summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-20ospf6d: move named constants to ospf6d.hDenis Ovsienko
2011-08-19lib: fix omission in the previous commit to lib/sockopt.cDmitrij Tejblum
* sockopt.c (setsockopt_ipv4_multicast_if): fix missed line in the previous commit.
2011-08-19ospf6d: justify some ABR debug codeDenis Ovsienko
* ospf6_abr.c * ospf6_abr_examin_summary(): only fill "buf" when it is used
2011-08-19lib: simplify interface of setsockopt_multicast_ipv4().Dmitrij Tejblum
* sockopt.[ch] (setsockopt_ipv4_multicast): ifindex is now mandatory (all non-ancient OSes can use it anyway), and if_addr parameter (the address of the interface) is now gone. (setsockopt_ipv4_multicast_if): IP_MULTICAST_IF processing moved to this new function * ospf_network.c (ospf_if_add_allspfrouters, ospf_if_drop_allspfrouters, ospf_if_add_alldrouters, ospf_if_drop_alldrouters, ospf_if_ipmulticast), rip_interface.c (ipv4_multicast_join, ipv4_multicast_leave, rip_interface_new): adapt to the new interface
2011-08-19ospf6d: spellingDenis Ovsienko
2011-08-09bgpd: improve "show ip bgp scan detail"Denis Ovsienko
* bgp_nexthop.c (show_ip_bgp_scan_tables): access proper structure field in AF_INET6 case, handle ifindex NH type properly
2011-08-08bgpd: dismiss some zlookup checksDenis Ovsienko
bgp_nexthop_onlink(): zlookup is not used here at all bgp_nexthop_lookup_ipv6(): rely on the detection performed by "query" function (this also changes the fallback value to 0), reorder if-block bgp_nexthop_lookup(): idem
2011-08-05bgpd: add "show ip bgp scan detail" commandDenis Ovsienko
* bgp_nexthop.c: (show_ip_bgp_scan) transform into show_ip_bgp_scan_tables(), which uses inet_ntop() and can dump nexthops on request; (show_ip_bgp_scan_detail_cmd) new function
2011-08-05bgpd: touch nexthop handling codeDenis Ovsienko
bgp_nexthop_lookup_ipv6(): declare variables where they are actually used, drop no-op initialization (the field is already 0) bgp_nexthop_lookup(): ditto bgp_nexthop_check_ebgp(): rename to bgp_nexthop_onlink() bgp_nexthop_cache_changed(): rename to bgp_nexthop_cache_different()
2011-08-03bgpd: use XCALLOC to allocate bgpd damp arrayStephen Hemminger
* bgpd: (bgp_damp_parameter_set) The BGP reuse_index is not initialized properly. This would cause sporadic crash when disabling dampening. Use XCALLOC correctly and the right size array is initialized and no memset is needed.
2011-08-03lib: fix more format warnings (#637)Christian Hammers
The following patch was also neccessary to compile. * command.c: (config_logmsg_cmd) use "%s" format spec * if.c: (connected_log) ditto
2011-08-02ospfd: remove useless RFC1583 checkAlexandre Chappuis
* ospf_route.c: Function ospf_asbr_route_cmp is called uniquely from ospf_route_cmp() when the flag OSPF_RFC1583_COMPATIBLE is not set. Therefore, the check that the flag is set doesn't make sense at all and it can consequently be removed without doing any harm. Signed-off-by: Alexandre Chappuis <alc@open.ch> Signed-off-by: Roman Hoog Antink <rha@open.ch>
2011-08-01lib: remove unused variableDenis Ovsienko
* sockopt.c (getsockopt_ifindex): "ifindex" was never used
2011-08-01delete CVS keywordsDenis Ovsienko
2011-08-01ospf6d: Remove obsolete codeTom Goff
* ospf6_area.c: (ospf6_area_delete) Get rid of unused code that refers to a nonexistent function and structure member.
2011-08-01lib: zlog should clean up its memoryTom Goff
* log.c: (closezlog) Also free the dynamically allocated filename when a log is closed.
2011-08-01bgpd: Fix display of unsigned attributesWataru Tanitsu
* bgp_route.c: (route_vty_out*) The local prefix, metric and weight values are all stored as uint32_t. Change the format to %u so that large values are not displayed as negative integers.
2011-08-01ospfd: Lower level of some common messages from info to debugPaul Jakma
* ospf_{ism,network}.c: Certain oft-repeated but trivial messages should be debug log level, not info, to avoid spamming 'terminal monitor'
2011-08-01lib: prefix.c nano-optimisationPaul Jakma
* lib/prefix.c: (prefix_match) nano-optimisation, let it return early without copying pointers.
2011-07-29Merge remote-tracking branch 'origin/master'Paul Jakma
2011-07-29Merge branch 'attr-errors'Paul Jakma
Contains BGP fixes: - set extcommunity crash: tihs patch tries to make the refcounting more robust but does not fully solve the problem, sadly. - BGP attribute error handling: Little testing.
2011-07-20bgpd: We try to skip out of updating the multipath aggregate if there are noJosh Bailey
changes in the multipath set or attributes, but failed to check for just a bestpath change. The result is there is no attribute on the new bestpath and we hit the assert. Added the bestpath check and rearranged the code to only check attributes when there is no bestpath or multipath change, so we only scan the for attribute changes when necessary. * bgpd/bgp_mpath.c * bgp_info_mpath_aggregate_update(): Added check for bestpath change before skipping the aggregate generation. Skip the attribute check if either the multipath set or bestpath has changed.
2011-07-20bgpd: Fix a crash caused by mistakenly dequeueing the bestpath on theJosh Bailey
multipath list. This causes the multipath list to get truncated but the multipath count still reflects what it was before truncation. When we install the route to zebra we fail to fill the nexthop array with the number of nexthop pointers indicated by the multipath count and this leads to a NULL pointer crash in stream_put_in_addr(). Changes: * bgpd/bgp_mpath.c * bgp_info_mpath_update(): If new_mpath is the bestpath we should just move to the next mp_list node. Move dequeue of new_mpath and the code that updates next_mpath to inside the check that new_mpath is not the bestpath.
2011-07-20bgpd: When advertising a multipath route, the attribute set to beJosh Bailey
advertised is based on the bestpath attribute set, but the following attributes are aggregated from the attribute sets of the multipath constituents: - AS_PATH - ORIGIN - COMMUNITIES - EXTENDED COMMUNITIES In addition the route is advertised with the NEXT_HOP set to the router's interface IP address, instead of the NEXT_HOP of the best path. This is to ensure that traffic will go to this router so it can be fanned out via the multipath route. * bgpd/ecommunity.c * ecommunity_uniq_sort(): Make this function externally accessible * bgpd/ecommunity.h * Add external declaration for ecommunity_uniq_sort() * bgpd/bgp_mpath.c * bgp_info_nexthop_cmp(): Replace calls to bgp_attr_extra_get() to avoid unwanted memory allocation * bgp_info_mpath_free(): Free aggregate attribute for multipath * bgp_info_mpath_attr(): Lookup aggregate attribute of a multipath route * bgp_info_mpath_attr_set(): Set aggregate attribute of a multipath route * bgp_info_mpath_aggregate_update(): Update the aggregate attribute of a multipath route * bgpd/bgp_mpath.h * bgp_info_mpath: Add pointer to hold aggregate attribute of a multipath * Add external declarations for new functions * bgpd/bgp_route.c * bgp_announce_check(): Use aggregate attribute when announcing multipath route * bgp_announce_check_rsclient(): Use aggregate attribute when announcing multipath route * bgp_best_selection(): After updating multipath set, update the multipath aggregate attribute
2011-07-20bgpd: For deterministic MED build a multipath set for each peer AS as theJosh Bailey
first stage of the best path calculation. The second stage then selects a winner from each peer AS's best path. In the second stage we clear multipath set of the non-selected best paths via bgp_mp_dmed_deselect(). Since the multipath set is already marked up for the winning path, we don't call bgp_info_mpath_update() after the second stage calculation. * bgpd/bgp_mpath.c * bgp_mp_dmed_deselect(): New function to cleanup the multipath markup if a DMED selected path loses in stage 2 of the best path calculation * bgpd/bgp_mpath.h * Add external declaration of bgp_mp_dmed_deselect() * bgpd/bgp_route.c * bgp_best_selection(): If multipath is enabled, build up the mp_list for the current peer AS, and do the RIB markup the best path from that AS. In the second stage, clear the RIB markup for the DMED selected path if it is not selected as best. Only call bgp_info_mpath_update() in the second stage when not doing deterministic MED.
2011-07-20bgpd: Modify the BGP to zebra route announcement to support multipathJosh Bailey
routes. Use a growable buffer (bgp_nexthop_buf) to collect nexthops that are included in the announcement. Use the BGP_INFO_MULTIPATH_CHG flag to trigger zebra announcement so zebra will be updated if the multipath set changes. Display all multipath nexthops in 'debug bgp zebra' output. * bgpd/bgp_main.c * bgp_exit(): Free bgp_nexthop_buf when exiting * bgpd/bgp_route.c * bgp_process_rsclient(): Clear BGP_INFO_MULTIPATH_CHG after processing * bgp_process_main(): Check BGP_INFO_MULTIPATH_CHG to trigger zebra announcement and clear aftr processing * bgpd/bgp_zebra.c * bgp_nexthop_buf: Growable buffer used to collect nexthops for zebra announcement * bgp_zebra_announce(): Grow bgp_nexthop_buf if needed. Include multipath count in zebra announcement and add all nexthops to bgp_nexthop_buf. Pass bgp_nexthop_buf data to zebra announcement. Added nexthops to debug output. * bgp_zebra_init(): Initialize bgp_nexthop_buf at startup * bgpd/bgp_zebra.h * BGP_NEXTHOP_BUF_SIZE: Default initial bgp_nexthop_buf size has room for 8 nexthops
2011-07-20bgpd: Adds support to mark up the BGP rib table entry with multipathJosh Bailey
information based on the multipath list (mp_list) generated during the best path calculation. Display "multipath" for paths that are multipath and also on bestpath if the route is multipath. Flag a best path with the BGP_INFO_MULTIPATH_CHG if the multipath set has changed since the last update. This can be used to trigger updates to zebra and peers. The multipath markup is a lazily allocated bgp_info_mpath structure that is added to the best path and any multipaths. The mpath structures are linked together with the best path element at the head and the other elements ordered by nexthop and then by peer address. This markup scheme is updated by calling bgp_info_mpath_update() and passing in a new mp_list the the current multipath set. There are additional API's for walking the multipath set, querying the count of multipaths, and for cleaning up the multipath markup information when freeing path information. * bgpd/bgp_mpath.c * bgp_info_mpath_new(): Allocation of new mpath element * bgp_info_mpath_free(): Release memory for mpath element * bgp_info_mpath_get(): Access mpath element of path. Allocate memory on-demand * bgp_info_mpath_enqueue(): Enqueue a path onto the multipath list * bgp_info_mpath_dequeue(): Remove a path from the multipath list * bgp_info_mpath_first(): Return first path on the multipath list * bgp_info_mpath_next(): Return next path on the multipath list * bgp_info_mpath_count(): Return the number of paths on the multipath list * bgp_info_mpath_count_set(): Set the number of paths on the multipath list * bgp_info_mpath_update(): Update multipath markup on bgp route table entry and flag any changes. Emit 'debug bgp event' output on any multipath change. * bgpd/bgp_mpath.h * struct bgp_info_mpath: Information added to a bgp_info path to record multipath information * External declarations for new functions in bgp_mpath.c * bgpd/bgp_route.c * bgp_info_free(): Free mpath memory when freeing path information * bgp_info_reap(): Dequeue path from multipath queue before deleting it * bgp_best_selection(): Calls bgp_info_mpath_update() with latest mp_list to mark-up rib table entry * bgp_vty_out_detail(): Add display of multipath flag for a path. Also display 'multipath' for bestpath if it is a multipath route * bgpd/bgp_route.h * struct bgp_info: Add pointer to bgp_info_mpath information * Add flags to mark a path as multipath (BGP_INFO_MULTIPATH) and to mark bestpath if multipath information has changed (BGP_INFO_MULTIPATH_CHG) * lib/memtypes.c * Add MTYPE_BGP_MPATH_INFO for allocating memory for bgp_info_mpath * tests/bgp_mpath_test.c * Add test case for bgp_info_mpath_update() and supporting functions
2011-07-20bgpd: Adds equal-paths check to path comparison. Paths that areJosh Bailey
equal to the best path are accumulated onto an ordered list (mp_list) if maximum-paths is configured. A future commit will add the multipath markup to the BGP rib table based on the mp_list. Add unit test for the added mp_list functions. Deterministic MED is not supported in this commit, it will be added later. * bgpd/bgp_aspath.c * Make aspath_cmp() an external symbol so it can be used in equivalent paths check * bgpd/bgp_aspath.h * Add extern declaration of aspath_cmp() * bgpd/bgp_mpath.c * bgp_info_nexthop_cmp(): Compares nexthops of two paths * bgp_info_mpath_cmp(): Compare function to order multipaths by nexthop and then by peer address * bgp_mp_list_init(): Initialize a list with the multipath order function * bgp_mp_list_clear(): Clear out the mp_list * bgp_mp_list_add(): Add a multipath to mp_list * bgpd/bgp_mpath.h * External declarations for above added functions in bgp_mpath.c * bgpd/bgp_route.c * bgp_info_cmp(): Add equivalent paths result (paths_eq). If eBGP paths are equal down to IGP metric check, flag as equal if peer AS matches. Similarly for iBGP paths but compare full AS_PATH. * bgp_best_selection(): If multipath is enabled, accumulate equivalent paths in mp_list. Add debug bgp event output to see result (will be filtered later to display only when change occurs) * bgp_process_rsclient(): Pass multipath config to bgp_best_selection() * bgp_process_main(): Pass multipath config to bgp_best_selection() * tests/bgp_mpath_test.c * Add unit test case for bgp_mp_list functions
2011-07-20bgpd: add bgp_mpath_test.cJosh Bailey
* tests/bgp_mpath_test.c * New file with test framework for testing BGP multipath * Add test for CLI support functions * tests/Makefile.am * Add new testbgpmpath target
2011-07-20bgpd: Add new configuration cli for eBGP and iBGP multipath.Josh Bailey
There is support to configure this for each (AFI,SAFI), but currently this configuration is only present for IPv4 unicast: maximum-paths [ibgp] <1-255> no maximum-paths [ibgp] [<1-255>] * bgpd/Makefile.am * Add bgp_mpath.h and bgp_mpath.c to build * bgpd/bgp_mpath.h * New file for bgp multipath declarations * define BGP_DEFAULT_MAXPATHS * bgpd/bgp_mpath.c * bgp_maximum_paths_set(): Configure maximum paths for the given afi, safi and bgp instance * bgp_maximum_paths_unset(): Return maximum paths configuration to the default setting for the given afi, safi and bgp instance * bgpd/bgp_vty.c * Define command strings for above CLI * bgp_config_write_maxpaths(): Outputs configuration for the given afi, safi and bgp instance * Install command elements for IPv4 unicast * bgpd/bgp_zebra.h * bgp_config_write_maxpaths(): External declaration * bgpd/bgpd.c * bgp_create(): Initialize bgp instance to default maximum paths setting * bgp_config_write_family(): Output maximum paths configuration for the given address family * bgp_config_write(): Output maximum paths configuration for IPv4 unicast address family * bgpd/bgpd.h * struct bgp: Add storage for maximum paths configuration for each afi, safi
2011-07-18bgpd: Fix compile failure if IPv6 build was disabled.Paul Jakma
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network which is HAVE_IPV6, so these should be too. (bgp_route_init) and the installs should be similarly ifdefed
2011-07-17bgpd: rename SAFI 3 according to RFC4760Denis Ovsienko
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use that was never fully implemented, so it is deprecated by this document. * zebra.h: rename macro * bgp_fsm.c: (bgp_graceful_restart_timer_expire, bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update * bgpd.c: (peer_nsf_stop): update * bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case any more
2011-07-15configure: fix OpenPAM detectionDenis Ovsienko
2011-07-14configure: fix FreeBSD header detection (BZ#408)Denis Ovsienko
This change is based on Xavier Beaudouin's patch (which fixes detection of 3 config.h macros on FreeBSD without any impact to Linux build of Quagga) and FreeBSD port patch (which fixes 5 config.h macros, but breaks the Linux build), it fixes 5 macros and works for both FreeBSD 8 and Linux.
2011-07-14bgpd: more SAFI fixesDenis Ovsienko
Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
2011-07-13Merge remote-tracking branch 'polymorf/master'Greg Troxel
2011-07-13bgpd: fix SAFI for for MPLS labeled VPN-IPv6Denis Ovsienko
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659) * bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
2011-07-12bgpd: consistent log msg format (BZ#565)heasley
2011-07-12ospf6d: check MTU with message header size in mindDmitrij Tejblum
* ospf6_message.c: (ospf6_packet_max): new function, return maximum IPv6 payload on an interface; (ospf6_hello_send, ospf6_dbdesc_send, ospf6_dbdesc_send_newone, ospf6_lsreq_send, ospf6_lsupdate_send_neighbor, ospf6_lsupdate_send_interface, ospf6_lsack_send_neighbor, ospf6_lsack_send_interface): compare message size with the maximum payload instead of the MTU.
2011-07-12ospf6d: copy "mtu-ignore" option from ospfdDmitrij Tejblum
"mtu-ignore" is an option ospfd used to mimic from the vendor's implementation, now ospf6d will also implement it. * ospf6_interface.h: extend ospf6_interface structure by one flag * ospf6_interface.c: (ipv6_ospf6_mtu_ignore, no_ipv6_ospf6_mtu_ignore): new declarations; (ospf6_interface_create): show initial value for consistency; (ospf6_interface_show): print flag status * ospf6_message.c: (ospf6_dbdesc_recv): consider interface-specific flag when checking MTU
2011-07-12version RE-0.99.17.1Denis Ovsienko
2011-07-05bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d. (cherry picked from commit c8f3fe3063cb9ff193b13011cfbda3e605395340) Conflicts: bgpd/bgp_attr.c (caused by c8e7b895, resolved)
2011-07-04bgpd/security: CVE-2010-1674 Fix crash due to extended-community parser errorPaul Jakma
* bgp_attr.c: (bgp_attr_ext_communities) Certain extended-community attrs can leave attr->flag indicating ext-community is present, even though no extended-community object has been attached to the attr structure. Thus a null-pointer dereference can occur later. (bgp_attr_community) No bug fixed here, but tidy up flow so it has same form as previous. Problem and fix thanks to anonymous reporter. (cherry picked from commit 0c46638122f10019a12ae9668aec91691cf2e017)
2011-07-04doc: fix "ipv6 address" interface command syntax (#608)Denis Ovsienko
(cherry picked from commit e6844aa5d23cf56dd1f31afc96e8145ab188953f)
2011-07-04ripd: resolve debug statements issue (bug 442)Andrew J. Schorr
...A nasty bug, if you forgot to disable debugging, stored the config and reboot your machine - if you really depend on ripd, then the machine will not fully come back on the network, because ripd fails. (cherry picked from commit 0fa0335316ce14a79ea4bbb0c40e1322c9941dd3)
2011-07-04bgpd: VTY string fixes for debug commandsDavid Ward
* bgpd/bgp_debug.c: fix VTY strings for BGP debug commands to match correct syntax (cherry picked from commit 6e22b9017e1ae2ce61c383b1b2b63973207704ac)
2011-07-04bgpd: fix handling of "Unsupported Capability"Dmitrij Tejblum
* bgp_packet.c: (bgp_notify_receive) justify the difference between BGP_NOTIFY_OPEN_UNSUP_PARAM and BGP_NOTIFY_OPEN_UNSUP_CAPBL cases, as it is explained in RFC5492, page 3, paragraph 1. "Unsupported Capability" error does not mean, that the peer doesn't support capabilities advertisement -- quite the opposite (if the peer would not support capabilities advertisement, the code would be "Unsupported Optional Parameter"). Thus there is no reason to mark the peer as one non-supporting capabilities advertisement. Example: suppose the peer is in fact IPv6-only, but we didn't configure anything address-family specific for it. Then, the peer would refuse the session with "Unsupported Capability" code. If we internally set the peer as non-supporting capabilities advertisement after that, we will not be able to establish the session with it ever, even with a fixed configuration -- IPv6-only BGP session cannot be established without capabilities. In practice an edge case would be seen as the same IPv6 peer working with its "neighbor" block read from bgpd.conf, but not working, when slowly input in "conf t" mode. (cherry picked from commit c7aa8abd8788c3607ad0131f02e892cf92221e40)
2011-07-04ospf6d: fix crash in SPF calculationDmitrij Tejblum
* ospf6_spf.c: Don't replace a node with another node with a lower number of hops, instead get them from the queue in the correct order. (Actually, the replacement crashed the ospf6d daemon rather than worked.) (cherry picked from commit 403138e189c24f6867824c4eeb668d11564e1ca0)
2011-07-04bgpd: fix community-list error message spellingDenis Ovsienko
* bgp_vty.c: (community_list_perror, show_ip_community_list_arg, show_ip_extcommunity_list_arg) fix spelling (cherry picked from commit b729294c8c5c6f2af8ddf6cfbea2374b6faabe9d)
2011-06-28fix typoRoman Hoog Antink