summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-04-27[ripd, ripngd] Remove useless code in rip_vty_out_uptime functionAndrew J. Schorr
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now. * ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable timer_now.
2007-04-21[ospfd] Fix bug in 'passive-interface default' behaviorAndrew J. Schorr
2007-04-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.c: (ospf_if_set_multicast) Fix bug: was testing interface passive status improperly in light of the recent 'passive-interface default' patch. Now need to test OSPF_IF_PASSIVE_STATUS(oi) instead of OSPF_IF_PARAM(oi, passive_interface).
2007-04-16Use 'path (category)' form.David Young
2007-04-16Note my change to zebra/connected.c.David Young
2007-04-16Only suppress adding a connected route to the kernel if it isDavid Young
already marked "real" (ZEBRA_IFC_REAL), i.e., "in kernel." According to Paul Jakma, this probably fixes Quagga bug #202.
2007-04-15[bgpd] Minor performance improvement patchAndrew J. Schorr
2007-04-15 Sebastien Tandel <sebastien@tandel.be> * bgp_aspath.c: (aspath_as_add, aspath_segment_add) Minor performance optimization: while loop should test one pointer instead of two.
2007-04-12Fix the display of some timers. (show ipv6 ripng and show ipv6 ripng status)Vincent Jardin
2007-04-11Fix the display of route timeout in "show ip rip". (Use ↵Vincent Jardin
thread_timer_remain_second)
2007-04-10[zebra] MTU change should propogate to zserv client on BSD/SolarisPaul Jakma
2007-04-10 Paul Jakma <paul.jakma@sun.com> * ioctl{_solaris,}.c: (if_get_mtu) Ping clients via zebra_interface_up_update if MTU is changed.
2007-04-10[bgpd] Bug #354: Take care to keep reads of MP_(UN)REACH_NLRI in boundsPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * bgp_attr.c: (general) Bug #354: parsing of MP_REACH_NLRI and MP_UNREACH_NLRI does not take sufficient care to ensure reads from stream buffer stay in-bounds. Hence bgpd may attempt to read beyond end of stream, if given a crafted packet. As it uses the stream access methods to do so, this will typically result in assert() being hit in stream.c. Where code is compiled without assert() enabled, result is unknown. (struct message attr_str) should be static. (bgp_mp_reach_parse) Carefully check length remaining in stream against amount desired to read from stream, prior to each read, particularly where lengths are conditional on data obtained from stream - using STREAM_READABLE. Remove code to parse SNPA-number, it's a defunct field and changed to a fixed size in latest BGP MP update RFC - log warning if SNPA-number is not 0. (bgp_mp_unreach_parse) Check withdraw_length carefully against STREAM_READABLE. (bgp_attr_parse) If attribute-parser function returns error, log warning. Log attribute type on mismatch.
2007-04-10[bgpd] V. quick route flap gets mistaken for duplicate, route is then ignoredPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * bgp_route.c: (general) Same bug as fixed on 2006-11-28 by ajs for bgp static routes, but for main BGP RIB: Quick 'flap' of routes can cause bgpd to mistake a new route for a duplicate route, due to presence of removed, but not yet processed BGP RIB entry. (bgp_update_rsclient) Ignore REMOVED bgp_info for duplicate, restore route instead. (bgp_update_main) Ditto.
2007-04-10[zebra] Retain configured IPv4 address upon removal by kernelPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * interface.c: (if_delete_update) Address removal triggered by kernel shouldn't remove configured IPv4 address from connected list.
2007-04-10[testzebra] stubs should call kernel_address_add on IP address installPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * {ioctl,kernel}_null.c: Install of IP address should reflect back to zebra via kernel_address_add..., makes testzebra more useful.
2007-04-10[zebra] Bug #351: Don't redistribute routes to ipv4 link-local prefixesPaul Jakma
2007-04-07 Paul Jakma <paul.jakma@sun.com> * lib/prefix.h: Add define to match IPv4 Link-Local addresses * zebra/redistribute.c: (zebra_check_addr) Don't redistribute routes to IPv4 link-local prefixes, fixes bug #351. * zebra/redistribute.h: Export zebra_check_addr. * zebra/router-id.c: (router_id_bad_address) re-use zebra_check_addr rather than implementing similar logic.
2007-04-10[bgpd] bug #352: IPv6/Multicast address-family config not written outPaul Jakma
2007-04-07 Paul Jakma <paul.jakma@sun.com> * bgpd.c: (general) Fix bug #352 (bgp_config_write_family_header) write ipv6/multicast address family header. (bgp_config_write) write out ipv6 multicast AF config.
2007-03-23[ospfd] Bug #330 regression: failure to calculate routes through networksPaul Jakma
2007-03-23 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: (ospf_nexthop_calculation) Fix silly regression causing ospfd to fail to calculate paths past networks not attached to root vertex, introduced with bug #330 fixes.
2007-03-23[ospfd] Instrument ospf_spf with more debug log messagesPaul Jakma
2007-03-23 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: (various) Add more debug statements.
2007-03-21[doc] Makefile VPATH patchAndrew J. Schorr
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * Makefile.am: Patch rule for draft-zebra-00.txt to work in VPATH build environments.
2007-03-21[ripd] Fix "show ip rip status" display of time until next updateAndrew J. Schorr
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second function instead of rip_next_thread_timer to display the time until next update properly. (rip_next_thread_timer) Remove obsolete function.
2007-03-20[lib] Make message lookup function more robust.Andrew J. Schorr
2007-03-20 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * log.c: (mes_lookup) Make the function more robust: check for cases where the index does not match the key value at that position. If so, give a warning and fall back to a linear search. And improve the error message in cases where even that fails.
2007-03-14[ospfd] Return SNMP standard neighbor state values, not quagga internal onesAndrew J. Schorr
2007-03-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_snmp.c: (ospf_snmp_neighbor_state) New function to map internal quagga neighbor states to SNMP standard values. (ospfNbrEntry) Call new ospf_snmp_neighbor_state function.
2007-03-14[ospfd] Fix two debug messages that used inet_ntoa more than onceAndrew J. Schorr
2007-03-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_zebra.c: (ospf_zebra_add, ospf_zebra_delete) Fix bug where inet_ntoa was used twice in the same debug message, which doesn't work because there's a single shared buffer for the returned string. The fix is to use inet_ntop.
2007-03-08[ospf6d] Bug 322: ospf6d show ipv6 neighbour showing wrong timesPaul Jakma
2007-03-08 David Siebörger d.sieborger@ru.ac.za * ospf6_neighbor.c: (ospf6_neighbor_show) Fix bug #322, ospf6d wasn't updated to match thread times changing to relative time.
2007-03-06[zebra] Fix interface metric bug on BSDPaul Jakma
2007-03-06 Paul Jakma <paul.jakma@sun.com> * kernel_socket.c: (ifam_read) Do not update interface metric on receipt of NEW/DEL ADDR messages, bogus as: a) some systems dont include iface metric for address events b) we didn't update clients either. Initial diagnosis by Eugene Grosbein.
2007-02-27[ospf6d] Fix string comparison bug in ospf6_lsa_handler_name.Andrew J. Schorr
2007-02-27 Pavol Rusnak <prusnak@suse.cz> * ospf6_lsa.c: (ospf6_lsa_handler_name) Fix bug: must use strcmp to compare strings.
2007-02-27[ospfd] Fix bug: should exit immediately on SIGTERM if OSPF not actually runningAndrew J. Schorr
2007-02-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospfd.c: (ospf_terminate) Exit immediately if ospf is not actually running (e.g. the config file was empty). Fixes bug where SIGTERM would not kill ospfd.
2007-02-26[ospfd] Fix regression in SPF introduced by bug#330 fixesPaul Jakma
2007-02-26 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: Fix regression introduced with bug #330 fix: The cost update added to ospf_spf_add_parent only handled PtP case, differing from same functionality in higher-level ospf_spf_next. Regression diagnosed by Anders Pedersen, mailnews+router-quagga-dev@news.cohaesio.com. (ospf_vertex_new) Initialise vertices to max-cost. (ospf_spf_init) Root vertex always creates with 0 cost. (ospf_spf_add_parent) Remove the buggy V->W cost calculating code, instead take the new distance as a parameter. (ospf_nexthop_calculation) Take distance as parameter, so it can be passed down to add_parent. (ospf_spf_next) Dont initialise candiate vertex distance, vertex_new does so already. Pass distance down to nexthop_calculation (see above).
2007-02-26[zebra] IRDP should ignore non-IPv4 addressesPaul Jakma
2007-02-26 Robert Olsson <Robert.Olsson@data.slu.se> * irdp_main.c: (irdp_send_thread) Skip non-AF_INET addresses, i.e. do not try interpret IPv6 addresses as IPv4 addresses to broadcast in IRDP announcements..
2007-02-22[solaris] Add licence boilerplate to files for clarityPaul Jakma
2007-02-22 Paul Jakma <paul.jakma@sun.com> * quagga.{xml,init}.in: Add licence boilerplate to ensure licence terms are clear.
2007-02-22[bgpd] Peer delete can race with reconfig leading to crashPaul Jakma
2007-02-22 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.c: (bgp_fsm_change_status) Handle state change into clearing or greater here. Simpler. (bgp_event) Clearing state change work moved to previous * bgp_route.c: (bgp_clear_route_node) Clearing adj-in here is too late, as it leaves a race between a peer being deleted and an identical peer being configured before clearing completes, leading to a crash. Simplest fix is to clean peers Adj-in up-front, rather than queueing such work. (bgp_clear_route_table) Clear peer's Adj-In and Adj-Out up-front here, rather than queueing such work. Extensive comment added on the various bits of indexed data that exist and how they need to be dealt with. (bgp_clear_route) Update comment.
2007-02-06use generic sed test so this works on autoconf 2.59Greg Troxel
2007-02-06de-support NetBSD 1.6, and note that FreeBSD 4 is on thin ice.Greg Troxel
Update notes on required tool versions Note that autoconf 2.59 is the standard (even though it's old, 2.60 and 2.61 are pretty recent). For others, pick releases that are at least 1.5 years old. Note that GNU awk is required. Replace update-autotools reference with bootstrap.sh. (no changelog, doc change only, per GNU coding standards)
2007-02-06Better comment explaining that GNU awk is really required.Greg Troxel
2007-02-06autoreconf -iGreg Troxel
2007-02-03add AC_PROC_SEDGreg Troxel
2007-02-03remove crufty m4 files from 2004. With the files, autoheader (2.61)Greg Troxel
bombs on NetBSD. (Without, all is ok. We may need workarounds, but first we should identify minimum tool versions and figure out what's still wrong.) ok'd by paul.
2007-02-02use bootstrap.shGreg Troxel
2007-02-02Provide 'standard interface', even if it just invokes autoreconf.Greg Troxel
2007-02-02ospf6d.h: remove declaration of errno (should be via header)Greg Troxel
(from pkgsrc)
2007-02-02* README.NetBSD: use update-autotools instead of autoreconfGreg Troxel
* update-autotools: print out tool name before invoking to aid debugging
2007-01-24[ospfd] Bug #330: SPF must consider that nexthop-calc may failPaul Jakma
2007-01-24 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: Bug #330: Nexthop calculation sometimes may fail, and it needs to indicate this result to SPF. (ospf_spf_add_parent) Flush of parent list needs to be done here, for simplicity. (ospf_nexthop_calculation) Caller needs to know whether nexthop calculation succeeded. Every return statement must correctly indicate such. (ospf_spf_next) Queueing/prioritisation of vertices in SPF must take into account whether nexthop_calculation succeeded, or SPF may fail to find best paths.
2006-12-13[zebra] For solaris IPv6 PtP interfaces, try to support prefixlen != 128Andrew J. Schorr
2006-12-13 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if_ioctl_solaris.c: (if_get_addr) For IPv6, stop assuming that all IFF_POINTOPOINT have prefixlen of IPV6_MAX_BITLEN. Instead, always try the SIOCGLIFSUBNET ioctl; if that fails, then we fall back to IPV6_MAX_BITLEN for PtP interfaces.
2006-12-12[PtP over ethernet] New peer flag allows much more addressing flexibilityAndrew J. Schorr
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating whether a peer address has been configured. Comment now shows the new interpretation of the destination addr: if ZEBRA_IFA_PEER is set, then it must contain the destination address, otherwise it may contain the broadcast address or be NULL. (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete macros that were specific to IPv4 and not fully general. (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag. (CONNECTED_PREFIX) New macro giving the prefix to insert into the RIB: if CONNECTED_PEER, then use the destination (peer) address, else use the address field. (CONNECTED_ID) New macro to come up with an identifying address for the struct connected. * if.c: (if_lookup_address, connected_lookup_address) Streamline logic with new CONNECTED_PREFIX macro. * prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros for better performance than the general prefix_copy function. * zclient.c: (zebra_interface_address_read) For non-null destination addresses, set prefixlen to equal the address prefixlen. This is needed to get the new CONNECTED_PREFIX macro to work properly. * connected.c: (connected_up_ipv4, connected_down_ipv4, connected_up_ipv6, connected_down_ipv6) Simplify logic using the new CONNECTED_PREFIX macro. (connected_add_ipv4) Set prefixlen in destination addresses (required by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead of testing for IFF_POINTOPOINT. Delete invalid warning message. Warn about cases where the ZEBRA_IFA_PEER is set but no destination address has been supplied (and turn off the flag). (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning. Set prefixlen in destination address so CONNECTED_PREFIX will work. * connected.h: (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. * interface.c: (connected_dump_vty) Use CONNECTED_PEER macro to decide whether the destination address is a peer or broadcast address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT). * if_ioctl.c: (if_getaddrs) Instead of setting a peer address only when the IFF_POINTOPOINT is set, we now accept a peer address whenever it is available and not the same as the local address. Otherwise (no peer address assigned), we check for a broadcast address (regardless of the IFF_BROADCAST flag). And must now pass a flags value of ZEBRA_IFA_PEER to connected_add_ipv4 when a peer address is assigned. The same new logic is used with the IPv6 code as well (and we pass the new flags argument to connected_add_ipv6). (if_get_addr) Do not bother to check IFF_POINTOPOINT: just issue the SIOCGIFDSTADDR ioctl and see if we get back a peer address not matching the local address (and set the ZEBRA_IFA_PEER in that case). If there's no peer address, try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set. * if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl without bothering to check the IFF_POINTOPOINT flag. And if no peer address was found, just try the SIOCGLIFBRDADDR ioctl without checking the IFF_BROADCAST flag. Call connected_add_ipv4 and connected_add_ipv6 with appropriate flags. * if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to connected_add_ipv6. * kernel_socket.c: (ifam_read) Must pass new flags argument to connected_add_ipv6. * rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2 to determine local and possible peer address (so there's no longer a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately. Pass new flags argument to connected_add_ipv6. (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast to determine whether the connected destination address is a broadcast address. * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) Simplify logic by using new CONNECTED_PREFIX macro. * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX macro. * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX macro, both options collapse into the same code. * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new CONNECTED_ID macro. (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX macro. * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro instead of testing the IFF_POINTOPOINT flag. * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro instead of testing with if_is_pointopoint. And add commented-out code to implement alternative (in my opinion) more elegant behavior that has no special-case treatment for PtP addresses. (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID macro to simplify logic. (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does not give a useful result if prefixlen is 32 (we require a peer address in such cases). * ripd.c: (rip_update_interface) Fix same bug as above.
2006-12-08[0.99] Bump version to 0.99.6Paul Jakma
2006-12-08 Paul Jakma <paul.jakma@sun.com> * configure.ac: Bump to 0.99.6
2006-12-08[isisd] Fix compiler warnings and allow v4-only compilationPaul Jakma
2006-12-08 Hannes Gredler <hannes@gredler.at> * isis_adjacency.c: (isis_new_adj) Allow NULL snpa argument. * isis_pdu.c: (various) Update calls to isis_new_adj() to pass NULL and use default. * (general) Add forward declarations where required. Fix up const char *'s. Allow V4-only compilation.
2006-12-08[zebra] Changes of nexthops of static routes didnt take effectPaul Jakma
2006-12-08 Piotr Chytla <pch@packetconsulting.pl> * zebra_rib.c: (static_install_ipv{4,6}) Case where existing RIB is updated must explicitely rib_addqueue the route_node, to ensure the update actually takes effect.
2006-12-08[bgpd] Bug #302, bgpd can get stuck in state ClearingPaul Jakma
2006-12-07 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.c: Bug #302 fix, diagnosis, suggestions and testing by Juergen Kammer <j.kammer@eurodata.de>. Fix follows from his suggested fix, just made in a slightly different way. (bgp_event) Transitions into Clearing always must call bgp_clear_route_all(). (bgp_stop) No need to clear routes here, BGP FSM should do it.
2006-12-04[ospfd] Consider all connected addresses when creating ospf interfacesAndrew J. Schorr
2006-12-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospfd.c: (ospf_network_run) Remove an offending 'break' statement. Previously, after creating a single ospf_interface on a given network interface, the code would skip to the next interface without considering other connected addresses on the interface. After removing the 'break', we now consider all connected addresses.
2006-11-30[bgpd] Implement 'debug bgp zebra' to log all messages to and from zebra.Andrew J. Schorr
2006-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * bgp_debug.h: Declare new bgp_debug_zebra conf and term flags, and define BGP_DEBUG_ZEBRA. * bgp_debug.c: Declare conf_bgp_debug_zebra and term_bgp_debug_zebra. (debug_bgp_zebra, no_debug_bgp_zebra, undebug_bgp_zebra) New functions to enable/disable bgp zebra debugging. (no_debug_bgp_all) Turn off zebra debugging. (show_debugging_bgp) Show whether zebra debugging is on. (bgp_config_write_debug) Add 'debug bgp zebra' if configured. (bgp_debug_init) Add new zebra debugging commands. * bgp_zebra.c: (bgp_router_id_update, bgp_interface_add, bgp_interface_delete, bgp_interface_up, bgp_interface_down, bgp_interface_address_add, bgp_interface_address_delete, zebra_read_ipv4, zebra_read_ipv6, bgp_zebra_announce, bgp_zebra_withdraw, bgp_redistribute_set, bgp_redistribute_unset) If zebra debugging is enabled, log an appropriate debug message.
2006-11-30[ospfd] Add debug messages for a few zebra messages that had been overlookedAndrew J. Schorr
2006-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_zebra.c: (ospf_router_id_update_zebra, ospf_interface_address_add, ospf_interface_address_delete) If (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE)) is enabled, then add a debug message about what Zebra is telling us. (ospf_zebra_add_discard) Add a debug message matching the one already in ospf_zebra_delete_discard.