summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-07-27[vtysh] Never skip authentication, and add support for multiple -c commandsAndrew J. Schorr
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vtysh.1: Document new options -d and -E, and note that now multiple -c options may be supplied, with embedded linefeed now supported. In BUGS section, remove warning about vtysh causing a daemon to freeze, since this has been fixed. * vtysh_main.c: (usage) Add new -d and -E options. And note that -c can be used multiple times, possibly with embedded linefeeds. (longopts) Add new -d and -E options. (main) Add new -d and -E options, and create a linked list to support multiple -c options. Do not call vtysh_connect_all until after vtysh_read_config(config_default) and vtysh_auth have succeeded. This prevents the vtysh.conf file from configuring any daemons, and it ensures that authentication has been passed before we send any commands to any daemons. Call vtysh_connect_all with any daemon name supplied with -d. If it is unable to connect to any daemons, issue an error message and exit immediately. When used in -c mode, call vtysh_execute("enable") before executing the commands in order to match interactive behavior. And detect embedded linefeed chars in -c commands and break them up appropriately. * vtysh.h: (vtysh_connect_all) Fix proto to reflect new daemon_name argument, and that it now returns an integer -- the number of daemons to which we were able to connect. * vtysh.c: (vtysh_connect_all) Add a new daemon_name argument. If supplied, connect only to that daemon. And return the number of daemons to which we were able to connect. (vtysh_prompt): Performance enhancement -- make struct utsname static so we call uname to get the hostname only once.
2006-07-27[zebra] Connected routes must always be added to main tablePaul Jakma
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg> * connected.c: (connected_up_ipv4) interface connected routes always go to table main (or otherwise they cannot be used by linux as nexthops) * zserv.c: (zread_ipv4_add) send route to the correct routing table * zebra_rib.c (static_install_ipv4) set routing table
2006-07-26[ospfd] Allow ospf_lsa_unlock to NULL out callers' LSA pointers upon freePaul Jakma
2006-07-26 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.{c,h}: (ospf_lsa_unlock) Change to take a double pointer to the LSA to be 'unlocked', so that, if the LSA is freed, the callers pointer to the LSA can be NULLed out, allowing any further use of that pointer to provoke a crash sooner rather than later. * ospf_*.c: (general) Adjust callers of ospf_lsa_unlock to match previous. Try annotate 'locking' somewhat to show which 'locks' are protecting what LSA reference, if not obvious. * ospf_opaque.c: (ospf_opaque_lsa_install) Trivial: remove useless goto, replace with return. * ospf_packet.c: (ospf_make_ls_ack) Trivial: merge two list loops, the dual-loop predated the delete-safe list-loop macro.
2006-07-25[ospfd] Additional NSM neighbour state change stats/informationPaul Jakma
2006-07-25 Paul Jakma <paul.jakma@sun.com> * ospf_neigbor.h: (struct ospf_neighbor) Add some additional neighbour state statistics fields, timestamps for progressive and regressive state changes, and pointer to event string for the latter state change. * ospf_nsm.c: (nsm_notice_state_change) Update new state changs history as required. * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print out above new per-neighbour state change stats.
2006-07-25[lib] Optimise thread_call by caching pointer to thread history in the threadPaul Jakma
2006-07-25 Paul Jakma <paul.jakma@sun.com> * thread.h: (struct thread) Add a cache pointer to the struct cpu_thread_history, if it is known - saving hash lookup on each thread_call. * thread.c: (thread_call) Cache the pointer to the cpu_thread_history, so that future thread_calls of same thread can avoid the hash_lookup.
2006-07-11[ospfd] record timestamp and event of last NSM state change for neighbourPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) Record state change timestamp and event in nbr struct. * ospf_neighbor.h: (struct ospf_neighbor) Add fields to record timestamp of last NSM change and event. * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print last state change timestamp and event, if available.
2006-07-11[ospfd] trivial: NSM AdjChange should print event, declutter core functionsPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_notice_state_changes) Move state change logging code to new func to declutter nsm_change_state and ospf_nsm_event. Log event with AdjChange, it's useful to know. (nsm_change_state) move adjchange and snmp logging to previous. (ospf_nsm_event) call nsm_notice_state_changes from here. Move the debug message to entry of function, so it gets out even if something goes wrong.
2006-07-11[ospfd] Remove nsm_reset_nbr and a bunch of useless NSM event/action functionsPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_change_state) call nsm_clear_adj for all adjacency losses, hence removing need for nsm_reset_nbr. (nsm_reset_nbr) kill it, clear_adj in previous does fine. (nsm_kill_nbr,nsm_start) remove nsm_reset_nbr call. (ospf_nsm_event) Allow NSM function to be NULL, this along with removal of nsm_reset_nbr, allows a bunch of now useless functiosn to be removed. Remove some useless variables. (nsm_ignore) now useless, remove. (nsm_bad_ls_req) ditto (nsm_seq_number_mismatch) " (nsm_oneway_received) " (nsm_inactivity_timer) " (nsm_ll_down) " (NSM) replace removed action functions with NULL.
2006-07-11[ospfd] Improve Hello NetworkMask mismatch warning to give more infoAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_hello) Improve NetworkMask mismatch warning message to include interface name and conflicting prefix lengths.
2006-07-11[lib] Do not call vty_close in vty_log_out to avoid possible free memory accessAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out) Do not call vty_close, because this could result in a parent function's accessing the freed memory. Instead, set status VTY_CLOSE and call shutdown(vty->fd, SHUT_RDWR). And add a comment on vty_close.
2006-07-10[lib] Fix infinite recursion for errors on vtys with terminal monitor enabledAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out, vty_read, vty_flush, vtysh_flush, vtysh_read) After an I/O error, must set vty->monitor to 0 before calling zlog_warn, otherwise an infinite recursion could occur (since zlog_warn triggers a message to be written to the vty, and that in turn triggers another error message when it fails, etc.).
2006-07-10[ospfd] cleanup NSM neighbour delete through a new Deleted NSM statePaul Jakma
2006-07-07 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.h: Add a NSM_Deleted neighbour state, to act as dummy state indicating the neighbour is to be deleted. * ospf_nsm.c: (general) Use the NSM_Deleted state to delete neighbours, thus allowing code to be slightly more obvious in its flow. (nsm_timer_set) Add NSM_Deleted. Add another timer the code missed. (nsm_kill_nbr) No need for special case call to nsm_change_state anymore. Make the assert and error-handling for same case more readable (Andrew Schorr) Remove the call to ospf_nbr_delete, nsm_change_state can do this generally now via NSM_Deleted. (struct ... NSM) Add the dummy NSM_Deleted state, the 3 events that can lead to nsm_kill_nbr all now transition the NBR to NSM_Deleted and the general change_state function can be left to do the work. (ospf_nsm_event) Special casing of events and early-return can be removed now. On transition into Deleted, delete the nbr. * ospf_dump.c: (ospf_nsm_state_msg) Add Deleted.
2006-07-06[ospfd] early-return in nsm_event missed LLDown event, fixes use after freePaul Jakma
2006-07-06 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) LLDown event also results in nbr being deleted, requires early-return too. Likely explains some crash reports after interface events.
2006-07-04[doc] remove the auto-generated quagga.info file from CVSPaul Jakma
2006-07-04 Paul Jakma <paul.jakma@sun.com> * quagga.info: remove auto-generated file. It will still be present in dist tarballs, so shouldn't affect anyone but direct users of CVS. Required texinfo version should be widely available. * .cvsignore: ignore quagga.info
2006-07-04[ospfd] Apply some simplifications to ospf_nsm, from Andrew's suggestionsPaul Jakma
2006-07-04 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (general) Various small cleanups from Andrew's review of last set of patches. (nsm_timer_set) Loading, Full and default can share same code too. (nsm_should_adj) Can just be one big OR. (nsm_twoway_received) Collapse into return statement.
2006-07-04[ospfd] CID #13, dont try print out fields of LSA we know to be NULL.Paul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.c: (ospf_translated_nssa_refresh) CID #13.
2006-07-04[ospfd] Clear adjacency state for NSM changes down to TwoWay/ExStartPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_clear_adj) clear adjacency related state for a neighbour, needed for some state changes from > ExStart down to ExStart or less, which need not go through nsm_reset_nbr. (nsm_reset_nbr) move code to former. Should be static. (ospf_nsm_event) Remove long dead code. Use nsm_clear_adj for state changes that take down adjacencies to TwoWay/ExStart. (nsm_kill_nbr) Oops, action function shouldn't try return 1 for error.
2006-07-04[ospfd] trivial cleanup of nsm_timer_setPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_timer_set) ls_req timer should be OFF in early states. Compact several identical sections. Set inactivity timer to OFF for Down, for documentary purposes.
2006-07-04[ospfd] Ensure NSM state functions can redirect next_state accidentlyPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) Don't allow action functions to change next_state if the NSM tables do not indicate next_state is conditional, log warning if one tries - existing code appears fine though.
2006-07-04[ospfd] consolidate adjacency check logicPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_should_adj) New function, just consolidate the 10.4 adjacency check from nsm_twoway_received/nsm_adj_ok. (nsm_twoway_received/nsm_adj_ok) Use former.
2006-07-03[debug] Debug messages to terminal vty sessions should include timestampsAndrew J. Schorr
2006-07-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vty.c: (vty_log_out) Debug messages to terminal vty sessions should include timestamps.
2006-07-02[zebra] Fix CID #104, check addr for null, and #18, check nexthop type argsPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not proceed if addr is NULL. * zebra_rib.c: (static_add_ipv6) Fix CID #18, double check required arguments are supplied for the given nexthop type.
2006-07-02[bgpd] Fix crash on shutdown of peerPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * bgp_fsm.c: (bgp_{stop,start}) Move clear/free of certain bits of state from stop to start, as they may be used via peer references on clearing queues..
2006-06-30[ripd] update to use auto-generated redistribute route-type defsPaul Jakma
2006-06-29 Paul Jakma <paul.jakma@sun.com> * rip_zebra: (general) convert redistribute commands to use the auto-generated defines.
2006-06-30[lib] Fix merge error in ChangeLogPaul Jakma
- entry was left in wrong order, according to date.
2006-06-30[ospfd] Fix "show ip ospf neighbor A.B.C.D" to show all matchesAndrew J. Schorr
2006-06-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_vty.c: (show_ip_ospf_neighbor_id) Should show all instances of that neighbor (since it may appear on multiple interfaces) instead of bailing out after showing the first match.
2006-06-30[lib] Fix typo in cpp conditional for malloc.h includePaul Jakma
2006-06-28 Paul Jakma <paul.jakma@sun.com> * memory.c: Fix typo in cpp conditional around malloc.h, from comment in bug #269.
2006-06-30[ospfd] Avoid getting NSM stuck in ExStart by using local view of DR/BDRAndrew J. Schorr
2006-06-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_nsm.c: (nsm_twoway_received) When deciding whether to change from state Init to ExStart, the test for whether the neighboring router is DR or BDR should be against the local router's notion of DR/BDR, not the neighbor's view.
2006-06-29[ospfd] Implement new ospf router subcommand "log-adjacency-changes [detail]"Andrew J. Schorr
2006-06-28 Erik Muller <erikm@internap.com> * ospfd.h: Define 2 new struct ospf config flags: OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL * ospf_nsm.c (nsm_change_state): Log adjacency changes if requested. * ospf_vty.c (ospf_log_adjacency_changes): New command function to implement ospf subcommand "log-adjacency-changes [detail]". (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes. (show_ip_ospf) Show whether adjacency changes are logged. (ospf_config_write) Add "log-adjacency-changes [detail]" to config. (ospf_vty_init) Add ospf_log_adjacency_changes and no_ospf_log_adjacency_changes. * ospfd.texi: Document new ospf router subcommand "log-adjacency-changes [detail]".
2006-06-27[lib] Remove bare routes in route_types: fix mistake in commmitPaul Jakma
2006-06-27 Paul Jakma <paul.jakma@sun.com> * route_types.awk: Fix previous commit. Forgot to remove the printf of the bare/numeric route-type help string (empty string)
2006-06-27[lib] Remove numeric route-type argument in redistribute arg stringsPaul Jakma
2006-06-27 Paul Jakma <paul.jakma@sun.com> * route_types.awk: Remove setting the 'bare' numeric route type in redist strings.
2006-06-27[ospfd] Replace redistribution strings with new route_types.h defines.Paul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * ospf_vty.c: (general) Replace in-place route redistribution command and help strings with the new auto-generated defines from lib/route_types.h
2006-06-27[lib] Centralise Zserv route type information, auto-generate redist stringsPaul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * route_types.txt: New file, table of ZEBRA_ROUTE definitions. * route_types.awk: New script, to parse previous and generate (for now) redistribute string defines. * Makefile.am: build route_types.h using previous two, ala memtypes.h, include the script and table file in EXTRA_DIST. * command.h: pull in route_types.h, add a REDIST_STR define.
2006-06-26[doc] OSPF MD5 keyid documentation, fix texinfo warnings in bgpd.texiPaul Jakma
2006-06-26 Paul Jakma <paul.jakma@sun.com> * ospfd.texi: Document that MD5 keyid is part of the protocol. * bgpd.texi: shut texinfo warnings up by replacing brackets in variable with angle brackets.
2006-06-26[ospfd] NSSA translate-enabled ABR should declare itself as ASBRPaul Jakma
2006-06-26 Paul Jakma <paul.jakma@sun.com> * ospf_abr.c: (general) NSSA translate-candidate ABRs need to be ASBRs, or other routers may rightfully refuse to install translated type-5s LSAs. reported by dendroot@gmail.com. (ospf_abr_nssa_check_status) Detect change in translator state when ABR, and inc/dec redistribute count as when we leave/enter the disabled state - so that translate-enabled ABR properly sets ASBR bit on non-NSSA areas. Run the resulting function through indent to clean it up. * ospf_lsa.c: (router_lsa_flags) For purposes of ASBR bit, NSSA area is same as stub area.
2006-06-24[ospfd] Improve two info log messages in ospf_snmp.cAndrew J. Schorr
2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_snmp.c: (ospfTrapNbrStateChange, ospfTrapIfStateChange) Improve info log message to indicate why the trap is being sent.
2006-06-24[ospfd] When writing out config, show "debug ospf nsm status" properlyAndrew J. Schorr
2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_dump.c: (config_write_debug) Fix typo to show debug ospf nsm status properly (not ism status).
2006-06-18[ospfd] Fix ospf passive-interface subcommand to create interface if necessaryAndrew J. Schorr
2006-06-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_vty.c: ({no_,}ospf_passive_interface) Replace if_lookup_by_name with a call to if_get_by_name -- if the interface does not exist already, it should be created. And remove the obsolete warning message.
2006-06-15[redhat quagga.spec] Detect fedora release automaticallyAndrew J. Schorr
2006-06-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * redhat/quagga.spec.in: Get default distro automatically by using rpm to query the fedora-release version. And fix a typo (should be default_dist, not dist_default).
2006-06-15[ospfd] Fix multicast membership drop bugPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * Reported by Milan Koci * ospf_interface.h: (struct ospf_if_info) Add reference counts for multicast group memberships. Add various macros to help manipulate/check membership state. * ospf_interface.c: (ospf_if_set_multicast) Maintain the ospf_if_info reference counts, and only actually drop memberships if it hits 0, to avoid losing membership when OSPF is disabled on an interface with multiple active OSPF interfaces. * ospf_packet.c: (ospf_{hello,read}) Use the new macros to check/set multicast membership. * ospf_vty.c: (show_ip_ospf_interface_sub) ditto.
2006-06-15[zebra] Fix forgetfulness wrt configured address on FreeBSDPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * (general) The key fixes are actually Andrew Schorr's. * interface.c: (ip_address_uninstall) Unset the configured flag. * connected.c: (connected_same) new helper, check whether two connected are same. (connected_implicit_withdraw) new helper, consolidation of existing code in connected_add_ipv{4,6}. Try filter out unneeded Zserv address delete/adds when address is exact same. Where old address is implicitely removed, be sure to preserve the IFC_CONFIGURED flag if set, fixes bug where configured addresses were being lost on FreeBSD.
2006-06-15[zebra] remove internal if_flag_dump, use libzebras version.Paul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * lib/if.c: (if_flag_dump) remove the whitespace indentation, callers should provide. * zebra/interface.c: (if_flag_dump_vty) redundant code, remove. (if_dump_vty) use libzebra if_flag_dump.
2006-06-15[lib] list_delete shouldn't duplicate list_delete_all_nodePaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * linklist.c: (list_delete) call list_delete_all_node, don't duplicate it.
2006-06-15[lib] Experimental: have XFREE NULL out the freed pointerPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * memory.h: Experimental, have XFREE macro NULL out the freed pointer.
2006-06-15[lib] Fix vector leak in error path in command.c, CID #38Paul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * command.c: (cmd_describe_command_real) Fix leak, CID #38.
2006-06-15[ospfd] lsdb_delete/discard_from_db should be more robust to bad argsPaul Jakma
2006-05-31 Paul Jakma <paul.jakma@sun.com> * ospf_lsdb.c: (ospf_lsdb_delete) robustify against NULL arguments, print warning. * ospf_lsa.c: (ospf_discard_from_db) ditto. (ospf_maxage_lsa_remover) Check lsa->lsdb for validity, possible mitigation (but not solution) for bug #269.
2006-06-15[ospfd] suppres mostly uninteresting debug message unless debug is setPaul Jakma
2006-05-30 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_read) Debug message about packets received on unenabled interfaces should be conditional on debug being set.
2006-05-28[tests] Fix stray character in previous commitPaul Jakma
2006-05-28[tests] test-sig.c: configure loggingPaul Jakma
2006-05-28 Paul Jakma <paul.jakma@sun.com> * test-sig.c: (main) configure logging, there's no terminal to write to for one thing, but we do want stdout, and we don't want a test to spam syslog.
2006-05-28[lib] Add support for Sun libc printstack to zlog_backtrace_sigsafePaul Jakma
2006-05-28 Paul Jakma <paul.jakma@sun.com> * configure.ac: Check for Sun libc printstack(), add a general HAVE_STACK_TRACE define for lib/log.c, if any supported stack symbol dumping function is found (glibc backtrace/sun libc printstack). * log.c: (general) Add support for Sun libc printstack(). (hex_append) make the cpp conditional on general HAVE_STACK_TRACE define. (zlog_backtrace_sigsafe) Ditto. Add printstack() version of the the DUMP macro in this function.