| Age | Commit message (Collapse) | Author |
|---|
|
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable
the length of confederation path segments to be included during the
as-path length check in the best path decision.
|
|
Closes Bugzilla #167.
|
|
inet_ntoa alike.
* ripngd.[hc], ripng_interface.c, ripng_peer.c: inet6_ntoa() takes
argument now by value.
|
|
|
|
procedure. Define vtysh_cmd_FILES. Use EXTRA_DIST.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
ripngd/ripngd.c (inet6_ntop).
* ripngd.[hc]: Remove inet6_ntop() and any usage of it. inet6_ntoa()
from lib is used now.
* ripng_interface.c: inet6_ntop() -> inet6_ntoa().
* ripng_peer.c: inet6_ntop() -> inet6_ntoa().
|
|
* HACKING: Expand on the importance of supplying good ChangeLog's in
the PATCH SUBMISSION section.
|
|
* HACKING: remove the 'manually patch redhat/quagga.spec' bit
from RELEASE section. Let the rpm revision be CONFDATE, will work
fine.
|
|
* Makefile.am: Get rid of built_sources. It causes them to be added
to dist, and the dist host can not generate the PDFs.
|
|
* lib/vty.c: Improve logging of failures to open vty socket(s).
See bugid #163.
* zebra/zserv.c: print more helpful errors when we fail to successfully
bind and listen on zserv socket. Closes bugzilla #163.
|
|
brackets around source. Single ones broke square brackets in the
code (arrays).
|
|
and define action for cross-compiling.
[backport candidate]
|
|
* if_ioctl.c: (interface_list_ioctl) Use if_get_by_name_len.
* if_proc.c: (ifaddr_proc_ipv6) Increase size of ifname buffer to
avoid overflow.
* kernel_socket.c: (ifan_read) Use if_get_by_name_len.
* if.h: Fix comments to reflect that if_lookup_by_name and
if_get_by_name now require the argument strings to be NUL-terminated.
* if.c: (if_lookup_by_name) Compare using strcmp.
(if_get_by_name) Pass strlen(ifname) as 2nd arg to if_create.
|
|
* ospf_interface.h: (ospf_if_lookup_by_name) Remove declaration of a
function that does not exist.
* ospf6_interface.[ch]: (ospf6_interface_lookup_by_name) Remove unused
function.
|
|
* ospf_zebra.c: (zebra_interface_if_lookup) Must use
if_lookup_by_name_len.
|
|
* isis_zebra.c: (isis_zebra_if_del) Must use if_lookup_by_name_len.
|
|
* if.c: (if_nametoindex) The man page is rather vague, but it seems
like the argument to if_nametoindex has an implicit maximum length
of IFNAMSIZ characters.
|
|
* if.h: (if_lookup_by_name_len, if_get_by_name_len) New functions.
* if.c: (if_lookup_by_name_len, if_get_by_name_len) New functions.
(if_get_by_name) Tighten up code.
(interface) Use new function if_get_by_name_len.
* zclient.c: (zebra_interface_add_read) Use new if_get_by_name_len
function.
(zebra_interface_state_read) Use new if_lookup_by_name_len function.
* kernel_socket.c: (ifm_read) Use new if_lookup_by_name_len function
to save a memcpy.
* if_ioctl_solaris.c: (interface_list_ioctl) Fix subtle bug with new
if_get_by_name_len function.
* ospf_interface.c: (ospf_vl_new) Use strnlen to fix call to if_create.
|
|
generator code.
* isisd/Makefile.am: Variables to handle conditonal compiling of
topology generator code.
* isisd/isis_lsp.c: lsppdu_realloc() is used by topology generator.
* isisd/isisd.c: Rename show_isis_topology_cmd to not conflict the one
in the isis_spf.c.
* isisd/isisd.h: Remove TOPOLOGY_GENERATE define, it will be defined in
toplevel config.h if topology generator is enabled.
* isisd/topology/Makefile.am: Handle the libtoolized Quagga libraries.
|
|
* Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES
for figures, automake doesnt know anything about them.
|
|
* str.c: Replace strlcpy and strlcat with actual working versions
copied from rsync-2.6.2/lib/compat.c.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
* .cvsignore: ignore eps files, built from sources
|
|
* INSTALL.quagga.txt: Add note about additional CVS build
requirements, if one wishes to build ps/pdf docs.
|
|
* ospf6_route.c: (ospf6_route_show, ospf6_route_show_detail) Protect
against the possibility that the string returned by if_indextoname
may not terminate with '\0'.
|
|
* configure.ac: Add strnlen to AC_CHECK_FUNCS.
* zebra.h: Should include str.h to pick up missing functions.
* str.h: Declare strnlen if needed.
* str.c: Do not include str.h since zebra.h now includes it.
(strnlen) New function.
|
|
* Makefile.am: quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
|
|
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new
files, dia diagramme XML versions of the original corresponding
EPS encapsulated bitmaps.
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new
files, png exports by dia of the source dia diagrammes above.
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed,
replaced by above dia source.
* routeserver.texi: remove extension in image macros.
* quagga.info: updated build
* Makefile.am: Add rules to build eps (using 'convert'), png (using
dia). Add figures_BUILT_SOURCES to extra_dist to avoid the
dependency on dia :) (amongst other things) for dist users.
|
|
it's not for debug.
* rt_netlink.c (netlink_talk): Don't assume we use netlink_cmd
although we do now actually.
* rt_netlink.c (netlink_route, netlink_route_multipath): Always use
netlink_cmd to send messages to the kernel.
[backport candidate]
|
|
* ospf_dump.c: (show_debugging_ospf) Show if ospf event debugging
is turned on.
[backport candidate]
|
|
* irdp.h: Add prototype for irdp_sock_init, and fix protos for
other irdp_* functions.
* irdp_interface.c: (irdp_if_start) If irdp_sock is negative,
call irdp_sock_init to create the IRDP socket.
(irdp_if_init) Rename to irdp_init().
(get_iflist_ifp) Remove function that is a duplicate of
if_lookup_by_index.
(*) Make many functions static. And remove superfluous "\n" from
several zlog messages.
* irdp_main.c: (irdp_init) Remove function that used to call
irdp_if_init() and irdp_sock_init(), since we will now create
the socket only upon first use.
(irdp_sock_init) Do not update global irdp_sock variable, just
return the fd and assume that the caller will do so. If setsockopt
calls fail, close the socket before returning -1.
(*) Make many functions static.
* irdp_packet.c: Initialize irdp_sock to -1.
(irdp_read_raw) Call standard library function if_lookup_by_index
instead of get_iflist_ifp.
(irdp_recvmsg) Should be static, not global.
|
|
* rt_netlink.c: (netlink_link_change) If the status of an
operative interface changes (e.g. MTU changes), the client
daemons should be notified by calling zebra_interface_up_update.
Previously, the information was being updated in zebra's
interface structure, but the clients were not notified of
changes to an operative interface.
* ospf_zebra.c: (ospf_interface_state_up) If the MTU of an operative
interface changes, print a debug message and call ospf_if_reset()
to simulate down/up on the interface.
* ospf_interface.h: Declare new function ospf_if_reset().
* ospf_interface.c: (ospf_if_reset) New function to call ospf_if_down
and ospf_if_up for all ospf interfaces attached to an interface.
|
|
* ospf_packet.c: (ospf_write_frags) Enhance error message to
show MTU. Also make function static.
(ospf_write) Enhance error message to show interface name and MTU.
Also make function static.
|
|
* ospf_vty.c (show_ip_ospf_interface_sub): Display interface MTU and
bandwidth; this is useful for debugging problems. Also, the function
should be static.
|
|
snmp support.
|
|
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES
for that.
|
|
about various headers. CFLAGS is not correct place to specify
includes, INCLUDES is for that.
|
|
exist at all.
[backport candidate]
|
|
tries really hard to make icc look like gcc, there are some
differences. It's very verbose with -Wall and it doesn't support
the individual -W options. We are going to ignore some of these
warnings.
|
|
|
|
include year 2005.
|
|
[backport candidate]
|
|
* interface.c, interface.h, rtadv.c, rtadv.h: extensions to Neighbor
discovery for Mobile IPv6.
|
|
* Extensions to Neighbor Discovery for Mobile IPv6
|
|
no particular afi/safi configured.
[backport candidate]
|
|
* zebra.h: Must check whether __attribute__ should be defined before
including zassert.h.
[backport candidate]
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* command.c: (various) Fix indentation and other whitespace.
|
|
* command.c: (sort_node) use vector_max instead of referencing
(struct vector *)->max directly. Test that vector_max is > 0
before using it to calculate an index.
Fixup vector loop to make main body conditional on vector slot
not being empty.
(cmd_cmdsize) Fixup vector loop to make main body conditional on
vector slot not being empty.
(cmd_filter_by_completion) ditto
(cmd_filter_by_string) ditto
(is_cmd_ambiguous) ditto
(cmd_describe_command_real) Change index integers to unsigned.
Test that vector_max is > 0 before using it to calculate an index.
Return immediately with CMD_ERR_NO_MATCH if vline has no
active slots.
Fixup vector loop to make main body conditional on vector slot
not being empty.
(cmd_complete_command_real) ditto.
(cmd_execute_command_strict) Fixup vector loop to be conditional
on non-null slot.
|
