summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-02-11 * ospf_lsdb.c: Fix sum of checksums calculation.hasso
[backport candidate]
2005-02-10notes on what files contain what, and an initial stab at understandinggdt
how much storage is required.
2005-02-092005-02-09 Paul Jakma <paul.jakma@sun.com>paul
* (global) Update code to match stream.h changes. stream_get_putp effectively replaced with stream_get_endp. stream_forward renamed to stream_forward_getp. stream_forward_endp introduced to replace some previous setting/manual twiddling of putp by daemons. * lib/stream.h: Remove putp. Update reference to putp with endp. Add stream_forward_endp, which daemons were doing manually. Rename stream_forward to stream_forward_getp. lib/stream.c: Remove/update references to putp. introduce stream_forward_endp.
2005-02-092005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the error message.
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Reduce structure padding by putting new u_char field multicast_memberships in a better spot (grouped with other u_char fields type and state).
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Change macro definitions SET_FLAG and UNSET_FLAG to use compound assignment operators (aesthetic change).
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Improve passive_interface comment. Add new multicast_memberships bitmask to struct ospf_interface to track active multicast subscriptions. Declare new function ospf_if_set_multicast. * ospf_interface.c: (ospf_if_set_multicast) New function to configure multicast memberships properly based on the current multicast_memberships status and the current values of the ospf_interface state, type, and passive_interface status. (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is now handled by ism_change_state's call to ospf_if_set_multicast). (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now handled by ism_change_state). * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave the DRouters multicast group (now handled by ism_change_state's call to ospf_if_set_multicast). (ism_change_state) Add call to ospf_if_set_multicast to change multicast memberships as necessary to reflect the new interface state. * ospf_packet.c: (ospf_hello) When a Hello packet is received on a passive interface: 1. Increase the severity of the error message from LOG_INFO to LOG_WARNING; 2. Add more information to the error message (packet destination address and interface address); and 3. If the packet was sent to ospf-all-routers, then try to fix the multicast group memberships. (ospf_read) When a packet is received on an interface whose state is ISM_Down, enhance the warning message to show the packet destination address, and try to update/fix the multicast group memberships if the packet was sent to a multicast address. When a packet is received for ospf-designated-routers, but the current interface state is not DR or BDR, then increase the severity level of the error message from LOG_INFO to LOG_WARNING, and try to fix the multicast group memberships. * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from active to passive. (no_ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from passive to active. (show_ip_ospf_interface_sub) Show multicast group memberships.
2005-02-082005-02-08 Paul Jakma <paul@dishone.st>paul
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
2005-02-042005-02-04 Paul Jakma <paul@dishone.st>paul
* ripd.c: Untangle the construction of RIP auth data. (rip_auth_prepare_str_send) new helper function, prepare correct key string. (rip_auth_simple_write) new helper, write out the rip simple password auth psuedo-RTE. (rip_auth_md5_ah_write) new helper, write out the MD5 auth-header psuedo-RTE. (rip_auth_header_write) new helper, write out correct auth header data / psuedo-RTE. (rip_auth_md5_set) rip out the memmove and writing of the auth header psuedo-RTE. So that all that is left is to write the trailing auth digest, and update digest offset field in the original header. (rip_write_rte) rip out writing of RIP header, writing of simple auth data psuedo-RTE. Make it do what its name suggests, write out actual RTEs. (rip_output_process) remove the incorrect additional decrements of rtemax. Prepare the auth_str, which simple or MD5 auth will need. Move write out of RIP header and auth data to inside the loop. Adjust paramaters as required.
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (zlog_signal,zlog_backtrace_sigsafe) Eliminate use of fileno() since it is not async-signal-safe. (_zlog_assert_failed) Rewrite crashlog logic more compactly. (zlog_set_file,zlog_reset_file,zlog_rotate) Update logfile_fd for use in signal handler.
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* basic.texi: Add note about last-resort crash logging to /var/tmp when file logging is not configured. * quagga.info: updated build of autogenerated file
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (syslog_sigsafe) Reduce scope of syslog_fd: it is accessed inside this function only. (open_crashlog) New function to open /var/tmp/quagga.<daemon>.crashlog with flags O_WRONLY|O_CREAT|O_EXCL to save some crash info. (zlog_signal,_zlog_assert_failed) Increase logging priority from LOG_ERR to LOG_CRIT. If no file logging is configured, try to use open_crashlog to create a crash logfile. (zlog_backtrace_sigsafe) If a crashlog file descriptor is open, dump a backtrace to that file.
2005-02-022005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down, not for event ISM_InterfaceDown. And improve the message by adding the interface flags. * if.h: Declare if_flag_dump. [backport candidate]
2005-02-02 * bgp_vty.c: Deprecate "neighbor transparent-as" and "neighborhasso
transparent-nexthop" commands. [merge from GNU Zebra]
2005-02-02 * bgp_routemap.c: New route-map command - "match ip route-source".hasso
[merge from GNU Zebra]
2005-02-02 * bgp_clist.[ch], bgp_route.c, bgp_routemap.c, bgp_vty.c:hasso
community-list cleanup. [merge from GNU Zebra]
2005-02-02 * bgp_route.c, bgp_vty.c, bgp_zebra.c, bgpd.[ch]: "enforce-multihop"hasso
-> "disable-connected-check". [merge from GNU Zebra]
2005-02-02 * bgp_fsm.c, bgp_open.c, bgp_packet.c, bgp_route.[ch], bgp_vty.c,hasso
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp graceful-restart" commands added. Show numbers of individual messages in "show ip bgp neighbor" command. Final pieces of graceful restart. [merge from GNU Zebra]
2005-02-01 * bgp_open.c, bgp_packet.c, bgp_vty.c, bgpd.[ch]: Remove "no neighborhasso
capability route-refresh" commands. Route refresh capability is sent anyway now. Preserve dummy deprecated commands. [merge from GNU Zebra]
2005-02-01 * bgp_attr.c, bgp_snmp.c, bgp_vty.c, bgpd.[ch]: Remove support for oldhasso
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor version" command as deprecated. [merge from GNU Zebra]
2005-02-01 * bgpd.[ch], bgp_vty.c, bgp_route.c: "Restart session afterhasso
maximum-prefix limit" feature support. [merge from GNU Zebra]
2005-02-01 * bgp_nexthop.c: Improve debug.hasso
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master() function. * bgp_packet.c: MP AFI_IP update and withdraw parsing. * bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status() is better place to log about peer status change than bgp_event(). Log in bgp_connect_success(). * bgp_vty.c: Fix typo in comment. * bgp_attr.c: Better log about unknown attribute. [merge from GNU Zebra]
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* daemon.c: (daemon) Replace perror with zlog_err. * vty.c: (vty_serv_un) Replace perror with zlog_err. * ripd.c: (rip_create_socket) Replace perror with zlog_err. * ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with zlog_err. * ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with zlog_err.
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ripng_interface.c: (ripng_multicast_join) Save errno before calling ripngd_privs.change.
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ripd.c: (rip_create_socket) Save errno before calling ripd_privs.change.
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_network.c: (ospf_sock_init) Save errno before calling ospfd_privs.change.
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* buffer.h: Fix comment on buffer_getstr to reflect that it now uses XMALLOC. * buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc. * filter.c: (access_list_remark,ipv6_access_list_remark) Use argv_concat instead of buffer_getstr. * if.c: (interface_desc) Use argv_concat instead of buffer_getstr. * plist.c: (ip_prefix_list_description,ipv6_prefix_list_description) Use argv_concat instead of buffer_getstr. * bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead of buffer_getstr. * bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string returned by buffer_getstr. (bgp_show_community) Must use XFREE instead of free on string returned by buffer_getstr. * bgp_routemap.c: (set_community) Must use XFREE instead of free on string returned by buffer_getstr. * bgp_vty.c: (neighbor_description) Use argv_concat instead of buffer_getstr.
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* if_ioctl_solaris.c: (interface_list_ioctl) Save errno before calling zserv_privs.change. * ioctl{,_solaris}.c: (if_ioctl,if_ioctl_ipv6) Save errno before calling zserv_privs.change. * ipforward_solaris.c: (solaris_nd) Save errno before calling zserv_privs.change. * irdp_main.c: (irdp_sock_init) Save errno before calling zserv_privs.change. [backport candidate]
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* rt_netlink.c: (netlink_socket,netlink_request,netlink_parse_info, netlink_talk) Save errno before calling zserv_privs.change. [backport candidate]
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print an error message and return. (ospf_read) If the interface state is ISM_InterfaceDown, issue a warning message and ignore the packet.
2005-01-282005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes for functions with no arguments (must specify argument list as void). * vtysh.c: Enhance vtysh_client array to include the daemon's name and bitmask and socket path (in addition to the fd). This allows us to use loop constructs for various operations that need to be applied to all client daemons, and it facilitates better error messages. Also fix some prototypes with void argument lists. (vclient_close) Issue a warning message indicating which daemon's socket is being closed. (vtysh_execute_func,vtysh_config_from_file) Use a for loop to call vtysh_client_execute. (vtysh_write_terminal,write_config_integrated) Use a for loop to call vtysh_client_config. (vtysh_write_memory) Use a for loop to call vtysh_client_execute. (vtysh_show_daemons) Use a for loop. (vtysh_connect) The struct vtysh_client is now statically initialized, so do not initialize it here. (vtysh_connect_all) Use a for loop to call vtysh_connect. Set ripd_client pointer for use in vtysh_exit_ripd_only.
2005-01-282005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* lib/buffer.h: Document behavior of buffer_getstr function. * lib/buffer.c: (buffer_getstr) Fix bug: must handle case where the string extends beyond the head struct buffer_data.
2005-01-282005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* lib/command.h: Document behavior of argv_concat function. * lib/command.c: (argv_concat) Calculate total string length first so we can call malloc just once (instead of realloc'ing to add each string element). (do_echo,config_logmsg) Allow for possible NULL return value from argv_concat.
2005-01-252005-01-25 Paul Jakma <paul@dishone.st>paul
* ospf6_asbr.c: Add "hsls" to the zroute_name const char array.
2005-01-242005-01-24 Paul Jakma <paul@dishone.st>paul
* configure.ac: Bump version to 0.99.0 * doc/quagga.info: Version bump (autogenerated)
2005-01-24 * bgp_route.c: Fix showstopper bug. New route must be selected alsohasso
if old one is flaged as BGP_INFO_ATTR_CHANGED.
2005-01-242005-01-24 Martin Pot <mpot at martybugs.net>paul
* zebra/rt_netlink.c: ignore wireless newlink netlink messages.
2005-01-23 * lib/command.[ch]: Make node_parent() function nonstatic. vtyh.c willhasso
use it as well. * vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already works in vty.
2005-01-23 * vtysh.conf.sample: Fix typo "integrated-vtysh-conf" ->hasso
"integrated-vtysh-config".
2005-01-182005-01-18 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.h: Test for SA_SIGINFO to see whether zlog_signal takes final two args (siginfo and program_counter). * log.c: (hex_append) Include this function only if SA_SIGINFO or HAVE_GLIBC_BACKTRACE is defined. (zlog_signal) Final two args (siginfo and program_counter) now depend on whether SA_SIGINFO is defined on this platform. * sigevent.c: (program_counter) Do not include this function if SA_SIGINFO is not defined on this platform. (exit_handler,core_handler) Test for SA_SIGINFO to decide whether 2nd & 3rd arguments are present and to decide how to invoke zlog_signal. (trap_default_signals) Test for SA_SIGINFO and invoke sigaction appropriately.
2005-01-18 * *.c: Changed many functions to static. Some commented outhasso
functions and some tiny related fixes. No functional changes.
2005-01-18 * interface.c: Better statistics output in "show interface" command inhasso
case of /proc being used. I don't have others to test with at the moment.
2005-01-172005-01-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.h: Change prototype for zlog_backtrace_sigsafe to take additional program_counter argument. * log.c: (zlog_backtrace_sigsafe) Add additional program_counter argument. If it is non-NULL, use backtrace_symbols_fd to resolve the address. (zlog_signal) Call zlog_backtrace_sigsafe with additional program_counter argument. [pullup candidate]
2005-01-17 * bgp_route.c: Clear peer's routing table regardless whether it'shasso
configured or not. Being not configured is even better reason to do it.
2005-01-16 * main.c: With --nl-bufsize argument is required.hasso
[pullup candidate]
2005-01-16 * command.[ch], vty.c: cmd_execute_command() function must not attempthasso
to walk up in the node tree if called from vtysh. Different daemons might have commands with same syntax in different nodes (for example "router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons). * vtysh.c: Reflect changes in lib. cmd_execute_command() should know now that it's called from vtysh and must not attempt to walk up in the node tree. [pullup candidate]
2005-01-152005-01-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* redhat/quagga.spec.in: Fix postun script to avoid misleading error message saying the postun scriptlet failed when watchquagga is not running. (pullup candidate)
2005-01-142005-01-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.c (print_version): Do not bother even to examine host.name, since it is always NULL when this function is called from main.
2005-01-142005-01-14 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* command.c (print_version): Don't print host.name if it is NULL. Fixes segfault on Solaris reported by Goetz von Escher <goetz@open.ch> (pullup candidate)
2005-01-12Ignore <dist tarball>.asc - i always seem to have one hanging around frompaul
last release..