| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* ospf_packet.c: (ospf_recv_packet) use stream_recvmsg.
2005-02-11 Hasso Tepper <hasso at quagga.net>
* ospf_lsdb.c: Fix sum of checksums calculation.
2005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the
error message.
2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_interface.h: Reduce structure padding by putting new u_char
field multicast_memberships in a better spot (grouped with
other u_char fields type and state).
2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
2005-02-08 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
2005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_network.c: (ospf_sock_init) Save errno before calling
ospfd_privs.change.
2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print
an error message and return.
(ospf_read) If the interface state is ISM_InterfaceDown, issue
a warning message and ignore the packet.
2005-01-10 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_packet.h: Remove commented out definition of
OSPF_MAX_PACKET; neither it or the uncommented one are used any more.
* ospf_packet.c (ospf_make_ls_upd): Leave room for authentication
when deciding if an update will fit.
(ospf_packet_authspace): Factor out calculation of size required
for authentication.
(ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET.
Don't confuse readers that there is a macro.
2004-12-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_network.c: Improve all setsockopt error messages to give detailed
information on the arguments.
2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done"
messages from LOG_WARNING to LOG_INFO, since this seems to be
normal.
2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_read) Always look up the interface if
ospf_recv_packet returns NULL ifp, since some platforms such
as Solaris 8 appear to support ifindex retrieval but don't.
2004-12-22 Hasso Tepper <hasso at quagga.net>
* ospf_dump.c: Show debug configuration in vtysh.
* ospf_vty.c: Fix "show ip ospf" output. Router can't be elected in
any case if it's configured as "translate-never".
* ospf_lsdb.[ch]: New function to calculate sum of checksums.
* ospf_vty.c: Bugfix to show really number of AS external LSAs, not
number of all LSAs with AS scope, this includes opaque as LSAs as
well, show this number separately. Show numbers and sums of
checksums for each type of LSAs.
* ospf_lsa.c: Calculate checksum before putting LSA into database.
2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_interface.h: Declare new function ospf_default_iftype.
* ospf_interface.c: (ospf_default_iftype) New function to centralize
this logic in one place.
* ospf_zebra.c: (ospf_interface_add) Use new function
ospf_default_iftype.
* ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic
by using new function ospf_default_iftype.
2004-12-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc) Should be static, not global.
(ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning
messages to include identifying information (e.g. router id).
* ospf_nsm.c: (nsm_change_state) Improve info message to include
router id and state names.
2004-12-09 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_apiserver.c (ospf_apiserver_term): Obtain struct
ospf_apiserver * from listnode. Remove unused variables. Follows
suggestion from Jay Fenlason.
2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* *.c: Change level of debug messages to LOG_DEBUG.
2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message
from LOG_NOTICE to LOG_DEBUG.
2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
2004-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning
message and in comment.
(ospf_db_desc) Warning message that a packet is being discarded
should give the router id of the packet source. Fix spelling
of packet in two warning messages.
(ospf_ls_req) Warning message that a link state request is being
discarded should give the router id of the neighbor that sent it.
2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_main.c: Remove #include "debug.h" (was not being used, and
lib/debug.h has now been deleted).
2004-11-25 Hasso Tepper <hasso at quagga.net>
* ospf_main.c: Make group to run as configurable.
2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_packet.c (ospf_recv_packet): Assume CMSG_SPACE is present
and works (lib/zebra.h provides if OS doesn't).
2004-11-15 Paul Jakma <paul@dishone.st>
* ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock.
2004-11-12 Paul Jakma <paul@dishone.st>
* ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to
ignore stub area summary default. Even so it seems a strange
check, add a comment to that effect.
2004-11-04 Paul Jakma <paul@dishone.st>
* ospfd.c: (ospf_network_match_iface) revert to previous network
statement match behaviour.
2004-11-02 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points
to it. Add convenience pointer to msg->msg_iov[1], and use this,
fixing the unfortunate borkenness introduced in moving of this code
to a function.
(ospf_write) remove iovp and fix up call to previous.
(ospf_ls_upd_packet_new) cast size to long int - unfortunately
glibc's size_t format modifier is not portable.
2004-10-31 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_write_frags) Add debug output
(ospf_write) set type early, so we can pass it to
ospf_write_frags.
(ospf_ls_upd_packet_new) print size in debug output when too large
packet is encountered.
* ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of
THREAD_ARG to store an integer, but it should at least use same
same type to retrieve the value. Assert value is sane.
2004-10-22 Paul Jakma <paul@dishone.st>
* ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex()
function.
* ospf_packet.c: (ospf_read) manually look up ifindex
if system could not have returned one, eg openbsd, thanks to Rivo
Nurges for highlighting problem and fix.
Change setsockopt_pktinfo to setsockopt_ifindex.
2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com>
* ospf_snmp.c: (ospf_snmp_if_update) Fix logic to handle PtP links
with dedicated subnets properly.
* ospf_lsa.c: (lsa_link_ptop_set) ditto.
* ospfd.c: (ospf_network_match_iface) ditto.
(ospf_network_run) ditto.
* ospf_interface.c: (ospf_if_is_configured) ditto.
(ospf_if_lookup_by_prefix) ditto.
(ospf_if_lookup_recv_if) ditto.
* ospf_vty.c: (show_ip_ospf_interface_sub) Display the peer or
broadcast address if present.
2004-10-13 Hasso Tepper <hasso at quagga.net>
* ospf_main.c: Unbreak compilation with ospfapi disabled.
* ospf_snmp.c: Remove defaults used to initialize smux connection to
snmpd. Connection is initialized only if smux peer is configured.
2004-10-12 Hasso Tepper <hasso at quagga.net>
* ospf_main.c, ospf_opaque.c: Unbreak ospfclient compilation - move
static variable from ospf_main.c into ospf_opaque.c.
2004-10-11 Hasso Tepper <hasso at quagga.net>
* ospf_main.c, ospf_opaque.c: Disable ospfapi init by default. New
command line switch to enable it.
2004-10-11 Paul Jakma <paul@dishone.st>
* ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order
remove ntohs that should have dissappeared. Take struct ip
as argument, caller has to know there's an IP header at start of
stream anyway.
* ospf_dump.h: update declaration of ospf_ip_header_dump.
* ospf_packet.c: (ospf_write) correct call to
sockopt_iphdrincl_swab_htosys which was munging the header.
(ospf_recv_packet) ip_len is needed for old OpenBSD fixup.
(ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as
we have it.
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
2004-10-08 Hasso Tepper <hasso at quagga.net>
* *.[c|h]: Fix compiler warnings: make some strings const, signed ->
unsigned, remove unused variables etc.
2004-10-07 Greg Troxel <gdt@claude.ir.bbn.com>
* ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't
use of variable names 'node' and 'nextnode' to avoid possible
conflict with list macros. Move variable declaration inside for
loop after a statement to top of function.
2004-10-07 Paul Jakma <paul@dishone.st>
* ospf_snmp.c: Missed list typedef update
* ospf_dump.c: Include sockopt.h for header swab functions.
2004-10-05 Paul Jakma <paul@dishone.st>
* ospf_packet.c: replace ospf_swap_iph_to... with
sockopt_iphdrincl_swab_...
2004-10-03 James R. Leu <jleu at mindspring.com>
* ospf_zebra.c: Read router id related messages from zebra daemon.
Schedule router-id update thread if it's changed.
* ospfd.c: Remove own router-id selection function. Use router id from
zebra daemon if it isn't manually overriden in configuration.
2004-09-27 Paul Jakma <paul@dishone.st>
* ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER
Apply to offset too. Print ip_cksum, lets not worry about
possible 2.0.37 compile problems.
* ospf_packet.c: (ospf_swap_iph_to{n,h}) Use
HAVE_IP_HDRINCL_BSD_ORDER.
(ospf_recv_packet) ditto.
(ospf_write) Fixup iov argument to ospf_write_frags.
(struct msghdr).msg_name is caddr_t on most platforms.
(ospf_recv_packet) ditto. And msg_flags is not always there
memset struct then set fields we care about rather than
initialise all fields individually.
2004-09-26 Hasso Tepper <hasso at quagga.net>
* ospf_abr.c, ospf_dump.c, ospf_lsa.c, ospf_packet.c, ospf_vty.c,
ospf_zebra.c: Fix compiler warnings.
2004-09-24 Paul Jakma <paul@dishone.st>
* ospf_apiserver.{c,h}: lists typedef removal cleanup.
update some list loops to LIST_LOOP. some miscellaneous indent
fixups.
(ospf_apiserver_unregister_opaque_type) fix listnode_delete of
referenced node in loop.
(ospf_apiserver_term) loops calling ospf_apiserver_free, which
deletes referenced nodes from apiserver_list, fixed.
* ospf_interface.h: lists typedef removal cleanup.
* ospf_opaque.{c,h}: lists typedef removal cleanup. update some list
loops to LIST_LOOP. miscellaneous style and indent fixups.
* ospf_te.{c,h}: ditto
* ospf_packet.c: lists typedef removal cleanup.
(ospf_write) ifdef fragmentation support. move actual
fragmentation out to a new, similarly ifdefed, function.
(ospf_write_frags) fragmented write support, moved from previous.
2004-09-23 Hasso Tepper <hasso at quagga.net>
* *.[c|h]: list -> struct list *, listnode -> struct listnode *.
2004-09-12 Paul Jakma <paul@dishone.st>
* ospf_packet.c: Fix bugzilla #107
(ospf_packet_max) get rid of the magic 88 constant
(ospf_swab_iph_ton) new function. set ip header to network order,
taking BSDisms into account.
(ospf_swab_iph_toh) the inverse.
(ospf_write) Add support for IP fragmentation, will only work on
linux though, other kernels make it impossible. get rid of the
magic 4 constant.
(ospf_make_ls_upd) Bound check to end of stream, not to
interface mtu.
(ospf_ls_upd_packet_new) New function, allocate upd packet
taking oversized LSAs into account.
(ospf_ls_upd_queue_send) use ospf_ls_upd_packet_new to allocate,
rather than statically allocating mtu sized packet buffer, which
actually was wrong - it didnt take ip header into account, which
should not be included in packet buffer.
(ospf_ls_upd_send_queue_event) minor tweaks and remove
TODO comment.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_spf.c (ospf_spf_calculate): Many more comments and debug
print statements. New function ospf_vertex_dump used in debugging.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_spf.h (struct vertex): Comments for flags and structure members.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_route.c: When finding an alternate route, log cost as well.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_interface.c (ospf_lookup_if_params): Initialize af in
struct prefix allocated on stack.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_packet.c (ospf_ls_ack_send_delayed): In p2mp mode, send
acks to AllSPFRouters, rather than All-DR.
2004-08-27 Hasso Tepper <hasso at quagga.net>
* ospf_vty.c: Don't print ospf network type under interface only
if interface is in broadcast mode and interface type really is
broadcast. Fixes Bugzilla #108.
2004-08-27 David Wiggins <dwiggins@bbn.com>
* ospf_spf.c (ospf_nexthop_calculation): Initialize address family
in on-stack struct prefix_ipv4. Fixes point-to-multipoint SPF
calculation.
2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_packet.c (ospf_recv_packet): adjust size declaration of
buffer used to get interface index so that it compiles on other
than Linux and includes the required alignment space. Probably
this was only working on sparc/sparc64 because most of
sockaddr_dl was not being written.
2004-08-19 Paul Jakma <paul@dishone.st>
* ospf_packet.c: update to match sockopt renames.
2004-08-04 Paul Jakma <paul@dishone.st>
* ospf_spf.c: (ospf_spf_consider_nexthop) Add comment about issue.
Compare only against list head - all nexthops must be same cost
anyway, fixes a reference-listnode-after-delete bug noted by
Kir Kostuchenko.
(ospf_nexthop_calculation) Use ospf_spf_consider_nexthop for all
candidates attached to root.
2004-07-27 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_ls_upd_send_queue_event) fix thinko from
last fix for ospfd wedging due to oversize LSAs: dont list loop on
ospf_ls_upd_queue_send() - guaranteed segfault.
2004-07-27 Paul Jakma <paul@dishone.st>
* ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out
the LSA as then free_opaque_info_per_id() can never unlock (and
free) the LSA. Reported by Gunnar Stigen.
2004-07-23 Paul Jakma <paul@dishone.st>
* ospf_network.c: Replace PKTINFO/RECVIF with call to
setsockopt_pktinfo
* ospf_packet.c: Use getsockopt_pktinfo_ifindex and
SOPT_SIZE_CMSG_PKTINFO_IPV4.
2004-07-14 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for
problem reported by Peter Frost amongst others, where function
will spin indefinitely if update list contains LSAs greater than
MTU-headers or other condition leading to update list never being
cleared. Problem of what to do with these LSAs remains.
(ospf_make_ls_upd) add comment about large LSA problem,
indentation cleanup.
2004-07-01 Greg Troxel <gdt@fnord.ir.bbn.com>
* Makefile.am (lib_LTLIBRARIES): make libospf shared
2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com>
* Makefile.am: Add shlib support.
2004-06-10 Hasso Tepper <hasso@estpak.ee>
* *: Removed ifdefs HAVE_NSSA.
2004-06-06 Paul Jakma <paul@dishone.st>
* ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous.
ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format
2004-05-31 Sagun Shakya <sagun.shakya@sun.com>
* ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if
index is out of range.
ospf_flood.c: endianness fix
ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum
in various places.
2004-05-10 Hasso Tepper <hasso@estpak.ee>
* ospf_zebra.c, ospfd.c: Move ospf_prefix_list_update() function
to ospf_zebra.c from ospfd.c and add redistribution updates if
route-map is used in redistribution.
* ospf_main.c: Remove now useless call to ospf_init().
2004-05-08 Paul Jakma <paul@dishone.st>
* ospf_zebra.c: Sync with lib/zclient changes
2004-05-05 Paul Jakma <paul@dishone.st>
* ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is
defined. Warn at compile and runtime. Use
IPTOS_PREC_INTERNETCONTROL otherwise.
* ospf_packet.c: (ospf_associate_packet_vl) cleanup, move
some of the checks up to ospf_read, return either a
virtual link oi, or NULL.
(ospf_read) Cleanup, make it responsible for checks. Remove
the nbr lookup - moved to ospf_neighbor. Adjust all nbr
lookups to use new wrappers exported by ospf_neighbor.
* ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup.
* ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface
neighbour table by router-id for virtual-link ospf_interfaces,
not by peer_addr (which breaks for asymmetric vlinks)
(ospf_nbr_lookup) add a wrapper for nbr lookups to deal with
above.
* ospf_interface.c: (ospf_vl_set_params) Catch changes of interface
address for either end of a virtual-link, and hence potential cost
changes.
2004-04-22 Hasso Tepper <hasso@estpak.ee>
* ospf_zebra.c: Don't ignore reject/bh routes, it's the only way
to "summarize" routes in ASBR at the moment.
2004-04-20 Hasso Tepper <hasso@estpak.ee>
* ospfd.c: Unset NP flag if area is going to be normal or stub.
Fixes UNH OSPF_NSSA.1.2a comment.
* ospf_abr.c: Originate default into stub/nssa area even if
summaries are disabled.
* ospf_zebra.c: Don't attempt to redistribute 127.0.0.0/8.
2004-04-19 Hasso Tepper <hasso@estpak.ee>
* ospf_vty.c: Don't warn that export- and import-list can't be
configured to backbone area if they are applied and are working
fine.
2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com>
* ospf_packet.c: Don't drop packets in Solaris x86.
[quagga-dev 1005].
2004-03-18 Amir Guindehi <amir@datacore.ch>
* ospf_opaque.c: Attempt to correct the incorrect behavior of
Quagga's ospfd in the special situation that a node's opaque
capability has changed as "ON -> OFF -> ON". [quagga-dev 843].
2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com>
* ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range
should be configured with the highest cost path within the range,
not lowest.
2004-02-17 Paul Jakma <paul@dishone.st>
* ospf_zebra.c: (ospf_interface_delete) Do not delete the interface
params, nor the interface structure, if an interface delete
message is received from zebra.
* ospf_interface.c: (ospf_if_delete_hook) Delete the interface
params and interface, ie that which was previously removed in
(ospf_interface_delete) above.
2004-02-11 Hasso Tepper <hasso@estpak.ee>
* ospf_interface.c, ospf_zebra.c: Don't attempt to read path->oi->ifp
if oi doesn't exist any more.
2004-02-11 Vadim Suraev <vadim.suraev@terayon.com>
* ospf_packet.c (ospf_ls_upd): Router should flush received network
LSA if it was originated with older router-id ([zebra 14710] #6).
2003-12-08 Mattias Amnefelt <mattiasa@kth.se>
* ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len
network byte order.
2003-12-05 Greg Troxel <gdt@poblano.ir.bbn.com>
* ospfd.c (ospf_network_match_iface): Rewrite code for clarity
while trying not to change semantics. Add ifdefed-out code to
avoid matching ppp interfaces whose destination address does not
also match the prefix under consideration, to help out people with
problems due to as-yet-unfixed bugs with p2p interfaces coming and
going.
2003-07-25 kamatchi soundaram <kamatchi@tdd.sj.nec.com>
* ospf_packet.c (ospf_ls_upd_send_queue_event): get next route
node in body of the loop to avoid chance that route node
is unlocked and deleted before the next iteration tries to
get next route node.
2003-05-24 Kenji Yabuuchi
* ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific
match for interface lookup.
2003-05-18 Hasso Tepper <hasso@estpak.ee>
* ospf_vty.c: Show NSSA LSA route info in "show ip ospf database"
output
2003-05-16 Hasso Tepper <hasso@estpak.ee>
* ospf_lsa.c: Fix handling of NSSA
2003-04-23 Hasso Tepper <hasso@estpak.ee>
* ospf_vty.c: fix "router xxx" node commands in vtysh
2003-04-19 Hasso Tepper <hasso@estpak.ee>
* {ospf_abr,ospfd}.c: area id's DECIMAL -> ADDRESS
* ospf_routemap.c: sync daemon's route-map commands to have same
syntax.
2003-04-19 Sergey Vyshnevetskiy <serg@vostok.net>
* ospf_packet.c: Add missing param to zlog
* ospf_flood.c: remove unused vars
2003-04-17 Denis Ovsienko <zebra@pilot.org.ua>
* ospf_interface.c: fix incorrect memset
2003-04-10 Amir Guindehi <amir@datacore.ch>
* ospf_lsa.[ch]: opaque LSA fix, use ospf_lookup.
2003-04-03 David Watson <dwatson@eecs.umich.edu>
* ospf_lsa.c: byte order fix
2002-03-17 Amir Guindehi <amir@datacore.ch>
* ospf_apiserver.[ch]: Merge Ralph Keller's OSPFAPI support.
* ospf_api.[ch]: Merge Ralph Keller's OSPFAPI support.
* ospfclient: OSPFAPI demonstration client.
2003-01-23 Masahiko Endo <endo@suri.co.jp>
* ospf_ism.c: NSM event schedule bug fix.
2002-10-30 Greg Troxel <gdt@ir.bbn.com>
* ospf_packet.c (ospf_make_md5_digest): MD5 length fix.
2002-10-23 endo@suri.co.jp (Masahiko Endo)
* ospf_opaque.c: Update Opaque LSA patch.
2002-10-23 Ralph Keller <keller@tik.ee.ethz.ch>
* ospf_vty.c (show_ip_ospf_database): Fix CLI parse.
2002-10-23 Juris Kalnins <juris@mt.lv>
* ospf_interface.c (ospf_if_stream_unset): When write queue
becomes empty stop write timer.
2002-10-10 Greg Troxel <gdt@ir.bbn.com>
* ospf_packet.c (ospf_check_md5_digest): Change >= to > to make it
conform to RFC.
2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.93 released.
2002-06-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_spf.c (ospf_nexthop_calculation): Add NULL set to oi and
check of l2. Reported by: Daniel Drown <dan-zebra@drown.org>
(ospf_lsa_has_link): LSA Length calculation fix. Reported by:
Paul Jakma <paulj@alphyra.ie>.
* ospfd.c (ospf_if_update): Fix nextnode reference bug. Reported
by: juris@mt.lv.
2002-01-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospfd.c: Merge [zebra 11445] Masahiko ENDO's Opaque-LSA support.
2001-08-27 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_interface.c (ospf_add_to_if): Use /32 address to register
OSPF interface information.
(ospf_delete_from_if): Likewise.
* ospf_zebra.c (ospf_interface_address_delete): Likewise.
2001-08-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_zebra.c (ospf_redistribute_unset): When redistribute type
is OSPF, do not unset redistribute flag.
2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.92a released.
2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.92 released.
2001-08-12 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospfd.c (ospf_config_write): auto-cost reference-bandwidth
configuration display.
2001-07-24 David Watson <dwatson@eecs.umich.edu>
* ospf_spf.c (ospf_spf_next): Modify ospf_vertex_add_parent to
check for an existing link before connecting the parent and child.
ospf_nexthop_calculation is also modified to check for duplicate
entries when copying from the parent. Finally, ospf_spf_next
removes duplicates when it merges two equal cost candidates.
2001-07-23 itojun@iijlab.net
* ospfd.c (show_ip_ospf_neighbor): Check ospf_top before use it
[zebra 8549].
2001-07-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_packet.c (ospf_write): Remove defined(__OpenBSD__) to make
it work on OpenBSD.
2001-06-26 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_zebra.c (config_write_ospf_default_metric): Display
default-metric configuration.
2001-06-18 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_ia.h (OSPF_EXAMINE_SUMMARIES_ALL): Remove old macros.
2001-05-28 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_snmp.c (ospfIfEntry): Fix interface lookup bug to avoid
crush.
(ospfIfMetricEntry): Likewise.
2001-03-18 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_read): Fix typo. Reported by: "Jen B
Lin'Kova" <jen@stack.net>.
2001-03-15 Gleb Natapov <gleb@nbase.co.il>
* ospf_interface.c (ip_ospf_network): Set interface parameter.
(interface_config_write): Add check for OSPF_IFTYPE_LOOPBACK.
* ospf_zebra.c (ospf_interface_add): Set interface parameter.
2001-02-21 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_recv_packet): Solaris also need to add
(iph.ip_hl << 2) to iph.ip_len.
2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospfd.h (OSPF_LS_REFRESH_TIME): Fix OSPF_LS_REFRESH_TIME value.
Suggested by: David Watson <dwatson@eecs.umich.edu>.
* ospf_zebra.c (zebra_init): Remove zebra node.
* ospfd.c (ospf_area_range_set): Function name is changed from
ospf_ara_range_cmd.
(ospf_area_range_unset): New function which separated from DEFUN.
New commands are added:
"no area A.B.C.D range A.B.C.D/M advertise"
"no area <0-4294967295> range A.B.C.D/M advertise"
"no area A.B.C.D range A.B.C.D/M not-advertise"
"no area <0-4294967295> range A.B.C.D/M not-advertise"
* ospf_lsa.c (ospf_lsa_more_recent): Fix previous change.
2001-02-08 Matthew Grant <grantma@anathoth.gen.nz>
* ospf_network.c (ospf_if_add_allspfrouters): Use
setsockopt_multicast_ipv4.
(ospf_if_drop_allspfrouters): Likewise.
* ospf_lsa.c (ospf_router_lsa_install): Add rt_recalc flag.
(ospf_network_lsa_install): Likewise.
(ospf_summary_lsa_install): Likewise.
(ospf_summary_asbr_lsa_install): Likewise.
(ospf_external_lsa_install): Likewise.
(ospf_lsa_install): Call ospf_lsa_different to check this LSA is
new one or not.
2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_zebra.c (ospf_interface_delete): Do not free interface
structure when ospfd receive interface delete message to support
pseudo interface.
2001-02-01 Dick Glasspool <dick@ipinfusion.com>
* ospfd.c (area_range_notadvertise): Change area range "suppress"
command to "not-advertise".
* ospfd.h (OSPF_LS_REFRESH_TIME): Change OSPF_LS_REFRESH_TIME from
1800 to 60.
* ospf_abr.c (ospf_abr_update_aggregate): When update_aggregate is
updating the area-range, the lowest cost is now saved.
* ospf_lsa.c (ospf_lsa_more_recent): Routing to compare sequence
numbers rather than creating overflow during calculation.
2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* zebra-0.91 is released.
2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_db_desc_proc): Do not continue process when
NSM_SeqNumberMismatch is scheduled.
(ospf_ls_req): Free ls_upd when return from this function.
(ospf_ls_upd_timer): When update list is empty do not call
ospf_ls_upd_send(). Suggested by: endo@suri.co.jp (Masahiko
Endo).
2001-01-26 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_lsa.c (ospf_maxage_flood): Flood LSA when it reaches
MaxAge. RFC2328 Section 14.
(ospf_maxage_lsa_remover): Call above function during removing
MaxAge LSA.
2001-01-26 Dick Glasspool <dick@ipinfusion.com>
* ospf_flood.c (ospf_flood_through_as): Function is updated for
NSSA Translations now done at ospf_abr.c with no change in P-bit.
* ospf_lsa.c (ospf_get_nssa_ip): Get 1st IP connection for Forward
Addr.
(ospf_install_flood_nssa): Leave Type-7 LSA at Lock Count = 2.
* ospf_ase.c (ospf_ase_calculate_route): Add debug codes.
* ospf_abr.c (ospf_abr_translate_nssa): Recalculate LSA checksum.
* ospf_packet.h (OSPF_SEND_PACKET_LOOP): Added for test packet.
* ospf_dump.c (ospf_lsa_type_msg): Add OSPF_GROUP_MEMBER_LSA and
OSPF_AS_NSSA_LSA.
* ospfd.c (data_injection): Function to inject LSA. This is
debugging command.
2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_route.c (ospf_route_match_same): Remove function.
(ospf_route_match_same_new): Renamed to ospf_route_match_same.
* ospf_zebra.c (ospf_interface_address_delete): Add check for
oi->address. Suggested by Matthew Grant
<grantma@anathoth.gen.nz>.
(ospf_zebra_add): Remove function.
(ospf_zebra_add_multipath): Rename to ospf_zebra_add.
* ospf_interface.c: Remove HAVE_IF_PSEUDO part.
* ospf_zebra.c: Likewise.
2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_ase.c: Remove OLD_RIB part.
* ospf_route.c: Likewise.
* zebra-0.90 is released.
* ospf_packet.c (ospf_recv_packet): Use ip_len adjestment code to
NetBSD.
2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_route.c (ospf_route_delete): Use
ospf_zebra_delete_multipath.
2001-01-09 Matthew Grant <grantma@anathoth.gen.nz>
* ospf_interface.c (ospf_if_cleanup): Function name is renamed
from ospf_if_free(). Rewrite whole procudure to support primary
address deletion.
* ospf_zebra.c (ospf_interface_address_delete): Add primary
address deletion process.
2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_recv_packet): OpenBSD has same ip_len
treatment like FreeBSD.
2001-01-09 endo@suri.co.jp (Masahiko Endo)
* ospf_packet.c (ospf_recv_packet): FreeBSD kernel network code
strips IP header size from receiving IP Packet. So we adjust
ip_len to whole IP packet size by adding IP header size.
2001-01-08 endo@suri.co.jp (Masahiko Endo)
* ospf_network.c (ospf_serv_sock): When socket() is failed return
|
|
* stream.h: Unsigned long updated to size_t
* stream.c: ditto
* stream.h: Add stream_copy, stream_dup, stream_recvmsg.
Add comment describing struct stream abstraction, and various
other comments.
Deprecate several unsafe/ambigious macros.
Add STREAM_WRITEABLE and STREAM_READABLE.
Add (stream_getl_from) for symmetry.
Update stream_forward_{endp,getp} to use size_t offset.
Make stream data a 0 length array, rather than a seperate malloc.
* stream.c: Add consistency checks. Update to follow stream.h
changes.
(stream_new) Alloc stream+data in one go.
(stream_copy) new function, copy a stream.
(stream_dup) new function, dup a stream.
(stream_recvmsg) new function, recvmsg data into a stream.
(stream_empty) no need to check getp == 0.
|
|
* stream.h: Unsigned long updated to size_t
* stream.c: ditto
|
|
[backport candidate]
|
|
how much storage is required.
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the
error message.
|
|
* ospf_interface.h: Reduce structure padding by putting new u_char
field multicast_memberships in a better spot (grouped with
other u_char fields type and state).
|
|
* zebra.h: Change macro definitions SET_FLAG and UNSET_FLAG
to use compound assignment operators (aesthetic change).
|
|
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
|
|
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
|
|
* ripd.c: Untangle the construction of RIP auth data.
(rip_auth_prepare_str_send) new helper function, prepare
correct key string.
(rip_auth_simple_write) new helper, write out the
rip simple password auth psuedo-RTE.
(rip_auth_md5_ah_write) new helper, write out the
MD5 auth-header psuedo-RTE.
(rip_auth_header_write) new helper, write out correct
auth header data / psuedo-RTE.
(rip_auth_md5_set) rip out the memmove and writing of the
auth header psuedo-RTE. So that all that is left is to
write the trailing auth digest, and update digest offset
field in the original header.
(rip_write_rte) rip out writing of RIP header, writing of
simple auth data psuedo-RTE. Make it do what its name suggests,
write out actual RTEs.
(rip_output_process) remove the incorrect additional decrements
of rtemax. Prepare the auth_str, which simple or MD5 auth will
need. Move write out of RIP header and auth data to inside the
loop. Adjust paramaters as required.
|
|
* log.c: (zlog_signal,zlog_backtrace_sigsafe) Eliminate use of fileno()
since it is not async-signal-safe.
(_zlog_assert_failed) Rewrite crashlog logic more compactly.
(zlog_set_file,zlog_reset_file,zlog_rotate) Update logfile_fd
for use in signal handler.
|
|
* basic.texi: Add note about last-resort crash logging to /var/tmp
when file logging is not configured.
* quagga.info: updated build of autogenerated file
|
|
* log.c: (syslog_sigsafe) Reduce scope of syslog_fd: it is accessed
inside this function only.
(open_crashlog) New function to open /var/tmp/quagga.<daemon>.crashlog
with flags O_WRONLY|O_CREAT|O_EXCL to save some crash info.
(zlog_signal,_zlog_assert_failed) Increase logging priority from
LOG_ERR to LOG_CRIT. If no file logging is configured, try to use
open_crashlog to create a crash logfile.
(zlog_backtrace_sigsafe) If a crashlog file descriptor is open,
dump a backtrace to that file.
|
|
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
* if.h: Declare if_flag_dump.
[backport candidate]
|
|
transparent-nexthop" commands.
[merge from GNU Zebra]
|
|
[merge from GNU Zebra]
|
|
community-list cleanup.
[merge from GNU Zebra]
|
|
-> "disable-connected-check".
[merge from GNU Zebra]
|
|
bgpd.[ch]: Add BGP_INFO_STALE flag and end-of-rib support. "bgp
graceful-restart" commands added. Show numbers of individual
messages in "show ip bgp neighbor" command. Final pieces of graceful
restart.
[merge from GNU Zebra]
|
|
capability route-refresh" commands. Route refresh capability is sent
anyway now. Preserve dummy deprecated commands.
[merge from GNU Zebra]
|
|
draft - ie. "neighbor version 4-" commands. Preserve dummy "neighbor
version" command as deprecated.
[merge from GNU Zebra]
|
|
maximum-prefix limit" feature support.
[merge from GNU Zebra]
|
|
* bgpd.[ch], bgp_nexthop.c, bgp_snmp.c: Remove useless bgp_get_master()
function.
* bgp_packet.c: MP AFI_IP update and withdraw parsing.
* bgp_fsm.c: Reset peer synctime in bgp_stop(). bgp_fsm_change_status()
is better place to log about peer status change than bgp_event().
Log in bgp_connect_success().
* bgp_vty.c: Fix typo in comment.
* bgp_attr.c: Better log about unknown attribute.
[merge from GNU Zebra]
|
|
* daemon.c: (daemon) Replace perror with zlog_err.
* vty.c: (vty_serv_un) Replace perror with zlog_err.
* ripd.c: (rip_create_socket) Replace perror with zlog_err.
* ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with
zlog_err.
* ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with
zlog_err.
|
|
* ripng_interface.c: (ripng_multicast_join) Save errno before calling
ripngd_privs.change.
|
|
* ripd.c: (rip_create_socket) Save errno before calling
ripd_privs.change.
|
|
* ospf_network.c: (ospf_sock_init) Save errno before calling
ospfd_privs.change.
|
|
* buffer.h: Fix comment on buffer_getstr to reflect that it now
uses XMALLOC.
* buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc.
* filter.c: (access_list_remark,ipv6_access_list_remark) Use
argv_concat instead of buffer_getstr.
* if.c: (interface_desc) Use argv_concat instead of buffer_getstr.
* plist.c: (ip_prefix_list_description,ipv6_prefix_list_description)
Use argv_concat instead of buffer_getstr.
* bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead
of buffer_getstr.
* bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string
returned by buffer_getstr.
(bgp_show_community) Must use XFREE instead of free on string
returned by buffer_getstr.
* bgp_routemap.c: (set_community) Must use XFREE instead of free
on string returned by buffer_getstr.
* bgp_vty.c: (neighbor_description) Use argv_concat instead of
buffer_getstr.
|
|
* if_ioctl_solaris.c: (interface_list_ioctl) Save errno before calling
zserv_privs.change.
* ioctl{,_solaris}.c: (if_ioctl,if_ioctl_ipv6) Save errno before calling
zserv_privs.change.
* ipforward_solaris.c: (solaris_nd) Save errno before calling
zserv_privs.change.
* irdp_main.c: (irdp_sock_init) Save errno before calling
zserv_privs.change.
[backport candidate]
|
|
* rt_netlink.c: (netlink_socket,netlink_request,netlink_parse_info,
netlink_talk) Save errno before calling zserv_privs.change.
[backport candidate]
|
|
* ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print
an error message and return.
(ospf_read) If the interface state is ISM_InterfaceDown, issue
a warning message and ignore the packet.
|
|
* vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes
for functions with no arguments (must specify argument list as void).
* vtysh.c: Enhance vtysh_client array to include the daemon's name
and bitmask and socket path (in addition to the fd). This allows
us to use loop constructs for various operations that need to be
applied to all client daemons, and it facilitates better error
messages. Also fix some prototypes with void argument lists.
(vclient_close) Issue a warning message indicating which daemon's
socket is being closed.
(vtysh_execute_func,vtysh_config_from_file) Use a for loop to
call vtysh_client_execute.
(vtysh_write_terminal,write_config_integrated) Use a for loop to
call vtysh_client_config.
(vtysh_write_memory) Use a for loop to call vtysh_client_execute.
(vtysh_show_daemons) Use a for loop.
(vtysh_connect) The struct vtysh_client is now statically initialized,
so do not initialize it here.
(vtysh_connect_all) Use a for loop to call vtysh_connect. Set
ripd_client pointer for use in vtysh_exit_ripd_only.
|
|
* lib/buffer.h: Document behavior of buffer_getstr function.
* lib/buffer.c: (buffer_getstr) Fix bug: must handle case where
the string extends beyond the head struct buffer_data.
|
|
* lib/command.h: Document behavior of argv_concat function.
* lib/command.c: (argv_concat) Calculate total string length first so
we can call malloc just once (instead of realloc'ing to add each
string element).
(do_echo,config_logmsg) Allow for possible NULL return value from
argv_concat.
|
|
* ospf6_asbr.c: Add "hsls" to the zroute_name const char array.
|
|
* configure.ac: Bump version to 0.99.0
* doc/quagga.info: Version bump (autogenerated)
|
|
if old one is flaged as BGP_INFO_ATTR_CHANGED.
|
|
* zebra/rt_netlink.c: ignore wireless newlink netlink messages.
|
|
use it as well.
* vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already
works in vty.
|
|
"integrated-vtysh-config".
|
|
* log.h: Test for SA_SIGINFO to see whether zlog_signal takes final
two args (siginfo and program_counter).
* log.c: (hex_append) Include this function only if SA_SIGINFO or
HAVE_GLIBC_BACKTRACE is defined.
(zlog_signal) Final two args (siginfo and program_counter) now
depend on whether SA_SIGINFO is defined on this platform.
* sigevent.c: (program_counter) Do not include this function if
SA_SIGINFO is not defined on this platform.
(exit_handler,core_handler) Test for SA_SIGINFO to decide whether
2nd & 3rd arguments are present and to decide how to invoke
zlog_signal.
(trap_default_signals) Test for SA_SIGINFO and invoke sigaction
appropriately.
|
|
functions and some tiny related fixes. No functional changes.
|
|
case of /proc being used. I don't have others to test with at the
moment.
|
|
* log.h: Change prototype for zlog_backtrace_sigsafe to take additional
program_counter argument.
* log.c: (zlog_backtrace_sigsafe) Add additional program_counter
argument. If it is non-NULL, use backtrace_symbols_fd to resolve
the address.
(zlog_signal) Call zlog_backtrace_sigsafe with additional
program_counter argument.
[pullup candidate]
|
|
configured or not. Being not configured is even better reason to
do it.
|
|
[pullup candidate]
|
|
to walk up in the node tree if called from vtysh. Different daemons
might have commands with same syntax in different nodes (for example
"router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons).
* vtysh.c: Reflect changes in lib. cmd_execute_command() should know
now that it's called from vtysh and must not attempt to walk up in
the node tree.
[pullup candidate]
|
