summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-21lib: fix logging of ZEBRA_HELLO messageDenis Ovsienko
2012-02-16lib: add THREAD_TIMER_MSEC_ON()Everton Marques
* lib/thread.h: new timer macro, millisecond precision (this was cherrypicked from pimd to isolate all non-contained changes) From: Everton Marques <everton.marques@gmail.com> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-02-14isisd: implement MD5 circuit authenticationFritz Reichmann
* Replace command "isis passwd" with "isis passwd {clear|md5}" * Verify HMAC MD5 on ISIS Hello PDUs * Add HMAC MD5 authentication to md5.h/md5.c from RFC2104
2012-02-14isisd: unexpected kernel routing table (BZ#544)Fritz Reichmann
Fix bug 544: isisd produces an unexpected routing table for wide-metric. * isis_spf.c: Accept VTYPE_PSEUDO_TE_IS and VTYPE_NONPSEUDO_TE_IS vertex types for SPF calculation * isis_pdu.c: Change order of TLVs to match Cisco to make bitwise comparison easier for Wireshark * isis_tlv.c: EXTREME_TLV_DEBUG for TLV debugging instead of EXTREME_DEBUG
2012-02-14isisd: fix wrong next-hops from SPFPeter Szilagyi
The forwarding table was filled with wrong next-hops, and which is even worse, it was done in a totally non-deterministic way. The next-hop set for an IP prefix by isisd was the neighbor IS from which the flooded LSP about the IP prefix was arrived. So, if an IS received all the LSPs through its, say, eth0 interface, all entries in the forwarding table contained the next IS reachable via eth0 as the next-hop. The solution is to propagate the correct next-hop further from node to node as the SPF algorithm traverses the graph and selects the next node to be added to the set of already covered nodes. Also, the construction of the tentative node list (the nodes where the shortest path is not known yet) was buggy: if a node was already a member of this list with a certain path cost, and an alternative path was found to it with a lower cost while processing a pseudo-node LSP, it was not added to the list. This way, the path selected by isisd for a certain prefix was the first one it encountered during the LSDB processing. Signed-off-by: Fritz Reichmann <fritz@reichmann.nl>
2012-02-14isisd: send proper LSP after DIS electionPeter Szilagyi
After an IS has been elected as the Designated IS for a LAN, it did not refresh the content of the pseudo-node after a new node has been connected to the same LAN. Instead, the periodically reoriginated pseudo-node LSP still contained only those IS neighbors that were already present when the DIS election process was commenced. The fix for the problem schedules an LSP regeneration rather than just reoriginating the same LSP with the old content. Signed-off-by: Fritz Reichmann <fritz@reichmann.nl>
2012-02-14isisd: fix circuit state machinePeter Szilagyi
isisd has a so-called circuit state machine that takes care about the interface state changes, such as initializing, down, up. When an interface was brought down by a link failure, the interface information was deleted and set to NULL. When the link was restored later, the interface was looked up by the old pointer, but since it was cleared, it was never found again, resulting in an interface never entering the up state again. Also, the program regularly crashed because of a deleted pointer in the same context which was later accessed without any further checking. Signed-off-by: Fritz Reichmann <fritz@reichmann.nl>
2012-02-11ospf6d: fix out of bounds write in ospf6_prefix_apply_maskDavid Lamparter
ospf6_prefix_apply_mask would write one byte beyond the 4/8/12 bytes allocated for prefixes of length 32/64/96. based on report and patch by Jon Andersson <jon.andersson@thales.no> Reported-by: Jon Andersson <jon.andersson@thales.no> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-01-26zebra: justify rtadv VTY commands with argumentsDenis Ovsienko
ipv6 nd ra-interval ipv6 nd ra-lifetime ipv6 nd reachable-time ipv6 nd home-agent-preference ipv6 nd home-agent-lifetime ipv6 nd router-preference Calls to atoi() and atol() are replaced with VTY_GET_INTEGER_RANGE() macro, command patterns are clarified and aliases of some commands are added for consistency. Other changes are listed below. * zebra/rtadv.c * ipv6_nd_ra_interval_msec(): resolve -Wsign-compare * ipv6_nd_ra_interval(): idem * rtadv_init(): update to list new aliases * doc/ipv6.texi: update to match current implementation
2012-01-26zebra: freshen RFC references in rtadvDenis Ovsienko
RFC2461 was replaced by RFC4861 RFC3775 was replaced by RFC6275 draft-ietf-mip6-mipext-advapi-03 was replaced by RFC4584
2012-01-26zebra: use prefix_ipv6 in rtadv_prefixDenis Ovsienko
rtadv_prefix.prefix was casted to "struct prefix_ipv6" and had the same size, make it exactly this type to make the code a bit cleaner.
2012-01-26zebra: clear host bits of ND RA prefix optionDenis Ovsienko
RFC4861 4.6.2. Prefix Information Prefix An IP address or a prefix of an IP address. The Prefix Length field contains the number of valid leading bits in the prefix. The bits in the prefix after the prefix length are reserved and MUST be initialized to zero by the sender and ignored by the receiver. * rtadv.c * ipv6_nd_prefix(): add missing call to apply_mask_ipv6() * no_ipv6_nd_prefix(): idem
2012-01-26zebra: justify some IPv6 ND RA timers wrt RFCDenis Ovsienko
There was a regression introduced with the previous commit: "ipv6 nd home-agent-lifetime 1800000" appeared by default in every interface section of running-config, although this command is invalid in this context. Troubleshooting and bugfixing of the issue tracked out several bugs in router advertisement procedures, some of which are fixed in this commit. * zebra/interface.c * if_zebra_new_hook(): update to treat -1 as "uninitialized" * nd_dump_vty(): idem * zebra/rtadv.c * rtadv_send_packet(): update processing of "router lifetime" field, "home agent" option and "home agent lifetime" field to conform to RFC6275 better * ipv6_nd_ra_interval_msec(): update MaxRtrAdvInterval range check, make sure it never exceeds (initialized) AdvDefaultLifetime * ipv6_nd_ra_interval(): idem * ipv6_nd_ra_lifetime(): update AdvDefaultLifetime range check, make sure it never falls below MaxRtrAdvInterval * ipv6_nd_homeagent_lifetime(): update HomeAgentLifetime range check * no_ipv6_nd_ra_lifetime(): update to treat -1 as "uninitialized" * no_ipv6_nd_homeagent_lifetime(): idem * rtadv_config_write(): idem
2012-01-26zebra: fix output of IPv6 ND RA optionsDenis Ovsienko
The following options could be configured for an interface, but were never visible in the config text: ipv6 nd adv-interval-option ipv6 nd home-agent-preference ipv6 nd home-agent-lifetime ipv6 nd home-agent-config-flag
2012-01-23fix zebra protocol after MP-BGP changesDenis Ovsienko
The previous commits modified both zebra and bgpd for additional SAFI field, but not any other routing daemon, which led to zebra daemon crashing with failed assertion.
2012-01-23zebra: fix recent MP-BGP commits for FreeBSDDenis Ovsienko
2012-01-23zebra: Removal of the following warning messagesG.Balaji
warning: too many arguments for format [-Wformat-extra-args]
2012-01-23bgpd: Addition of ipv6 network command in Multicast address family mode.G.Balaji
The patch adds the ipv6 network command in the BGP multicast address family mode.
2012-01-23zebra: IPv6 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv6 SAFI_MULTICAST BGP routes into the RTM's RIB. 2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the RTM's RIB.
2012-01-23bgpd: IPv6 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv6 SAFI_MULTICAST BGP routes into the BGP Multicast RIB. 2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
2012-01-23zebra: IPv4 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv4 SAFI_MULTICAST BGP routes into the RTM's RIB. 2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the RTM's RIB.
2012-01-23bgpd: IPv4 MP-BGP Routes addition and deletionG.Balaji
This patch contains the following: 1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB. 2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
2012-01-20zebra: include MTU option in RA on request (BZ#665)Denis Ovsienko
This implements a new "ipv6 nd mtu <1-65535>" interface-level command. * doc/ipv6.texi: add description * zebra/rtadv.c * rtadv_send_packet(): send option type 5, when configured * ipv6_nd_mtu(): new VTY helper * no_ipv6_nd_mtu(): ditto * rtadv_config_write(): add new option * rtadv_init(): list new helpers
2012-01-09bgpd: reinstate zlookup checks, required for BGP without zebraPaul Jakma
* bgp_nexthop.c: The nexthop lookup cache has to return success for queried nexthops if bgpd isn't connected to zebra, or else BGP without zebra doesn't work.
2012-01-08Marker merge for 'RE-0.99.17.6'Paul Jakma
This marker merge (i.e. an 'ours' strategy merge) is a placeholder to show that all commits in Quagga-RE stable, to its release RE-0.99.17.6 tag, have been reviewed and merged into 'master'.
2012-01-08bgpd: Fix incorrect attribute type code in call to bgp_attr_malformedPaul Jakma
2012-01-08bgpd: Improve flag error messages in bgp_attr_aspathPaul Jakma
* bgpd/bgp_attr.c: (bgp_attr_aspath) error message could be misleading, clearly log what flag was incorrect. (Problem noted in "bgpd: fix error message in bgp_attr_aspath()" in Quagga-RE)
2012-01-08lib: use prefix bit length macrosDenis Ovsienko
2012-01-08ospfd: use IS_LSA_SELF() where appropriateDenis Ovsienko
2012-01-08bgpd: rewrite attr flag error loggingDenis Ovsienko
* bgp_attr.c * attr_flag_str: new message list * bgp_attr_flags_diagnose(): new function, implements previously added error logging in a generic way * bgp_attr_origin(): use bgp_attr_flags_diagnose() * bgp_attr_nexthop(): ditto * bgp_attr_med(): ditto * bgp_attr_local_pref(): ditto * bgp_attr_atomic(): ditto * bgp_attr_originator_id(): ditto * bgp_attr_cluster_list(): ditto * bgp_mp_reach_parse(): ditto * bgp_mp_unreach_parse(): ditto
2012-01-08doc: "[no] router zebra" does not belong to ospfdDenis Ovsienko
2012-01-08ospfd: justify ospf_default_originate_timer()Denis Ovsienko
The function is implemented in ospf_lsa.c, move its "extern" declaration to ospf_lsa.h for consistency.
2012-01-08ospfd: address more trivial compiler warningsDenis Ovsienko
* ospf_ase.c * ospf_ase_complete_direct_routes(): dismiss unused variable
2012-01-08ospf6d: ospf6_lsa_cmd_init() does not existDenis Ovsienko
2012-01-08bgpd: improve "show ip bgp scan detail"Denis Ovsienko
* bgp_nexthop.c (show_ip_bgp_scan_tables): access proper structure field in AF_INET6 case, handle ifindex NH type properly
2012-01-08bgpd: dismiss some zlookup checksDenis Ovsienko
bgp_nexthop_onlink(): zlookup is not used here at all bgp_nexthop_lookup_ipv6(): rely on the detection performed by "query" function (this also changes the fallback value to 0), reorder if-block bgp_nexthop_lookup(): idem
2012-01-08bgpd: add "show ip bgp scan detail" commandDenis Ovsienko
* bgp_nexthop.c: (show_ip_bgp_scan) transform into show_ip_bgp_scan_tables(), which uses inet_ntop() and can dump nexthops on request; (show_ip_bgp_scan_detail_cmd) new function
2012-01-08bgpd: touch nexthop handling codeDenis Ovsienko
bgp_nexthop_lookup_ipv6(): declare variables where they are actually used, drop no-op initialization (the field is already 0) bgp_nexthop_lookup(): ditto bgp_nexthop_check_ebgp(): rename to bgp_nexthop_onlink() bgp_nexthop_cache_changed(): rename to bgp_nexthop_cache_different()
2012-01-06lib/if: trivial, fix rarely used if debug function to print everythingPaul Jakma
* if.c: (if_dump) loop that doesn't do anything, wants to be before the zlog of what it's meant to print out so all the connected addresses get printed out. Trival: just a debug function
2012-01-06general: remove inline qualifiers and move in-header functions to objectsPaul Jakma
* (general) Move functions in headers into files, to be compiled into shared object files. Remove inline qualifier from functions. Let the compiler do the work.
2012-01-05version RE-0.99.17.6Denis Ovsienko
2012-01-02doc: update BGP RFC referencesDenis Ovsienko
2012-01-02zebra: fix IPv6 RA wrt interface removal (BZ#480)Denis Ovsienko
2012-01-02zebra: fix ifindex test condition (BZ#487)Matthias Ferdinand
When the same ip address is used on several interfaces, and one of them gets deleted (or equivalent: set to down and then address removed), rib_delete_ipv[46] will also remove the connected route from other interfaces. rib_delete_ipv[46] is called twice when an interface is deleted: - for the "ifdown" event - for the address removal (note: this may be specific to the netlink interface of linux) The second call does not find the connected route to that same ifindex anymore, but deletes similar connected routes to any other ifindex instead. Reason: the ifindex check is on the same level as the check for ZEBRA_ROUTE_CONNECT/NEXTHOP_TYPE_IFINDEX. If everything matches except for the ifindex, the "else" part (intended for different route types) is executed, thus removing the route from the wrong interface. fix: move ifindex check inside the "then" part of the check for ZEBRA_ROUTE_CONNECT/NEXTHOP_TYPE_IFINDEX. Now connected routes to other ifindexes will not spill over to the "else" part for different route types anymore.
2012-01-02ospf6d: fix compiler warning messagesVyacheslav Trushkin
* fix disagreement with C99 in zlog_debug calls Format specifier in some zlog_debug calls for size_t values was changed in order to C99 ('%u' -> '%zu'). * fix -Wsign-compare warnings Type of return value of ospf6_packet_max() was changed.
2012-01-02lib: fix some strtoul() use casesUlrich Weber
...otherwise 4294967295 is not a valid value on 32bit systems
2012-01-02ospf6d: Route locking (memory) cleanupTom Goff
* ospf6_route.c: (ospf6_route_best_next) Allows unlock route, even when there's no next route. This is consistent with how ospf6_route_next() behaves. * ospf6_intra.c: (ospf6_intra_prefix_lsa_remove) Make sure the last route considered is always unlocked. This is needed when the for loop terminates because ospf6_route_is_prefix() returns zero. Signed-off-by: Vyacheslav Trushkin <me@dogonthesun.net>
2012-01-02ospf6d: Have ospf6d cleanup when it terminates normallyTom Goff
A clean exit makes it easier to use memory debuggers. * ospf6_asbr.c: (ospf6_asbr_terminate) Add a function to do route map cleanup. * ospf6_lsa.c: (ospf6_lsa_terminate) Add a function to cleanup the lsa handler vector. * ospf6_main.c: (ospf6_exit) Add an function that causes ospf6d to gracefully exit. * ospf6_message.c: (ospf6_message_terminate) Add a function that frees the send and receive buffers. * ospf6_top.c: (ospf6_delete) Enable the ospf6_delete() function. Disable ospf6 before freeing everything. Signed-off-by: Vyacheslav Trushkin <me@dogonthesun.net> Conflicts: ospf6d/ospf6_lsa.h
2012-01-02lib: Add a function to delete all interfacesTom Goff
if.c: (if_terminate) This adds a cleanup function that can be called when a daemon exits, similar to vty_terminate().
2012-01-02doc: update BGP RFC referencesDenis Ovsienko