summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-03bgpd: use XCALLOC to allocate bgpd damp arrayStephen Hemminger
* bgpd: (bgp_damp_parameter_set) The BGP reuse_index is not initialized properly. This would cause sporadic crash when disabling dampening. Use XCALLOC correctly and the right size array is initialized and no memset is needed.
2011-08-03lib: fix more format warnings (#637)Christian Hammers
The following patch was also neccessary to compile. * command.c: (config_logmsg_cmd) use "%s" format spec * if.c: (connected_log) ditto
2011-08-02ospfd: remove useless RFC1583 checkAlexandre Chappuis
* ospf_route.c: Function ospf_asbr_route_cmp is called uniquely from ospf_route_cmp() when the flag OSPF_RFC1583_COMPATIBLE is not set. Therefore, the check that the flag is set doesn't make sense at all and it can consequently be removed without doing any harm. Signed-off-by: Alexandre Chappuis <alc@open.ch> Signed-off-by: Roman Hoog Antink <rha@open.ch>
2011-08-01lib: remove unused variableDenis Ovsienko
* sockopt.c (getsockopt_ifindex): "ifindex" was never used
2011-08-01delete CVS keywordsDenis Ovsienko
2011-08-01ospf6d: Remove obsolete codeTom Goff
* ospf6_area.c: (ospf6_area_delete) Get rid of unused code that refers to a nonexistent function and structure member.
2011-08-01lib: zlog should clean up its memoryTom Goff
* log.c: (closezlog) Also free the dynamically allocated filename when a log is closed.
2011-08-01bgpd: Fix display of unsigned attributesWataru Tanitsu
* bgp_route.c: (route_vty_out*) The local prefix, metric and weight values are all stored as uint32_t. Change the format to %u so that large values are not displayed as negative integers.
2011-08-01ospfd: Lower level of some common messages from info to debugPaul Jakma
* ospf_{ism,network}.c: Certain oft-repeated but trivial messages should be debug log level, not info, to avoid spamming 'terminal monitor'
2011-08-01lib: prefix.c nano-optimisationPaul Jakma
* lib/prefix.c: (prefix_match) nano-optimisation, let it return early without copying pointers.
2011-07-29Merge remote-tracking branch 'origin/master'Paul Jakma
2011-07-29Merge branch 'attr-errors'Paul Jakma
Contains BGP fixes: - set extcommunity crash: tihs patch tries to make the refcounting more robust but does not fully solve the problem, sadly. - BGP attribute error handling: Little testing.
2011-07-18bgpd: Fix compile failure if IPv6 build was disabled.Paul Jakma
* bgp_route.c: ({no_,}ipv6_bgp_network_ttl_cmd) depends on ipv6_bgp_network which is HAVE_IPV6, so these should be too. (bgp_route_init) and the installs should be similarly ifdefed
2011-07-17bgpd: rename SAFI 3 according to RFC4760Denis Ovsienko
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use that was never fully implemented, so it is deprecated by this document. * zebra.h: rename macro * bgp_fsm.c: (bgp_graceful_restart_timer_expire, bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update * bgpd.c: (peer_nsf_stop): update * bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case any more
2011-07-15configure: fix OpenPAM detectionDenis Ovsienko
2011-07-14configure: fix FreeBSD header detection (BZ#408)Denis Ovsienko
This change is based on Xavier Beaudouin's patch (which fixes detection of 3 config.h macros on FreeBSD without any impact to Linux build of Quagga) and FreeBSD port patch (which fixes 5 config.h macros, but breaks the Linux build), it fixes 5 macros and works for both FreeBSD 8 and Linux.
2011-07-14bgpd: more SAFI fixesDenis Ovsienko
Two macros resolving to the same integer constant broke a case block and a more thorough merge of BGP_SAFI_VPNV4 and BGP_SAFI_VPNV6 was performed. * bgpd.h: MPLS-labeled VPN SAFI is AFI-independent, switch to single * macro * bgp_capability_test.c: update test data * bgp_mp_attr_test.c: idem * bgp_route.c: (bgp_maximum_prefix_overflow, bgp_table_stats_vty) update macro and check conditions (where appropriate) * bgp_packet.c: (bgp_route_refresh_send, bgp_capability_send, bgp_update_receive, bgp_route_refresh_receive): idem * bgp_open.c: (bgp_capability_vty_out, bgp_afi_safi_valid_indices, bgp_open_capability_orf, bgp_open_capability): idem * bgp_attr.c: (bgp_mp_reach_parse, bgp_packet_attribute, bgp_packet_withdraw): idem
2011-07-13Merge remote-tracking branch 'polymorf/master'Greg Troxel
2011-07-13bgpd: fix SAFI for for MPLS labeled VPN-IPv6Denis Ovsienko
* bgpd.h: change value of BGP_SAFI_VPNV6 to 128 (RFC4659, BZ#659) * bgp_route.c: (bgp_table_stats_vty) fix length argument to strncmp()
2011-07-12bgpd: consistent log msg format (BZ#565)heasley
2011-07-12ospf6d: check MTU with message header size in mindDmitrij Tejblum
* ospf6_message.c: (ospf6_packet_max): new function, return maximum IPv6 payload on an interface; (ospf6_hello_send, ospf6_dbdesc_send, ospf6_dbdesc_send_newone, ospf6_lsreq_send, ospf6_lsupdate_send_neighbor, ospf6_lsupdate_send_interface, ospf6_lsack_send_neighbor, ospf6_lsack_send_interface): compare message size with the maximum payload instead of the MTU.
2011-07-12ospf6d: copy "mtu-ignore" option from ospfdDmitrij Tejblum
"mtu-ignore" is an option ospfd used to mimic from the vendor's implementation, now ospf6d will also implement it. * ospf6_interface.h: extend ospf6_interface structure by one flag * ospf6_interface.c: (ipv6_ospf6_mtu_ignore, no_ipv6_ospf6_mtu_ignore): new declarations; (ospf6_interface_create): show initial value for consistency; (ospf6_interface_show): print flag status * ospf6_message.c: (ospf6_dbdesc_recv): consider interface-specific flag when checking MTU
2011-07-12version RE-0.99.17.1Denis Ovsienko
2011-07-05bgpd: Remove AS Path limit/TTL functionalityPaul Jakma
* draft-ietf-idr-as-pathlimit doesn't seem to have gone anywhere, and its author does not think it will make progress in IDR. Remove all support introduced for it, but leave stubs for the commands to avoid breaking any configurations. Basically reverts cecab5e9725792e60a5e4b473e238a14cd85815d. (cherry picked from commit c8f3fe3063cb9ff193b13011cfbda3e605395340) Conflicts: bgpd/bgp_attr.c (caused by c8e7b895, resolved)
2011-07-04bgpd/security: CVE-2010-1674 Fix crash due to extended-community parser errorPaul Jakma
* bgp_attr.c: (bgp_attr_ext_communities) Certain extended-community attrs can leave attr->flag indicating ext-community is present, even though no extended-community object has been attached to the attr structure. Thus a null-pointer dereference can occur later. (bgp_attr_community) No bug fixed here, but tidy up flow so it has same form as previous. Problem and fix thanks to anonymous reporter. (cherry picked from commit 0c46638122f10019a12ae9668aec91691cf2e017)
2011-07-04doc: fix "ipv6 address" interface command syntax (#608)Denis Ovsienko
(cherry picked from commit e6844aa5d23cf56dd1f31afc96e8145ab188953f)
2011-07-04ripd: resolve debug statements issue (bug 442)Andrew J. Schorr
...A nasty bug, if you forgot to disable debugging, stored the config and reboot your machine - if you really depend on ripd, then the machine will not fully come back on the network, because ripd fails. (cherry picked from commit 0fa0335316ce14a79ea4bbb0c40e1322c9941dd3)
2011-07-04bgpd: VTY string fixes for debug commandsDavid Ward
* bgpd/bgp_debug.c: fix VTY strings for BGP debug commands to match correct syntax (cherry picked from commit 6e22b9017e1ae2ce61c383b1b2b63973207704ac)
2011-07-04bgpd: fix handling of "Unsupported Capability"Dmitrij Tejblum
* bgp_packet.c: (bgp_notify_receive) justify the difference between BGP_NOTIFY_OPEN_UNSUP_PARAM and BGP_NOTIFY_OPEN_UNSUP_CAPBL cases, as it is explained in RFC5492, page 3, paragraph 1. "Unsupported Capability" error does not mean, that the peer doesn't support capabilities advertisement -- quite the opposite (if the peer would not support capabilities advertisement, the code would be "Unsupported Optional Parameter"). Thus there is no reason to mark the peer as one non-supporting capabilities advertisement. Example: suppose the peer is in fact IPv6-only, but we didn't configure anything address-family specific for it. Then, the peer would refuse the session with "Unsupported Capability" code. If we internally set the peer as non-supporting capabilities advertisement after that, we will not be able to establish the session with it ever, even with a fixed configuration -- IPv6-only BGP session cannot be established without capabilities. In practice an edge case would be seen as the same IPv6 peer working with its "neighbor" block read from bgpd.conf, but not working, when slowly input in "conf t" mode. (cherry picked from commit c7aa8abd8788c3607ad0131f02e892cf92221e40)
2011-07-04ospf6d: fix crash in SPF calculationDmitrij Tejblum
* ospf6_spf.c: Don't replace a node with another node with a lower number of hops, instead get them from the queue in the correct order. (Actually, the replacement crashed the ospf6d daemon rather than worked.) (cherry picked from commit 403138e189c24f6867824c4eeb668d11564e1ca0)
2011-07-04bgpd: fix community-list error message spellingDenis Ovsienko
* bgp_vty.c: (community_list_perror, show_ip_community_list_arg, show_ip_extcommunity_list_arg) fix spelling (cherry picked from commit b729294c8c5c6f2af8ddf6cfbea2374b6faabe9d)
2011-06-28fix typoRoman Hoog Antink
2011-06-28Omit --opaque-lsa from build (now default).Greg Troxel
2011-04-22ospf6d: copy "mtu-ignore" option from ospfdDmitrij Tejblum
"mtu-ignore" is an option ospfd used to mimic from the vendor's implementation, now ospf6d will also implement it. * ospf6_interface.h: extend ospf6_interface structure by one flag * ospf6_interface.c: (ipv6_ospf6_mtu_ignore, no_ipv6_ospf6_mtu_ignore): new declarations; (ospf6_interface_create): show initial value for consistency; (ospf6_interface_show): print flag status * ospf6_message.c: (ospf6_dbdesc_recv): consider interface-specific flag when checking MTU
2011-04-13zebra: trivial warning fixPaul Jakma
* zebra_routemap.c: (route_set_src) get rid of the dummy family variable.
2011-04-13bgpd: trivial format / warning fixesPaul Jakma
* bgp_aspath.c: (assegments_parse) just bail early if length doesn't match and fix the formatting. * bgp_network.c: add include needed for set_nonblocking * bgp_packet.c: formatting
2011-04-13ospf: Fix OSPF API and ospf-te LSA refreshers to match recent API changePaul Jakma
* ospf_apiserver.{c,h}: (ospf_apiserver_lsa_refresher) refreshers must now return the refreshed LSA. * ospf_te.{c,h}: (ospf_mpls_te_lsa_refresh) ditto * ospf_api.c: trivial compiler warning fix
2011-04-04Fix authorship of previous ospf6d commitPaul Jakma
2011-04-04ospf6d: fix crash if zebra_interface_state_read can't find interfaceIngo Flaschberger
* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read may return NULL, if it can't find an interface, deal with it.
2011-04-04ospf6d: fix crash if zebra_interface_state_read can't find interfacePaul Jakma
* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read may return NULL, if it can't find an interface, deal with it.
2011-04-01bgpd: fix memory leak when deleting a communityMichael Lambert
* bgp_routemap.c: (route_set_community_delete) When deleting a community in a route-map the old community was being orphaned. Like the description of the same code in route_set_community, this is a hack, not a true fix.
2011-04-01Revert "bgpd: "Intern" communities in route maps"Paul Jakma
This reverts commit 2c9fd7e07283b8904ef20030c9dadb032e999b12.
2011-03-30doc: Add dependency for quagga.pdf make targetPaul Jakma
* doc/Makefile.am: pdf target needs to depend on all the input files.
2011-03-29Merge remote-tracking branch 'remotes/quagga/master'Paul Jakma
2011-03-29bgpd: Fix merge error in jhash commitPaul Jakma
* bgp_attr.c: (attrhash_key_make) 98e30f should have changed jhash2 to jhash. These kinds of merge errors would be reduced and life would be easier if people would submit fully-formed fixes that could be chucked directly into git-am.
2011-03-28bgpd: refine the setting up of GTSMStephen Hemminger
* bgpd.h: Add error code for setting GTSM on iBGP * bgpd.c: (peer_ttl_security_hops_set) use previous error code and signal incompatibility of GTSM+iBGP to vty. Consider the session state when setting GTSM, and reset Open/Active peers to let them pick up new TTL from start.
2011-03-24build: treat opaque-lsa default correctly for ospfapiGreg Troxel
In deciding whether to default ospfapi to on or off, use the same rule for opaque-lsa as earlier: != no rather than = yes, so that not having set it implies yes.
2011-03-24lib: Add support for IPv6 ttl securityStephen Hemminger
* sockunion.c: (sockopt_minttl) Add IPv6 support for min hop count. The kernel support is Linux kernel 2.6.35 or later.
2011-03-24bgpd: Cleanups & fixes for minttl / GTSMStephen Hemminger
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup. ({no_,}neighbor_ttl_security) ditto. * bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only need to be done on transition. * sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
2011-03-23bgpd: RFC 5082 Generalized TTL Security Mechanism supportNick Hilliard
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used to verify that incoming packets have been sent from neighbours no more than X IP hops away. In other words, this allows packets that were sent from further away (i.e. not by the neighbour with known distance, and so possibly a miscreant) to be filtered out. * lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL using the IP_MINTTL socket opt. * bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command error for minttl. (struct peer) add a config variable, to store the configured minttl. (peer_ttl_security_hops_{set,unset}) configuration handlers * bgpd.c: (peer_group_get) init gtsm_hops (peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and GTSM can't both be active for a peer at the same time. (peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with ebgp_multihop. (bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X". * bgp_vty.c: (bgp_vty_return) message for BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK (peer_ebgp_multihop_{un,}set_vty) * bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate. (bgp_connect) ditto for outbound.
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-09 23:45:46 +0000