summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2003-06-25Add IPv6 ping and traceroute.hasso
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf_vty.c (ospf_area_stub_no_summary): fix typo. (ospf_area_nssa_cmd_handler): new function to handle the area.*nssa commands. (ospf_area_nssa_cmd): changed to call ospf_area_nssa_cmd_handler (ospf_area_nssa_translate_cmd) ditto (ospf_area_nssa_translate_cmd): changed from ALIAS to defun, call ospf_area_nssa_cmd_handler (ospf_area_nssa_translate_no_summary_cmd): ditto (no_ospf_area_nssa_cmd): call ospf_schedule_abr_task() (show_ip_ospf_area): Formatting cleanups. Properly print out NSSA area configuration. show_router_lsa_detail: Add missing newline (show_network_lsa_detail): ditto (show_summary_lsa_detail): ditto (show_summary_asbr_lsa_detail): ditto (show_ip_ospf_route_router): fix spacing (config_write_ospf_area): actually write out proper state for NSSA area.
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf_abr.c (ospf_abr_nssa_am_elected): new function. Look through LSDB for an area and try determine whether other routers are more 'electable' than this router. Presumes caller has checked Role. (ospf_abr_nssa_check_status): new function. check any NSSA related status changes. At present determines NSSATranslatorState should be enabled or disabled. (ospf_abr_announce_network_to_area): remove the redundant call to ospf_abr_announce_network_to_area() (as per Vadim, [zebra 14710], problem 7). (global): Update NSSATranslator to NSSATranslatorState as per ospfd.h changes (ospf_abr_announce_nssa_defaults): call ospf_abr_announce_network_to_area() to inject default summaries. (ospf_abr_nssa_task): undo commented out calls to ospf_abr_prepare_aggregates() and ospf_abr_send_nssa_aggregates(), if they're borked, lets fix them. (ospf_abr_task): remove call to ospf_abr_nssa_task() - move this to the timer scheduler. (ospf_abr_task_timer): call ospf_abr_nssa_task() and ospf_abr_nssa_check_status() (misc): some minor reformatting.
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospfd.c (ospf_area_nssa_set): Set defaults for NSSA Role, State and Stability Interval and no_summary. (ospf_area_nssa_translator_role_(un?)set): Update to NSSATranslatorRole
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospfd.h (struct ospf_area): remove NSSATranslator. Add NSSATranslatorState and NSSATranslatorStabilityInterval (currently not used). (global): add OSPF_NSSA_TRANS_STABLE_DEFAULT, default for NSSATranslatorStabilityInterval. Update the LSA_NSSA_GET to reflect struct ospf_area changes.
2003-06-222003-06-19 "Suraev, Vadim" <vadim.suraev@terayon.com>paul
* ospf_route.c: delete routes generated from AS-External routes if there is a inter/intra route. Adds ospf_route_delete_same_ext() which prunes external routes, which is called from ospf_route_install() when new route table is installed.
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf_lsa.h: elaborate on comment for ROUTER_LSA_NT add IS_ROUTER_LSA_NT macro.
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf_lsa.c (router_lsa_flags): Set the correct flags for router-lsa's. Eg OSPF_FLAG_ASBR is /not/ an LSA flag, its an internal ospfd flag (just happens to have same value as ROUTER_LSA_EXTERNAL). Set ROUTER_LSA_EXTERNAL for ASBRs, ROUTER_LSA_BORDER for ABRs and ROUTER_LSA_NT for NSSA ABRs which are OSPF_NSSA_ROLE_ALWAYS translators.
2003-06-222003-06-19 "Suraev, Vadim" <vadim.suraev@terayon.com>paul
* ospf_interface.c (ospf_vl_set_params): new router LSA is not generated when the cost of the routing entry for the virtual link endpoint has changed. If the cost to reach the virtual link's endpoint has changed, add router LSA timer for the backbone area.
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf_dump.h: fix NSSA debug define
2003-06-202003-06-20 Paul Jakma <paul@dishone.st>paul
* *.texi: update the docs a bit. Add some info about zebra.dishone.st in the overview. Add link-detect and update static routes section in zebra. Add write-config in vtysh. Update version handling and add passive-interface default for ripd.
2003-06-202003-06-20 Paul Jakma <paul@dishone.st>paul
* rip_interface.c: add 'default' to passive-interface command DEFUN
2003-06-192003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf6d/ospf6_message.c: Change memcpy() to strcpy() to prevent copying of extraneous junk - suggested by Anil Madhavapeddy <anil@recoil.org> on bug-zebra@gnu.org.
2003-06-192003-06-19 Paul Jakma <paul@dishone.st>paul
* ospfd/ospf_zebra.c: Run it through indent -nut to fix the $%^@ing annoying mix of tabs and spaces.
2003-06-192003-06-19 Vladimir Ivaschenko <hazard@francoudi.com>paul
* ospfd/ospf_zebra.c: [zebra 19434] fix for disappearing OSPF routes modify ospf_zebra_delete() to specify nexthop when deleting routes with zebra.
2003-06-192003-06-19 Vladimir Ivaschenko <hazard@francoudi.com>paul
* zebra/rt_netlink.c: Debug statements added to netlink_route_multipath() * zebra/zebra_rib.c: If route has a gateway, delete only existing route with that specified gateway.
2003-06-192003-06-19 Paul Jakma <paul@dishone.st>paul
* Fix lib/smux.c's reliance on daemons exporting struct thread_master *master.
2003-06-192003-06-19 Paul Jakma <paul@dishone.st>paul
* ospfd/ospf_packet.c: Fix typos, extra squiggly bracket. Note to self: in future make sure that when you test compile a change you actually have the relevant configure options enabled.
2003-06-192003-06-19 Paul Jakma <paul@dishone.st>paul
* ospfd/ospf_packet.c: Update Hasso's hack slightly, add comment elaborating on Hasso's, use the SET/CHECK_FLAG macros.
2003-06-152003-06-15 Paul Jakma <paul@dishone.st>paul
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global, pass the thread master in explicitly to vty_init. Sort out some header dependency problems with lib/command.h * zebra/: Move globals to struct zebrad. Update vty_init(). * (.*)/\1_main.c: update call to vty_init().
2003-06-122003-06-12 Paul Jakma <paul@dishone.st>paul
* zebra/ioctl.c: Properly zero-out struct ifreq before passing it to the SIOCSIFFLAGS ioctl(2), so that it doesn't occasionally trigger promisc mode on interface. Reported/tested by: Vladimir B. Grebenschikov <vova@sw.ru> (patch snarfed taken from FreeBSD ports)
2003-06-112003-06-11 Paul Jakma <paul@dishone.st>paul
* bgpd/ChangeLog: Update (wasnt commited with the fix)
2003-06-112003-06-11 Paul Jakma <paul@dishone.st>paul
* lib/privs.h (zprivs_init): do not use zlog() as it depends on vty having been initialised (zlog calls vty_log). print to stderr directly instead.
2003-06-092003-06-09 Paul Jakma <paul@dishone.st>paul
* bgp_clist.c (community_list_delete): honour deny statements
2003-06-082003-06-08 Paul Jakma <paul@dishone.st>paul
Compile and warning fixes for the ripd 'passive-interface default' patch.
2003-06-072003-06-07 Paul Jakma <paul@dishone.st>paul
* (bgp_clist.c): Run it through indent -nut (all indentation to be spaced, get rid of mix of tabs and spaces)
2003-06-07From: Andrew J. Schorr <aschorr@telemetry-investments.com>paul
Subject: [zebra 12403] patch for ripd to accept any version of RIP by default The default Cisco IOS behavior is to send RIP version 1 packets and receive version 1 and version 2 packets. But zebra version 0.92a sends and receives only version 2 packets by default. I have patched the code to change zebra's default behavior to sending version 2 packets (same as before) but receiving both versions. While this is still not identical to Cisco's behavior, it does now accept packets of both versions and retains backwards compatibility with zebra configurations.
2003-06-07From: Andrew J. Schorr <aschorr@telemetry-investments.com>paul
Subject: [zebra 12406] patch for ripd to support "passive-interface default" behavior In Cisco IOS, the router rip passive-interface subcommand can accept an interface name of "default". In that cases, all interfaces are set to be passive by default, and you must explicitly make it non-passive by using the "no passive-interface <ifname>" command if you want updates to go to that interface. <command implemented for zebra>
2003-06-072003-06-07 Paul Jakma <paul@dishone.st>paul
* (zebra/rtadvc.): can not set checksum for ICMPV6, see: From: Jun-ichiro itojun Hagino <itojun@iijlab.net> Subject: [zebra 11052] setsockopt(IPV6_CHECKSUM) does not work for ICMPv6 socket setsockopt(IPV6_CHECKSUM) does not work for ICMPv6 socket. RFC2292 may not be clear enough about it (it talks about raw socket and ICMPv6 socket mixed up), but the next revision (draft-ietf-ipngwg-rfc2292bis-02.txt) is very clear about it. > An attempt to set IPV6_CHECKSUM for an ICMPv6 socket will fail.
2003-06-062003-06-07 Paul Jakma <paul@dishone.st>paul
* (ospf_spf.c): Fix indentation - primarily the mix of tabs and spaces. Ran through indent -nut (GNU style, but only spaces for indentation)
2003-06-062003-06-07 Paul Jakma <paul@dishone.st>paul
* Revert Cougar's sort interface names patch, causes problems with enabling of interfaces for OSPF in ospfd.
2003-06-062003-06-7 kamatchi soundaram <kamatchi@tdd.sj.nec.com>paul
* (ospf_spf.c): Fix consideration of costs for PtP nexthops in ospf_nexthop_calculation().
2003-06-062003-06-06 Paul Jakma <paul@dishone.st>paul
* Fix up defaults for --enable-{user,group}
2003-06-062003-06-06 Paul Jakma <paul@dishone.stpaul
* Fix up case of --enable-vty-group not being specified
2003-06-05Patch from Cougar - sort iflist by name.hasso
2003-06-05Unbreak router advertisment feature when using capabilities.hasso
2003-06-04Paul forgot probably to commit privs.[c|h] changes. Had to reorder includeshasso
in zebra.h to make it compile in debian.
2003-06-042003-06-04 Paul Jakma <paul@dishone.st>paul
* Merge of zebra privileges
2003-06-042003-06-04 Paul Jakma <paul@dishone.st>paul
* (configure.in): removed * (configure.ac): Fixes/cleanups backported from zprivs branch AC_DEFINE templates added, Indentation of nested macros, IPv6 checks changed from independent if..fi blocks to if...elif...fi., Merge piddir and ac_sockdir into one ac_statedir, Remove world writeable dirs as candidates for ac_statedir, ERROR out if no state dir is found or --localstatedir not specified,
2003-06-042003-06-04 Paul Jakma <paul@dishone.st>paul
* (Makefile.am): doc should be a SUBDIR. Specify DIST_SUBDIRS to remove dependence of make dist on configure options. Add doc/mpls to EXTRA_DIST. redhat/ does not need a dist-hook, its already in SUBDIR. Remove CVS/ dir from the dist doc/.
2003-06-04Paul Jakma:paul
lib/debug.{c,h}: glibc backtrace printing function (from the glibc info page) configure.ac: check for glibc backtrace and set define lib/zebra.h: glibc backtrace support
2003-06-04Paul Jakma: acconfig.h is deprecated.paul
2003-06-04Ignore dist tar filepaul
2003-06-04From: kamatchi soundaram <kamatchi@tdd.sj.nec.com>paul
Subject: [zebra 19263] Another memory leak!! is zebra OSPF This memory leak gets into picture whenever any interface goes down. Problem found and desctription: Whenever the interface goes down, the "def_params" (member of ospf_if_info) structure memory is not freed. Fix made: added the following line to free the "def_params" memory of ospf_if_info before calling the "XFREE(MTYPE_OSPF_IF_INFO, ifp->info);" The added line is: ospf_del_if_params ((struct ospf_if_params *) IF_DEF_PARAMS (ifp));
2003-06-04From: kamatchi soundaram <kamatchi@tdd.sj.nec.com>paul
Subject: [zebra 19262] Re: Memory leak in OSPF Fix applied for Kamatchi's original report was to remove the auth_crypt initialisation from the wrong function. This should fix that.
2003-06-03From: kamatchi soundaram <kamatchi@tdd.sj.nec.com>paul
Subject: [zebra 19259] Memory leak in OSPF The detail of the memory leak follows: File name: ospf_interface.c Function name: ospf_if_new_hook(). Type of leak: Overwriting the already allocated memory. Problem found and description: The ospf_new_if_params() fn allocates a memory for "auth_crypt" which is overwritten, down in the fn (ospf_if_new_hook) by explicitely allocating a memory for the same "auth_crypt". Fix: remove allocation from ospf_new_if_params()
2003-06-02Apply redistribution route-map's correctly.hasso
2003-05-29Commit my hack to fix options mismatch in NSSA area DD packets. It shouln'thasso
harm, but of course ... it is hack.
2003-05-29ospfd/ospfd.h: Change delay and holdtime to 1s. More appropriate values forpaul
the class of machines which zebra runs on than the original defaults which were taken from IOS (and even IOS uses much lower times these days). Lower values greatly help with convergence. Ideally, we'd use even lower times, but thread_add_timer() api will need to be modified to use milliseconds. (eg JunOS uses 100ms for delay, and 700ms for hold time, iirc from Hasso).
2003-05-29lib/table.c: Fix the SET_LINK macro. (not that its of any worth)paul