - * extract.pl.in: Fix as-range to match CPP output. - * vtysh.c: Add missing router_bgp_view_cmd alias. - -2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> - - * CMD_AS_RANGE was being used inside command strings, and thus - not being expanded, fix by dequoting. - -2007-06-20 Nicolas Deffayet <nicolas@deffayet.com> - - * vtysh.c: (vtysh_write_terminal) Write 'end' when done, - to be consistent with telnet vty, and expected by tools - like rancid. - -2007-05-01 David L Stevens <dlstevens@us.ibm.com> - - * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and - plist - * vtysh/Makefile.am: added zebra_routemap.c - * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP - -2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> - - * vtysh.c: (vtysh_log_timestamp_precision, - no_vtysh_log_timestamp_precision) Implement new log timestamp - precision commands: send to all daemons. - (vtysh_init_vty) Install new log timestamp precision commands. - -2007-02-12 Juergen Kammer <j.kammer@eurodata.de> - * extract.pl: AS4 compatibility for router bgp ASNUMBER - * extract.pl.in: AS4 compatibility for router bgp ASNUMBER - * vtysh.c: AS4 compatibility for router bgp ASNUMBER - -2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> - - * vtysh_main.c: (usage) Add new -d and -E options. And note that - -c can be used multiple times, possibly with embedded linefeeds. - (longopts) Add new -d and -E options. - (main) Add new -d and -E options, and create a linked list to - support multiple -c options. Do not call vtysh_connect_all until - after vtysh_read_config(config_default) and vtysh_auth have - succeeded. This prevents the vtysh.conf file from configuring - any daemons, and it ensures that authentication has been passed - before we send any commands to any daemons. Call vtysh_connect_all - with any daemon name supplied with -d. If it is unable to connect - to any daemons, issue an error message and exit immediately. - When used in -c mode, call vtysh_execute("enable") before - executing the commands in order to match interactive behavior. - And detect embedded linefeed chars in -c commands and break them up - appropriately. - * vtysh.h: (vtysh_connect_all) Fix proto to reflect new - daemon_name argument, and that it now returns an integer -- the - number of daemons to which we were able to connect. - * vtysh.c: (vtysh_connect_all) Add a new daemon_name argument. - If supplied, connect only to that daemon. And return - the number of daemons to which we were able to connect. - (vtysh_prompt): Performance enhancement -- make struct utsname - static so we call uname to get the hostname only once. - -2006-05-24 Paul Jakma <paul.jakma@sun.com> - - * vtysh.c: (general) Add 'show memory' command. - -2006-05-21 Paul Jakma <paul.jakma@sun.com> - - * vtysh.c: (vtysh_show_logging_cmd) Suppress output for daemons - which are not running (Andrew Schorr). - -2006-05-17 Paul Jakma <paul.jakma@sun.com> - - * vtysh.c: (general) Add 'show logging' command. - -2006-01-11 Erik Smit <zoiah@zoiah.net> - - * vtysh.c: (vtysh_config_from_file) fix regression from - a previous cleanup, vtysh_client.flags and cmd->daemon are - bitwise flags, bitwise & was meant to be used. Fixes breakage - of integrated config file reading. - -2005-09-15 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: Fix warning by casting rl_bind_key 2. argument correctly. - * extract.pl.in: Fix warning - add isisd/topology to the includes. - -2005-08-22 Hugo Santos <hsantos@av.it.pt> - - * vtysh.c: Add support for BGP_IPV6M_NODE - -2005-07-12 Christian Hammers <ch@debian.org> - - * vtysh_user.c: rename struct user to struct vtysh_user to avoid - clashes with sys/user.h on Linux/ARM. - -2005-04-07 Hasso Tepper <hasso at quagga.net> - - * Makefile.am: Remove rebuild4 target, it's not used any more by build - procedure. Define vtysh_cmd_FILES. Use EXTRA_DIST. - * extract.pl.in: Ignore "router zebra". - -2005-03-28 Hasso Tepper <hasso at quagga.net> - - * extract.pl.in: Use SNMP_INCLUDES to avoid warnings if compiling with - snmp support. - -2005-03-09 Hasso Tepper <hasso at quagga.net> - - * vtysh_config.c: Move password commands to the AAA_NODE. It - quarantees that they will appear after SERVICE_NODE to make sure - that encrypted passwords will work ("service password-encryption" - command). - -2005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> - - * vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes - for functions with no arguments (must specify argument list as void). - * vtysh.c: Enhance vtysh_client array to include the daemon's name - and bitmask and socket path (in addition to the fd). This allows - us to use loop constructs for various operations that need to be - applied to all client daemons, and it facilitates better error - messages. Also fix some prototypes with void argument lists. - (vclient_close) Issue a warning message indicating which daemon's - socket is being closed. - (vtysh_execute_func,vtysh_config_from_file) Use a for loop to - call vtysh_client_execute. - (vtysh_write_terminal,write_config_integrated) Use a for loop to - call vtysh_client_config. - (vtysh_write_memory) Use a for loop to call vtysh_client_execute. - (vtysh_show_daemons) Use a for loop. - (vtysh_connect) The struct vtysh_client is now statically initialized, - so do not initialize it here. - (vtysh_connect_all) Use a for loop to call vtysh_connect. Set - ripd_client pointer for use in vtysh_exit_ripd_only. - -2005-01-23 Hasso Tepper <hasso at quagga.net> - - * vtysh.conf.sample: Fix typo "integrated-vtysh-conf" -> - "integrated-vtysh-config". - * vtysh/vtysh.c: Implement walkup in node tree for vtysh as it - already works in vty. - -2005-01-10 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: Reflect changes in lib. cmd_execute_command() should know - now that it's called from vtysh and must not attempt to walk up in - the node tree. - -2004-12-22 Hasso Tepper <hasso at quagga.net> - - * vtysh_config.c: No delimiter between "ip forwarding" and "ipv6 - forwarding". Show common router-id before router nodes. Fix router - bgp node parsing. Move debug commands into debug node and no - delimiter between lines there. - -2004-12-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu> - - * vtysh.c: (vtysh_connect) No reason to call geteuid and getegid, - the results were never used. - -2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> - - * vtysh.c: Make several functions static instead of global. - Added several commands to support destination-specific logging levels. - (vtysh_completion) This function is unused, so comment it out. - -2004-11-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> - - * vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing - '\0' chars and command return code. - -2004-10-28 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: "show running-daemons" broke users habits who are using - "sho run" to view running configuration. Changed it to "show - daemons". - -2004-10-20 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: Don't popen pager if command is "exit". Fixes "vtysh screws - up my terminal if I exit" issue. - -2004-10-13 Hasso Tepper <hasso at quagga.net> - - * extract.pl.in: All daemons can use both IPv6 and IPv4 access lists - to limit access to vty. - -2004-10-11 Paul Jakma <paul@dishone.st> - - * vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and - final sync byte is not ASCII NULL, it's actually a status integer, - and only ASCII NULL if CMD_SUCCESS is returned by daemon. - Fix pointed out by Hasso. - -2004-10-11 Hasso Tepper <hasso at quagga.net> - - * vtysh.c, vtysh_user.c: Make more strings const. - -2004-10-07 Hasso Tepper <hasso at quagga.net> - - * vtysh.c, vtysh.h, vtysh_config.c, vtysh_main.c: Fix compiler - warnings: make strings const, signed -> unsigned, remove unused - variables. - * vtysh_config.c: Fix crash introduced with previous patch. - -2004-10-03 Hasso Tepper <hasso at quagga.net> - - * vtsyh_main.c: Enter into enable node by default. Disable node doesn't - make sense if we don't have any authentication for enable. - * vtysh.c: Implement "show running-daemons" command. - * vtysh.c: Use either integrated conf or daemon conf not both. Move - configuration command into "service" level. - * vtysh.c: Remove "write ..." commands from other nodes than enable. - We have "do ..." extension for that. - * vtysh_config.c, vtysh.c: Integrate vtysh configuration into - integrated one. - * vtysh_config.c: Use FORWARD_NODE and SERVICE_NODE vty nodes. - * vtysh_config.c: Make "service" lines unique in integrated config. - * vtysh.c: Make "service password-encryption" command work in vtysh. - * vtysh_config.c, vtysh.c, Makefile.am, extract.pl.in: Introduce line - vty commands in vtysh. Parse lib/vty.c for commands, but ignore - commands that don't make sense in vtysh. Closes Bugzilla #104. - * vtysh.c: Make "[enable] password" commands work in vtysh. Behavior - is similar to "log" commands - vtysh just passes commands to all - daemons. - * vtysh_main.c, vtysh_config.c, vtysh.h: Remove any code dealing with - configuration files specified from command line. We read/write files - from/to system location only (ie. remove -f again). - * Makefile.am: Parse zebra/router-id.c. - -2004-09-26 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: Fix compiler warning. - -2004-09-17 Paul Jakma <paul@dishone.st> - - * vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily - split across reads, dont get confused by this and block forever. - -2004-09-13 Paul Jakma <paul@dishone.st> - - * Makefile.am: extract.pl isnt in srcdir, it's always in the builddir. - remove zebra/irdp.c from list - dead. - * extract.pl.in: match on end of filenames, filename could contain - various preamble due to out of tree builds. Substitute in the - autoconf srcdir/builddir paths for includes to cpp. - -2004-08-28 Hasso Tepper <hasso at quagga.net> - - * vtysh_main.c: Rename signal handling functions not to conflict - with functions from lib/sigevent.c. - -2004-08-27 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: Make "terminal length <0-512>" command work in vtysh. - -2004-08-27 Hasso Tepper <hasso at quagga.net> - - * vtysh.c: Enable using ssh from ENABLE_NODE. - * vtysh_config.c: Make enable password uniq lines appear only once in - configuration. - * vtysh_main.c, vtysh_config.c, vtysh.h: Remove useless code which - searched configuration files from current directory. Add -f to - specify conf from command line. - -2004-08-26 Hasso Tepper <hasso at quagga.net> - - * *.c: Cosmetical changes - strip long lines, fix multiline comments - style, indentation fixes, remove useless comments. - * vtysh.h: define VTYSH_INTERFACE. - * vtysh.c: Use VTYSH_INTERFACE where possible. Added some related TODO - items. - * vtysh.c: Move things around a little to reduce spaghetti mess. - * Makefile.am: Parse only needed files from zebra daemon while - building vtysh_cmd.c file to supress warnings. - -2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> - - * extract.pl.in: Rename from extract.pl, with @PERL@. - - * Makefile.am: Add vtysh_cmds.c to CLEANFILES. - -2004-06-20 Hasso Tepper <hasso@estpak.ee> - - * extract.pl: Zebra daemon has access lists as well. - -2004-05-10 Hasso Tepper <hasso@estpak.ee> - - * vtysh.c: Workaround for most hated vtysh bug - Bugzilla #58. - -2004-04-06 Hasso Tepper <hasso@estpak.ee> - - * vtysh_main.c: Don't save command to history if last command already - there is same. - * vtysh_main.c: Replace -e with -c. - * vtysh_main.c: Fix help. - -2004-03-04 Hasso Tepper <hasso@estpak.ee> - - * vtysh.c: Remove using PAGER. - -2004-01-15 Paul Jakma <paul@dishone.st> - - * vtysh_config.c: Fix up strlen to use correct string. - -2003-12-23 Hasso Tepper <hasso@estpak.ee> - - * Makefile.am extract.pl vtysh.c vtysh.h vtysh_config.c: - isisd integration to vtysh. - -2003-05-01 Sergiy Vyshnevetskiy <serg@vostok.net> - - vtysh.c: Program shouldn't terminate on pager execution failure - vtysh_user.c: configure support for openpam (freebsd5.0) - -2003-04-19 Hasso Tepper <hasso@estpak.ee> - - * extract.pl vtysh.c vtysh.h: sync daemon's route-map commands to - have same syntax - -2002-09-30 Paul Jakma <paulzebra@rs250.org> - - * vtysh.c: add 'write-config (integrated|daemon)' option - to specifiy whether write config commands should write - integrated Zebra.conf file and/or per daemon files. - Defaults to per daemon, unless this is turned off. - -2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> - - * zebra-0.93 released. - -2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> - - * zebra-0.92a released. - -2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> - - * zebra-0.92 released. - -2001-02-20 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (vtysh_client_config): Do not set bufsz to 120. - Suggested by: Matthew Grant <grantma@anathoth.gen.nz>. - -2001-02-15 Hideto Yamakawa <yamakawa@dml.com> - - * vtysh.c (vtysh_client_execute): Call fflush after fprintf. - - * vtysh_config.c (vtysh_config_dump): Use VTYSH_PAGER if defined. - -2001-02-14 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (vtysh_execute_func): Add fflush before pclose. - -2001-02-10 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c: VTY shell pager name. When environment variable - VTYSH_PAGER is defined, use it as VTY shell pager. - -2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (vtysh_execute_func): Add pager argument for test of - pager invocation. - -2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> - - * extract.pl: Add -DHAVE_CONFIG_H option to cpp. - -2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> - - * vtysh.c (vtysh_client_config): Use sysconf to determine output - buffer size. - (vtysh_write_memory): Set umask 0077. - (vtysh_connect): Check permission to the socket. - -2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> - - * zebra-0.91 is released. - -2001-01-31 Michael Rozhavsky <mrozhavsky@opticalaccess.com> - - * vtysh.c (new_completion): Fix problem of appending space when - completion is executed. - -2001-01-23 Akihiro Mizutani <mizutani@dml.com> - - * vtysh.c (vtysh_write_terminal): "write terminal" to all node. - -2001-01-15 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (vtysh_execute): Fix unconditional lock by other VTY. - Suggested by Hideto Yamakawa <yamakawa@dml.com>. - -2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> - - * zebra-0.90 is released. - -2001-01-07 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.h (ZEBRA_PATH): Fix new vtysh path. Reported by "Matt - Ranney" <mjr@ranney.com> - -2000-11-06 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (DEFUNSH): Add "address-family vpnv4" DEFUNSH. - -2000-10-23 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (execute_command): Add two arguemnt support for - executing child process. - (vtysh_telnet_port): New command "telnet WORD PORT" is added. - -2000-10-23 Akihiro Mizutani <mizutani@dml.com> - - * vtysh.c (vtysh_write_memory): Display [OK] when configuration is - saved without problem. - -2000-10-20 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (vtysh_config_from_file): "key chain" command with -b - flag problem is fixed. - -2000-10-17 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh_user.c: Change to use linklist.c. - -2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org> - - * Makefile.am (noinst_HEADERS): Add vtysh_user.h. - - * zebra-0.89 is released. - -2000-09-22 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh_main.c: Declare thread master. - -2000-08-25 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh_main.c (main): Add missing --help procudure. Reported by - Patrick Rother <krd@roka.net>. - -2000-08-22 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (DEFUNSH): "interface IFNAME" works. - -2000-08-20 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh_user.c: Change name from vtysh_pam.c. - - * vtysh.conf.sample: New file for vtysh configuration. - -2000-08-19 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh_pam.c (vtysh_pam): New file for PAM. - -2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org> - - * zebra-0.88 is released. - -2000-08-02 Kunihiro Ishiguro <kunihiro@zebra.org> - - * Makefile.am (vtysh_LDADD): Remove -lreadline and -lncurses. - - * vtysh.c (vtysh_connect): Use AF_UNIX instead of AF_LOCAL for - backward compatibility. - -2000-07-09 Kunihiro Ishiguro <kunihiro@zebra.org> - - * extract.pl: Change regexp to match DEFUN and ALIAS at the same - time. - -2000-07-05 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (signal_init): Ignore SIGPIPE signal. - -2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org> - - * extract.pl: ALIAS command can be extracted by extract.pl. - -2000-07-03 Kunihiro Ishiguro <kunihiro@zebra.org> - - * extract.pl: Fix scalar and array semantics. - - * vtysh.c (vtysh_telnet): Add "telnet" client command. - -2000-07-02 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c (main): Add -e flag for passing command from arugment. - (vtysh_ping): Add "ping" command for test of command execution. - (init_node): Add "traceroute" command. - (vtysh_start_shell): Add "start-shell", "start-shell bash", - "start-shell zsh". - (sigint): Add check for execute_flag for avoid duplicate prompt. - -2000-06-28 Kunihiro Ishiguro <kunihiro@zebra.org> - - * vtysh.c: New file for vty shell. - * vtysh.h: Likewise. - * extract.pl: Likewise. - * vtysh_cmd.c: Generate by extract.pl. |