Age | Commit message (Collapse) | Author |
|
* command.c: Fix <cr> display problem for command line
description.
|
|
* ospfd/ospf_route.c: Fixup extraneous list_delete which was causing
SEGVs of ospfd.
|
|
* configure.ac: bump autoconf's idea of quagga version
|
|
* lib/version.h: bump to 0.96.1.
|
|
* zebra/main.c: Fixup ZEBRA_{GROUP,USER} defines ->
QUAGGA_{USER,GROUP}
* bgpd/bgp_main.c: ditto
* ospf6d/ospf6_main.c: ditto
* ospfd/ospf_main.c: ditto
* ripd/rip_main.c: ditto
* ripngd/ripng_main.c: ditto
* zebra/main.c: ditto
|
|
* *.init: change /etc/zebra to /etc/quagga
|
|
* redhat/quagga.spec.in: change the vty group, zebravty -> quaggavty
|
|
* redhat/quagga.pam: comment out the per user config, doesnt work
reliably as is - default to root only pam config.
|
|
* doc/Makefile.am: zebra.texi went to quagga.texi, so the automake
dependency must change too.
|
|
* vtysh/vtysh_user.c: include lib/version.h, for QUAGGA_PROGNAME.
|
|
* lib/version.h: Add QUAGGA_PROGNAME
* lib/smux.c: hardcoded zebra/quagga -> QUAGGA_PROGNAME
* lib/command.c: ditto
* vtysh/vtysh_user.c: ditto
|
|
* lib/smux.c: change progname to quagga.
|
|
* bgpd/bgp{_fsm.c,_vty.c,d.c,d.h}: Add support for "bgp
log-neighbor-changes" command.
|
|
2003-08-12 Paul Jakma <paul@dishone.st>
* Makefile.am: redhat/zebra.* -> redhat/quagga.*
* configure.ac: Bump autoconf prerequisite to 2.53.
dist name zebra -> quagga.
general Zebra -> Quagga where appropriate (ie not zebra daemon).
User and group zebra->quagga.
s/ZEBRA\(_VERSION\)/QUAGGA\1/.
* bgpd/bgp_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/command.c: Update banners and s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/print_version.c: ditto
* lib/version.h: s/ZEBRA\(_VERSION\)/QUAGGA\1/ and bump version.
Change ZEBRA_URL.
* lib/smux.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* lib/vty.h: Change Zebra.conf to Quagga.conf (integrated file)
* ospf6d/ospf6{,_main}.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
* ospfd/ospf_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
|
|
* redhat/quagga.pam: zebra -> quagga
|
|
* redhat/: zebra.{logrotate,pam,spec.in} ->
quagga.{logrotate,pam,spec.in}.
|
|
* doc/: GNU Zebra -> Quagga, in most places. Update Url and list URL
to quagga.net. zebra.texi -> quagga.texi.
|
|
* ospfd/ospf_zebra.c: (ospf_zebra_delete) Set ifindex if no nexthop
supplied. log if no (ifindex || nexthop) supplied.
|
|
* lib/linkhist.h: The LISTNODE_{ADD,DEL} macros (not used anywhere)
do not maintain the list count - fix.
|
|
* bgp_route{,map}.c: Extend 'set ip next-hop' in route-maps with
ability to specify 'peer-address' rather than IP.
|
|
* ospf6_ism.c: DR Election bug fix.
|
|
* redhat/zebra.spec.in: add missing wildcard for Kyle's previous
fix.
|
|
* ospfd/ospf_zebra.c: (ospf_zebra_delete) Do not dereference the
ifp, it mightn't exist.
|
|
* Add missing 'i' to getopts, short form of --pid_file.
see http://bugzilla.quagga.net/show_bug.cgi?id=25
|
|
* bgpd/bgp_route.c: route server passes routes which may have
no-export community
|
|
|
|
* ospfd/ospf_vty.c: (ospf_config_write) fix output of
passive-interface when IP has been specified - we still need to
print the interface.
|
|
* bgpd/bgp_filter.c: "show ip as-path-access-list"
|
|
* redhat/zebra.spec.in: Fix errors for unpackaged files - fatal
error for rpm builds on newer rpm platforms.
|
|
* lib/if.c: (if_cmp_func) new function, compare interface names in
alphabetical order.
(if_create) Take name as argument and add interface in sorted order.
(if_get_by_name),(interface_cmd) fixup calls to if_create - see
above.
(if_init) register list comparison function.
* lib/if.h: Add comparison function, modify if_create prototype.
* lib/zclient.c: Modify call to if_create.
* ospfd/ospf_interface.c: (ospf_vl_new) modify call to if_create.
change sprintf to snprintf.
* zebra/kernel_socket.c: (ifm_read) modify call to if_create.
|
|
* lib/command.c: Add config_log_syslog_facility_cmd, to set
syslog facility. This was a commit to zebra.org on May 20,
merge in to zebra-pj.
|
|
* lib/command.c: Add config_log_syslog_facility_cmd, to set
syslog facility. This was a commit to zebra.org on May 20,
merge in to zebra-pj.
|
|
* ospf_packet.c (ospf_ls_upd_send_queue_event): get next route
node in body of the loop to avoid chance that route node
is unlocked and deleted before the next iteration tries to
get next route node.
|
|
* lib/version.h: add ZEBRA_URL (unused for now)
* lib/vty.c: CMD_ERR_NOTHING_TODO when reading conf file should not
be fatal. slight reformating.
* ospfd/ospf_zebra.c: ignore reject/blackhole routes if zebra sends
these type of routes. probably should be a new type of route to
allow daemons to more easily choose whether to redistribute them
- rathen than just a flag (eg for reject/blackhole).
reorder the is_prefix_default test for ZEBRA_IPV4_ROUTE_DELETE to
avoid the inverted test - slightly more readable.
* redhat/zebra.spec.in: Add ospfapi port to services file, if
with_ospfapi.
* zebra/rib.h: Change nexthop types to an enum.
* zebra/rt_netlink.c: run it through indent -nut.
Add nexthop_types_desc[] descriptive array for nexthop types.
(netlink_route_multipath) debug statements indicate which branch
they are in and print out nexthop type.
* zebra/zebra_rib.c: slight reformatting.
* zebra/zebra_vty.c: Pass ZEBRA_FLAG_BLACKHOLE flag to
static_add_ipv4() if Null0 route is configured. print out Null0 if
STATIC_IPV4_BLACKHOLE route, and ignore flags (shouldnt be
possible to set flags from vty) for config and show route.
|
|
* ospf_lsa.c: fix up some places where an NSSA specific define,
(OSPF_LSA_LOCAL_XLT) was referenced in if statements without being
ifdef'ed by HAVE_NSSA.
|
|
* zebra/if_proc.c: zebra does not close the file after reading
/proc/net/dev for retrieving interface names and statistics.
call fclose(fp) before returning from ifstat_update_proc()
or interface_list_proc()
|
|
* vtysh/Makefile.am: explicitely list the files required for
vtysh_cmd.c to be generated, to minimise spurious rebuilds.
|
|
* redhat/zebra.pam: Default to allow root
|
|
* bgp_vty.c: install the neighbor_set_peer_group_cmd,
neighbor_soft_reconfiguration_cmd and neighbor_unsuppress_map_cmd
family of commands into the VPNv4 address family config node.
|
|
* (global): Add/fixup NSSA ABR translation functionality
* ospfd.h: Adjust the NSSA ROLE defines. Rename STATE to TRANSLATE.
Rename the LSA_NSSA_GET define to LSA_OPTIONS_NSSA_GET.
* ospfd.c: Adjust to match changes to ospfd.h
* ospf_te.c: Adjust to match change to LSA_NSSA_GET.
* ospf_lsa.h: slights reformatting.
Add new NSSA functions, ospf_translated_nssa_compare() (not
currently used), ospf_translated_nssa_refresh() and
ospf_translated_nssa_originate().
* ospf_lsa.c: Implemented aforementioned new functions. Fix up
several NSSA hooks to /not/ be called for Type-5s which are
translated. Add additional hooks. Set the ROUTER_LSA_NT bit in
router-lsa flags if ABR does translation. New function,
ospf_lsa_translated_nssa_new() implemented. Dont register
translated LSAs for refreshing - instead we implicitly rely on
the ASBR refreshing the Type-7, and refresh the translated Type-5
at the same time. Some minor reformatting. Extra debug info added.
Also, existing debug statements modified to report LSA Id.
* ospf_flood.c: call ospf_translated_nssa_refresh() when refreshing
Type-7. minor reformatting.
* ospf_dump.c: Dump NSSA LSAs.
* ospf_asbr.h: slight reformatting. Export
ospf_external_route_lookup() (though, not used. probably will
undo this).
* ospf_abr.c: Slight reformatting in many places. Update to match
ospfd.h changes.
(ospf_abr_translate_nssa): make it work, using the new ospf_lsa
translation functions.
(Several places): change struct prefix * to struct prefix_ipv4 *.
(might as well do the casts at higher levels). Add more debug
info.
(ospf_abr_announce_stub_defaults): announce default to NSSA areas
too.
(ospf_abr_announce_nssa_defaults): do nothing. this function
probably should die. (see ospf_abr_announce_stub_defaults).
(ospf_abr_task_timer): run NSSA tasks.
|
|
* lib/command.c: Add missing HAVE_IPV6 defines.
see bug id #23: http://bugzilla.dishone.st/show_bug.cgi?id=23
|
|
* zebra/if_ioctl.c: Fix missing declaration for if_fake_index.
See bug id #24: http://bugzilla.dishone.st/show_bug.cgi?id=24
reported by Vsevolod Sipakov.
|
|
* ospf_apiserver.c: Add missing close bracket
|
|
* ospfd/ospf_apiserver.c: check for NULL from ospf_lookup()
|
|
* configure.ac: Fix recognition of FreeBSD if /dev/ip is found.
|
|
* zebra/kernel_socket.c: Update for new zebrad global struct
* zebra/ipforward_solaris.c: Add missing privs.h include. Uncomment
/dev/ip define.
* lib/zebra.h: Add typedefs for SunOS.
|
|
|
|
* (show_ip_ospf_database_header) Fix unconditional NSSA-dependent
printf.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) undo fix suggested
Mikael Lonnroth. As per Kamatchi Soundaram /
[zebra 19590], original behaviour is correct.
|
|
* ospf_vty.c: (global) add, unused, description array for lsa flags.
(show_ip_ospf_database_header): pretty print options, printf hex
numbers as 0x, print lsa flags and note if it is a translated LSA.
(show_lsa_detail_proc): print out OSPF_LSA_LOCAL_XLT LSAs.
* ospf_packet.c: (ospf_write) print out destination IP in debug info
if write fails.
|