summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-28[ospfd] enable more OSPF cost command aliasesDenis Ovsienko
The following syntax forms were not historically supported by Quagga, although IOS accepted them w/o a problem: no ip ospf cost <1-65535> no ospf cost <1-65535> no ip ospf cost <1-65535> A.B.C.D no ospf cost <1-65535> A.B.C.D From now on Quagga also supports these variants.
2009-09-01zebra: Fix router advertisements for non-Ethernet link layer addressesDavid Ward
* rtadv.c: round up when calculating the link-layer address option length; add padding to the option if needed to end on an octet boundary
2009-08-28release: 0.99.15Paul Jakma
* configure.ac: Bump to 0.99.15
2009-08-28ospf6d: bug #529, fix endianness problem in earlier commit Tom Henderson
* ospf6_lsa.c: (ospf6_lsa_age_current) arithmetical compares make no sense in non-host order..
2009-08-28bgpd: fix md5 set on listen socketsStephen Hemminger
* bgp_network.c: (bgp_md5_set) Missing piece from earlier listener change did not get ported from Vyatta code into upstream. The list listener_sockets changed from (int *) to (struct bgp_listener *).
2009-08-28lib/trivial: str2prefix checks return of inet_pton in fragile wayPaul Jakma
* prefix.c: (str2prefix_ipv6) inet_pton succesful return is presumed to be 1, rather than the "not zero" the man page describes - seemed fragile.
2009-08-28zebra: Add an example config file for testzebraPaul Jakma
* testrib.conf: Example config file for testzebra
2009-08-28zebra: test_main.c should be a bit more helpful about its usagePaul Jakma
* test_main.c: If required arguments are missing, say that.
2009-08-28lib: if_lookup_by_name should be more robust to null argumentPaul Jakma
* if.c: (if_lookup_by_name) shouldn't crash just cause we got a NULL name
2009-08-28ospfd: Make sure priority is respected.Joakim Tjernlund
* ospf_ism.c (ospf_dr_eligible_routers) should test for priority > 0 instead of != 0 as ospf_nbr_new () initially sets prio to -1
2009-08-28ospfd: Tighten up the connected check for redistributionJoakim Tjernlund
* ospf_zebra.c: (ospf_distribute_check_connected) check to make filter out routes matching connected routes was matching against OSPF networks, which can be far more general than the actual connected interfaces. Fix.
2009-08-13all: check return value from daemon() callStephen Hemminger
* */*main.c: (main) Current versions of Gcc warn if the return value for daemon() is not checked. So add a simple test and exit on failure.
2009-08-13bgp: missing pieces from listener patchStephen Hemminger
* bgp_network.c: (bgp_accept) The code in current git will crash as part of the revised listener code is missing. The new listener thread code passes a pointer to a bgp_listener structure, not the bgp pointer. The old code always got a NULL for bgp pointer, so that is now hard coded.
2009-08-13bgp: compiler warning fixStephen Hemminger
* bgp_filter.h: Gcc complains the function prototype is not correct because the function argument is using old K&R style.
2009-08-13ospfd: fix performance problem with redistribute deleteStephen Hemminger
Doing redistribute delete with full BGP table was taking 30 minutes, this drops it down to less than a second. * ospf_lsa.c: (ospf_lsa_maxage) When flushing lots of entries the performance is terrible because it looks up each LSA entry through ospf_lsa_maxage_exist before deleting causing O(N^2) performance. Use a new OSPF_LSA_MAXAGE flag instead of scan - and maintain it. (ospf_lsa_maxage_exist) removed (ospf_lsa_maxage_delete) maintain OSPF_LSA_MAXAGE flag
2009-08-11ospfd: Make sure route table is recalculated.Joakim Tjernlund
In some cases ospfd does not recalc the route table. This happens when ospfd receives an old LSA which will trigger recalc but the this recalc will fail because all interfaces isn't up yet. Next LSA that is originated matches the old one so no recalc will be performed. This problem has been observed when there are only 2 ppp I/Fs in an area, both go down at the same time, then they come up again with a few seconds apart. * ospf_lsa.c: (ospf_{router,network}_lsa_install) avoid a needless scheduling of SPF. (ospf_lsa_different) fix bug in LSA comparison that would lead to the described failure to schedule SPF.
2009-08-11ospfd: Make "Packet ... received on wrong link" conditional on debugPaul Jakma
* ospf_packet.c: make this message conditional on 'debug ospf event', as it be easily triggered with, e.g., multiple subnets sharing same physical network. E.g, see bug #532.
2009-08-05bgpd: Fix mistakes in applying 'allow inbound connections to non-default view'Paul Jakma
* bgpd.c: (peer_lookup_with_open) Bodged application of previous patch meant the second loop around bgp->peer wasn't included in the loop around bm->bgp as it was supposed to be. Fix..
2009-08-03ospfd: neuter some compiler warningsPaul Jakma
* ospf_lsa.c: (link_info_set) Use %zd for size_t - C99 is old enough now. Lots of similar warnings all over the code. (ospf_lsa_translated_nssa_compare) Unused func - delete.
2009-08-03ospfd: update some commentsPaul Jakma
* ospf_{spf,lsa}.c: remove out of date comment; add comment on some non-obvious code; Make note of a possible scaling problem.
2009-08-03ospfd: Change struct ospf_path *oi to ifindex.Joakim Tjernlund
* global: In struct ospf_path, change struct ospf_interface *oi to int ifindex. It is unsafe to reference *oi as an ospf interface can be deleted under your feet. Use a weak reference instead.
2009-07-30ospfd: Discriminate better when selecting links between vertices in SPFJoakim Tjernlund
* ospf_spf.c: (ospf_get_next_link) One must check the vertex type, Router or Network, to select type link to match against. Link type 1 has neighbour router ID in link_id and link type 2 has IP address of DR. Since router id may have same value as an existing IP address one risks matching a router ID against a DR.
2009-07-30[bgpd] delete erroneous extra brace..Paul Jakma
2009-07-30bgpd: Workaround for invalid MBGP next hopMichael Lambert
* bgp_attr.c: (bgp_mp_reach_parse) There are some interoperability issues for MBGP (particularly IPv4 multicast NLRI) between different implementations. In order to get some next hops to install correctly in the BGP tables, it appears to be necessary to copy the multiprotocol next hop into the base next hop field. This is related to differences in RFC 2283 and RFC 2858.
2009-07-30[doc] Update HACKINGPaul Jakma
* HACKING: Update to reflect git stripping []'s, and to allow for more discretion to avoid redundancy in commit messages.
2009-07-28ospfd: Make ospf_if_lookup_recv_if() find the right unnumbered i/fJoakim Tjernlund
This function will return the interface for the first matching remote address for PtP i/f's. That won't work for multiple unnumbered i/f's as these may all have the same address. Pass in the struct interface pointer, ifp, to find the correct set of oi's to search in. This also reduces the size of the search list, making it faster. * ospfd/ospf_interface.c: Add struct interface * param to ospf_if_lookup_recv_if() to select the right list to search in. * ospfd/ospf_interface.h: ditto. * ospfd/ospf_packet.c: Pass new ifp argument to ospf_if_lookup_recv_if()
2009-07-28ospfd: export ospf_if_table_lookup() and use it in ospf_network_run_interface()Joakim Tjernlund
Makes it possible to run OSPF on multiple PtP interfaces with the same remote address. * ospfd/ospf_interface.c: Export ospf_if_table_lookup(). * ospfd/ospf_interface.h: ditto. * ospfd/ospfd.c: (ospf_network_run_interface) Use ospf_if_table_lookup() to determine whether OSPF is already configured for a subnet and interface.
2009-07-28bgpd/trivial: Fix indentation in previousPaul Jakma
2009-07-28bgpd: Allow inbound connections to non-default viewSteve Hill
* bgpd.c: (peer_lookup) Search through all BGP instances for matches, not just the default instance, if no specific instance is given. (peer_lookup_with_open) same.
2009-07-28bgpd: fd leak in bgpdSteve Hill
* bgp_fsm.c: I have found an fd leak in bgpd that is caused by the 'new' Clearing state. I've been seeing it from hold timer failures, but it can also be triggered by other things. When Hold_Timer_expired fires in Established state, a notify is sent and BGP_Stop event queued. The fsm then transitions into Clearing state. That is the problem; When the BGP_Stop event is serviced, the state table says to ignore it while in Clearing. Thus bgp_stop is not called and the fd leaks. Previously the peer would be in Idle state, which correctly handles the BGP_Stop event. Fix by making bgp_stop safe to call from Clearing state, without losing ClearingCompleted events, and then ensuring it is called prior to transition from Clearing->Idle.
2009-07-28[zebra] Fix crash in test_zebraPaul Jakma
* kernel_null.c: we're pretending to add an address, so set IFC_REAL. If this isn't done, calling into the 'got address from kernel' half of zebra will implicitly-withdraw the ifc, which could cause a crash in test_zebra.c.
2009-07-28Merge remote branch 'origin/master'Paul Jakma
2009-07-28bgpd: Delete AS_CONFED_SEQUENCE when prepending an AS_SEQUENCE type segmentVasilis Tsiligiannis
AS_CONFED_SEQUENCE segment should always be deleted when prepending (e.g. with a route-map) an AS_SEQUENCE segment to an AS path. Otherwise, AS_CONFED_SEQUENCE will not be deleted later when updating EBGP peers (since it is not the leftmost segment) and will leak outside the confederation.
2009-07-28bgpd: Implement BGP confederation error handling (RFC5065, Par. 5)Vasilis Tsiligiannis
This patch implements BGP confederation error handling in Quagga as described in RFC5065, paragraph 5. * bgp_aspath.c: (aspath_confed_check, aspath_left_confed_check) new functions * bgp_attr.c: (bgp_attr_aspath_check) apply previous and NOTIFY if there's a problem.
2009-07-28[global] interface flags format warningsStephen Hemminger
*/*: ifp->flags is 64 bit unsigned which can not be handled by %l on 32 bit architectures - requires %ll and the appropriate cast.
2009-07-28bgpd: start listener on first instanceStephen Hemminger
Start BGP listener only after first instance is started. This helps the security if BGP is not used but daemon is started. It also addresses some issues like MD5 not working on listener unless IPV6 configured (because listener was not in list); as well as compiler warnings. * bgp_network.c: (bgp_listener) listen socket creation consolidated here (bgp_socket) Use bgp_listener * bgpd.c: (bgp_get) call bgp_socket on creation of first struct bgp. (bgp_init) remove bgp_socket call. * memtypes.c: Add MTYPE_BGP_LISTENER
2009-07-28bgpd: peer action table static/constStephen Hemminger
bgpd.c: (various tables) only used in one place and are immutable.
2009-07-27ripd: set IP TOS for control socketStephen Hemminger
* ripd.c: (rip_create_socket) RIP packets should go out with Type Of Service (DSCP) set to Internet control (like OSPF and BGP).
2009-07-27[bgpd] Restore ability of 'neighbor ... update-source' to take interface namePaul Jakma
* bgp_vty.c: (BGP_UPDATE_SOURCE_STR) Restore ability to accept arbitrary interface names for the 'neighbor ... update-source' command - shouldn't have been deleted. (BGP_UPDATE_SOURCE_STR) Add help for same.
2009-07-24[zebra] do not touch socket before pidfile lockingDenis Ovsienko
Move zserv socket creation code into zebra_zserv_socket_init() and call it only after pidfile lock has been acquired exclusively. This keeps subsequent zebra daemons from deleting the working socket of an already running process (bug #403).
2009-07-21[doc] zebra.8 via Christian Hammers (#531)Thijs Kinkhorst
The man page for zebra(8) mentions as port number to connect to 2602, but it's acutally 2601 (as shown in /etc/services). 2602 belongs to ripd. Attached patch fixes this typo.
2009-07-21[build] Bump release to 0.99.14Paul Jakma
2009-07-21[bgp] Fix nexthop reachability check on confederationsVasilis Tsiligiannis
* bgp_route.c: (bgp_update_main) Nexthop reachability should be checked for confederations too in case a prefix is received from more than one confederation peers.
2009-07-21[bgpd] fix typo made by paul in previous commitPaul Jakma
2009-07-21[bgpd] Avoid zombie accepted peer entriesTimo Teräs
Currently, when accepting the connection, it can be left as zombie, when the peer just initiates a connection, but never sends data (and the TCP connection end packets are lost). This happens because for accepted connections a temporary new peer entry is created until OPEN message is exchanged, and this temporary peer entry does not get the hold time parameter set at all. * bgp_network.c: (bgp_accept) Set hold time and keepalive values for ACCEPT peers.
2009-07-21[bgpd] Small buffer overrun in bgp_clear_node_queue_initNick Hilliard
* bgp_route.c: (bgp_clear_node_queue_init) fix buffer overrun.
2009-07-21[zebra] Silence noisy process_subqChris Caputo
zebra_rib.c: process_subq(): #ifdef out debug code.
2009-07-19[bgpd] Stability fixes including bugs 397, 492Chris Caputo
I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
2009-07-19[bgpd] Fix compiler warnings related to MD5Chris Caputo
This patch fixes: bgp_network.c: In function 'bgp_md5_set': bgp_network.c:107: warning: cast from pointer to integer of different size bgp_network.c: In function 'bgp_socket': bgp_network.c:447: warning: cast to pointer from integer of different size
2009-07-19[build] fix default CFLAGS and squish warningPaul Jakma
* configure.ac: Move down the AC_SYS_LARGEFILE test - it was setting CFLAGS and so disabling the default CFLAGS setting section. Squish warning by adding AC_CONFIG_MACRO_DIR on the reccommendation of autoreconf.