| Age | Commit message (Collapse) | Author |
|---|
|
this is not a full release version, so neither release notes nor
documentation are updated yet. Also, signing the tag with my private
GPG key instead of the Quagga one.
|
|
Incorporate a patch by Svetozar Mihailov which implements
default-originate route-maps to behave as expected, i.e. allowing
the default route to be advertised conditionally, depending on a
criterion given by the route-map.
I am aware that the performance attributes of the following implementation
are far from optimal. However, this affects only code paths belonging to
a feature that is broken without this patch, therefore, it seems reasonable
to me to have this in the mainline for now.
Cc: Svetozar Mihailov <quagga@j.zarhi.com>
Reported-by: Sébastien Cramatte <scramatte@gmail.com>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This pushes out the NOTIFY message before closing a connection.
Previously, the TCP_CORK bandwidth optimization code caused NOTIFY
messages to disappear prior to when the connection is closed.
* bgpd/bgp_packet.c: unset CORK, set NODELAY, and replace
writen() by more correct write()
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This reverts commit b07458a055493dd37cb955ae90f11ae8bc334d3a.
On second thought, the right way to do this is with rename(), not by
introducing a lock that can potentially even stall bgpd.
Reported-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Quagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly
on other systems as well). Particularly, sizeof(struct sockaddr_dl)
returns a size that does not include the full sdl_data field, leading to
not enough data being copied. This breaks IPv6 RAs in particular, as
a broken mac address from sockaddr_dl will be included in the packets.
From: Matthias-Christian Ott <ott@mirix.org>
Tested-by: Uwe Toenjes <6bone@6bone.informatik.uni-leipzig.de>
[further simplified + more comments]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
|
|
This script compiles Quagga in a variety of configurations and
optionally with LLVM and ICC (if those are installed).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Newer MacOSX versions have support for both IPv6 advanced socket API
RFCs (2292 and 3542) switchable in compile time, but neither of these
is default for some strange reason. RFC3542 will be default in future,
but for now we have to declare that we want to use the RFC3542 API
before including <netinet/in.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
AM_CONFIG_HEADER has been deprecated for many years and is removed
completely from automake 1.13.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Keep data flowing, uncork after each BGP_WRITE_PACKET_MAX.
This makes TCP send data sooner, since thread may not be scheduled
again for a a longish time because of new UPDATE's coming in.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The readtime value is for diagnostic, and doesn't have to be highly
accurate. This also fixes a problem where the readtime was being measured
with system clock, but the peer_uptime() was comparing with bgp_clock.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Measuring the resource usage of threads is moderately expensive
since it requires doing an additional system call everytime a
thread context switches. Make it possible to disable this with
a configuration option.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The flag bit BGP_NODE_PROCESS_SCHEDULED is checked but never set.
This causes route node to be scheduled multiple times under load.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Invalid BGP Notification messages should be logged locally, cf.
RFC4271, Sect. 6.4, p 34,
NOTIFICATION Message Error Handling
Current notification for invalid Notification code:
2012/10/10 02:17:54 BGP: message index 10 not found in bgp_notify_msg (max is 8)
2012/10/10 02:17:54 BGP: 192.168.1.1 received NOTIFICATION 10/0 ((no item found)) 0 bytes
the logging should be a bit more clear. The above logging really doesn't
explain much and looks more like a programming error.
[rewrote most of it to get in something I can call a shape -David]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
BGP4-ANVL 20.1 ANVL tries to open BGP with version 5 and expects correct
notification in response. Quagga sends notification, but with incorrect
information in it.
The data needs to be a 2-byte value, and for now we respond with 0004 for any
peer version other than 4.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Commit 558d1fec11749d3257e improved bgp_attr_dup so it would be possible
for the caller to provide attr_extra, allowing to use the stack instead
of the heap for operations requiring only a short lived attr.
However, this commit introduced a bug where bgp_attr_dup wouldn't copy
attr_extra at all (but provide a reference to the original) if the
caller provided attr_extra.
Cc: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
zebra was not checking afi/safi values. This was leading to crashes where
these values were coming directly from some protocol's on-wire fields.
Safeguarding them in zebra is a good start.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
If a neighbor was in a peer group for any AFI/SAFI, bgpd would never write a
"no neighbor activate" line for IPv4 unicast, so a valid setup like following
could be configured, but not saved:
router bgp 64600
bgp router-id 198.51.100.1
network 198.51.100.0/24
neighbor peers peer-group
neighbor 2001:db8::2 remote-as 64601
no neighbor 2001:db8::2 activate
!
address-family ipv6
network 2001:db8:1::/48
neighbor peers activate
neighbor peers soft-reconfiguration inbound
neighbor 2001:db8::2 peer-group peers
exit-address-family
!
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
In bgp_clear_route_table, moved cleanup code before the allocation
of the work queue items. This returns the memory to the system
allocator before allocating new and might therefore help avoiding
heap fragmentation.
* bgp_route.c: (bgp_clear_route_table) moved code blocks.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Reviewed-by: Leonid Rosenboim <Leonid.Rosenboim@windriver.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
If a peer with soft-reconfiguration configured is cleared, the
function bgp_clear_route_table() doesn't free the bgp_adj_in and bgp_adj_out
structures of route nodes that for some reason, ej. denied by a filter,
don't have routes attached "rn->info == NULL".
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Reviewed-by: Leonid Rosenboim <Leonid.Rosenboim@windriver.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
ALL_LIST_ELEMENTS is checking node == NULL twice, which is causing a
whole slew of false positives in Coverity. In this particular case,
addressing this in the code is reasonable; being a macro, this appears
all over the place without easy remedy.
Acked-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Change default value of variable NL_PKT_BUF_SIZE to 8192UL. Cf.
NLMSG_GOODSIZE definition of linux in include/linux/netlink.h for detail.
Previously, on platforms with a page size greater than 8192, if you had added
too many interfaces, zebra would not have enough buffer space to get the entire
interface list. This resulted in an incomplete interface list.
From: 高鹏 <gpstrive@gmail.com>
[updated to apply after FPM patches]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
There are systems with no /bin/true - it might have different path
(/usr/bin/true) or even a shell builtin.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
LLVM clang does not support #pragma weak (bug 3679) on OS X. There are
other systems where the #pragma weak has varying syntax.
Added m4 file from the autoconf archives:
http://www.gnu.org/software/autoconf-archive/ax_sys_weak_alias.html
Fix up zebra/*_null.c files to use #pragma weak alias or stub functions
if not available. It's incomplete in that the different format #pragma
enable easier fixes on need.
Tested on 64bit OS X 10.7, FreeBSD 9.0 amd64 & i386 (32bit) using
gcc & clang. Tested on linux 64bit.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Stop additional, unnecessary flooding of MaxAge LSAs.
When a MaxAge LSA is installed, if the LSA is prematurely aged or the LSA is
not self-originated, the LSA is flushed. This results in a the LSA being
flooded a second time and in some cases flooded back to the receiver
(unless the receiver is also the advertising router). A MaxAge'd LSA has
already been flooded in ospf_flood() as part of the LSA receive processing
(ospf_ls_upd). A self-originated LSA will be flooded from the originate/refresh
routine. Thus, in the install routine, a MaxAge'd LSA only needs to be added
to the MaxAge LSA list.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
This fix is for Type-4 LS updates handling at a ABR router where
ospf daemon is not distributing Type-4 LS updates with correct LS-Age
after learning about a ASBR router in a ospf network. Because of this
Type-5 LS updates are not learnt in ospf network.
Testing Scenario:
This can be re-produced by restarting the ospfd daemon on DUT
(mentioned in figure below)before the Hello time interval expires
for area 0.0.0.1.
____ _______ ____ _________
| | area: 0.0.0.1 | | area: 0.0.0.0 | | area: 0.0.0.2 | |
| R1 |---------------------|DUT/ABR|---------------------| R2 |------------------| R3/ASBR |
|____| x.x.x.0/24 |_______| y.y.y.0/64 |____| z.z.z.0/24 |_________|
In the above setup when ospfd is restarted (imp:before the Hello interval
at R1 expires) and DUT learns about ASBR router R3 (Type-4) in the
network from R2, but this ls-update is not propagates in area
0.0.0.1. So R1 never comes to know about the ASBR router in the
network, so all the type-5 LS updates coming from R3 are not learnt
by R1. Further if we again restart ospfd daemon it starts working fine.
With the fix given this issue can be resolved.
More Discussion on this is available at:
http://www.gossamer-threads.com/lists/quagga/dev/23892
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
A set of patches to clarify some comments as well as cleanup code that was
causing warnings. After these patches, the code can be compiled with
-Wall -Wsign-compare -Wpointer-arith -Wbad-function-cast -Wwrite-strings
-Wmissing-prototypes -Wmissing-declarations -Wchar-subscripts -Wcast-qual
-Wextra -Wno-unused-parameter -Wno-missing-field-initializers
(what is current in trunk plus -Wextra -Wno-unused-parameter
-Wno-missing-field-initializers).
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
elsewhere
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Since LEGAL_TE_INSTANCE_RANGE() was being passed an unsigned int, a warning
was being thrown due to the compare against >= 0. Since this macro was used
only in one place, I removed the macro for an explict compare against a
constant for the MAX.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
The VTY_GET_INTEGER_RANGE macro was being used also just to check the range
on a variable that wasn't used (for the "no" version of a VTY command), so I
split the macro into two. Also, since the variable is unsigned, if MIN is
zero, you get a warning about comparing an unsigned number against 0, giving
rise to slightly convoluted logic. Note that the previous two patches were
found by the -Wtype-limits and -Wunused-variables warnings. Without the
changes to these macros, these warnings are triggered erroneously, making it
harder to find the real problems.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
In the original code, negative metrics would be converted successfully by
atoi() and then converted to an unsigned int that would always compare
successfully against >= 0, leaving a large positive metric in the route map.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Typo bug. ospf_nbr_nbma_poll_interval_set() was being sent priority instead
of interval.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Use the correct argument for the protocol lookup in
ospf distribute-list commands.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
The ospf_apiserver_enable flag was being cleared _after_ the "-a"
command-line option set it to 1. Move up the initialisation, so
enabling the OSPF API is actually possible.
Reported-by: Rosario Mattera <rosmattera@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
The OSPF RFC (2328) states that the network mask field of a type 4
LSA "is not meaningful and must be zero". OSPFD has been setting
the mask as /32. This patch changes OSPFD to set the mask to 0 per
the RFC
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Reduce the log level for the MaxAge LSA reception when such an LSA does
not exist in the database.
Signed-off-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Nolan Leake <nolan@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Store the MaxAge LSA list in a tree instead of a linked list for efficient access.
Walking the list can be quite inefficient in some large systems and under certain tests.
ospfd maintains the list of LSA's that have been MaxAge'd out in a separate
linked list for removal by a remover/walker thread. When a new LSA is to be
installed, the old LSA is ejected and when it is ejected, the MaxAge LSA list
is traversed to ensure that the old LSA is also removed from this list if it
exists on this list.
When a large number (> 5K) MaxAge LSAs are bombarding the system, walking this
list takes a significant time causing timers to fire and actions to be taken
such as expiring neighbors due to expiry of DeadInterval (especially when timer
is really low, <= 12s), creating a spiral of instability.
By making this MaxAge LSA list be a tree, this problem is mitigated.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
In the event areas are created at a later point of time with respect
to the playback of the "max-metric router-lsa administrative" command,
those areas do not get into indefinite max-metric mode. This patch is
inteneded to store the configuration and apply it to all future areas
that may be created.
In the process, some other bugs that were there with respect to restart
etc are fixed up.
Tested locally to see that the fix works across multiple
areas and across multiple restarts.
Signed-off-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: JR Rivers <jrrivers@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
After a SPF run, OSPF deletes routes that have changed in terms of any
metric, type, and/or next-hops and re-adds them. Given that the Zebra-RIB
already support replacement semantics, we suppress deletes for routes
that will be added back again.
This has the following advantages. It reduces the number of IPC messages
between OSPF/Zebra. Also, in the current flow, a batch of route deletes
were followed by a batch of adds even for say a metric change.
With the change, routes are sent as "add" when they are modified. Zebra
already implicitly deletes older routes.
Signed-off-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
Don't error out when someone tries using --with-pkg-git-version on
something that isn't actually a git checkout (like a dist tarball).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
automake file lists haven't quite kept up with recent changes, time to
fix them up so the dist tarball actually works...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Intel's icc doesn't accept "-wd <number>" anymore, it's "-wd<number>"
these days. But, anyhow, the warnings disabled in Quagga's configure.ac
don't seem to appear anywhere at all, so let's just remove the option
completely.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
the isis ipv6 reachability metric is transmitted in big endian / network
format, but isis_spf_process_lsp() does not convert this into host endian
format when mucking around with local cost + received metric. This patch
fixes this problem and makes received ipv6 metrics work properly on
little-endian machines.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
When switching to metric-style transition, circuit metrics should also be
verified to be in the narrow range 0..63.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
When switching to narrow metric style, all configured circuits are
verified to have a valid narrow style metric. Check te_metric instead
of metric_default as the latter is only 8bit wide and may overflow for
wide style metrics.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
this fixes a bunch of issues found by Coverity SCAN and flagged as
"high" impact -- although, they're all rather minute issues.
* isisd/isis_adjacency.c: one superfluous check, one possible NULL deref
* isisd/isis_circuit.c: two prefix memory leaks
* isisd/isis_csm.c: one missing break
* isisd/isis_lsp.c: one possible NULL deref
* isisd/isis_pfpacket.c: one error-case fd leak
* isisd/isis_route.c: one isis_route_info memory leak
* isisd/isis_routemap.c: one... fnord
* isisd/isis_tlv.c: one infinite loop
Reported-by: Coverity SCAN
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
