Age | Commit message (Collapse) | Author |
|
BGP was ignoring nexthop info for static and other redistributed
routes for IPv6. Build extra attribute info to store the nexthop.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=6073
|
|
The old algorithim looked up every node twice as it withdrew
the entry. It looks up entry once in redistribute_withdraw, then
looks it up again info_delete. Use result of first lookup
to do the free directly.
This may explain the slow performance observed in
https://bugzilla.vyatta.com/show_bug.cgi?id=4421
|
|
Change sockunion_log() to not use strdup(). This fixes a small memory
leak that occurs on every failed connect(), and is simpler/cleaner.
|
|
The delete_hook was being run after calling access list delete function.
This would cause ospf to dereference a NULL, in ospf_filter_update
because 'access->name' was already freed.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=7654
|
|
this fixes commit b881c7074bb698aeb1b099175b325734fc6e44d2
|
|
|
|
bgp_bind_address is replaced with sockunion_bind.
|
|
if update-source was given as interface name, bgpd was unconditionally
trying to bind to an IPv4 address from that interface.
change function to find the best-matching (number of address bits)
same-family address on the interface.
|
|
prefix2sockunion converts a struct prefix* to a union sockunion *;
prefix_common_bits counts the number of common bits in the prefix's
address part.
|
|
* ospf6_message.c: (ospf6_packet_max): new function, return maximum IPv6
payload on an interface; (ospf6_hello_send, ospf6_dbdesc_send,
ospf6_dbdesc_send_newone, ospf6_lsreq_send, ospf6_lsupdate_send_neighbor,
ospf6_lsupdate_send_interface, ospf6_lsack_send_neighbor,
ospf6_lsack_send_interface): compare message size with the maximum
payload instead of the MTU.
|
|
|
|
To set the TOS bits on TCP connections, platforms that restrict
capabilities need the priv level to be raised before the sockopt
is set, and this requires the ZCAP_NET_ADMIN priv.
* bgp_main.c: update _caps_p to include ZCAP_NET_ADMIN
* bgp_network.c
* bgp_connect(): request ZPRIVS_RAISE/ZPRIVS_LOWER
* bgp_listener(): request ZPRIVS_RAISE earlier
|
|
Make ospf_flood() propagate error returned by ospf_lsa_install() further
to properly discard the malformed LSA, not just prevent the immediate
crash.
|
|
|
|
* bgp_attr.c (bgp_attr_originator_id, bgp_attr_cluster_list): provide
required arguments to bgp_attr_malformed()
|
|
* bgp_attr.c
* bgp_attr_aggregator(): check Optional/Transitive flag bits
|
|
Commit 05a4936b713b9882171d0f7fb20b8439df23939e fixed some of the
attributes involved, but not all. This commit should do it.
* bgp_attr.c
* bgp_attr_originator_id()
* bgp_attr_cluster_list()
* bgp_mp_reach_parse()
* bgp_mp_unreach_parse()
|
|
Some of the recent attribute flags/length checks copied from QRE use
bgp_notify_send_with_data() directly, but master branch assumes
using bgp_attr_malformed().
* bgp_attr.c
* bgp_attr_med()
* bgp_attr_local_pref()
* bgp_attr_atomic()
* bgp_attr_originator_id()
* bgp_attr_cluster_list()
* bgp_mp_reach_parse()
* bgp_mp_unreach_parse()
|
|
* bgp_attr.[ch]
* bgp_mp_reach_parse(): add extra arguments and a uniform flag
check block
* bgp_mp_unreach_parse(): idem
* bgp_attr_parse(): provide extra arguments
* bgp_mp_attr_test.c
* parse_test(): justify respective calls
|
|
|
|
* bgp_attr.c
* bgp_attr_cluster_list(): accept extra argument, add checks for
"optional", "transitive" and "partial" bits, log each error
condition independently
* bgp_attr_parse(): provide extra arguments
|
|
* bgp_attr.c
* bgp_attr_originator_id(): accept extra argument, add checks for
"optional", "transitive" and "partial" bits, log each error
condition independently
* bgp_attr_parse(): provide extra arguments
|
|
* extract.pl.in: use configured CPPFLAGS in cpp invocation.
|
|
|
|
IPv6 supports the same concept of differentiated service for routing
protocols as IPv4, but like too many things, the standards committee
decided that having two names for the same thing wasn't good enough and
introduced a third more generic term transport class.
The socket option to set transport class works the same as IPv4, but the
arguments are different.
* lib/sockopt.[ch]
* setsockopt_ipv6_tclass(): new function
* bgpd/bgp_network.c
* bgp_connect(): set socket option
* bgp_listener(): set socket option
* ospf6d/ospf6_network.c
* ospf6_set_transport_class(): new function
* ospf6_serv_sock(): set socket option
* ripngd/ripngd.c
* ripng_make_socket(): set socket option
|
|
Commit 2febf323411c1aed9d7694898f852ce2ef36a7e5 assumed every flag
bit except optional/transitive/partial unset, which at times could
not be true for "extended length" bit.
* bgp_attr.c
* bgp_attr_origin(): exclude BGP_ATTR_FLAG_EXTLEN from comparison
* bgp_attr_nexthop(): idem
* bgp_attr_med(): idem
* bgp_attr_local_pref(): idem
* bgp_attr_atomic(): idem
|
|
"While setting up a testbed, I ran across a little problem in the
parsing of the "graceful restart" BGP capability that resulted in
Quagga not actually activating it for the peer in question - when
the peer sent a single AFI/SAFI block."
* bgp_open.c
* bgp_capability_restart(): actually process the last AFI/SAFI block
|
|
* bgp_attr.c
* bgp_attr_parse(): provide extra argument to bgp_attr_aggregator()
* bgp_attr_local_pref(): use bgp_notify_send_with_data()
* bgp_attr_atomic(): idem
* bgp_attr_aggregator(): idem
Conflicts:
bgpd/bgp_attr.c
|
|
Do not check each of the Optional/Transitive/Partial attribute
flag bits, when their only valid combination is known in advance,
but still perform bit-deep error message logging. This change
assumes unused (low-order) 4 bits of the flag octet cleared.
* bgp_attr.c
* bgp_attr_origin(): rewrite check
* bgp_attr_nexthop(): idem
* bgp_attr_med(): idem
* bgp_attr_local_pref(): idem
* bgp_attr_atomic(): idem
Conflicts:
bgpd/bgp_attr.c
|
|
|
|
ORIGIN handling function used to have "partial" bit check and recent
commits added it for NEXT_HOP, MULTI_EXIT_DISC and ATOMIC_AGGREGATE
cases. This commit adds "partial" check for AS_PATH and LOCAL_PREF
cases, which should leave attributes 1 through 6 inclusive completely
covered with attribute flags checks.
* bgp_attr.c
* bgp_attr_origin(): use bit-by-bit checks for better diagnostics
* bgp_attr_aspath(): add flag check
* bgp_attr_local_pref(): idem
Conflicts:
bgpd/bgp_attr.c
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): new helper macro
* bgp_attr.c
* bgp_attr_nexthop(): add check for "partial" bit, refresh flag error
reporting, explain meaning of RFC4271 section 6.3 and implement it
Conflicts:
bgpd/bgp_attr.c
|
|
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use
that was never fully implemented, so it is deprecated by this
document.
* zebra.h: rename macro
* bgp_fsm.c: (bgp_graceful_restart_timer_expire,
bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update
* bgpd.c: (peer_nsf_stop): update
* bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case
any more
|
|
(with resolved conflict in bgpd/bgp_packet.c)
Two macros resolving to the same integer constant broke a case block and
a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was
performed.
* bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single
* macro
* bgp_capability_test.c: update test data
* bgp_mp_attr_test.c: idem
* bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update
macro and check conditions (where appropriate)
* bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send,
bgp_update_receive, bgp_route_refresh_receive): idem
* bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices,
bgp_open_capability_orf, bgp_open_capability): idem
* bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute,
bgp_packet_withdraw): idem
|
|
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659)
* bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
|
|
|
|
commit '717750433839762d23a5f8d88fe0b4d57c8d490a' causes SEGV error,
when 'oi = ospf_if_lookup_recv_if (ospf, iph->ip_src, ifp);' returns
NULL.
* ospf_packet.c
* ospf_read(): change a place of calling 'ospf_verify_header()'
|
|
|
|
* bgp_debug.c (bgp_notify_open_msg, bgp_notify_update_msg,
bgp_notify_cease_msg, bgp_notify_capability_msg): add messages for
"unspecific" subcode.
|
|
* log.[ch]
* mes_lookup: add a parameter with the name of the message list, print
the name in case of failure.
* LOOKUP macro: pass the name of the message list.
|
|
Other platform may have compatible facilities.
|
|
|
|
|
|
|
|
|
|
|
|
* ospf6_main.c: include required headers
* ospf6_asbr.h: idem
* ospf6_spf.c
* ospf6_spf_install(): remove unused variables
|
|
* ospf_spf.c
* ROUTER_LSA_TOS_SIZE: prepend OSPF_ and move to ospf_lsa.h
* ROUTER_LSA_MIN_SIZE: replace with existing OSPF_ROUTER_LSA_LINK_SIZE
|
|
(This commit is based on the patch from BZ#420, and should fix that bug.)
* configure.ac: detect availability of that API
* sockopt.c (setsockopt_ipv4_multicast): use it for join/leave IPv4
multicast groups
|
|
* sockopt.c (setsockopt_ipv4_multicast): check for wrong optname with
assert(), rather than return an error.
|