summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-04ospf6d: fix crash if zebra_interface_state_read can't find interfacePaul Jakma
* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read may return NULL, if it can't find an interface, deal with it.
2011-04-01bgpd: fix memory leak when deleting a communityMichael Lambert
* bgp_routemap.c: (route_set_community_delete) When deleting a community in a route-map the old community was being orphaned. Like the description of the same code in route_set_community, this is a hack, not a true fix.
2011-04-01Revert "bgpd: "Intern" communities in route maps"Paul Jakma
This reverts commit 2c9fd7e07283b8904ef20030c9dadb032e999b12.
2011-03-30doc: Add dependency for quagga.pdf make targetPaul Jakma
* doc/Makefile.am: pdf target needs to depend on all the input files.
2011-03-29Merge remote-tracking branch 'remotes/quagga/master'Paul Jakma
2011-03-29bgpd: Fix merge error in jhash commitPaul Jakma
* bgp_attr.c: (attrhash_key_make) 98e30f should have changed jhash2 to jhash. These kinds of merge errors would be reduced and life would be easier if people would submit fully-formed fixes that could be chucked directly into git-am.
2011-03-28bgpd: refine the setting up of GTSMStephen Hemminger
* bgpd.h: Add error code for setting GTSM on iBGP * bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal incompatibility of GTSM+iBGP to vty. Consider the session state when setting GTSM, and reset Open/Active peers to let them pick up new TTL from start.
2011-03-24build: treat opaque-lsa default correctly for ospfapiGreg Troxel
In deciding whether to default ospfapi to on or off, use the same rule for opaque-lsa as earlier: != no rather than = yes, so that not having set it implies yes.
2011-03-24lib: Add support for IPv6 ttl securityStephen Hemminger
* sockunion.c: (sockopt_minttl) Add IPv6 support for min hop count. The kernel support is Linux kernel 2.6.35 or later.
2011-03-24bgpd: Cleanups & fixes for minttl / GTSMStephen Hemminger
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup. ({no_,}neighbor_ttl_security) ditto. * bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only need to be done on transition. * sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
2011-03-23bgpd: RFC 5082 Generalized TTL Security Mechanism supportNick Hilliard
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used to verify that incoming packets have been sent from neighbours no more than X IP hops away. In other words, this allows packets that were sent from further away (i.e. not by the neighbour with known distance, and so possibly a miscreant) to be filtered out. * lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL using the IP_MINTTL socket opt. * bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command error for minttl. (struct peer) add a config variable, to store the configured minttl. (peer_ttl_security_hops_{set,unset}) configuration handlers * bgpd.c: (peer_group_get) init gtsm_hops (peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and GTSM can't both be active for a peer at the same time. (peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with ebgp_multihop. (bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X". * bgp_vty.c: (bgp_vty_return) message for BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK (peer_ebgp_multihop_{un,}set_vty) * bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate. (bgp_connect) ditto for outbound.
2011-03-23Merge branch 'master' of ssh://code.quagga.net/var/git/quaggaPaul Jakma
2011-03-23bgpd: Fix compile failure if IPv6 build was disabled.Paul Jakma
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network which is HAVE_IPV6, so these should be too. (bgp_route_init) and the installs should be similarly ifdefed
2011-03-23lib: fix more format warnings (#637)Christian Hammers
The following patch was also neccessary to compile. * command.c: (config_logmsg_cmd) use "%s" format spec * if.c: (connected_log) ditto
2011-03-22bgpd: attribute jhash call should use a standard interface to in6_addr dataStephen Hemminger
* bgp_attr.c; (attrhash_key_make) s6_addr is only member of in6_addr guaranteed to be available - s6_addr32 isn't. Fix to be more portable, and thus allow compilation on BSD again.
2011-03-22ospfd: Compile fix for opaque supportPaul Jakma
* ospfd: Refresher logic cleanup broke OSPF opaque, which does its own thing with regard to refresher logic and which also, in the protocol, requires implementations to keep state of which OI an LSA is received on (rather than providing information in the LSA to allow it to be looked up - as other LSAs requiring such assocation were careful to do). * ospf_lsa.h: (struct ospf_interface) Add back the pointer to oi, but only for type-9 now. * ospf_nsm.c: (ospf_db_summary_add) check the oi actually exists first - doesn't obviate the need for opaque to ensure oi pointers get cleaned up when ospf_interfaces disappear. * ospf_opaque.{c,h}: (ospf_opaque_functab,ospf_opaque_lsa_refresh) Refresher LSA functions now need to return the LSA to the general refresh logic, to indicate whether the LSA was refreshed.
2011-03-22build: change sense of opaque-{lsa,te} enable args to enable by defaultPaul Jakma
* configure.ac: (AC_ARG_ENABLE({ospf-te,opaque-lsa})) reverse the sense to --disable (enable_{opaque_lsa,ospf_te}) treat as enabled unless explicitly disabled.
2011-03-21bgpd: enable TCP corkingStephen Hemminger
* bgp_packet.c: (bgp_write) On BGP write, use TCP_CORK to provide hints to kernel about TCP buffering. This will cause BGP packets to occur in bigger chunks (full size MTU), improving performance and getting rid of one of the problems reported in the UNH BGP conformance test.
2011-03-21lib: add TCP_CORK wrapperStephen Hemminger
* sockunion.{c,h}: (sockopt_cork) wrapper for TCP_CORK socket option for those platforms that provide it. For other platforms, it is just a nop.
2011-03-21bgpd: leave peer socket in non-blocking mode (mostly)Stephen Hemminger
* bgpd: Rather than toggling socket in/out of non-block mode, just leave it in nonblocking mode. One exception is in bgp_notify which only happens just before close.
2011-03-21bgpd: "Intern" communities in route mapsMichael Lambert
* bgp_community.[ch]: (community_lookup) New helper function to look up a community list in the hash table. * bgp_routemap.c: A new community structure was being allocated for every BGP update which matched a route map which set a community. This behavior led to rapid growth in the memory consumed by bgpd. Adding the communities to the hash table addresses the memory growth, but may introduce a problem in modifying or deleting the 'set community' statement in the route map.
2011-03-21bgpd: New show commands for improved view and address family supportMichael Lambert
Many show commands do not have support for multiple views and do not treat different address families uniformly. The following changes add a number of commands with support for views and rationalized treatment of IPv4 v IPv6 and unicast v multicast (such as in JUNOS, IOS XR and more recent versions of IOS). * bgp_route.c: (bgp_show_community) Inserted a new second argument (the name of the view) and the code to look up that name in the BGP structure. The NULL argument in the call to bgp_show (indicating the default view) was replaced by the specified view. The existing calls to bgp_show_community had a NULL second argument inserted to make clear that they refer to the default view. (top level) Added new functions via the DEFUN and/or ALIAS macros (and the associated command table entries) to add the commands show bgp ipv4 (unicast|multicast) show bgp ipv4 (unicast|multicast) A.B.C.D show bgp ipv4 (unicast|multicast) A.B.C.D/M show bgp ipv6 (unicast|multicast) show bgp ipv6 (unicast|multicast) X:X::X:X show bgp ipv6 (unicast|multicast) X:X::X:X/M These show either the full BGP table or the specified route or prefix for the given address family. show bgp view WORD (ipv4|ipv6) (unicast|multicast) community show bgp view WORD (ipv4|ipv6) (unicast|multicast) community \ (AA:NN|local-AS|no-advertise|no-export){1,4} For the specified view and address family, these show entries matching any community or the specified communit(y)(ies). show bgp view WORD (ipv4|ipv6) (unicast|multicast) neighbors \ (A.B.C.D|X:X::X:X) (advertised-routes|received-routes) For the specified view and address family, show the routes advertised to or received from the given BGP neighbor. show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) A.B.C.D show bgp [view WORD] ipv4 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) X:X::X:X show bgp [view WORD] ipv6 (unicast|multicast) \ rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M For the specifed (optional) view and address family, show either the full BGP table or the specified route or prefix for the given route server client peer. * bgp_vty.c: (top level) Added new functions via the DEFUN and/or ALIAS macros (and the associated command table entries) to add the commands show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) summary show bgp [view WORD] (ipv4|ipv6) (unicast|multicast) rsclient summary For the specified (optional) view and address family, display either the normal summary table for BGP peers, or the route server client table showing the import and export policies.
2011-03-21release: 0.99.18Paul Jakma
* configure.ac: Bump to 0.99.18
2011-03-21bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d.
2011-03-21bgpd/security: CVE-2010-1674 Fix crash due to extended-community parser errorPaul Jakma
* bgp_attr.c: (bgp_attr_ext_communities) Certain extended-community attrs can leave attr->flag indicating ext-community is present, even though no extended-community object has been attached to the attr structure. Thus a null-pointer dereference can occur later. (bgp_attr_community) No bug fixed here, but tidy up flow so it has same form as previous. Problem and fix thanks to anonymous reporter.
2011-03-21ospf6d: Extend the "[no] debug ospf6 route" vty commandsTom Goff
* ospf6_route.c ([no_]debug_ospf6_route) Include memory as a debug option. This allows ospf6 route memory debugging to be enabled or disabled interactively or from a config file.
2011-03-21ospf6d: Route locking (memory) cleanupTom Goff
* ospf6_route.c: (ospf6_route_best_next) Allows unlock route, even when there's no next route. This is consistent with how ospf6_route_next() behaves. * ospf6_intra.c: (ospf6_intra_prefix_lsa_remove) Make sure the last route considered is always unlocked. This is needed when the for loop terminates because ospf6_route_is_prefix() returns zero.
2011-03-21ospf6d: Have ospf6d cleanup when it terminates normallyTom Goff
A clean exit makes it easier to use memory debuggers. * ospf6_asbr.c: (ospf6_asbr_terminate) Add a function to do route map cleanup. * ospf6_lsa.c: (ospf6_lsa_terminate) Add a function to cleanup the lsa handler vector. * ospf6_main.c: (ospf6_exit) Add an function that causes ospf6d to gracefully exit. * ospf6_message.c: (ospf6_message_terminate) Add a function that frees the send and receive buffers. * ospf6_top.c: (ospf6_delete) Enable the ospf6_delete() function. Disable ospf6 before freeing everything.
2011-03-21ospf6d: Remove obsolete codeTom Goff
* ospf6_area.c: (ospf6_area_delete) Get rid of unused code that refers to a nonexistent function and structure member.
2011-03-21ospf6d: Fix memory allocation issues in SPFTom Goff
* ospf6_area.c: Call ospf6_spf_table_finish() before deleting the spf table. This ensures that the associated ospf6_vertex structures are also freed. * ospf6_spf.c: Only allocate a priority queue when a spf calculation is actually performed. Also defer calling ospf6_spf_table_finish().
2011-03-21lib: zlog should clean up its memoryTom Goff
* log.c: (closezlog) Also free the dynamically allocated filename when a log is closed.
2011-03-21lib: Add a function to delete all interfacesTom Goff
if.c: (if_terminate) This adds a cleanup function that can be called when a daemon exits, similar to vty_terminate().
2011-03-21bgpd: use Jenkins hash for BGP transit, cluster and attr hashesStephen Hemminger
* bgp_attr.c: I observed while doing some debugging that even for simple tests there was a lot of hash collisions for BGP attributes. Switch to using Jhash rather than additive hashing. Probably overkill, but the function is fast and available. ({attrhash,cluster,transit}_hask_key_make) convert to Jenkins hash, instead of additive hash.
2011-03-21lib: Better hashing of string values using Bernstein hashStephen Hemminger
* hash.{h,c}: (string_hash_make) Hash optimised for strings, current implementation using Bernstein hash, which offers a good compromise between distribution and performance. * distribute.c: (distribute_hash_make) use previous instead of additive string hash. * if_rmap.c: (if_rmap_hash_make) ditto
2011-03-21bgpd: Remove extra lock on interior table nodeBarry Friedman
If the radix tree creates an extra interior node in bgp_node_get(), it locks the interior node even though this node is not returned to the caller, so it may never be unlocked. The lock prevents this node from being deleted. * bgpd/bgp_table.c: (bgp_node_get) Remove lock on interior node which prevents proper node deletion
2011-03-21bgpd: Fix display of unsigned attributesWataru Tanitsu
* bgp_route.c: (route_vty_out*) The local prefix, metric and weight values are all stored as uint32_t. Change the format to %u so that large values are not displayed as negative integers.
2011-03-21bgpd: fix use of free memory by update_rsclientStephen Hemminger
* bgp_route.c: (bgp_static_update_rsclient) BGP sometimes crashes when removing route server client because of use after free. The code to update rsclient created a local static copy of bgp attributes but neglected to handle the extra information pointer. The extra information was getting freed by bgp_attr_unintern() and reused later when the copy was passed to bgp_attr_intern(). The fix is to use the attr_dup function to create a copy of the extra information, then clean it up.
2011-03-21bgpd: unlock node on aggregate errorRobert Bays
* bgp_route.c: (bgp_aggregate_set) make sure to unlock BGP node if failure
2011-03-21bgpd: fix errors in aggregate address commandRobert Bays
* bgpd: (bgp_aggregate_{set,unset,delete}) This fixes locking and other issues with aggregate set/unset command
2011-03-21bgpd: use XCALLOC to allocate bgpd damp arrayStephen Hemminger
* bgpd: (bgp_damp_parameter_set) The BGP reuse_index is not initialized properly. This would cause sporadic crash when disabling dampening. Use XCALLOC correctly and the right size array is initialized and no memset is needed.
2011-03-21bgpd: fix bgp_node locking issuesChris Caputo
* bgpd: Connected table locks were being locked but not unlocked, such that eventually a lock would exceed 2^31 and become negative, thus triggering an assert later on. * bgp_main.c: (bgp_exit) delete connected elements along with ifp's. * bgp_nexthop.c: (bgp_nexthop_lookup{,_ipv6}) add missing unlocks (bgp_multiaccess_check_v4) ditto (bgp_connected_{add,delete}) Use a distinct memtype for bgp_connected_ref. (bgp_scan_finish) reset the nexthop cache to clean it up when bgpd exits * bgp_route.c: fix missing bgp_node unlocks * lib/memtype.c: (memory_list_bgp) add MTYPE_BGP_CONN * testing: has been tested for almost 2 months now.
2011-03-21lib: Fix accounting of memoryChris Hall
* lib/memory.c: (zrealloc) If is called with NULL pointer then it should increment allocations because it behaves the same as zmalloc. (zfree) is called with NULL pointer, it does nothing therefore allocation count should not change.
2011-03-20Merge paul/ospfd/201012-review ospfd and lib/ fixes and performance improvementsPaul Jakma
2011-03-18doc: fix "ipv6 address" interface command syntax (#608)Denis Ovsienko
2011-03-18bgpd: improve "monotonic" uptime correctionJohn Kemp
Older versions of Quagga/Zebra would output a value in MRT table dump files for "uptime" aka "ORIGINATED" that was a WALL clock value. Given that uptime is now internally a bgp_clock MONOTONIC value, the output in the MRT files is showing up as monotonic. Note: time of MRT dump is still recorded correctly as a time() based value, so we haven't lost that value. Proposal is to correct the uptime output on the vty and in the MRT files to again display something more akin to WALL time. * bgp_dump.c: (bgp_dump_routes_func) add conditional correction * bgp_route.c: (route_vty_out_detail) make correction conditional, move variable declaration to beginning of the function
2011-03-13ripngd: copy debug statements fix from ripdStephen Hemminger
Doesn't ripng needs same fix as ripd.
2011-02-24ripd: resolve debug statements issue (bug 442)Andrew J. Schorr
...A nasty bug, if you forgot to disable debugging, stored the config and reboot your machine - if you really depend on ripd, then the machine will not fully come back on the network, because ripd fails.
2011-01-17bgpd: VTY string fixes for debug commandsDavid Ward
* bgpd/bgp_debug.c: fix VTY strings for BGP debug commands to match correct syntax
2011-01-14bgpd: fix handling of "Unsupported Capability"Dmitrij Tejblum
* bgp_packet.c: (bgp_notify_receive) justify the difference between BGP_NOTIFY_OPEN_UNSUP_PARAM and BGP_NOTIFY_OPEN_UNSUP_CAPBL cases, as it is explained in RFC5492, page 3, paragraph 1. "Unsupported Capability" error does not mean, that the peer doesn't support capabilities advertisement -- quite the opposite (if the peer would not support capabilities advertisement, the code would be "Unsupported Optional Parameter"). Thus there is no reason to mark the peer as one non-supporting capabilities advertisement. Example: suppose the peer is in fact IPv6-only, but we didn't configure anything address-family specific for it. Then, the peer would refuse the session with "Unsupported Capability" code. If we internally set the peer as non-supporting capabilities advertisement after that, we will not be able to establish the session with it ever, even with a fixed configuration -- IPv6-only BGP session cannot be established without capabilities. In practice an edge case would be seen as the same IPv6 peer working with its "neighbor" block read from bgpd.conf, but not working, when slowly input in "conf t" mode.
2011-01-13ospf6d: fix crash in SPF calculationDmitrij Tejblum
* ospf6_spf.c: Don't replace a node with another node with a lower number of hops, instead get them from the queue in the correct order. (Actually, the replacement crashed the ospf6d daemon rather than worked.)