summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-27ospfd: remove useless RFC1583 checkAlexandre Chappuis
* ospf_route.c: Function ospf_asbr_route_cmp is called uniquely from ospf_route_cmp() when the flag OSPF_RFC1583_COMPATIBLE is not set. Therefore, the check that the flag is set doesn't make sense at all and it can consequently be removed without doing any harm. Signed-off-by: Alexandre Chappuis <alc@open.ch> Signed-off-by: Roman Hoog Antink <rha@open.ch>
2011-09-27doc: BGP route-flap dampeningAlexandre Chappuis
2011-09-27doc: add missing wordAlexandre Chappuis
* ospfd.texi: Adjust meaning of the rfc1583compatibility option in order to match the RFC specification and the actual source code.
2011-09-26release: 0.99.19Denis Ovsienko
2011-09-26ospf6d: CVE-2011-3323 (fortify packet reception)Denis Ovsienko
This vulnerability (CERT-FI #514840) was reported by CROSS project. ospf6d processes IPv6 prefix structures in incoming packets without verifying that the declared prefix length is valid. This leads to a crash caused by out of bounds memory access. * ospf6_abr.h: new macros for size/alignment validation * ospf6_asbr.h: idem * ospf6_intra.h: idem * ospf6_lsa.h: idem * ospf6_message.h: idem * ospf6_proto.h: idem * ospf6_message.c * ospf6_packet_minlen: helper array for ospf6_packet_examin() * ospf6_lsa_minlen: helper array for ospf6_lsa_examin() * ospf6_hello_recv(): do not call ospf6_header_examin(), let upper layer verify the input data * ospf6_dbdesc_recv(): idem * ospf6_lsreq_recv(): idem * ospf6_lsupdate_recv(): idem * ospf6_lsack_recv(): idem * ospf6_prefixes_examin(): new function, implements A.4.1 * ospf6_lsa_examin(): new function, implements A.4 * ospf6_lsaseq_examin(): new function, an interface to above * ospf6_packet_examin(): new function, implements A.3 * ospf6_rxpacket_examin(): new function, replaces ospf6_header_examin() * ospf6_header_examin(): sayonara * ospf6_receive(): perform passive interface check earliest possible, employ ospf6_rxpacket_examin()
2011-09-26ospf6d: CVE-2011-3324 (DD LSA assertion)Denis Ovsienko
This vulnerability (CERT-FI #514839) was reported by CROSS project. When Database Description LSA header list contains trailing zero octets, ospf6d tries to process this data as an LSA header. This triggers an assertion in the code and ospf6d shuts down. * ospf6_lsa.c * ospf6_lsa_is_changed(): handle header-only argument(s) appropriately, do not treat LSA length underrun as a fatal error.
2011-09-26ospfd: CVE-2011-3325 part 2 (OSPF pkt type segv)Denis Ovsienko
This vulnerability (CERT-FI #514838) was reported by CROSS project. The error is reproducible only when ospfd debugging is enabled: * debug ospf packet all * debug ospf zebra When incoming packet header type field is set to 0x0a, ospfd will crash. * ospf_packet.c * ospf_verify_header(): add type field check * ospf_read(): perform input checks early
2011-09-26ospfd: CVE-2011-3325 part 1 (OSPF header underrun)Denis Ovsienko
This vulnerability (CERT-FI #514838) was reported by CROSS project. When only 14 first bytes of a Hello packet is delivered, ospfd crashes. * ospf_packet.c * ospf_read(): add size check
2011-09-26ospfd: CVE-2011-3326 (uknown LSA type segfault)CROSS
This vulnerability (CERT-FI #514837) was reported by CROSS project. They have also suggested a fix to the problem, which was found acceptable. Quagga ospfd does not seem to handle unknown LSA types in a Link State Update message correctly. If LSA type is something else than one supported by Quagga, the default handling of unknown types leads to an error. * ospf_flood.c * ospf_flood(): check return value of ospf_lsa_install()
2011-09-26bgpd: CVE-2011-3327 (ext. comm. buffer overflow)CROSS
This vulnerability (CERT-FI #513254) was reported by CROSS project. They have also suggested a fix to the problem, which was found acceptable. The problem occurs when bgpd receives an UPDATE message containing 255 unknown AS_PATH attributes in Path Attribute Extended Communities. This causes a buffer overlow in bgpd. * bgp_ecommunity.c * ecommunity_ecom2str(): perform size check earlier
2011-08-27ospf6d: add missing includeDenis Ovsienko
Two extern declarations in ospf6_abr.h are based on struct ospf6_route, which may not be available at the time ospf6_abr.h is included. This may lead to warnings after including ospf6_abr.h just for the structures defined in it.
2011-08-27ospf6d: move named constants to ospf6d.hDenis Ovsienko
2011-08-27ospf6d: justify some ABR debug codeDenis Ovsienko
* ospf6_abr.c * ospf6_abr_examin_summary(): only fill "buf" when it is used
2011-07-29Merge remote-tracking branch 'origin/master'Paul Jakma
2011-07-29Merge branch 'attr-errors'Paul Jakma
Contains BGP fixes: - set extcommunity crash: tihs patch tries to make the refcounting more robust but does not fully solve the problem, sadly. - BGP attribute error handling: Little testing.
2011-07-13Merge remote-tracking branch 'polymorf/master'Greg Troxel
2011-06-28fix typoRoman Hoog Antink
2011-06-28Omit --opaque-lsa from build (now default).Greg Troxel
2011-04-22ospf6d: copy "mtu-ignore" option from ospfdDmitrij Tejblum
"mtu-ignore" is an option ospfd used to mimic from the vendor's implementation, now ospf6d will also implement it. * ospf6_interface.h: extend ospf6_interface structure by one flag * ospf6_interface.c: (ipv6_ospf6_mtu_ignore, no_ipv6_ospf6_mtu_ignore): new declarations; (ospf6_interface_create): show initial value for consistency; (ospf6_interface_show): print flag status * ospf6_message.c: (ospf6_dbdesc_recv): consider interface-specific flag when checking MTU
2011-04-13zebra: trivial warning fixPaul Jakma
* zebra_routemap.c: (route_set_src) get rid of the dummy family variable.
2011-04-13bgpd: trivial format / warning fixesPaul Jakma
* bgp_aspath.c: (assegments_parse) just bail early if length doesn't match and fix the formatting. * bgp_network.c: add include needed for set_nonblocking * bgp_packet.c: formatting
2011-04-13ospf: Fix OSPF API and ospf-te LSA refreshers to match recent API changePaul Jakma
* ospf_apiserver.{c,h}: (ospf_apiserver_lsa_refresher) refreshers must now return the refreshed LSA. * ospf_te.{c,h}: (ospf_mpls_te_lsa_refresh) ditto * ospf_api.c: trivial compiler warning fix
2011-04-04Fix authorship of previous ospf6d commitPaul Jakma
2011-04-04ospf6d: fix crash if zebra_interface_state_read can't find interfaceIngo Flaschberger
* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read may return NULL, if it can't find an interface, deal with it.
2011-04-04ospf6d: fix crash if zebra_interface_state_read can't find interfacePaul Jakma
* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read may return NULL, if it can't find an interface, deal with it.
2011-04-01bgpd: fix memory leak when deleting a communityMichael Lambert
* bgp_routemap.c: (route_set_community_delete) When deleting a community in a route-map the old community was being orphaned. Like the description of the same code in route_set_community, this is a hack, not a true fix.
2011-04-01Revert "bgpd: "Intern" communities in route maps"Paul Jakma
This reverts commit 2c9fd7e07283b8904ef20030c9dadb032e999b12.
2011-03-30doc: Add dependency for quagga.pdf make targetPaul Jakma
* doc/Makefile.am: pdf target needs to depend on all the input files.
2011-03-29Merge remote-tracking branch 'remotes/quagga/master'Paul Jakma
2011-03-29bgpd: Fix merge error in jhash commitPaul Jakma
* bgp_attr.c: (attrhash_key_make) 98e30f should have changed jhash2 to jhash. These kinds of merge errors would be reduced and life would be easier if people would submit fully-formed fixes that could be chucked directly into git-am.
2011-03-28bgpd: refine the setting up of GTSMStephen Hemminger
* bgpd.h: Add error code for setting GTSM on iBGP * bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal incompatibility of GTSM+iBGP to vty. Consider the session state when setting GTSM, and reset Open/Active peers to let them pick up new TTL from start.
2011-03-24build: treat opaque-lsa default correctly for ospfapiGreg Troxel
In deciding whether to default ospfapi to on or off, use the same rule for opaque-lsa as earlier: != no rather than = yes, so that not having set it implies yes.
2011-03-24lib: Add support for IPv6 ttl securityStephen Hemminger
* sockunion.c: (sockopt_minttl) Add IPv6 support for min hop count. The kernel support is Linux kernel 2.6.35 or later.
2011-03-24bgpd: Cleanups & fixes for minttl / GTSMStephen Hemminger
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup. ({no_,}neighbor_ttl_security) ditto. * bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only need to be done on transition. * sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
2011-03-23bgpd: RFC 5082 Generalized TTL Security Mechanism supportNick Hilliard
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used to verify that incoming packets have been sent from neighbours no more than X IP hops away. In other words, this allows packets that were sent from further away (i.e. not by the neighbour with known distance, and so possibly a miscreant) to be filtered out. * lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL using the IP_MINTTL socket opt. * bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command error for minttl. (struct peer) add a config variable, to store the configured minttl. (peer_ttl_security_hops_{set,unset}) configuration handlers * bgpd.c: (peer_group_get) init gtsm_hops (peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and GTSM can't both be active for a peer at the same time. (peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with ebgp_multihop. (bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X". * bgp_vty.c: (bgp_vty_return) message for BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK (peer_ebgp_multihop_{un,}set_vty) * bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate. (bgp_connect) ditto for outbound.
2011-03-23Merge branch 'master' of ssh://code.quagga.net/var/git/quaggaPaul Jakma
2011-03-23bgpd: Fix compile failure if IPv6 build was disabled.Paul Jakma
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network which is HAVE_IPV6, so these should be too. (bgp_route_init) and the installs should be similarly ifdefed
2011-03-23lib: fix more format warnings (#637)Christian Hammers
The following patch was also neccessary to compile. * command.c: (config_logmsg_cmd) use "%s" format spec * if.c: (connected_log) ditto
2011-03-22bgpd: attribute jhash call should use a standard interface to in6_addr dataStephen Hemminger
* bgp_attr.c; (attrhash_key_make) s6_addr is only member of in6_addr guaranteed to be available - s6_addr32 isn't. Fix to be more portable, and thus allow compilation on BSD again.
2011-03-22ospfd: Compile fix for opaque supportPaul Jakma
* ospfd: Refresher logic cleanup broke OSPF opaque, which does its own thing with regard to refresher logic and which also, in the protocol, requires implementations to keep state of which OI an LSA is received on (rather than providing information in the LSA to allow it to be looked up - as other LSAs requiring such assocation were careful to do). * ospf_lsa.h: (struct ospf_interface) Add back the pointer to oi, but only for type-9 now. * ospf_nsm.c: (ospf_db_summary_add) check the oi actually exists first - doesn't obviate the need for opaque to ensure oi pointers get cleaned up when ospf_interfaces disappear. * ospf_opaque.{c,h}: (ospf_opaque_functab,ospf_opaque_lsa_refresh) Refresher LSA functions now need to return the LSA to the general refresh logic, to indicate whether the LSA was refreshed.
2011-03-22build: change sense of opaque-{lsa,te} enable args to enable by defaultPaul Jakma
* configure.ac: (AC_ARG_ENABLE({ospf-te,opaque-lsa})) reverse the sense to --disable (enable_{opaque_lsa,ospf_te}) treat as enabled unless explicitly disabled.
2011-03-21bgpd: enable TCP corkingStephen Hemminger
* bgp_packet.c: (bgp_write) On BGP write, use TCP_CORK to provide hints to kernel about TCP buffering. This will cause BGP packets to occur in bigger chunks (full size MTU), improving performance and getting rid of one of the problems reported in the UNH BGP conformance test.
2011-03-21lib: add TCP_CORK wrapperStephen Hemminger
* sockunion.{c,h}: (sockopt_cork) wrapper for TCP_CORK socket option for those platforms that provide it. For other platforms, it is just a nop.
2011-03-21bgpd: leave peer socket in non-blocking mode (mostly)Stephen Hemminger
* bgpd: Rather than toggling socket in/out of non-block mode, just leave it in nonblocking mode. One exception is in bgp_notify which only happens just before close.
2011-03-21bgpd: "Intern" communities in route mapsMichael Lambert
* bgp_community.[ch]: (community_lookup) New helper function to look up a community list in the hash table. * bgp_routemap.c: A new community structure was being allocated for every BGP update which matched a route map which set a community. This behavior led to rapid growth in the memory consumed by bgpd. Adding the communities to the hash table addresses the memory growth, but may introduce a problem in modifying or deleting the 'set community' statement in the route map.
2011-03-21bgpd: New show commands for improved view and address family supportMichael Lambert
Many show commands do not have support for multiple views and do not treat different address families uniformly. The following changes add a number of commands with support for views and rationalized treatment of IPv4 v IPv6 and unicast v multicast (such as in JUNOS, IOS XR and more recent versions of IOS). * bgp_route.c: (bgp_show_community) Inserted a new second argument (the name of the view) and the code to look up that name in the BGP structure. The NULL argument in the call to bgp_show (indicating the default view) was replaced by the specified view. The existing calls to bgp_show_community had a NULL second argument inserted to make clear that they refer to the default view. (top level) Added new functions via the DEFUN and/or ALIAS macros (and the associated command table entries) to add the commands show bgp ipv4 (unicast|multicast) show bgp ipv4 (unicast|multicast) A.B.C.D show bgp ipv4 (unicast|multicast) A.B.C.D/M show bgp ipv6 (unicast|multicast) show bgp ipv6 (unicast|multicast) X:X::X:X show bgp ipv6 (unicast|multicast) X:X::X:X/M These show either the full BGP table or the specified route or prefix for the given address family. show bgp view WORD (ipv4|ipv6) (unicast|multicast) community show bgp view WORD (ipv4|ipv6) (unicast|multicast) community \ (AA:NN|local-AS|no-advertise|no-export){1,4} For the specified view and address family, these show entries matching any community or the specified communit(y)(ies). show bgp view WORD (ipv4|ipv6) (unicast|multicast) neighbors \ (A.B.C.D|X:X::X:X) (advertised-routes|received-routes) For the specified view and address family, show the routes advertised to or received from the given BGP neighbor. show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) A.B.C.D show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) X:X::X:X show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M For the specifed (optional) view and address family, show either the full BGP table or the specified route or prefix for the given route server client peer. * bgp_vty.c: (top level) Added new functions via the DEFUN and/or ALIAS macros (and the associated command table entries) to add the commands show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) summary show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) rsclient summary For the specified (optional) view and address family, display either the normal summary table for BGP peers, or the route server client table showing the import and export policies.
2011-03-21release: 0.99.18Paul Jakma
* configure.ac: Bump to 0.99.18
2011-03-21bgpd: Implement revised error handling for partial optional/trans. attributesPaul Jakma
* BGP error handling generally boils down to "reset session". This was fine when all BGP speakers pretty much understood all BGP messages. However the increasing deployment of new attribute types has shown this approach to cause problems, in particular where a new attribute type is "tunneled" over some speakers which do not understand it, and then arrives at a speaker which does but considers it malformed (e.g. corruption along the way, or because of early implementation bugs/interop issues). To mitigate this drafts before the IDR (likely to be adopted) propose to treat errors in partial (i.e. not understood by neighbour), optional transitive attributes, when received from eBGP peers, as withdrawing only the NLRIs in the affected UPDATE, rather than causing the entire session to be reset. See: http://tools.ietf.org/html/draft-scudder-idr-optional-transitive * bgp_aspath.c: (assegments_parse) Replace the "NULL means valid, 0-length OR an error" return value with an error code - instead taking pointer to result structure as arg. (aspath_parse) adjust to suit previous change, but here NULL really does mean error in the external interface. * bgp_attr.h (bgp_attr_parse) use an explictly typed and enumerated value to indicate return result. (bgp_attr_unintern_sub) cleans up just the members of an attr, but not the attr itself, for benefit of those who use a stack-local attr. * bgp_attr.c: (bgp_attr_unintern_sub) split out from bgp_attr_unintern (bgp_attr_unintern) as previous. (bgp_attr_malformed) helper function to centralise decisions on how to handle errors in attributes. (bgp_attr_{aspathlimit,origin,etc..}) Use bgp_attr_malformed. (bgp_attr_aspathlimit) Subcode for error specifc to this attr should be BGP_NOTIFY_UPDATE_OPT_ATTR_ERR. (bgp_attr_as4_path) be more rigorous about checks, ala bgp_attr_as_path. (bgp_attr_parse) Adjust to deal with the additional error level that bgp_attr_ parsers can raise, and also similarly return appropriate error back up to (bgp_update_receive). Try to avoid leaking as4_path. * bgp_packet.c: (bgp_update_receive) Adjust to deal with BGP_ATTR_PARSE_WITHDRAW error level from bgp_attr_parse, which should lead to a withdraw, by making the attribute parameter in call to (bgp_nlri_parse) conditional on the error, so the update case morphs also into a withdraw. Use bgp_attr_unintern_sub from above, instead of doing this itself. Fix error case returns which were not calling bgp_attr_unintern_sub and probably leaking memory. * tests/aspath_test.c: Fix to work for null return with bad segments
2011-03-21bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
2011-03-21tools/multiple-bgpd.sh: set some community attributes to help test themPaul Jakma