| Age | Commit message (Collapse) | Author |
|---|
|
* lib/sockunion.c: Re-enable conversion of v6mapped INET6 sockunions to
regular INET sockunions, which was disabled in 0df7c9, as it leads to
failures in sockunion_cmp.
(sockunion_normalise_mapped) consolidate here
(sockunion_accept) remove conversion code altogether here - no sockunion
is created
(sockunion_get{sockname,peername}) normalise newly created sockunion.
|
|
* bgpd/bgp_packet.c: (bgp_open_receive) Try fix the little race in the FSM,
where a accept-peer that progress faster than realpeer gets closed down if
realpeer is still just in Connect, by allowing the realpeer to be
bgp_stop'ed and doing the regular swapping-of-FSM state.
|
|
* bgp_packet.c: (bgp_open_receive) the accept-peer hack can sometimes
cause a race between two peers that try to establish sessions to each other,
causing session setup to fail when it should have succeeded. In the worst
case, the race can 'loop', causing prolonged failure to establish sessions.
|
|
|
|
* ospf_spf.c: (ospf_spf_process_stubs) Track whether
parent router vertex is the root, so that the host-route
suppression logic need only be activated for such vertices.
Move the actual logic to ospf_intra_add_stub.
* ospf_route.c: (ospf_intra_add_stub) Main test of link moved
here, notionally more appropriate.
|
|
|
|
|
|
Add an struct interface paramenter and adjust the affected
code accordingly.
The old code was a mess looping over all interfaces several times
when one interface was added/changed.
* ospfd/ospfd.h: Add struct interface parameter to ospf_if_update()
* ospfd/ospf_zebra.c: Add ifp arg to ospf_if_update() calls.
(ospf_interface_address_delete) delete ospf_if_update() call,
redundant as function calls ospf_if_free() itself.
* ospfd/ospfd.c: (ospf_network_unset) handle deconfiguration here,
rather than ospf_if_update.
(ospf_network_run_interface) ospf_network_run, for
any given interface.
(ospf_network_run) move guts to previous, and use it.
(ospf_if_update) Adjust to take struct interface as argument, as
all callers have a specific ifp in mind.
Iterate over ifp's connected list and call ospf_network_run_interface
instead of ospf_network_run, turning this path into O(nm) rather
than O(n^2).
Adjust all code dealing with opsf_if_update and ospf_network_run to
pass the new struct interface * arg.
(some minor modifications and bug-additions by Paul Jakma).
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
'remotes/jocke/snmp_crosscompile'
|
|
|
|
|
|
accepted conns"
Revert commit d664ae1182c29b74b409bc8594b7bd0575e91ce9. An experimental
patch which violates RFC4271 quite badly, but managed to accidently sneak
its way in.
|
|
Update ospf_db_desc_send(), ospf_ls_upd_queue_send() and ospf_ls_req_send()
to always use OSPF_ALLSPFROUTERS for PtP links.
See RFC 2328, chap 8.1 for details:
"The IP destination address for the packet is selected as
follows. On physical point-to-point networks, the IP
destination is always set to the address AllSPFRouters."
Without this, it won't be possible to establish adjacencies on
multiple unnumbered links to the same router.
ChangeLog:
2008-07-25 Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* ospfd/ospf_packet.c: Set destination for PtP links to
OSPF_ALLSPFROUTERS.
|
|
PtP links with /32 masks adds host routes to the remote host,
see RFC 2328, 12.4.1.1, Option 1.
Make sure that such routes are ignored
|
|
--without-crypto
Autoconfig work by me, the rest was done by
"Kirill K. Smirnov" <lich@math.spbu.ru>
|
|
Dont use vty->index in show_ip_ospf_neighbor_all_cmd(),
It is invalid, use ospf_lookup() instead.
|
|
* lib/command.h: Add a RESTRICTED_NODE, intended for use with
anonymous, 'no login' vtys, to provide a subset of 'view' mode
commands.
* lib/command.c: Add RESTRICTED_NODE bits, nothing special, just
following VIEW_NODE.
* lib/vty.c: (vty_auth) enable authentication should fall back to
restricted/view node as appropriate.
(vty_create) init vty's to restricted/view node as appropriate,
for the 'no login' case.
(vty_{no_,}restricted_mode_cmd) config commands to enable
'anonymous restricted' in vty configuration.
(vty_config_write) 'anonymous restricted' config.
(vty_init) Install some commands to restricted mode, and the
'anonymous restricted' config commands into VTY_NODE.
* bgpd/*.c: Install some of the safe(r) BGP commands into
'restricted mode', i.e. lookup commands of non-sensitive data.
Useful with looking-glass route-servers.
|
|
* ChangeLog: Add back a dummy, top-level ChangeLog
* m4/Makefile.am: remove ChangeLog from EXTRA_DIST, why it was
listed there, who knows.
|
|
- Add more stuff, archive libraries, etc..
|
|
|
|
|
|
|
|
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* bgp_damp.?: (bgp_config_write_damp) remove useless check
of statically allocated config storage, and useless return
value
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: (process_subq) mark static
(rib_meta_queue_add) ditto
(meta_queue_new) ditt
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: static qualifier on local data
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: When doing a RIB update, routes in process of removal
should be ignored. This fixes bugs where a route is removed but a
recursive route is not changed.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* rt_netlink.c: (netlink_parse_info) Linux doesn't check privledges
on receive, so avoid the overhead of lowering and raising the
priviledges on each received message
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* rt_netlink.c: (netlink_parse_info) There can be harmless races
such as adding an existing route, or deleting an already deleted
route. Don't bother logging these unless debugging is turned on.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com>
* rt_netlink.c: (netlink_recvbuf) consolidate recvbuf setting
(netlink_socket) no need to set receive buffer on netlink sockets
generally
(kernel_init) set recvbuffer on the listen socket
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com>
* configure.ac: If netlink is available, then that is how the
initial routes and interfaces should be read, rather than through
/proc, so don't set IF_PROC.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra/rt_netlink.c: This change removes the overhead of twiddling
the socket twice on every route change. The netlink support has
two sockets, one is used for request/response and should always
block. The other is used for asynchronous notification and should
always be non-blocking.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra/rt_netlink.c: Update the netlink socket BPF to cancel out
unwanted ACKs on the listen socket by matching on the PID.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* */*: Fix various problems flagged by Sun Studio compiler.
- '<qualifier> <storage>' obsolescent in declarations
- empty statements (';' after ALIAS definitions)
- implicit declarations (e.g printstack in lib/log.c)
- "\%" in printf string instead of "%%"
- loops that return on the first iteration (legitimately, but
compiler can't really know), e.g. bgp_routemap.c
- internal declarations which mask prototypes.
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* lib/sockopt.c: (sockopt_tcp_signature) ifdef'ing hid variable
declaration for HAVE_DECL_TCP_MD5SIG && !GNU_LINUX, breaking
compile - fix.
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* {ospf6d,ripngd}/*: Finish job of marking functions as static, or
exporting declarations for them, to quell warning noise with
Quagga's GCC default high-level of warning flags. Thus allowing
remaining, more useful warnings to be more easily seen.
|
|
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com>
* lib/log.{c,h}: struct message argument should point to const
* */*.c: adjust to suit,
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
|
|
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra/rt_netlink.c: local functions should be static.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com>
* lib/hash.h: (struct hash) Hash comparator callback really
ought to treat storage behind arguments as constant - a compare
function with side-effects would be evil.
* */*.c: Adjust comparator functions similarly, thus fixing at least
a few compiler warnings about const qualifier being dropped.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Daniel Ng <daniel_ng11@lycos.com>
* ospf_nsm.c: (nsm_change_state) Refresh default route on
state change - a hack, but it works.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Jingjing Duan <Jingjing.Duan@sun.com>
* isisd/isis_dlpi.c: (open_dlpi_dev) Clearview-UV device nodes are
under /dev/net, try opening there before attempting style 1 or 2
names.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Jingjing Duan <Jingjing.Duan@sun.com>
* ospfd/: Remove the old checksum implementation and
use the consolidated version.
* isisd/: ditto, thus fixing isisd checksuming on big-endian.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Jingjing Duan <Jingjing.Duan@sun.com>
* isisd/isis_dlpi.c: Change ioctl from PFIOCSETF (transparent mode)
to I_STR (non-transparent mode). The old code resulted in no
filtering at all.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Jingjing Duan <Jingjing.Duan@sun.com>
* lib/checksum.?: (fletcher_checksum) implementation of
Fletcher checksum, as per RFC1008.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Timo Teräs <timo.teras@iki.fi>
* zebra/rt_netlink.c: (netlink_route{,_multipath) Set protocol and
scope appropriately for both NEW and DELROUTE messages, to avoid
wiping out non-zebra routes on delete.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 roy <quagga@de.vio.us>
* lib/vty.c: (vty_delete_char) move check for authentication
down a bit, so we do the delete, but still not re-write of line.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: fix AC_ARG_ENABLE argument to match help string,
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: add a configure flag and autoconf macro, which will
determine if your toolchain supports PIE.
* */Makefile.am: add corresponding CFLAGS and LDFLAGS into
appropriate places.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2007-08-31 Paul Jakma <paul.jakma@sun.com>
* (general) Add 'bgp open-accept' option, to allow bgpd to send OPEN
on accepted connections, i.e. to not wait till after
collision-detect to send OPEN, which appears to be allowed in
RFC4271. This may help speed up establishing sessions, or help
avoid FSM problems with sessions to certain peers. Not enabled by
default though.
|
|
(cherry picked from c5b85efd767b82fcb46b20ac6202c828d91aacb3 commit)
|
