summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-03-082005-03-08 Paul Jakma <paul.jakma@sun.com>paul
* command.c: (banner_motd_file_cmd) use XSTRDUP/XFREE * vty.c: (vty_hello) suggestions from Andrew, read by line and stub out trailling non-printable characters on each line thus allowing us to specify VTY_NEWLINE to vty_out.
2005-03-082005-03-08 Jeroen Massar <jeroen@unfix.org>paul
* vty.c: (vty_hello) display motd file, if set * command.h: add char *motdfile to struct host * command.c: (config_write_host) write out motdfile config (banner_motd_file_cmd) new command, allow motd to be read from file. (no_banner_motd_cmd) free motdfile string, if needs be. (cmd_init) init (struct host).motdfile. Add new motd file commands.
2005-03-07 * isis_spf.c: host.name might be NULL.hasso
[backport candidate]
2005-03-07 * command.c: host.name might be NULL.hasso
* vty.c: Fix fd leak. [backport candidate]
2005-03-07 * if_proc.c, ipforward_proc.c, rtread_proc.c: Fix fd leaks.hasso
[backport candidate]
2005-03-06 * interface.c: Fix CRC and frame errors statistics in Linux.hasso
2005-03-02Fix segfault when ospf6_create() is not called yet.jardin
Thanks to Mohit Thakur.
2005-02-282005-02-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zserv.c: Must include network.h and buffer.h for non-blocking I/O. Remove global message_queue and t_write (need separate buffering for each client). (zebra_server_dequeue,zebra_server_enqueue) Remove functions related to old buggy buffering code. (zserv_delayed_close) New thread callback function to delete a client. (zserv_flush_data) New thread callback function to flush buffered data to client. (zebra_server_send_message) Rewritten to use buffer_write (so buffering of writes and non-blocking I/O work properly). (zsend_interface_add,zsend_interface_delete,zsend_interface_address, zsend_interface_update) Return 0 instead of -1 if !client->ifinfo (this is not really an error). Return value from zebra_server_send_message. (zsend_route_multipath,zsend_ipv4_nexthop_lookup, zsend_ipv4_import_lookup) Return value from zebra_server_send_message. (zsend_ipv6_nexthop_lookup) Fix scope to static, and return value from zebra_server_send_message. (zsend_router_id_update) Must use zebra_server_send_message instead of deprecated writen function. Return 0 instead of -1 if this client is not subscribed to router-id updates (since this is not really an error). (zread_interface_add) Change type to static int. If zsend_interface_add fails or zsend_interface_address fails, return -1 immediately (since the client has had an I/O error). (zread_interface_delete,zread_ipv4_add,zread_ipv4_delete, zread_ipv6_add,zread_ipv6_delete,zread_router_id_delete) Return 0 to indicate success. (zread_ipv4_nexthop_lookup) Return value from zsend_ipv4_nexthop_lookup. (zread_ipv4_import_lookup) Return value from zsend_ipv4_import_lookup. (zebra_read_ipv6) Remove unused function. (zread_ipv6_nexthop_lookup) Return value from zsend_ipv6_nexthop_lookup. (zread_router_id_add) Return value from zsend_router_id_update. (zebra_client_close) Call buffer_free(client->wb) and thread_cancel(client->t_suicide). (zebra_client_create) Allocate client->wb using buffer_new. (zebra_client_read) Support non-blocking I/O by using stream_read_try. Use ZEBRA_HEADER_SIZE instead of 3. (zebra_accept) Fix bug: reset accept thread at top. Make client socket non-blocking using the set_nonblocking function. (config_write_forwarding) Fix scope to static. (zebra_init) Remove initialization code for old buggy write buffering. * zserv.h: Add 2 new fields to struct zserv: struct buffer *wb (to enable buffered writes with non-blocking I/), and struct thread *t_suicide to support delayed close on I/O errors. * router-id.h: Remove prototypes for zread_router_id_add and zread_router_id_delete (their scope should be static to zserv.c).
2005-02-242005-02-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* redistribute.c: (zebra_check_addr,is_default, zebra_redistribute_default,zebra_redistribute) Fix scope to be static.
2005-02-242005-02-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* stream.c: (stream_read_try) Log a warning message if a fatal I/O error occurs. (stream_fifo_new) Fix prototype. * stream.h: Fix prototype for stream_fifo_new (need void arg).
2005-02-23add release procedure, noting redhat spec oddnessgdt
2005-02-232005-02-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* {vty.h,vty.c}: Remove vty_finish (duplicate of vty_reset). * isis_main.c: (reload) Call vty_reset instead of vty_finish (both functions were exactly the same).
2005-02-232005-02-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospfd.h: Add new field struct stream *ibuf to struct ospf. * ospfd.c: (ospf_new) Check return code from ospf_sock_init. Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1). (ospf_finish) Call stream_free(ospf->ibuf. * ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then pass it to ospf_recv_packet for use in receiving the packet (instead of allocating a new stream for each packet received). Eliminate all calls to stream_free(ibuf). (ospf_recv_packet) The struct stream *ibuf is now passed in as an argument. No need to use recvfrom to peek at the packet header (to see how big it is), just use ospf->ibuf which is always large enough (this eliminates a system call to recvfrom). Therefore, no need to allocate a stream just for this packet, and no need to free it when done.
2005-02-232005-02-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* buffer.h: Make the struct buffer and struct buffer_data structures private by moving them inside buffer.c. Add comments for all functions. Rename buffer_write as buffer_put (to be more consistent with the buffer_putc and buffer_putstr functions). Declare a new buffer_write function that is used to write data to a file descriptor and/or add it to the buffer queue. Remove unused function buffer_flush_vty_all. Create a new enum typedef buffer_status_t to be used as the return code for all buffer_flush* functions and buffer_write. * buffer.c: The struct buffer and struct buffer_data declarations are now private to this file. In conjunction with that, remove some unnecessary fields: struct buffer (alloc, unused_head, unused_tail, length), struct buffer_data (prev). (buffer_data_new) Removed: functionality incorporated into buffer_add. (buffer_data_free) Removed: use a macro BUFFER_DATA_FREE instead. (buffer_new) Use calloc instead of malloc + memset(zero). Supply an appropriate default size if the specified size is 0. (buffer_free) Eliminate code duplication by calling buffer_reset to free the contents of the buffer (and remove unused code related to unused_head). (buffer_empty,buffer_putc,buffer_putstr) Aesthetic change (make more compact). (buffer_reset) Use macro BUFFER_DATA_FREE. No need to set alloc and length to 0 (these fields have been removed). (buffer_add) Fix scope to be static. Call XMALLOC directly instead of calling removed buffer_data_new function. Simplify the logic (since it's now a singly-linked list instead of doubly-linked). (buffer_write) Renamed to buffer_put. Change to void, since return code of 1 was meaningless. No need to adjust length field, since it has been removed. (buffer_putw,buffer_flush,buffer_flush_vty_all,buffer_flush_vty) Remove unused functions. (buffer_flush_all) Rewrite using buffer_flush_available to eliminate a possible failure mode if IOV_MAX is less than the number of buffers on the queue. (buffer_flush_window) Incorporate logic from buffer_flush_vty. Log an error message if there is a writev error. (buffer_flush_available) Be more paranoid: check for case where buffer is already empty. Use new ERRNO_IO_RETRY macro, and use new enum for return codes. Simplify deletion logic (since it's now a singly-linked list). (buffer_write) New function for use with non-blocking I/O. * vty.h: Replace the struct vty sb_buffer field with a fixed-size (5-character) sb_buf field and an sb_len field, since using a struct buffer was inappropriate for this task. Add some useful comments about telnet window size negotiation. * vty.c: Include <arpa/telnet.h> (no longer included by zebra.h). Remove VTY_OBUF_SIZE (instead use buffer_new default size). Make telnet_backward_char and telnet_space_char static const. (vty_out) Replace buffer_write with buffer_put. (vty_log_out) Check for I/O errors. If fatal, close the vty session. Consolidate 3 separate writes into a single write call. (vty_will_echo,vty_command,vty_next_line,vty_previous_line, vty_end_config,vty_describe_fold,vty_clear_buf,vty_serv_sock_addrinfo, vty_serv_sock_family,vty_serv_un,vty_use_backup_config,exec_timeout, vty_config_write,vty_save_cwd) Fix scope to static. (vty_new) Let buffer_new use its default buffer size. (vty_write) Fix signature: 2nd arg should be const char *. Replaced buffer_write with buffer_put. (vty_telnet_option) Fix minor bug (window height or width greater than 255 was broken). Use sb_buf and sb_len instead of removed sb_buffer (which was being used improperly). (vty_read) On error, use ERRNO_IO_RETRY to decide whether it's fatal. If the error is fatal, call buffer_reset so vty_close does not attempt to flush the data. Use new sb_buf and sb_len instead of sb_buffer to store the SB negotiation string. (vty_flush) When vty->lines is 0, call buffer_flush_available instead of buffer_flush_window. Look at the return code from buffer_flush to detect I/O errors (and in that case, log an error message and close the vty). (vty_create) Fix scope to static. Initialize sb_len to 0 instead of creating sb_buffer. (vty_accept) Set socket nonblocking. (vtysh_accept) Use new set_nonblocking function instead of calling fcntl directly. (vtysh_flush) New function called from vtysh_read (after command execution) and from vtysh_write. This flushes the buffer and reacts appropriately to the return code (by closing the vty or scheduling further flushes). (vtysh_read) Check whether error is fatal using ERRNO_IO_RETRY. If not, just try again later. Otherwise, call buffer_reset before calling vty_close (to avoid trying to flush the buffer in vty_close). Fix logic to allow case where a command does not arrive atomically in a single read call by checking for the terminating NUL char. (vtysh_write) Use new vtysh_flush helper function. (vty_close) No need to call buffer_empty, just call buffer_flush_all in any case (it will check whether the buffer is empty). Do not free sb_buffer (since it has been removed). (vty_log_fixed) Use writev instead of write. * zebra.h: Do not include <arpa/telnet.h>, since this is used only by lib/vty.c.
2005-02-23 * bgp_route.c: Make reannouncing prefixes with changed attributeshasso
work again.
2005-02-23Added -p to the recommended diff flags.hasso
2005-02-23 * ospf_lsa.h: New flag to the LSA structure for the SPF calculation.hasso
* ospf_lsdb.h: Export ospf_lsdb_clean_stat() function. * ospf_spf.h: Add link to the LSA stat structure into vertex. * ospf_spf.c: New functions cmp() and update_stat() to manage candidates. Remove ospf_spf_has_vertex(), ospf_vertex_lookup(), ospf_install_candidate() and ospf_spf_register() functions not needed any more. Update ospf_vertex_new(), ospf_spf_next() and ospf_spf_calculate() functions to use pqueue instead of linked list.
2005-02-21 * pqueue.[ch]: Introduce "update" function to meet ospf spf needs. Ithasso
will allow to update node when: i) a node is inserted into the priority queue; ii) a node position is modified in the priority queue; * pqueue.h: Export trickle_down() function.
2005-02-21 * ospf_ase.c: Don't show messages related to the ase calculations ifhasso
we are not debugging.
2005-02-20 * rt_netlink.c: Don't show messages "ignoring message type 0x001[89]"hasso
if we are not debugging.
2005-02-19 * ospf_api.h: char isn't always signed, but it has to be it here.hasso
Fixes bugzilla #153. [backport candidate]
2005-02-19 * configure.ac: Fix Linux detection. Host types like i686-pc-linuxhasso
didn't match the pattern. Fixes bugzilla #150. [backport candidate]
2005-02-192005-02-19 Paul Jakma <paul@dishone.st>paul
* zserv.c: (zebra_read_ipv6) replace the char * arithmetic with STREAM_READABLE.
2005-02-192005-02-19 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: (ospf_stream_copy) remove (ospf_packet_dup) use stream_copy instead of ospf_stream_copy
2005-02-192005-02-19 Paul Jakma <paul.jakma@sun.com>paul
* stream.c: (stream_new) fix dumb mistake.
2005-02-172005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* watchquagga.c: (handle_read) Use new ERRNO_IO_RETRY macro.
2005-02-172005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* stream.c: (stream_read_try) Use new ERRNO_IO_RETRY macro.
2005-02-172005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* network.h: Define a new ERRNO_IO_RETRY macro to test whether an I/O operation should be retried. This eliminates the need to duplicate the same logic testing for EAGAIN or EINTR in multiple places.
2005-02-172005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_recv_packet) If there is somehow a runt packet in the queue, it must be discarded. Improve warning messages. Fix scope to static. (ospf_read) Fix bug: should reset the read thread in all cases to make sure we continue to get incoming messages.
2005-02-162005-02-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* watchquagga.c: (try_connect) Use new set_nonblocking function instead of calling fcntl directly.
2005-02-162005-02-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* stream.h: Declare new function stream_read_try suitable for use with non-blocking file descriptors. Indicate that stream_read and stream_read_unblock are deprecated. * stream.c: (stream_read_try) New function for use with non-blocking I/O. (stream_recvmsg) Should return -1 if the stream is too small to contain the data.
2005-02-162005-02-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* network.c: (set_nonblocking) Should check return code from fcntl(F_GETFL).
2005-02-162005-02-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* network.h: Declare new function set_nonblocking. Indicate that readn and writen are deprecated. * network.c: (set_nonblocking) New function to make a file descriptor non-blocking, since it seems silly to have fcntl calls sprinkled throughout the code.
2005-02-15Adjust size complexity estimates. Still not quite right, but closer.gdt
2005-02-152005-02-15 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: (ospf_recv_packet) Fix silly error wrt allocating ibuf. Thanks Andrew.
2005-02-142005-02-14 Paul Jakma <paul@dishone.st>paul
* Not all Linux netlink systems have IFLA_WIRELESS
2005-02-14- oops, date was wrong in actual ChangeLogpaul
2005-02-142005-02-14 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: (ospf_recv_packet) use stream_recvmsg. 2005-02-11 Hasso Tepper <hasso at quagga.net> * ospf_lsdb.c: Fix sum of checksums calculation. 2005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the error message. 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.h: Reduce structure padding by putting new u_char field multicast_memberships in a better spot (grouped with other u_char fields type and state). 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.h: Improve passive_interface comment. Add new multicast_memberships bitmask to struct ospf_interface to track active multicast subscriptions. Declare new function ospf_if_set_multicast. * ospf_interface.c: (ospf_if_set_multicast) New function to configure multicast memberships properly based on the current multicast_memberships status and the current values of the ospf_interface state, type, and passive_interface status. (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is now handled by ism_change_state's call to ospf_if_set_multicast). (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now handled by ism_change_state). * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave the DRouters multicast group (now handled by ism_change_state's call to ospf_if_set_multicast). (ism_change_state) Add call to ospf_if_set_multicast to change multicast memberships as necessary to reflect the new interface state. * ospf_packet.c: (ospf_hello) When a Hello packet is received on a passive interface: 1. Increase the severity of the error message from LOG_INFO to LOG_WARNING; 2. Add more information to the error message (packet destination address and interface address); and 3. If the packet was sent to ospf-all-routers, then try to fix the multicast group memberships. (ospf_read) When a packet is received on an interface whose state is ISM_Down, enhance the warning message to show the packet destination address, and try to update/fix the multicast group memberships if the packet was sent to a multicast address. When a packet is received for ospf-designated-routers, but the current interface state is not DR or BDR, then increase the severity level of the error message from LOG_INFO to LOG_WARNING, and try to fix the multicast group memberships. * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from active to passive. (no_ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from passive to active. (show_ip_ospf_interface_sub) Show multicast group memberships. 2005-02-08 Paul Jakma <paul@dishone.st> * ospf_packet.c: (various) Remove unneeded stream_set_putp abuse. 2005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down, not for event ISM_InterfaceDown. And improve the message by adding the interface flags. 2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_network.c: (ospf_sock_init) Save errno before calling ospfd_privs.change. 2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print an error message and return. (ospf_read) If the interface state is ISM_InterfaceDown, issue a warning message and ignore the packet. 2005-01-10 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_packet.h: Remove commented out definition of OSPF_MAX_PACKET; neither it or the uncommented one are used any more. * ospf_packet.c (ospf_make_ls_upd): Leave room for authentication when deciding if an update will fit. (ospf_packet_authspace): Factor out calculation of size required for authentication. (ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET. Don't confuse readers that there is a macro. 2004-12-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_network.c: Improve all setsockopt error messages to give detailed information on the arguments. 2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done" messages from LOG_WARNING to LOG_INFO, since this seems to be normal. 2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_read) Always look up the interface if ospf_recv_packet returns NULL ifp, since some platforms such as Solaris 8 appear to support ifindex retrieval but don't. 2004-12-22 Hasso Tepper <hasso at quagga.net> * ospf_dump.c: Show debug configuration in vtysh. * ospf_vty.c: Fix "show ip ospf" output. Router can't be elected in any case if it's configured as "translate-never". * ospf_lsdb.[ch]: New function to calculate sum of checksums. * ospf_vty.c: Bugfix to show really number of AS external LSAs, not number of all LSAs with AS scope, this includes opaque as LSAs as well, show this number separately. Show numbers and sums of checksums for each type of LSAs. * ospf_lsa.c: Calculate checksum before putting LSA into database. 2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.h: Declare new function ospf_default_iftype. * ospf_interface.c: (ospf_default_iftype) New function to centralize this logic in one place. * ospf_zebra.c: (ospf_interface_add) Use new function ospf_default_iftype. * ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic by using new function ospf_default_iftype. 2004-12-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc) Should be static, not global. (ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning messages to include identifying information (e.g. router id). * ospf_nsm.c: (nsm_change_state) Improve info message to include router id and state names. 2004-12-09 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_apiserver.c (ospf_apiserver_term): Obtain struct ospf_apiserver * from listnode. Remove unused variables. Follows suggestion from Jay Fenlason. 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * *.c: Change level of debug messages to LOG_DEBUG. 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_main.c: (main) The 2nd argument to openzlog has been removed. 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message from LOG_NOTICE to LOG_DEBUG. 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. 2004-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning message and in comment. (ospf_db_desc) Warning message that a packet is being discarded should give the router id of the packet source. Fix spelling of packet in two warning messages. (ospf_ls_req) Warning message that a link state request is being discarded should give the router id of the neighbor that sent it. 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_main.c: Remove #include "debug.h" (was not being used, and lib/debug.h has now been deleted). 2004-11-25 Hasso Tepper <hasso at quagga.net> * ospf_main.c: Make group to run as configurable. 2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_packet.c (ospf_recv_packet): Assume CMSG_SPACE is present and works (lib/zebra.h provides if OS doesn't). 2004-11-15 Paul Jakma <paul@dishone.st> * ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock. 2004-11-12 Paul Jakma <paul@dishone.st> * ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to ignore stub area summary default. Even so it seems a strange check, add a comment to that effect. 2004-11-04 Paul Jakma <paul@dishone.st> * ospfd.c: (ospf_network_match_iface) revert to previous network statement match behaviour. 2004-11-02 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points to it. Add convenience pointer to msg->msg_iov[1], and use this, fixing the unfortunate borkenness introduced in moving of this code to a function. (ospf_write) remove iovp and fix up call to previous. (ospf_ls_upd_packet_new) cast size to long int - unfortunately glibc's size_t format modifier is not portable. 2004-10-31 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_write_frags) Add debug output (ospf_write) set type early, so we can pass it to ospf_write_frags. (ospf_ls_upd_packet_new) print size in debug output when too large packet is encountered. * ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of THREAD_ARG to store an integer, but it should at least use same same type to retrieve the value. Assert value is sane. 2004-10-22 Paul Jakma <paul@dishone.st> * ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex() function. * ospf_packet.c: (ospf_read) manually look up ifindex if system could not have returned one, eg openbsd, thanks to Rivo Nurges for highlighting problem and fix. Change setsockopt_pktinfo to setsockopt_ifindex. 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com> * ospf_snmp.c: (ospf_snmp_if_update) Fix logic to handle PtP links with dedicated subnets properly. * ospf_lsa.c: (lsa_link_ptop_set) ditto. * ospfd.c: (ospf_network_match_iface) ditto. (ospf_network_run) ditto. * ospf_interface.c: (ospf_if_is_configured) ditto. (ospf_if_lookup_by_prefix) ditto. (ospf_if_lookup_recv_if) ditto. * ospf_vty.c: (show_ip_ospf_interface_sub) Display the peer or broadcast address if present. 2004-10-13 Hasso Tepper <hasso at quagga.net> * ospf_main.c: Unbreak compilation with ospfapi disabled. * ospf_snmp.c: Remove defaults used to initialize smux connection to snmpd. Connection is initialized only if smux peer is configured. 2004-10-12 Hasso Tepper <hasso at quagga.net> * ospf_main.c, ospf_opaque.c: Unbreak ospfclient compilation - move static variable from ospf_main.c into ospf_opaque.c. 2004-10-11 Hasso Tepper <hasso at quagga.net> * ospf_main.c, ospf_opaque.c: Disable ospfapi init by default. New command line switch to enable it. 2004-10-11 Paul Jakma <paul@dishone.st> * ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order remove ntohs that should have dissappeared. Take struct ip as argument, caller has to know there's an IP header at start of stream anyway. * ospf_dump.h: update declaration of ospf_ip_header_dump. * ospf_packet.c: (ospf_write) correct call to sockopt_iphdrincl_swab_htosys which was munging the header. (ospf_recv_packet) ip_len is needed for old OpenBSD fixup. (ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as we have it. * (global) Const char update and signed/unsigned fixes. * (various headers) size defines should be unsigned. * ospf_interface.h: remove duplicated defines, include the authoritative header - though, these defines should probably be moved to a dedicated header, or ospfd.h. * ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned. * ospf_packet.c: (ospf_write) cast result of shift to unsigned. 2004-10-08 Hasso Tepper <hasso at quagga.net> * *.[c|h]: Fix compiler warnings: make some strings const, signed -> unsigned, remove unused variables etc. 2004-10-07 Greg Troxel <gdt@claude.ir.bbn.com> * ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't use of variable names 'node' and 'nextnode' to avoid possible conflict with list macros. Move variable declaration inside for loop after a statement to top of function. 2004-10-07 Paul Jakma <paul@dishone.st> * ospf_snmp.c: Missed list typedef update * ospf_dump.c: Include sockopt.h for header swab functions. 2004-10-05 Paul Jakma <paul@dishone.st> * ospf_packet.c: replace ospf_swap_iph_to... with sockopt_iphdrincl_swab_... 2004-10-03 James R. Leu <jleu at mindspring.com> * ospf_zebra.c: Read router id related messages from zebra daemon. Schedule router-id update thread if it's changed. * ospfd.c: Remove own router-id selection function. Use router id from zebra daemon if it isn't manually overriden in configuration. 2004-09-27 Paul Jakma <paul@dishone.st> * ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER Apply to offset too. Print ip_cksum, lets not worry about possible 2.0.37 compile problems. * ospf_packet.c: (ospf_swap_iph_to{n,h}) Use HAVE_IP_HDRINCL_BSD_ORDER. (ospf_recv_packet) ditto. (ospf_write) Fixup iov argument to ospf_write_frags. (struct msghdr).msg_name is caddr_t on most platforms. (ospf_recv_packet) ditto. And msg_flags is not always there memset struct then set fields we care about rather than initialise all fields individually. 2004-09-26 Hasso Tepper <hasso at quagga.net> * ospf_abr.c, ospf_dump.c, ospf_lsa.c, ospf_packet.c, ospf_vty.c, ospf_zebra.c: Fix compiler warnings. 2004-09-24 Paul Jakma <paul@dishone.st> * ospf_apiserver.{c,h}: lists typedef removal cleanup. update some list loops to LIST_LOOP. some miscellaneous indent fixups. (ospf_apiserver_unregister_opaque_type) fix listnode_delete of referenced node in loop. (ospf_apiserver_term) loops calling ospf_apiserver_free, which deletes referenced nodes from apiserver_list, fixed. * ospf_interface.h: lists typedef removal cleanup. * ospf_opaque.{c,h}: lists typedef removal cleanup. update some list loops to LIST_LOOP. miscellaneous style and indent fixups. * ospf_te.{c,h}: ditto * ospf_packet.c: lists typedef removal cleanup. (ospf_write) ifdef fragmentation support. move actual fragmentation out to a new, similarly ifdefed, function. (ospf_write_frags) fragmented write support, moved from previous. 2004-09-23 Hasso Tepper <hasso at quagga.net> * *.[c|h]: list -> struct list *, listnode -> struct listnode *. 2004-09-12 Paul Jakma <paul@dishone.st> * ospf_packet.c: Fix bugzilla #107 (ospf_packet_max) get rid of the magic 88 constant (ospf_swab_iph_ton) new function. set ip header to network order, taking BSDisms into account. (ospf_swab_iph_toh) the inverse. (ospf_write) Add support for IP fragmentation, will only work on linux though, other kernels make it impossible. get rid of the magic 4 constant. (ospf_make_ls_upd) Bound check to end of stream, not to interface mtu. (ospf_ls_upd_packet_new) New function, allocate upd packet taking oversized LSAs into account. (ospf_ls_upd_queue_send) use ospf_ls_upd_packet_new to allocate, rather than statically allocating mtu sized packet buffer, which actually was wrong - it didnt take ip header into account, which should not be included in packet buffer. (ospf_ls_upd_send_queue_event) minor tweaks and remove TODO comment. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_spf.c (ospf_spf_calculate): Many more comments and debug print statements. New function ospf_vertex_dump used in debugging. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_spf.h (struct vertex): Comments for flags and structure members. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_route.c: When finding an alternate route, log cost as well. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_interface.c (ospf_lookup_if_params): Initialize af in struct prefix allocated on stack. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_packet.c (ospf_ls_ack_send_delayed): In p2mp mode, send acks to AllSPFRouters, rather than All-DR. 2004-08-27 Hasso Tepper <hasso at quagga.net> * ospf_vty.c: Don't print ospf network type under interface only if interface is in broadcast mode and interface type really is broadcast. Fixes Bugzilla #108. 2004-08-27 David Wiggins <dwiggins@bbn.com> * ospf_spf.c (ospf_nexthop_calculation): Initialize address family in on-stack struct prefix_ipv4. Fixes point-to-multipoint SPF calculation. 2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_packet.c (ospf_recv_packet): adjust size declaration of buffer used to get interface index so that it compiles on other than Linux and includes the required alignment space. Probably this was only working on sparc/sparc64 because most of sockaddr_dl was not being written. 2004-08-19 Paul Jakma <paul@dishone.st> * ospf_packet.c: update to match sockopt renames. 2004-08-04 Paul Jakma <paul@dishone.st> * ospf_spf.c: (ospf_spf_consider_nexthop) Add comment about issue. Compare only against list head - all nexthops must be same cost anyway, fixes a reference-listnode-after-delete bug noted by Kir Kostuchenko. (ospf_nexthop_calculation) Use ospf_spf_consider_nexthop for all candidates attached to root. 2004-07-27 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_ls_upd_send_queue_event) fix thinko from last fix for ospfd wedging due to oversize LSAs: dont list loop on ospf_ls_upd_queue_send() - guaranteed segfault. 2004-07-27 Paul Jakma <paul@dishone.st> * ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out the LSA as then free_opaque_info_per_id() can never unlock (and free) the LSA. Reported by Gunnar Stigen. 2004-07-23 Paul Jakma <paul@dishone.st> * ospf_network.c: Replace PKTINFO/RECVIF with call to setsockopt_pktinfo * ospf_packet.c: Use getsockopt_pktinfo_ifindex and SOPT_SIZE_CMSG_PKTINFO_IPV4. 2004-07-14 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for problem reported by Peter Frost amongst others, where function will spin indefinitely if update list contains LSAs greater than MTU-headers or other condition leading to update list never being cleared. Problem of what to do with these LSAs remains. (ospf_make_ls_upd) add comment about large LSA problem, indentation cleanup. 2004-07-01 Greg Troxel <gdt@fnord.ir.bbn.com> * Makefile.am (lib_LTLIBRARIES): make libospf shared 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> * Makefile.am: Add shlib support. 2004-06-10 Hasso Tepper <hasso@estpak.ee> * *: Removed ifdefs HAVE_NSSA. 2004-06-06 Paul Jakma <paul@dishone.st> * ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous. ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format 2004-05-31 Sagun Shakya <sagun.shakya@sun.com> * ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if index is out of range. ospf_flood.c: endianness fix ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum in various places. 2004-05-10 Hasso Tepper <hasso@estpak.ee> * ospf_zebra.c, ospfd.c: Move ospf_prefix_list_update() function to ospf_zebra.c from ospfd.c and add redistribution updates if route-map is used in redistribution. * ospf_main.c: Remove now useless call to ospf_init(). 2004-05-08 Paul Jakma <paul@dishone.st> * ospf_zebra.c: Sync with lib/zclient changes 2004-05-05 Paul Jakma <paul@dishone.st> * ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is defined. Warn at compile and runtime. Use IPTOS_PREC_INTERNETCONTROL otherwise. * ospf_packet.c: (ospf_associate_packet_vl) cleanup, move some of the checks up to ospf_read, return either a virtual link oi, or NULL. (ospf_read) Cleanup, make it responsible for checks. Remove the nbr lookup - moved to ospf_neighbor. Adjust all nbr lookups to use new wrappers exported by ospf_neighbor. * ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup. * ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface neighbour table by router-id for virtual-link ospf_interfaces, not by peer_addr (which breaks for asymmetric vlinks) (ospf_nbr_lookup) add a wrapper for nbr lookups to deal with above. * ospf_interface.c: (ospf_vl_set_params) Catch changes of interface address for either end of a virtual-link, and hence potential cost changes. 2004-04-22 Hasso Tepper <hasso@estpak.ee> * ospf_zebra.c: Don't ignore reject/bh routes, it's the only way to "summarize" routes in ASBR at the moment. 2004-04-20 Hasso Tepper <hasso@estpak.ee> * ospfd.c: Unset NP flag if area is going to be normal or stub. Fixes UNH OSPF_NSSA.1.2a comment. * ospf_abr.c: Originate default into stub/nssa area even if summaries are disabled. * ospf_zebra.c: Don't attempt to redistribute 127.0.0.0/8. 2004-04-19 Hasso Tepper <hasso@estpak.ee> * ospf_vty.c: Don't warn that export- and import-list can't be configured to backbone area if they are applied and are working fine. 2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com> * ospf_packet.c: Don't drop packets in Solaris x86. [quagga-dev 1005]. 2004-03-18 Amir Guindehi <amir@datacore.ch> * ospf_opaque.c: Attempt to correct the incorrect behavior of Quagga's ospfd in the special situation that a node's opaque capability has changed as "ON -> OFF -> ON". [quagga-dev 843]. 2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com> * ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range should be configured with the highest cost path within the range, not lowest. 2004-02-17 Paul Jakma <paul@dishone.st> * ospf_zebra.c: (ospf_interface_delete) Do not delete the interface params, nor the interface structure, if an interface delete message is received from zebra. * ospf_interface.c: (ospf_if_delete_hook) Delete the interface params and interface, ie that which was previously removed in (ospf_interface_delete) above. 2004-02-11 Hasso Tepper <hasso@estpak.ee> * ospf_interface.c, ospf_zebra.c: Don't attempt to read path->oi->ifp if oi doesn't exist any more. 2004-02-11 Vadim Suraev <vadim.suraev@terayon.com> * ospf_packet.c (ospf_ls_upd): Router should flush received network LSA if it was originated with older router-id ([zebra 14710] #6). 2003-12-08 Mattias Amnefelt <mattiasa@kth.se> * ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len network byte order. 2003-12-05 Greg Troxel <gdt@poblano.ir.bbn.com> * ospfd.c (ospf_network_match_iface): Rewrite code for clarity while trying not to change semantics. Add ifdefed-out code to avoid matching ppp interfaces whose destination address does not also match the prefix under consideration, to help out people with problems due to as-yet-unfixed bugs with p2p interfaces coming and going. 2003-07-25 kamatchi soundaram <kamatchi@tdd.sj.nec.com> * ospf_packet.c (ospf_ls_upd_send_queue_event): get next route node in body of the loop to avoid chance that route node is unlocked and deleted before the next iteration tries to get next route node. 2003-05-24 Kenji Yabuuchi * ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific match for interface lookup. 2003-05-18 Hasso Tepper <hasso@estpak.ee> * ospf_vty.c: Show NSSA LSA route info in "show ip ospf database" output 2003-05-16 Hasso Tepper <hasso@estpak.ee> * ospf_lsa.c: Fix handling of NSSA 2003-04-23 Hasso Tepper <hasso@estpak.ee> * ospf_vty.c: fix "router xxx" node commands in vtysh 2003-04-19 Hasso Tepper <hasso@estpak.ee> * {ospf_abr,ospfd}.c: area id's DECIMAL -> ADDRESS * ospf_routemap.c: sync daemon's route-map commands to have same syntax. 2003-04-19 Sergey Vyshnevetskiy <serg@vostok.net> * ospf_packet.c: Add missing param to zlog * ospf_flood.c: remove unused vars 2003-04-17 Denis Ovsienko <zebra@pilot.org.ua> * ospf_interface.c: fix incorrect memset 2003-04-10 Amir Guindehi <amir@datacore.ch> * ospf_lsa.[ch]: opaque LSA fix, use ospf_lookup. 2003-04-03 David Watson <dwatson@eecs.umich.edu> * ospf_lsa.c: byte order fix 2002-03-17 Amir Guindehi <amir@datacore.ch> * ospf_apiserver.[ch]: Merge Ralph Keller's OSPFAPI support. * ospf_api.[ch]: Merge Ralph Keller's OSPFAPI support. * ospfclient: OSPFAPI demonstration client. 2003-01-23 Masahiko Endo <endo@suri.co.jp> * ospf_ism.c: NSM event schedule bug fix. 2002-10-30 Greg Troxel <gdt@ir.bbn.com> * ospf_packet.c (ospf_make_md5_digest): MD5 length fix. 2002-10-23 endo@suri.co.jp (Masahiko Endo) * ospf_opaque.c: Update Opaque LSA patch. 2002-10-23 Ralph Keller <keller@tik.ee.ethz.ch> * ospf_vty.c (show_ip_ospf_database): Fix CLI parse. 2002-10-23 Juris Kalnins <juris@mt.lv> * ospf_interface.c (ospf_if_stream_unset): When write queue becomes empty stop write timer. 2002-10-10 Greg Troxel <gdt@ir.bbn.com> * ospf_packet.c (ospf_check_md5_digest): Change >= to > to make it conform to RFC. 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * zebra-0.93 released. 2002-06-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_spf.c (ospf_nexthop_calculation): Add NULL set to oi and check of l2. Reported by: Daniel Drown <dan-zebra@drown.org> (ospf_lsa_has_link): LSA Length calculation fix. Reported by: Paul Jakma <paulj@alphyra.ie>. * ospfd.c (ospf_if_update): Fix nextnode reference bug. Reported by: juris@mt.lv. 2002-01-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospfd.c: Merge [zebra 11445] Masahiko ENDO's Opaque-LSA support. 2001-08-27 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_interface.c (ospf_add_to_if): Use /32 address to register OSPF interface information. (ospf_delete_from_if): Likewise. * ospf_zebra.c (ospf_interface_address_delete): Likewise. 2001-08-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_zebra.c (ospf_redistribute_unset): When redistribute type is OSPF, do not unset redistribute flag. 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * zebra-0.92a released. 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * zebra-0.92 released. 2001-08-12 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospfd.c (ospf_config_write): auto-cost reference-bandwidth configuration display. 2001-07-24 David Watson <dwatson@eecs.umich.edu> * ospf_spf.c (ospf_spf_next): Modify ospf_vertex_add_parent to check for an existing link before connecting the parent and child. ospf_nexthop_calculation is also modified to check for duplicate entries when copying from the parent. Finally, ospf_spf_next removes duplicates when it merges two equal cost candidates. 2001-07-23 itojun@iijlab.net * ospfd.c (show_ip_ospf_neighbor): Check ospf_top before use it [zebra 8549]. 2001-07-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_packet.c (ospf_write): Remove defined(__OpenBSD__) to make it work on OpenBSD. 2001-06-26 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_zebra.c (config_write_ospf_default_metric): Display default-metric configuration. 2001-06-18 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_ia.h (OSPF_EXAMINE_SUMMARIES_ALL): Remove old macros. 2001-05-28 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_snmp.c (ospfIfEntry): Fix interface lookup bug to avoid crush. (ospfIfMetricEntry): Likewise. 2001-03-18 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_read): Fix typo. Reported by: "Jen B Lin'Kova" <jen@stack.net>. 2001-03-15 Gleb Natapov <gleb@nbase.co.il> * ospf_interface.c (ip_ospf_network): Set interface parameter. (interface_config_write): Add check for OSPF_IFTYPE_LOOPBACK. * ospf_zebra.c (ospf_interface_add): Set interface parameter. 2001-02-21 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_recv_packet): Solaris also need to add (iph.ip_hl << 2) to iph.ip_len. 2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org> * ospfd.h (OSPF_LS_REFRESH_TIME): Fix OSPF_LS_REFRESH_TIME value. Suggested by: David Watson <dwatson@eecs.umich.edu>. * ospf_zebra.c (zebra_init): Remove zebra node. * ospfd.c (ospf_area_range_set): Function name is changed from ospf_ara_range_cmd. (ospf_area_range_unset): New function which separated from DEFUN. New commands are added: "no area A.B.C.D range A.B.C.D/M advertise" "no area <0-4294967295> range A.B.C.D/M advertise" "no area A.B.C.D range A.B.C.D/M not-advertise" "no area <0-4294967295> range A.B.C.D/M not-advertise" * ospf_lsa.c (ospf_lsa_more_recent): Fix previous change. 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> * ospf_network.c (ospf_if_add_allspfrouters): Use setsockopt_multicast_ipv4. (ospf_if_drop_allspfrouters): Likewise. * ospf_lsa.c (ospf_router_lsa_install): Add rt_recalc flag. (ospf_network_lsa_install): Likewise. (ospf_summary_lsa_install): Likewise. (ospf_summary_asbr_lsa_install): Likewise. (ospf_external_lsa_install): Likewise. (ospf_lsa_install): Call ospf_lsa_different to check this LSA is new one or not. 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_zebra.c (ospf_interface_delete): Do not free interface structure when ospfd receive interface delete message to support pseudo interface. 2001-02-01 Dick Glasspool <dick@ipinfusion.com> * ospfd.c (area_range_notadvertise): Change area range "suppress" command to "not-advertise". * ospfd.h (OSPF_LS_REFRESH_TIME): Change OSPF_LS_REFRESH_TIME from 1800 to 60. * ospf_abr.c (ospf_abr_update_aggregate): When update_aggregate is updating the area-range, the lowest cost is now saved. * ospf_lsa.c (ospf_lsa_more_recent): Routing to compare sequence numbers rather than creating overflow during calculation. 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> * zebra-0.91 is released. 2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_db_desc_proc): Do not continue process when NSM_SeqNumberMismatch is scheduled. (ospf_ls_req): Free ls_upd when return from this function. (ospf_ls_upd_timer): When update list is empty do not call ospf_ls_upd_send(). Suggested by: endo@suri.co.jp (Masahiko Endo). 2001-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_lsa.c (ospf_maxage_flood): Flood LSA when it reaches MaxAge. RFC2328 Section 14. (ospf_maxage_lsa_remover): Call above function during removing MaxAge LSA. 2001-01-26 Dick Glasspool <dick@ipinfusion.com> * ospf_flood.c (ospf_flood_through_as): Function is updated for NSSA Translations now done at ospf_abr.c with no change in P-bit. * ospf_lsa.c (ospf_get_nssa_ip): Get 1st IP connection for Forward Addr. (ospf_install_flood_nssa): Leave Type-7 LSA at Lock Count = 2. * ospf_ase.c (ospf_ase_calculate_route): Add debug codes. * ospf_abr.c (ospf_abr_translate_nssa): Recalculate LSA checksum. * ospf_packet.h (OSPF_SEND_PACKET_LOOP): Added for test packet. * ospf_dump.c (ospf_lsa_type_msg): Add OSPF_GROUP_MEMBER_LSA and OSPF_AS_NSSA_LSA. * ospfd.c (data_injection): Function to inject LSA. This is debugging command. 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_route.c (ospf_route_match_same): Remove function. (ospf_route_match_same_new): Renamed to ospf_route_match_same. * ospf_zebra.c (ospf_interface_address_delete): Add check for oi->address. Suggested by Matthew Grant <grantma@anathoth.gen.nz>. (ospf_zebra_add): Remove function. (ospf_zebra_add_multipath): Rename to ospf_zebra_add. * ospf_interface.c: Remove HAVE_IF_PSEUDO part. * ospf_zebra.c: Likewise. 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_ase.c: Remove OLD_RIB part. * ospf_route.c: Likewise. * zebra-0.90 is released. * ospf_packet.c (ospf_recv_packet): Use ip_len adjestment code to NetBSD. 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_route.c (ospf_route_delete): Use ospf_zebra_delete_multipath. 2001-01-09 Matthew Grant <grantma@anathoth.gen.nz> * ospf_interface.c (ospf_if_cleanup): Function name is renamed from ospf_if_free(). Rewrite whole procudure to support primary address deletion. * ospf_zebra.c (ospf_interface_address_delete): Add primary address deletion process. 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_recv_packet): OpenBSD has same ip_len treatment like FreeBSD. 2001-01-09 endo@suri.co.jp (Masahiko Endo) * ospf_packet.c (ospf_recv_packet): FreeBSD kernel network code strips IP header size from receiving IP Packet. So we adjust ip_len to whole IP packet size by adding IP header size. 2001-01-08 endo@suri.co.jp (Masahiko Endo) * ospf_network.c (ospf_serv_sock): When socket() is failed return
2005-02-142005-02-14 Paul Jakma <paul.jakma@sun.com>paul
* stream.h: Unsigned long updated to size_t * stream.c: ditto * stream.h: Add stream_copy, stream_dup, stream_recvmsg. Add comment describing struct stream abstraction, and various other comments. Deprecate several unsafe/ambigious macros. Add STREAM_WRITEABLE and STREAM_READABLE. Add (stream_getl_from) for symmetry. Update stream_forward_{endp,getp} to use size_t offset. Make stream data a 0 length array, rather than a seperate malloc. * stream.c: Add consistency checks. Update to follow stream.h changes. (stream_new) Alloc stream+data in one go. (stream_copy) new function, copy a stream. (stream_dup) new function, dup a stream. (stream_recvmsg) new function, recvmsg data into a stream. (stream_empty) no need to check getp == 0.
2005-02-122005-02-12 Paul Jakma <paul.jakma@sun.com>paul
* stream.h: Unsigned long updated to size_t * stream.c: ditto
2005-02-11 * ospf_lsdb.c: Fix sum of checksums calculation.hasso
[backport candidate]
2005-02-10notes on what files contain what, and an initial stab at understandinggdt
how much storage is required.
2005-02-092005-02-09 Paul Jakma <paul.jakma@sun.com>paul
* (global) Update code to match stream.h changes. stream_get_putp effectively replaced with stream_get_endp. stream_forward renamed to stream_forward_getp. stream_forward_endp introduced to replace some previous setting/manual twiddling of putp by daemons. * lib/stream.h: Remove putp. Update reference to putp with endp. Add stream_forward_endp, which daemons were doing manually. Rename stream_forward to stream_forward_getp. lib/stream.c: Remove/update references to putp. introduce stream_forward_endp.
2005-02-092005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the error message.
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Reduce structure padding by putting new u_char field multicast_memberships in a better spot (grouped with other u_char fields type and state).
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Change macro definitions SET_FLAG and UNSET_FLAG to use compound assignment operators (aesthetic change).
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Improve passive_interface comment. Add new multicast_memberships bitmask to struct ospf_interface to track active multicast subscriptions. Declare new function ospf_if_set_multicast. * ospf_interface.c: (ospf_if_set_multicast) New function to configure multicast memberships properly based on the current multicast_memberships status and the current values of the ospf_interface state, type, and passive_interface status. (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is now handled by ism_change_state's call to ospf_if_set_multicast). (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now handled by ism_change_state). * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave the DRouters multicast group (now handled by ism_change_state's call to ospf_if_set_multicast). (ism_change_state) Add call to ospf_if_set_multicast to change multicast memberships as necessary to reflect the new interface state. * ospf_packet.c: (ospf_hello) When a Hello packet is received on a passive interface: 1. Increase the severity of the error message from LOG_INFO to LOG_WARNING; 2. Add more information to the error message (packet destination address and interface address); and 3. If the packet was sent to ospf-all-routers, then try to fix the multicast group memberships. (ospf_read) When a packet is received on an interface whose state is ISM_Down, enhance the warning message to show the packet destination address, and try to update/fix the multicast group memberships if the packet was sent to a multicast address. When a packet is received for ospf-designated-routers, but the current interface state is not DR or BDR, then increase the severity level of the error message from LOG_INFO to LOG_WARNING, and try to fix the multicast group memberships. * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from active to passive. (no_ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from passive to active. (show_ip_ospf_interface_sub) Show multicast group memberships.
2005-02-082005-02-08 Paul Jakma <paul@dishone.st>paul
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
2005-02-042005-02-04 Paul Jakma <paul@dishone.st>paul
* ripd.c: Untangle the construction of RIP auth data. (rip_auth_prepare_str_send) new helper function, prepare correct key string. (rip_auth_simple_write) new helper, write out the rip simple password auth psuedo-RTE. (rip_auth_md5_ah_write) new helper, write out the MD5 auth-header psuedo-RTE. (rip_auth_header_write) new helper, write out correct auth header data / psuedo-RTE. (rip_auth_md5_set) rip out the memmove and writing of the auth header psuedo-RTE. So that all that is left is to write the trailing auth digest, and update digest offset field in the original header. (rip_write_rte) rip out writing of RIP header, writing of simple auth data psuedo-RTE. Make it do what its name suggests, write out actual RTEs. (rip_output_process) remove the incorrect additional decrements of rtemax. Prepare the auth_str, which simple or MD5 auth will need. Move write out of RIP header and auth data to inside the loop. Adjust paramaters as required.
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (zlog_signal,zlog_backtrace_sigsafe) Eliminate use of fileno() since it is not async-signal-safe. (_zlog_assert_failed) Rewrite crashlog logic more compactly. (zlog_set_file,zlog_reset_file,zlog_rotate) Update logfile_fd for use in signal handler.